Can actionscript handle special characters/han or chinese characters?

Hi,
I am having issue with my created flash, it can't handle chinese characters? is there some way i can handle this thru code? or should there be any font or language pack installed?
thank so much for the help.

Hi,
I already embedded the fonts. And I changed the encoding of my xml to GB2312.
And placed a chinese characters on the node. It didnot rendered any chinese characters. instead, the movie is not rendered properly.
Thanks.

Similar Messages

Time-dependent Vendor Master & Handling Special Characters

Hi,
I need to extract time-dependent Vendor Master.
1. The data source for 0VENDOR does not have fields to hold the valid date range.
2. Does the Master data in R/3 for Vendors will hold the valid date range?
3. The text for 0VENDOR provides time-dependent, but how to map the valid from and valid to fields?
Handling Special Characters:
We are trying to extract data from Legacy system via DB Connect. The item text field consists of special characters. Of course in BW customization we can specify all the special characters to consider. But the special character we observed is 'square' symbol i.e. 'new line character' in Oracle. We are updating this to an ODS object. When looked at error log, observed that green light for the number of records transferred and updated, but finally when it load into ODS object and activates popping up the error message saying 'could not recognize special character'.
Please help me getting the 2 issues resolved.
Thanks in advance.
Regards,
Sudhakar.

Hi Everyone,
Thanks for inputs on Special characters issue...
Finally resolved with below piece of code in the start routine:
DATA: FLAG,
 OFF TYPE I,
 LEN TYPE I VALUE 1,
 ALLOWED_CHAR(95) VALUE
'0123456789ABCDEFGHIJKLMNOPQRSTUVWXYZ`~!@#$%^&*()-_=+ ' &
'abcdefghijklmnopqrstuvwxyz:;<>,.?/|\{}[]"'''.
CONSTANTS: C_CHAR VALUE '-'.
LOOP AT DATA_PACKAGE WHERE NOT /BIC/ZI_DESC IS INITIAL .
 DO.
 IF DATA_PACKAGE-/BIC/ZI_DESC CN ALLOWED_CHAR.
 REPLACE SECTION OFFSET SY-FDPOS LENGTH LEN OF
 DATA_PACKAGE-/BIC/ZI_DESC WITH C_CHAR.
 FLAG = SPACE.
 ELSE.
 FLAG = 'X'.
 ENDIF.
 IF FLAG = 'X'.
 EXIT.
 ENDIF.
 ENDDO.
 MODIFY DATA_PACKAGE.
ENDLOOP.
if abort is not equal zero, the update process will be canceled
ABORT = 0.
I have seen the link sent by 'Eugene Khusainov' today. Thought putting my piece of code that may help others...
Regards,
Sudhakar.

How can I display special characters of NonEuropean languages (French, Italian, Spanish, German and Portuguese.) using import string mechanism

I would like to translate the User Interface of my application to French, Italian, Spanish, German and Portuguese.
When I put special characters in the import string file they showed up as ? (question mark)
The import strings file includes the following parameters for each string: font, text, size and style. (but no field for script)
In order to use a unicode font such as Arial I need to select a french script. But this option is not supported bu LabView (As far as I saw)
A) Is there a font which is directly German/ French etc and not regula font + script parameter?
B) Are there another required step
s for special characters support? (When I put speciual characters in the import string file the showed up as ? question mark)

This was discussed last week in this group- read the previous messages.
Look for the thread "Foreign Languages in Labview"
And recite the mantra
ActiveX is good
ActiveX is holy
All Hail Bill
Those who claim otherwise are heretics and not to be trusted
Actually, in this case the non-ActiveX suggestions may be good.
talia wrote in message
news:[email protected]..
> How can I display special characters of NonEuropean languages (French,
> Italian, Spanish, German and Portuguese.) using import string
> mechanism

How can I distinguish special characters or signs in Doc through VBA?

How can I distinguish special characters or signs in Doc through VBA?
I have a few large documents written in word 2003 format and now I work on them under word 2007.
Such large documents containing lots of special characters. I want to change them into Microsoft 3.0 equation form（It is required by the team). I find no way but using function AddOLEObject and Sendkeys through VBA. Common characters can be added
to equation by function Sendkeys, but the return value of Asc() or AscW() for "double arrow", "in" , " not greater than " such special characters or signs, to name but a few are the same ,i.e., 40 And I cannot distinguish them.
I found the link http://msdn.itags.org/word/44333/ may be of use to me, and the title is:
How to read symbols from a DOC documents! (Microsoft Word)
the original question is
Using function "InsertSymbol", I can insert a symbol into a document. But
how can I read a symbol from a document?
Using "Characters(i).range.text", I can read a char. But when meeting a
symbol, the value of "Characters(i).range.text" is always '('.How can I get the CharacterNumber of the symbol.
And the final answer is :
Hi chenfeng,
Word protects symbols from symbol fonts if you insert them from the "Insert
> Symbol" dialog.
This is done so they aren't changed when you change the font or style. But
it also results in Word reporting AscW( ) = 40 on all of them.
I've posted a macro to "unprotect" them (or to protect them again if you
want) ... just today again in
Newsgroups: microsoft.public.word.vba.customization
Subject: Symbol Characters
Date: Mon, 3 May 2004 11:00:46 -0700
Message-ID: <09f401c43138$8f92f900$[email protected]>
It isn't archived on Google yet, but tomorrow you should be able to simply
copy the message ID into http://www.google.com/advanced_group_search.
Regards,
Klaus
But the link for the macro in the final answer is missing.
Can anyone with kindness help me? Thaks a lot.

Following Cindy Meister's Advice ,I use MathType SDK.
The sample in MathType SDK in the following may be meaningful,but I do not know how the MTEF for cos^^2Theta, MTEF for sin^^2Theta and MTEF for 1 are generated .
It looks much complicated,and I searched the docs in MathType SDK to get a explanation.Is there any function to generate them? I want to use this method to change commaon text mathematical signs( in special character table) and Greek letters and characters
with subscripts and superscripts to Microsoft 3.0 equation form.
Can anyone with kindness help me?
Sub MTEFTextSubstitution()
 Dim MTEFStr1$, MTEFStr2$, MTEFStr3$
 Dim stat
 'MTEF for cos^^2Theta
 MTEFStr1$ = "% MathType!MTEF!2!1!+-" + _
 " % feaaeaart1ev0aaatCvAUfeBSjuyZL2yd9gzLbvyNv2CaerbuLwBLn" + _
 " % hiov2DGi1BTfMBaeXatLxBI9gBaerbd9wDYLwzYbItLDharqqtubsr" + _
 " % 4rNCHbGeaGqiVu0Je9sqqrpepC0xbbL8F4rqqrFfpeea0xe9Lq-Jc9" + _
 " % vqaqpepm0xbba9pwe9Q8fs0-yqaqpepae9pg0FirpepeKkFr0xfr-x" + _
 " % fr-xb9adbaqaaeGaciGaaiaabeqaamaabaabaaGcbaGaci4yaiaac+" + _
 " % gacaGGZbWaaWbaaSqabeaacaaIYaaaaOGaeqiUdehaaa!3B65!"
 'MTEF for sin^^2Theta
 MTEFStr2$ = "% MathType!MTEF!2!1!+-" + _
 " % feaaeaart1ev0aaatCvAUfeBSjuyZL2yd9gzLbvyNv2CaerbuLwBLn" + _
 " % hiov2DGi1BTfMBaeXatLxBI9gBaerbd9wDYLwzYbItLDharqqtubsr" + _
 " % 4rNCHbGeaGqiVu0Je9sqqrpepC0xbbL8F4rqqrFfpeea0xe9Lq-Jc9" + _
 " % vqaqpepm0xbba9pwe9Q8fs0-yqaqpepae9pg0FirpepeKkFr0xfr-x" + _
 " % fr-xb9adbaqaaeGaciGaaiaabeqaamaabaabaaGcbaGaci4CaiaacM" + _
 " % gacaGGUbWaaWbaaSqabeaacaaIYaaaaOGaeqiUdehaaa!3B6A!"
 'MTEF for 1
 MTEFStr3$ = "% MathType!MTEF!2!1!+-" + _
 " % feaaeaart1ev0aaatCvAUfeBSjuyZL2yd9gzLbvyNv2CaerbuLwBLn" + _
 " % hiov2DGi1BTfMBaeXatLxBI9gBaerbd9wDYLwzYbItLDharqqtubsr" + _
 " % 4rNCHbGeaGqiVu0Je9sqqrpepC0xbbL8F4rqqrFfpeea0xe9Lq-Jc9" + _
 " % vqaqpepm0xbba9pwe9Q8fs0-yqaqpepae9pg0FirpepeKkFr0xfr-x" + _
 " % fr-xb9adbaqaaeGaciGaaiaabeqaamaabaabaaGcbaGaaGymaaaa!36A4!"
 Selection.Copy
 'Init API, reset transform
' If MTUtil.CheckMTDLLVersion = 0 Then Exit Sub
 If Not IsDLLVersionOK() Then Exit Sub
 MTXFormReset
 'first substitution
 stat = MTXFormAddVarSub( _
 mtxfmSUBST_ONE, _
 mtxfmVAR_SUB_PLAIN_TEXT, "<v1>", 0, _
 mtxfmVAR_SUB_MTEF_TEXT, MTEFStr1$, Len(MTEFStr1$), 0)
 If stat <> 0 Then
 MsgBox "1st MTXFormAddVarSub returned: " + Str(stat)
 Exit Sub
 End If
 'second substitution
 stat = MTXFormAddVarSub( _
 mtxfmSUBST_ONE, _
 mtxfmVAR_SUB_PLAIN_TEXT, "<v2>", 0, _
 mtxfmVAR_SUB_MTEF_TEXT, MTEFStr2$, Len(MTEFStr2$), 0)
 If stat <> 0 Then
 MsgBox "2nd MTXFormAddVarSub returned: " + Str(stat)
 Exit Sub
 End If
 'third substitution
 stat = MTXFormAddVarSub( _
 mtxfmSUBST_ONE, _
 mtxfmVAR_SUB_PLAIN_TEXT, "<v3>", 0, _
 mtxfmVAR_SUB_MTEF_TEXT, MTEFStr3$, Len(MTEFStr3$), 0)
 If stat <> 0 Then
 MsgBox "3rd MTXFormAddVarSub returned: " + Str(stat)
 Exit Sub
 End If
 'do the substitution
 stat = TransformGraphicEquation
 If stat <> 0 Then
 MsgBox "TransformGraphicEquation returned: " + Str(stat)
 Exit Sub
 End If
 MTTermAPI
 'Paste new equation
 Selection.Collapse Direction:=wdCollapseEnd
 Selection.PasteSpecial Placement:=wdInLine
End Sub

Handling special characters in XML

Hi,
I am using Oracle 10g 'XMLType' datatype to store XML files. Before storing I parse the XML document using Java Xerces Parser. If it parses successfuly, then I perform some business rule execution based on XML file which was parsed. So till this stage there is no problems. But when XML file contains some special characters like copy-paste of some description from MS-Word document into XML tags, then Xerces parser will parse such characters with out any exceptions, but while inserting XML document, Oracle database just throws exception saying unable to handle special characters.. So how to avoid such exceptions or silent such exceptions with any specific settings respect to XMLType datatype in 10g DB.
Please advice!
Arvind Patil - IN

Monica--
In XI 2.0, we've noticed a number of issues processing special characters, primarily caused by the version of JCO that we're running. It sounds like SAP has spent some time in the past few months focusing on these errors, so make sure you're on the most recent patchlevels of all your middleware components, including any of the middleware libraries that BC uses. In XI, we had to update the 3 files that make up the RFC library and JCO library. SDM couldn't update the libraries for us -- we had to manually move the files to the right place.
Escaped XML characters like "&" """ """ were fixed as of JCO 2.0.10 (the current patchlevel on AIX/UNIX), the special character "'" is fixed in the next release, JCO 2.0.11, due out in a few weeks (hotfixes are available). I don't know the equivalent versions on other platforms. By default, XI 2.0 appears to have shipped with JCO 2.0.5. I would expect many XI 3.0 users to also be affected.
This may or may not apply to BC, because I don't know what BC uses to talk to SAP under the covers.
--Dan King
Capgemini

Can't open "special characters" in any Edit menu; have a constantly flashing empty window labelled 'characters' that i can't stop. window flashes then disappears every time i click on anything. any suggestions? tru thanx !

i can't open "special characters" in any Edit pull down menu. i have a constantly flashing empty window labelled 'characters' that i haven't been able to stop.
it appears every time i click on anything. any suggestions? tru thanx

I, too, have found Bridge very unstable. I find this to be extremely disappointing, seeing as it's literally the most expensive piece of software I've ever purchased for personal use. I've seen these two symptoms:
1. When running in full screen mode, Bridge crashes periodically. This happened on Vista, so I blamed Vista (of course), but even after regressing to XP SP2, I see the same symptoms.
2. Although I didn't see this on Vista, running on XP I see the problem described earlier in this thread, where clicking on a thumbnail displays the wrong image preview. When this happens the image displayed is one from a different folder! I solve the problem by clearing the cache, and it's OK for a while, but the problem keeps returning.
3. Even when exiting cleanly from Bridge (using File->Exit), Bridge often forgets where I was working in my previous session. I need to re-navigate from the very top level directory down through the hierarchy to my photo directory.
Again, it's very disappointing to invest so much in a single software package only to see such basic operations malfunction.

Handle special characters in SQLPLUSW window.

Dear SQL Gurus,
In my organisation every day we receive some data changes from developers and we need to do those changes in all databases. I developed a shell script to automate this procedure. but the problem I am facing problem with special characters like TM(trade mark), (R) - reserved character.
To store these values in the database our team members are using TOAD for insert operations. If I execute the same statemenst from SQL prompt I am not able to store the special characters in database.
we are using 10.2.0.4 version on sun solaris10. Please help me in this.
Thanks,
KPS

Dear Saubhik,
please let me know the procedure to insert the special character from SQL prompt. You explained about how to retrive from database using select statement. It is really good. our developers give the insert statements in word documents. so that they can place the special characters.
Thanks,
KPS

To Handle Special Characters(Guideu0099 ) in MATMAS IDOC fields

Need to handle special characters like Guide, as an attached superscript in MATMAS02/05 IDOC field . The field name is TDLINE in E1MTXLM segment.
As a trial run when these special characters are pasted in the TDLINE field, it throws an error that "the input field contains prohibited characters"
Please let me know if there is any workaround for this.

hi
good
go through these links, i hope these ll help you to solve your problem.
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/CAGTFADMLO/CAGTFADMLO.pdf
http://www.erphome.net/wdb/upload/forum14_f_2908.doc
thanks
mrutyun^

Handle special characters in the attribute name

Hi,
I am generating different view element in WD application dynamically. How to handle special characters other than '-/ABCDEFGHIJKLMNOPQRSTUVWXYZ_0123456789' for the attribute name dynamically?
Thank you, in advance.
Trupti

Going with the obvious response - don't use them?
if you're using dynamic code, there is no reason (other than debug support) to give your created elements any meaningful name.
Just generate a GUID for each new element and use that.
If you need to be able to later search for and update the element a simple lookup table of GUID to reference string should work reasonably well.
Cheers,
Chris

How to handle special characters in NWDI

Dear All
I am trying to update the Description from JSP form. Through JCO we are calling the RFC of ABAP. We are passing these description from Java to RFC of ABAP and this RFC update the text in Database.
We have noticed that if there is some special character in description like as : or , complete description is not getting updated in to the SAP database.
Can anyone help me how to handle these special characters in Java. There may be N number of special characters. We want to generalize it. We want to replace these characters by s and z respectively.
For example : We want to update this description.
APPLERR H'4301 H'FA03 H'254C na Zagreb TC4 rijeen je cleaning procedurom, te je i kroz CSR odgovoreno da trap korekcija N01TCADG-0052 u bloku UPDC vie nije potrebna, te se moe izbaciti (AP143).
Uspjeno su zavrene HR17/CN-A3 FOA-e na tranzitnom nivou, te slijedi roll-out u dva termina 12/13.04 i 19/20.04. ETK je na sastanku isporučio SW, te ALEX i mini PLEX za sve objekte.
AP147. Poslati finalnu dokumentaciju za uvođenje paketa (implementacijsku instrukciju i sve popratne datoteke).
WHile updated text is as follows :
APPLERR H'4301 H'FA03 H'254C na Zagreb TC4 rije
N01TCADG-0052 u bloku UPDC vi
Uspje
sastanku isporu
AP147. Poslati finalnu dokumentaciju za uvo
Regards
Bhavishya

Hi Bhavishya,
Apparently your SAP database isn't configured to support Unicode. That would be the first solution to your problem, but I can imagine it's a bit drastic to convert your DB.
A second solution would be to encode the input description to ASCII before storing it in the database. When reading from the database, decode again to Unicode. This way, no information is lost. A suitable encoding would be Base64. e.g.
String description = "unday ebra";
String descriptionBase64 = new sun.misc.BASE64Encoder().encode(
description.getBytes("UTF-8")); // ""
// store descriptionBase64 in the DB
// later, when reading descriptionBase64 from the DB
String description2 = new String(
new sun.misc.BASE64Decoder().decodeBuffer(descriptionBase64), "UTF-8");
Instead of using Sun's implementation, a better alternative is to use the open source implementation
org.apache.commons.codec.binary.Base64 from Commons Codec .
The 3rd approach is indeed to normalize the description by replacing all special characters with their ASCII equivalent. A rather easy solution is as follows:
String description = "unday ebra";
String descriptionNormalized = sun.text.Normalizer.normalize(
description, sun.text.Normalizer.DECOMP, 0).replaceAll(
"[^p{ASCII}]", "");
sun.text.Normalizer decomposes the string, e.g. "éàî" becomes "e´a`i^", after which non-ASCII characters are being removed using a regular expression.Again, note that it's usually a bad idea to use sun.* packages, see note about sun.* packages. The above code only works with J2SE 1.4 and J2SE 5.0, but it breaks in J2SE 6.0 (where
java.text.Normalizer became part of the public API ;-). A good open source implementation can be found here: ICU4J (com.ibm.icu.text.Normalizer).
Kind regards,
/Sigiswald

Error while handling special characters ( and &) in Sender File adapter

Dear All,
Scenario: Third Party System --> (File adapter) SAP PI 7.1 (SP05) --> (Proxy) ECC
We are receiving CSV file and no mapping is required in PI as all the processing is being done by third party tool. But we are receiving special characters like ',",>,< and & in the csv file.
When we are using File Type as TEXT and File Encoding as ISO-8859-1 than we are getting error. We changed File Type to BINARY and than we are able to handle ',",> but having issue in handling < and &.
Any idea how we can handle it.
Please note trhere is no Mapping in SAP PI so cannot uise Java mapping.
Thanks a lot
Chanakya

Hey,
You can add ABAP Script in Receiver Proxy for eliminating or replacing with NULL or empty. Since you dont have mapping for formatting these kind of junks you can follow the above approach.
Else, you can remove the junks at OS level while running a small script and make it available to PI.
Or else, you need to create mapping for sender and recevier structure though it is same, then you add a very simple UDF for fine tune.
Use this UDF
Here a is the input value.
String b = "";
b = a.replaceAll(",", "0");
b = a.replaceAll("@", "0");
Like all the special characters you can take and replace with zero.
return b;
Thanx
Pothana

Handling Special characters in the data set

Hi All,
I am facing an issue in hadling special characters while writing data to a flat file.
The data fetched in toad query is *44CAÑADO* (with some specail character over N), but when this same data is written in textpad using UTL_FILE.put_line, the data written is converted to *44CAÃ‘ADO*.
Can anyone please help me how to handle these special charatcers so that the same data is written in text file as well.
Regards,
Shruti

To find the database characterset, please see (Character Sets & Conversion - Frequently Asked Questions [ID 227330.1] -- 2. What is the database character set used for and how is it set?)
For your issue, please see these MOS docs.
UTL_FILE Adds ^U (Control U) NAK Character At the End of the Line. [ID 604150.1]
Character set conversion when using UTL_FILE [ID 227531.1]
NLS_LANG Explained (How does Client-Server Character Conversion Work?) [ID 158577.1] -- 5.8 UTL_FILE is writing / reading incorrect characters.
Thanks,
Hussein

Is there any other way to handle special characters other than using CDATA?

I have xerces parser with which i am trying to parse data having special characters. Special characters also include other ascii characters. I tried using CDATA Section but still the problem persists.
It would be really helpful if anyone can help me in solving this problem.
Error encountered :
org.xml.sax.SAXParseException: An invalid XML character (Unicode: 0xf) was found in the CDATA section.
The XML which I use contains junk characters also . Have a look at the following:
<?xml version='1.0' encoding='UTF-8' ?>
<IMAGE_RESPONSE xmlns:xsi='http://www.w3.org/2001/XMLSchema-instance' xsi:noNamespaceSchemaLocation='ImageResponse.xsd'>
<IMG_TYPE>PNG</IMG_TYPE>
<IMG_WIDTH>650</IMG_WIDTH>
<IMG_HEIGHT>250</IMG_HEIGHT>
<IMAGE_DATA>
<IMGKEY>20020827:00000000:100000000010:02:</IMGKEY>
<IMAGE_INFO>This is image info</IMAGE_INFO>
<IMG_SOURCE>DCE_CIMS</IMG_SOURCE>
<FRONT_IMG_FBW><![CDATA[��&�J�Z�R��]]></FRONT_IMG_FBW>
<FBW_ERROR>B</FBW_ERROR>
<FRONT_IMG_FGS>C</FRONT_IMG_FGS>
<FGS_ERROR>D</FGS_ERROR>
<BACK_IMG_BBW>E</BACK_IMG_BBW>
<BBW_ERROR>D</BBW_ERROR>
<BACK_IMG_BGS>A</BACK_IMG_BGS>
<BGS_ERROR>Unable to retrieve Back Gray-Scale image</BGS_ERROR>
</IMAGE_DATA>
</IMAGE_RESPONSE>

java.net.URLEncoder.encode( text )
I've found this to be a pretty easy way to handle invalid characters...

How to Handle Special Characters in PI7.1

Hi Team,
I need to handle some special characters like <,>,& etc.. from WS Adapter to CRM in PI 7.1.
http://www.sdn.sap.com/irj/scn/weblogs?blog=/pub/wlg/9420 [original link is broken]
By using the above blog i had implemented the Java Code as
public void execute(InputStream in, OutputStream out){
try{
int read_data;
while((read_data = in.read()) != -1){
if (read_data == '&'){
out.write("&".getBytes());
}else if (read_data == '>'){
out.write(">".getBytes());
}else if (read_data == '<'){
out.write("<".getBytes());
}else if (read_data == '/'){
out.write("&frasl;".getBytes());
}else if (read_data == '\''){
out.write("'".getBytes());
else { out.write(read_data);
out.flush();
} catch (Exception e){}
I had added this class file in Operational Mapping.
It is working if we have only one IF condition for & in while
Any suggestion
Thanks
Sriram

Hi Ramesh,
Thanks for your inputs, I have tried your code but it is not working. The error message stays the same.
Dear Stephane,
To describe the error more, the requirement is the payload coming from source through WS Adapter consists of the special characters <, > , & which are basic sematics of XML syntax. I need PI to process this payload with special characters and successfully transfer it to target CRM system. I have created the Java class with code (ref: Blog 9420) as stated earlier and added this class to my existing Operation Mapping. I am expecting the java mapping to replace the special characters in payload like < with ">" . So as the case with the other characters >,&,'
After activaton of my operation mapping, I triggered the test message with Soap UI client and I could able to get a successful mapping only When I put the logic for &ampersand symbol only. However when I am trying to add the logic for > or < or ' the mapping is failing . I am using UTF-8 encoding across the source and PI enviroments.
Sample SOAP message :
<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" xmlns:urn="urn:abcabca.com">
 <soapenv:Header/>
 <soapenv:Body>
 <urn:MT_ABCDEFG_Req>
 <activity>
 <id/>
 <type>ZEMA</type>
 <actionType>C</actionType>
 <firewall>10000003</firewall>
 <subject>small > < attachment test</subject>
 <location/>
 <startDate>2010-07-08T10:53:31.000Z</startDate>
 <endDate>2010-07-08T10:53:31.000Z</endDate>
 <mainClient>1000319</mainClient>
 <mainContact>1000003</mainContact>
 <isConfidential>false</isConfidential>
 <summary/>
 <fullText>test body - small.txt</fullText>
 <owner>1000021</owner>
 <from>ABCDEDF</from>
 <sendTo>emailaddress</sendTo>
 <copyTo/>
 <keywords/>
 <referenceId/>
 <createdBy>1000021</createdBy>
 <additionalContacts/>
 <additionalClients/>
 <additionalParticipants/>
 <status>A0008</status>
 <attachments>
 <fileUrl>20100708110053-XXXXXXXXX</fileUrl>
 <fileName>small.txt</fileName>
 </attachments>
 <attachments>
 <fileUrl>20100708110053-XXXXXXXXX</fileUrl>
 <fileName>EMail 2010-07-08.pdf</fileName>
 </attachments>
 </activity>
 </urn:MT_ABCDEFG_Req>
 </soapenv:Body>
</soapenv:Envelope>
Output on the SOAP UI client for the above request:

<SOAP:Envelope xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
 <SOAP:Body>
 <SOAP:Fault>
 <faultcode>SOAP:Server</faultcode>
 <faultstring>Server Error</faultstring>
 <detail>
 <s:SystemError xmlns:s="http://sap.com/xi/WebService/xi2.0">
 <context>XIAdapter</context>
 <code>ADAPTER.JAVA_EXCEPTION</code>
 <text>com.sap.engine.interfaces.messaging.api.exception.MessagingException: com.sap.engine.interfaces.messaging.api.exception.MessagingException: XIServer:NO_MAPPINGPROGRAM_FOUND:
 at com.sap.aii.adapter.soap.ejb.XISOAPAdapterBean.process(XISOAPAdapterBean.java:1160)
 at sun.reflect.GeneratedMethodAccessor342.invoke(Unknown Source)
 at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
 at java.lang.reflect.Method.invoke(Method.java:585)
 at com.sap.engine.services.ejb3.runtime.impl.RequestInvocationContext.proceedFinal(
What do you think where I am doing the wrong?
Sriram

How to handle special characters in metadata?

I have an implementation in C# to call ACS webservices for a long time. Last week we realized that some special characters in metadata fields are making the package request to not work. Example characters: éë. The response from ACS contains E_ADEPT_DISTRIBUTOR_AUTH. If we remove the special character, the request works as expected.
I know that characters are working in the jar application but we can't manage to make them work from our C# application.
Any help is welcome.

Doing a SHA1-HMAC is relatively simple and there are only two inputs, the key and the message.
Since you say this works correctly with lower ascii characters, but not with Unicode characters then I would assume you have the key correct and the only thing that is different is the message. Also since it works correctly with lower ascii characters then you have the XML infoset serialization correct, so assuming a similiarly sized message (ie take one character and replace with a unicode character), then your problem is going to be in the character encoding.
I would suggest some healthy paranoia about this, by verifying that the byte stream being hashed is indeed correctly UTF8 encoded by looking at the hex values (breakpoint in the SHA1-HMAC code) and comparing to a UTF8 table such as http://www.utf8-chartable.de.

Can actionscript handle special characters/han or chinese characters?

Similar Messages

Maybe you are looking for