Can a single LOV return values to two different fields?

Hi,
I have a scenario where I already have a LOV in the form which is assigned to a Field A. This LOV returns the value to field A. I have another field B which needs the same list of values. I can assign the same LOV to the field B as well, but can the value selected be returned to B?
I can create another LOV with the same record group, but just wanted to know if its possible to use the same LOV again.
Thanks

Hi Karuna,
You can achieve this by providing a third column in LOV (whose column width can be set to 0 to prevent it from being visible in lov) which can be comma-separated of two fields. This third field can then be assigned to the form field. And a substr() function call can get you both values.
Hope this helps,
Anantha
[http://askanantha.blogspot.com]

Similar Messages

Will a sequence return same value for two different sessions?

Is there a possibility that a sequence will return same value to two different sessions when it is referred exactly at the same instance of time?

@Justin... Thanks for your insight; indeed, we too feel this shouldn't ever happen and never heard of it either, but there it is. (No, we haven't logged a TAR yet -- whatever that is -- partly because it didn't occur to us and partly because we only recently came across the issue and sensibly want to do some testing before we cry foul.)
However, the code is pretty straight-forward, much like this (inside a FOR EACH ROW trigger body):
SELECT <seqname>.NEXTVAL INTO <keyvar> FROM DUAL;
INSERT INTO <tblname> (<keyfield>, <... some other fields>)
VALUES(<keyvar>, <... some other values> );
(where <tblname> is NOT the table on which the trigger is fired). This is the only place where the sequence is ever accessed. The sequence state is way below its limits (either MAXVALUE or <keyfield>/<keyvar> datatype size).
In this setup, end users sometimes got an out-of-the-blue SQL error to the effect that uniqueness constraint has been violated -- as I said, we used to have a unique index on <keyfield> -- which leads us to assume that the sequence generated a duplicate key (only way for the constraint to be violated, AFAIK). We released the constraint and indeed, using a simple SELECT <keyfield>, COUNT(*) FROM <tblname> GROUP BY <keyfield> HAVING COUNT(*)>1 got us some results.
Unfortunately, the <tblname> table gets regularly purged by a consumer process so it's hard to trace; now we created a logger trigger, on <tblname> this time, which tracks cases of duplicate <keyfield> inserts... We'll see how it goes.
@Laurent... winks at the CYCLE thing Our sequence is (needless to say) declared as NOCYCLE and the datatype is large enough to hold MAXVALUE.

LiveCycle DS , can't get the return value of fill( arg) from Assembler class

Hi all!
I'm a have small problem , can any one help me? Please
I make a project which very similar to Product project(in
example).
1) Have Assembler class: I work correctly
package flex.samples.stock;
import java.util.List;
import java.util.Collection;
import java.util.Map;
import flex.data.DataSyncException;
import flex.data.assemblers.AbstractAssembler;
public class StockAssembler extends AbstractAssembler {
public Collection fill(List fillArgs) {
StockService service = new StockService();
System.out.print(fillArgs.size());
return service.getStocks();
public Object getItem(Map identity) {
StockService service = new StockService();
return service.getStock(((Integer)
identity.get("StockId")).intValue());
public void createItem(Object item) {
StockService service = new StockService();
service.create((Stock) item);
public void updateItem(Object newVersion, Object
prevVersion, List changes) {
StockService service = new StockService();
boolean success = service.update((Stock) newVersion);
if (!success) {
int stockId = ((Stock) newVersion).getStockId();
throw new DataSyncException(service.getStock(stockId),
changes);
public void deleteItem(Object item) {
StockService service = new StockService();
boolean success = service.delete((Stock) item);
if (!success) {
int stockId = ((Stock) item).getStockId();
throw new DataSyncException(service.getStock(stockId),
null);
some require class is ok.
2) I configure in data-management-config.xml
<destination id="stockinventory">
<adapter ref="java-dao" />
<properties>
<source>flex.samples.stock.StockAssembler</source>
<scope>application</scope>
<metadata>
<identity property="StockId"/>
</metadata>
<network>
<session-timeout>20</session-timeout>
<paging enabled="false" pageSize="10" />
<throttle-inbound policy="ERROR" max-frequency="500"/>
<throttle-outbound policy="REPLACE"
max-frequency="500"/>
</network>
</properties>
</destination>
3) My client app:
I use :
<mx:ArrayCollection id="stocks"/>
<mx:DataService id="ds" destination="stockinventory"/>
ds.fill(stocks); --> Problem here
When I run this app, The StockAssembler on the server work
correctly (i use printout to debug) . But variable stocks can't get
the return value,it is a empty list.
Please help me!

Hi,
The executeQueryAsync method is “asynchronous, which means that the code will continue to be executed without waiting for the server to
respond”.
From the error message “The collection has not been initialized”, which suggests that the object in use hadn’t been initialized after the execution of the executeQueryAsync method.
I suggest you debug the code in browser to see which line of code will throw this error, then you can reorganize the logic of the code to avoid using the uninitialized object.
A documentation from MSDN about Using the F12 Developer Tools to Debug JavaScript Errors
for your reference:
http://msdn.microsoft.com/en-us/library/ie/gg699336(v=vs.85).aspx
Best regards
Patrick Liang
TechNet Community Support

How can I limit a double value to two decimal place?

How can I limit a double value to two decimal place?
Java keeps on adding zero's to a simple double subtraction:
1497 - 179.64 = 1317.3600000000001The answer must have been simply: 1317.36

If the trouble is with output ...
If the trouble is with value accuracy ...The trouble is with OPs understanding of and/or expectations of IEEE 754 floating point numbers. o_O
[And it's probably a view (output) issue.]
how can i actually use numberformat to cut those
unwanted decimal places?Read the API - Puce already provided the link.

How can i pass function return values in to varray

Hi
create procedure name(parameters list)
here ---i am calling a function
varname := function name
returns 4 values
My doudt is how can i pass these return values in to varray..
Type varray vname[5] date type
Begin
statements
end prodedure name;
pls clarify me its urgent

This may give u a start
sql>
create or replace package test_array_pack as
type ar1 is varray(10) of number;
end;
Package created.
sql>
create or replace function test_array return test_array_pack.ar1 is
v_ar1 test_array_pack.ar1;
begin
v_ar1 := test_array_pack.ar1(1,2,3,4);
return v_ar1;
end;
Function created.
sql>
declare
v_ar2 test_array_pack.ar1;
begin
v_ar2 := test_array;
end;
PL/SQL procedure successfully completed
Message was edited by:
jeneesh

Comparing row values in two different tables

Hello,
Does anyone know if it is possible to compare (and possibly highlight - which I know can be done) row values in two different tables?
I have a ZIP Code column in table A that I want to compare to a ZIP Code column in table B and highlight those ZIP Codes that are present in table B but not in table A etc. Is this possible?
Thanks,
Kenneth

To be able to apply conditional formatting, I must edit the formulas this way.
=IF(ISBLANK(B)," ",IF(ISERROR(VLOOKUP(B,Tableau 2 :: B,1,0))," ",VLOOKUP(B,Tableau 2 :: B,1,0)))
=IF(ISBLANK(B)," ",IF(ISERROR(VLOOKUP(B,Tableau 1 :: B,1,0))," ",VLOOKUP(B,Tableau 1 :: B,1,0)))
I replaces the four empty strings by strings containing one space character.
In the field supposed to contain the text which is not contained I just entered a single space character.
Yvan KOENIG (from FRANCE vendredi 12 septembre 2008 20:52:11)

Better approach for checking column values between two different rows

My requirement is to find best Approach to find difference between column values of two different rows.Below I've mentioned two different
approaches I'm thinking of,but I'd like to know is there any other better approach.
version details
SQL> SELECT *
2 FROM V$VERSION;
BANNER
Oracle Database 11g Enterprise Edition Release 11.1.0.7.0 - 64bit Production
PL/SQL Release 11.1.0.7.0 - Production
CORE    11.1.0.7.0      Production
TNS for Solaris: Version 11.1.0.7.0 - Production
NLSRTL Version 11.1.0.7.0 - ProductionTable creation script
CREATE TABLE R_DUMMY
   (CA_ID VARCHAR2(16) NOT NULL ENABLE,
     CA_VER_NUM NUMBER(4,2) NOT NULL ENABLE,
     BRWR_SHORT_NAME VARCHAR2(25 CHAR),
     sic_code     number,
     FAC_ID VARCHAR2(10) NOT NULL ENABLE
/ insert script
insert into r_dummy (CA_ID, CA_VER_NUM, BRWR_SHORT_NAME, sic_code, FAC_ID)
values ('CA2001/11/0002', 2.00, 'Nandu',1234, 'FA000008');
insert into r_dummy (CA_ID, CA_VER_NUM, BRWR_SHORT_NAME, sic_code, FAC_ID)
values ('CA2001/11/0002', 3.00, 'SHIJU',456, 'FA000008');Desired O/P :
ca_id               fac_id          column_name          previous name          after_modification
CA2001/11/0002          FA000008     BRWR_SHORT_NAME          Nandu               SHIJU
CA2001/11/0002          FA000008     sic_code          1234               456My approach
select      ca_id,fac_id,column_name,
     decode(column_name,'BRWR_SHORT_NAME',lg_brwr,lg_sic) previous_name ,
     decode(column_name,'BRWR_SHORT_NAME',ld_brwr,ld_sic) after_modification
from
     select
               case
                    when ld_brwr != lg_brwr then
                    'BRWR_SHORT_NAME'
                    when ld_brwr != lg_brwr then
                    'sic_code'
               end
          ) column_name,ca_id,fac_id,lg_brwr,ld_brwr,ld_sic,lg_sic
     from     (
          select ca_id,fac_id,lag_brwr,ld_brwr,ld_sic,lag_sic
          from
                    Select      lead(brwr_short_name,1) over(partition by ca_id,fac_id) ld_brwr,
                         lag(brwr_short_name,1) over(partition by ca_id,fac_id) lg_brwr,
                         lead(sic_code,1) over(partition by ca_id,fac_id) ld_sic,
                         lag(sic_code,1) over(partition by ca_id,fac_id) lg_sic,
                         ca_id,fac_id
                    from r_dummy
          where (ld_brwr != lg_brwr or ld_sic != lg_sic)
)2nd Approach :
=============
select      ca_id,fac_id,column_name,
     decode(column_name,'BRWR_SHORT_NAME',lg_brwr,lg_sic) previous_name ,
     decode(column_name,'BRWR_SHORT_NAME',ld_brwr,ld_sic) after_modification
from
     select
               case
                    when ld_brwr != lg_brwr then
                    'BRWR_SHORT_NAME'
                    when ld_brwr != lg_brwr then
                    'sic_code'
               end
          ) column_name,ca_id,fac_id,lg_brwr,ld_brwr,ld_sic,lg_sic
     from     (
          select ca_id,fac_id,brwr_short_name,sic_code
          from
                    Select      ca_id,fac_id,brwr_short_name lg_brwr,sic_code lg_sic
                    from     r_dummy
                    where     ca_ver_num = '2.00'
               )o,(
                    Select      ca_id,fac_id,brwr_short_name ld_brwr,sic_code ld_sic
                    from     r_dummy
                    where     ca_ver_num = '3.00'
                        )n
          where      0.ca_id = n.ca_id
               and 0.fac_id = n.fac_id
               and (ld_brwr != lg_brwr or ld_sic != lg_sic)
)Hi Experts,
     I've provided sample data where I'm checking for just two columns viz brwr_short_name ,sic_code,but in real time
I've to check for 8 more columns so please suggest me with a better approach.
I appreciate your precious suggestions.

Hi,
Thanks for posting the CREATE TABLE and INSERT statements; that really helps!
Here's one wa. Like your 2nd approach, this uses a self-join:
WITH     got_r_num     AS
     SELECT ca_id
     ,     ROW_NUMBER () OVER ( PARTITION BY ca_id
                               ,                    fac_id
                         ORDER BY        ca_ver_num
                             )    AS r_num
     ,     brwr_short_name
     ,     TO_CHAR (sic_code)     AS sic_code
     ,     fac_id
--     ,     ...     -- Other columns (using TO_CHAR if needed)
     FROM     r_dummy
,     unpivoted_data     AS
     SELECT     *
     FROM     got_r_num
     UNPIVOT     INCLUDE NULLS
          (    txt
          FOR column_name IN ( brwr_short_name          AS 'BRWR_SHORT_NAME'
                        , sic_code               AS 'SIC_CODE'
--                        , ...     -- Other columns
SELECT       p.ca_id
,       p.fac_id
,       p.column_name
,       p.txt          AS previous_name
,       a.txt          AS after_modification
FROM       unpivoted_data   p
JOIN       unpivoted_data   a ON p.ca_id     = a.ca_id
                       AND p.fac_id     = a.fac_id
                     AND p.column_name     = a.column_name
                     AND p.r_num      = a.r_num - 1
                     AND p.txt || 'X' != a.txt || 'X'
ORDER BY a.r_num
;To include other columns, add them in the 2 places where I put the comment "Other columns".
Ca_ver_num can have any values, not just 2.00 and 3.00.
This will show cases where a value in one of the columns changed to NULL, or where NULL changed to a value.
There ought to be a way to do this without a separate sub-query like got_r_num. According to the SQL Language manual, you can put expressions in the UPIVOT ... IN list, but when I tried
...     UNPIVOT     INCLUDE NULLS
          (    txt
          FOR column_name IN ( brwr_short_name          AS 'BRWR_SHORT_NAME'
                             , TO_CHAR (sic_code)     AS 'SIC_CODE'
          )I got the error "ORA_00917: missing comma" right after TO_CHAR. Perhaps someone else can show how to eliminate one of the sub-queries.

HT4528 Can I put the same information on two different i-phones with different numbers and different ID's?

Can I put the same information on two different i-phones with different numbers and different ID's?

Yes and no it really depends on what information you are putting on the devices.

Can I have smart print eprint on two different computes with only account

Can I have smart print eprint on two different computers with only one account???

Are you talking about accessing an ePrint account from various computers? Or having HP Smart Print on multiple computers?
ePrint account information is kept at the site. You can log on it from anywhere, from any computer. Just go to the sire and click on Sign in and enter your password and email address. You can have multiple printers on one user account at ePrint Center (EPC). But printers can only be registered on ePrint Center to one user account. If you have an ePrint cable printer you can create an account at this link here.
HP Smart Print does not require an account you can download to an Internet Explorere browser (versions 6-9) and use it with no registration.
I am a former employee of HP...
How do I give Kudos?| How do I mark a post as Solved?

F4 HELP ON TWO DIFFERENT FIELDS OF A SCREEN .

Hi Experts ,
I have a screen in which i have to aply f4 help on two different fields .
1. Bussiness unit
2. SAP GL Account .
I have applied for Bussiness unit. by :
PROCESS BEFORE OUTPUT.
MODULE STATUS_1013.
PROCESS AFTER INPUT.
MODULE USER_COMMAND_1013.
PROCESS ON VALUE-REQUEST.
field B_UNIT MODULE SEARCHHELP_F4.
But how i can apply on SAP GL Account ,i have to use one more POV module or i can do it by using the same pov which i used for Bussiness unit.
Please tell me how i can do with little bit code example.
Regards,
Premraj

Hi,
use one more FIELD statement and create one more module for GL a/c in same POV event.
ex
FIELD <GL a/c fld name> MODULE <Module name>.

Dataload - Evaluate two different fields

Hi, I need to evaluate two different fields in a dataload rule and apply condition if true. for instance if field 1 is 600 and field 2 is 30 the change field 1 to 650.

Hi ,
I don't want to concatenate two fields nor display it in a single field, but I want to diplay two fields 1 below the other...
ie..If I am using write statement I would prefer,
loop at itab.
wirte: /2 itab-abcd,
/2 itab-1234.
endloop.
my output will be:
abcd
1234.
If need to use da same logic in ALV how would I use ?? hope I am little more clear now..
Please advice
Karthik.

Input in one formfield go to two different fields in a MySQL tablerow?

Hi, I hope you can help me with this.
How can I have input in one formfield go to two different fields in a MySQL tablerow without having the visitor to type out his input out twice?
With the second one I would like to use md5.
Any help is greatly appreciated.

How can I have input in one formfield go to two different fields in a
MySQL tablerow without having the visitor to type out his input out
twice?
You would need to write your query with the WHERE clause when you update to say "WHERE user=$userid". That's the most basic way. The $userid variable would need to come from either a session or a cookie if the user is logged in and you don't want them to enter the information again. Or if this is from a previous page, the $userid could just be equal to the $_POST variable after sanitization.
With the second one I would like to use md5.
That's even simpler. Before submitting the form, just do $md5_pass = md5($pass);
http://us.php.net/manual/en/function.md5.php

Assigning LOV return Value to multiple text items

Hi all
I have a custom form on which i have 10 text items
text item 1,text item 2 ....text item10
I have a table xx_querywith fields
text_item,query
i have inserted into the xx_query table
insert into xx_query(text_item,query)
values(text_item1,'select sysdate from dual');
insert into xx_query(text_item,query)
values(text_item2,'select sysdate-1 from dual');
I have created a record group dynamically and i am getting the query from the query column of the xx_query table into the record group(say test_rg)
I have created a LOV test_lov and thr set_lov_property i have populated the test_rg query into the test_LOV
is it possible for me to set the return item of the LOV dynamically so that i can get the LOV on the item which i want to ?
thanks
_

Hi All
thanks for your responses
I have Created a control item and assigned the return value of the LOV to the control item
and i have assigned the LOV to the text item that i want
Currently when i navigate to the text item the LOV is visible
but when i select a value from the LOV the value is not getting populated into the text item
I have assigned the value of the control item to the text item
but i am not sure in which trigger to write the code so as when i select the value from the LOV the value should be shown on the form populating in the text item
Thanks

Double Quotes In LOV Return Value Being Replaced With &qu ot; By APEX 4

My company recently upgraded our development and test boxes to APEX 4.0.2, which we have been wanting for a while now. We discovered that since the upgrade some of our checkboxes and radio groups no longer work as expected. What I mean by this is that the return values being checked for were not correct, and on several occasions we received PL/SQL errors related to numeric to character conversion issues.
After debugging some it turns out that we have the following LOV query for one of our Checkboxes:
select
statement d,
stmt_id || '" title="&P20_FORM_STMT. ' || statement || '.' r
from
stmts
The return value for the LOV is setup so that it would return a 508 compliant checkbox. We were told we needed a title for each value of a checkbox or radio group to be 508 compliant. These titles must also be relevant to the selection being made, hence the substitution string being used in the return value.
What I discovered in all of this is that APEX 3.2 did not convert the double quotes in our return value to &qu ot;, but APEX 4.0.2 does. This causes the value of any given checkbox or radio group to look like the following:
value="1&qu ot; title=&qu ot;This is the statement that I have made."
And what we are looking for, and what APEX used to do is this:
value="1" title="This is the statement that I have made."
Does anyone know a way to prevent APEX from converting the double quotes to &qu ot;, or is there a way to insert an element attribute for each checkbox or radio group value that contains a substitution string?
Thanks in advance!
Pastey

ryansun wrote:
4.2.1
Hi,
I have a classic report, which has a count column that is hyperlinked. using the standard apex column hyperlink option. In that we have the option of passing values. I noticed that when I am passing a value which has "/" in it, it replaces the / with & #x2F;
I have created a application item which I am populating with the report column.
Because of which I cannot use that value in the report query.
Any suggestions?Yes. Don't pass string values in URLs. Especially where it is possible for these strings to contain URI reserved or APEX sensitive characters. This might work for a while but your application can be broken months from now by users including a "&" or ":" in data that gets passed as a URL parameter. Whilst it is possible to escape strings to make them URL- and APEX parameter-safe, it is much better practice to avoid the problem altogether.
Exposing data in the URL may also introduce security vulnerabilities. Also note that the maximum length of a URL in Microsoft Internet Explorer is about 2KB, which can easily be exceeded by throwing a few string values at it.
Only use discrete alphanumeric key values as URL parameters. In target pages/regions, use these key values to retrieve the required data using item source attributes and processes.

LOV return value to submit multi LOV/Text field order by value!

I have nested LOV and return value reflected to another LOV/Text field by order wise.
My problem,
The return value LOV or Text field should be dispay with one by one values order by (Dynamic).here i using the query in each LOV source.
select DMS_DD_ENG_DESC dis, DMS_DD_ID ret from DMS_DEPT_DETAILS
where DMS_DD_DT_REF_ID=:P3_DETAILS
Workspace :RAM_R&D
User Name/Password :aramani/apex
App http://apex.oracle.com/pls/apex/f?p=36167:3I should do the dynamic action for this case?
anyone can help me plz.
Thanx,
Ram

Hi Ram,
I changed your application and i think it is working the way you want.
I don't know if it exactly what you need but take a look and let me know.
Regards,
Kees Vlek
<tt>Company: http://www.orcado.nl
Blog: http://www.orcado.nl/blog/blogger/listings/69-kvlek
Twitter: http://www.twitter.com/skier66</tt>
If the question is answered please change it to answered and mark the appropriate post as correct/helpfull.

Can a single LOV return values to two different fields?

Similar Messages

Maybe you are looking for