Can a Web Service be Connected to XI for Capturing Error Messages?

Hello,
Several years we developed a Web Service from Sap to Sharepoint. The issue is that we often get an "Error at Target of Invocation" intermittently. The first thing we do of course is to make sure the SAP connection password has not expired. Also, whenever mapping is changed we use the Web Service to create a new WSDL file that is compatible. Importantly, we assume that the connection from a Sharepoint is being made, because to run one of the processes from Sharepoint, while connecting to SAP, there is no problem. However, when we run a different process that uses the same Sharepoint to SAP connection, we get the error at target of invocation message.
The .NET developer will sometimes recycle the Sharepoint process that clears the cache, and for now, we think, that may be the issue. Still we are not positive, and this message does not reveal the real issue. Is there a way to connect the Web Service to XI to capture any issues in between the two systems that would uncover what the real issue is?
Thanks, Tom M.

Hi Tom,
AFAIK We can raise alerts in PI system , if any messages fail for the interface (PI to .Net Webservice). But if any connection issue occurred , Receiver server will be having more information/log traces why exactly connection occurred. I will recommend to get the trace from receiver system (Server on which Webservice was hosted) and analyze the trace and find the root cause.
Thanks
Hari.

Similar Messages

HP Web Services Setup - Connection error. Check Internet connection.

I am trying to enable HP Web Services but Connection error. Check Internet connection. .
I use static ip with Preferred DNS Address: 8.8.8.8 and 8.8.4.4 and it does not work.
I changed to DHCP also it does not work.
I have a ZTE home modem router connected to the printer.
This question was solved.
View Solution.

Hi MaBek,
Can you check if your printers IP address is valid.
If you have a laptop or PC connected to the same network, open a browser and type the IP address in the address bar and hit enter.
This should open a Embedded web Server page if the IP address is valid.
Here you can navigate to Web Services tab and click on enable to enable web services.
Regards,
Oliver
"Although I work for HP, I'm speaking for myself and not on behalf of HP"--Please mark the post that solves your problem as "Accepted Solution"
"Say "Thanks" by clicking the Kudos Star in the post that helped you.

Can a Web Service be Consumed from within JSX

Hi all,
In CS5, can a web service be consumed from within JSX, and if so - how?
TIA,
mlavie

Kris,
Thanks! Exactly what I needed!
mlavie

Exchange Web Services are not currently available for this request because none of the Client Access Servers in the destination site could process the request.

Hi,
I am using EWS Java APIs and passing OAuth tokens to fetch data from office 365 mailboxes.
Because I am developing Web APIs I preferred using "Application Permissions" defined in Azure active directory application for Office 365, and used "client credential flow" OAuth flow to fetch OAuth token specific to application which will
allow "Have full access via EWS to all mailboxes in the organisation".
After fetching token with the procedure specified in the document "http://blogs.msdn.com/b/exchangedev/archive/2015/01/21/building-demon-or-service-apps-with-office-365-mail-calendar-and-contacts-apis-oauth2-client-credential-flow.aspx"
I passed this token to EWS Java APIs,
it gave me error saying:
microsoft.exchange.webservices.data.ServiceResponseException: Exchange Web Services are not currently available for this request because none of the Client Access Servers in the destination site could process the request.
I tried similar thing with EWS managed APIs for .net. Got similar error.
Can anyone provide some help and direction to resolve this error.
Thanks & Best Regards,
Pranjal

I see you found an answer with the X-AnchorMailbox header on StackOverflow:
http://stackoverflow.com/questions/29554724/exchange-web-services-are-not-currently-available-for-this-request-because-none

Testing web service results in no response, but HTTP Error 500

Hi All,
I've already solved my problem, but I wanted to share my results. It took two days of pain, so you could imagine how wonderful I felt when it was solved. :)
Problem: I am exposing PL/SQL procedures as web services, using JDeveloper 10.1.3. I noticed that when I expose procedures that return complex types (like records), it caused all of the web service calls to die silently. I couldn't see any other errors except Apache's HTTP 500 error. But when I ran the web service locally using JDeveloper's OC4J engine, I didn't receive any errors. Everything worked. I looked at the opmn/logs/* dir, and still no signs of the real error. So I set out to learn where I could view more logs, and I eventually found the error inside $ORACLE_HOME/j2ee/MyConatiner/log/MyContainer*/oc4j/log.xml, after I increased the verbosity.
Solution: I found the "NoClassFound" error after I fiddled with j2ee-logging.xml. The funny part is, the error did not show up in the ERROR or INTERNAL_ERROR module types. Some of the wrapper Java classes that were generated to deal with complex types (records) and even arrays, were not being included in the EAR/WAR file for deployment! That's why when I ran the web service locally using JDeveloper, there were no errors (since the classes were present). Now, before I deploy I always check what is being deployed... :)
Here's what I learned through the process. Hope it's helpful!
keywords: http 500 error empty test response reply web service deploy complex data types arrays logs pl/sql procedures functions
Debugging
There are several places where logging occurs on Oracle Application Server 10.1.3.
This is not a complete list, but it covers the main areas. Let's assume our OC4J
container is called MyContainer:
OPMN
    * tail -f $ORACLE_HOME/opmn/logs/*MyContainer*
    * To adjust the verbosity, use the Enterprise Manager web interface: click on
      the container, then on the Administration -> Logger Configuration. Now you can
      set the logging level for different components.
Apache
    * tail -f $ORACLE_HOME/Apache/Apache/logs/*log
    * The file names depend on the ErrorLog? and CustomLog? directives in
       httpd.conf. You can adjust the verbosity by changing the LogLevel
       Apache directive.
J2EE
    * tail -f $ORACLE_HOME/j2ee/MyContainer/log/MyContainer*/oc4j/log.xml
    * You can adjust the verbosity by editing
       $ORACLE_HOME/j2ee/MyContainer/config/j2ee-logging.xml. Look for the
       <logger> element, and set its 'level' attribute to 'TRACE:32' for the most
       information.
    * From experience, these logs are the best. :-)
Oracle
    * tail -f $ORACLE_HOME/Apache/Apache/logs/oracle/log.xml
    * To enable and configure this logging system, add the following to your httpd.conf:
      OraLogMode oracle
      OraLogSeverity TRACE:32
      OraLogDir ORACLE_HOME/Apache/Apache/logs/oracle
    * More info: http://download-east.oracle.com/docs/cd/B25221_04/web.1013/b25211/servlog.htm

Thanks for sharing your tips on this forum, as it will be useful for other users, that run into this issue.
Feedback like this will also help us improve error reporting in the next release, as missing class files in the packaged application is a common issue when developers are moving from the embeded oc4j instance packaged with JDewveloper to standalone instances.
-Eric

When i connect my iphone 4,an error message saying usb device is malfunctioning is appearing...can anyone give me a solution for this?

when i connect my iphone 4,an error message saying usb device is malfunctioning is appearing...can anyone give me a solution for this?i tried using on a different pc.but still get the same result..

First thing i would try is to use another cable if available.

HT5654 I often travel abroad and my host has changed Internet provider. Then my service was interrupted and I can't update iTunes. Any tips to stop the error messages?

I often travel abroad and my host has changed Internet provider. Then my service was interrupted and I can't update iTunes. Any tips to stop the error messages?

Wow! At least on Apple TV, problem solved. Apple: what's not to love? Please give me credit if you use it in marketing campaigns... ;-)

Sync Web Service - BPM with 2 sync proxy calls error.

Hi.
Have a sync web service going into a BPM.
In the BPM there ar 2 sync calls towards a system making a credit check.
The answer is responded to the web service.
In our QA system the solution works perfect.
I transported the solution to production and when I test the web service call towards I get the following error.
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error SOAP:mustUnderstand="1" xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="INTERNAL">PL_TIMEOUT</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:Stack>Timeout condition of pipeline reached</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Does anybody have an idea why I get the error.
When I check my config everything looks the same.
Looks like we never send the first sync call to the proxy when I check in SXMB_MONI and the BPM gets terminated.
We have just migrated the solution from XI 3.0 to PI 7.11.
BR
Kalle

Hi.
How will that help if we do not send the message.
When I check the graphics in SXMB_MONI the error occours befor we send the first message with proxy.
Also extend ASYNC timeout?
We are using sync communication.
BR
Kalle

I have new IPad ...can't watch rented downloaded movie on my tv..error message is " The connected display is not authorized to play protected movies"... What is up with that???

I have new IPad ...can't watch rented downloaded movie on my tv..error message is " The connected display is not authorized to play protected movies"... What is up with that???

I had exact same problem and I have found a way to get round out!!!! Easy!
So the reason it doesn't allow it to play is for security to stop piracy etc.
Plug in the cable and VGA and aux cable and get everything set up so you are looking at the home screen.
1) select Videos
2) selected the film you want to watch
3) click the little play button
4) it will then come up with the message saying it can't play protected films blah blah blah
5) WITHOUT clicking ok double tap the home button to bring up the multitasking bar and swipe left to reveal the control panel
6) hold fast forward for a second or two and the movie with continue to play!
Stay in the multi tasking bar with the control panel, The message will stay there but don't worry. Kick back and enjoy your iPad movie on the big screen:)
I'm sure your saying thanks:) it was my pleasure realising I've outsmarted apples little security protection thing lol

What web service & xml will be used for deleting the packged epub/pdf file from Admin Console

What web service & xml will be used for deleting the packged epub/pdf file from Admin Console?
I am able to delete the files from Admin console directy but not able to get which web service is calling on deleting the file from admin console:
Mangal

Hi Jim,
I tired following web service and xml to delete the packaged ebook but it is giving me error instead of response:
Web Service & XML
http://myserver_url/admin/ManageResourceKey
<request action="delete" auth="builtin" xmlns="http://ns.adobe.com/adept">
<nonce>" . $nonce . "</nonce>
<expiration>'. $expiration .'</expiration>
<resourceKey>
<resource>resource_id</resource>
<resourceItem>1</resourceItem>
</resourceKey>
</request>
Error Message
<error xmlns="http://ns.adobe.com/adept"
data="E_ADEPT_DATABASE http://myserver_url/admin/ManageResourceKey
Cannot%20delete%20or%20update%20a%20parent%20row:%20a%20foreign%20key%20constraint%20fails %20(`adept`.`distributionrights`,%20CONSTRAINT%20`distributionrights_ibfk_2`%20FOREIGN%20K EY%20(`resourceid`)%20REFERENCES%20`resourcekey`%20(`resourceid`))"/>
Magal Varshney

How can I capture error message when I invoke BO or BS in Service Script

I want to check for particular error message number in the service script after I invoke BO.

Not sure what is your objective to do that, but I doubt you have any control over that, alternatively you can look at BO Lifecycle if it may meet your requirements.

Can't download music from PC to IPhone 5. Error message says "Cannot copy item. The device has either stopped responding or has been disconected. Help?

Can't download music from PC to IPhone 5. Error message says "Cannot copy item. The device has either stopped responding or has been disconected. But the phone is connected. Help!!

Hello iyurdin,
We've an article that can help keep your iPhone connected in Windows' eyes.
iOS: Troubleshooting USB connection
http://support.apple.com/kb/TS1286
Cheers,
Allen

"iTunes could not connect to the Music Store" Error Message

Hello all,
I finally got my script running correctly and I can see the front page of my iTunesU site(Yay!). But I am getting an irritating error message, and what is unusual are the circumstances under which I see the error message and the circumstances under which I do NOT see the error message. Allow me to elaborate.
Scenario #1
I have iTunes open on my computer. I go to the login page I created on my school's website and login. I watch as the "Music Store" page on iTunes gives way to the front page of my iTunesU site. Perfection! This is the behavior I want!
Scenario #2
I DO NOT have iTunes open on my computer. I go to the login page I created on my school's website and login. I watch as iTunes begins to open and then spits out this error message:
"iTunes could not connect to the Music Store. An unknown error occurred. Make sure your network connection is active and try again."
There is also an error number attached to the error message but it changes from time to time with no explanation. Here is the strange part. If I just hit "OK" on the error message my iTunesU site opens fine.
I've tried this on my home and work computers and a friend's computer and the behavior is the same. Moreover I surfed over to the Stanford iTunesU login page: http://itunes.stanford.edu/ and I get the same behavior(which pretty much rules out in my mind that it is a problem with my script).
I guess it isn't a huge deal. Worse comes to worse we can tell the students and faculty, if you see an error message from iTunes just hit "OK". But I'm rolling out this slick new iTunesU site and this error message is like a scratch in the paint job. Plus my boss is looking over my shoulder like "what's that error?" and it is starting to detract from the computer whiz kid image I've worked so hard to cultivate
My possible suspects are:
iTunes - (Went over to the iTunes discussion board and a lot of people report similar error messages when trying to get into the Music Store but I couldn't find anyone who said hitting "OK" made it possible to proceed)
My script -(seems unlikely since Stanford has the same problem)
The configuration on the computers I've tested it on - (But I've tested it on three different computers!)
iTunesU - If this is the problem I'm hoping you people can help me.
So has anyone else experienced this?
Try to login into your iTunesU page with and without iTunes already open. See any error messages or weird behavior?
Try the same thing on Stanford's site: http://itunes.stanford.edu/
If you can repeat my result then post it here so Apple will know this is an issue. If you can't repeat my result then post it here so that I might know I need to look elsewhere for the problem.
Thank you for your kind attention.

I'm seeing this error on some, but not all, of my Windows XP machines. On my personal development XP box, I see this error if iTunes is closed when I try and access iTunes U via my transfer script or Stanford's.
"iTunes could not connect to the Music Store. The network connection was terminated unexpectedly. Make sure your network connection is active and try again."
The errors occured in IE 7 Beta, Firefox 1.5.x, and Firefox 2 Beta. In each case, iTunes U loaded after I clicked the 'ok' button in iTunes. I did notice that in Firefox's case an additional pop-up window appeared that asked whether or not I had iTunes; when I selected that I do have itunes, it transfered me to iTunes but generated the error.
After getting these errors on my Windows XP machine, I tried it on two different lab machines running Windows XP, and didn't get the error message once -- I tried it in IE 6, Firefox 1.0.x and Firefox 1.5.x and they all worked. It even worked with IE 7 Beta and Vista Beta.
Based on this, I think the problem must lie in how Windows registered iTunes, and the handshake just isn't happening properly.
Ken Newquist
Lafayette College

TS1717 Having trouble running iTunes version 11.0.2 on a Dell Laptop running Windows 7 Professional Service Pack 1. Keep getting an error message "the software required for communicating with iPods and mobile phones was not installed correctly..." reinst

Having trouble when I launch iTunes (version 11.0.2) on my Dell Laptop running Windows 7 Professional (service pack 1). I get an error message indicating software required to communicate with iPod and mobile phones was not installed correctly. Do you want iTunes to try to repair this for you? I normally respond with OK and it immediately tells me "could not be repaired. Please reinstall iTunes..." I have done this a number of times to no avail.

I also notice Quicktime is not getting installed at all.
That one is normal nowadays (ever since the iTunes versions 10.5.x).
The software required for communicating with iPods and mobile phones was not installed correctly. Do you want iTunes to try to repair this for you?
Let's try a standalone Apple Mobile Device Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of why it's not installing under normal conditions.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/
Right-click the iTunesSetup.exe (or iTunes64setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleMobileDeviceSupport.msi (or AppleMobileDeviceSupport64.msi) to do a standalone AMDS install.
(If it offers you the choice to remove or repair, choose "Remove", and if the uninstall goes through successfully, see if you can reinstall by doubleclicking the AppleMobileDeviceSupport.msi again.)
Does it install (or uninstall and then reinstall) properly for you?
If instead you get an error message during the install (or uninstall), let us know what it says. (Precise text, please.)

AFP fails to connect to a PC volume and gives a "version of the server you are trying to connect to is not supported" error message.

AFP fails to connect to a PC volume and gives a "version of the server you are trying to connect to is not supported" error message.
Has anybody come across this error and found a fool-proof solution? I have found some stuff on the web but nothing seems to work. In particular this one on the Apple Help doesn't:
http://support.apple.com/kb/HT4700
I have a W2K3 server where the volume is. It's a new Mac with OSX 10.8 and is connecting with AFP (I don’t want to move to SMB yet). There are older Macs with lower OS and all of them work fine. I have checked all the basic stuff and it is set-up correctly (hosts file on Mac, network, etc.).
Any help greatly appreciated,
Cheers,
Ian

This may work for you:
http://www.zdnet.com/mavericks-smb2-problem-and-fixes-7000022519/

Can a Web Service be Connected to XI for Capturing Error Messages?

Similar Messages

Maybe you are looking for