Can an Answer from Listbox automatically fill a checkbox

I have a form that asks several questions.  Each question has a set of checkboxes on the left with a correlating list box of points on the right.  Is there a way for the form to automatically fill the checkbox on the left when the point amount is chosen or vice versa?  Please see the example below.
In approximately how many years do you expect to need this money?
Check Box Answers                                Points (List Box)
  2 – 3 years                                                  20
  4 – 6 years                                                  38
  7 – 10 years                                                 50
  10+ years                                                    69
If you expect to have other major expenses (such as college tuition, home down payment, home repairs, etc.), do you have a separate savings plan for these expenses?
Check Box Answers                                                              Points (List Box)                               
  Yes, I have a separate savings plan for these expenses.                     0
  I do not expect to have any such expenses.                                      1
  I intend to withdraw a portion of this money for these expenses           3
  I have no separate savings plan for these items at this time.                4
Any assistance with this question greatly appreciated.

** New Question with different form fields. Can Checkbox Answers autofill a Drop Box List?
I have a form that asks several questions.  Each question has a set of checkboxes on the left with a correlating DROP BOX of points on the right.  Is there a way for the form to automatically fill the checkbox on the left when the point amount is chosen or vice versa?  Please see the example below.
SAMPLE QUESTION #1
In approximately how many years do you expect to need this money?
Check Box Answers                                Points (Drop Box)
  2 – 3 years                                                  20
  4 – 6 years                                                  38
  7 – 10 years                                                 50
  10+ years                                                    69
SAMPLE QUESTION #2
If you expect to have other major expenses (such as college tuition, home down payment, home repairs, etc.), do you have a separate savings plan for these expenses?
Check Box Answers                                                              Points (Drop Box)                             
  Yes, I have a separate savings plan for these expenses.                     0
  I do not expect to have any such expenses.                                      1
  I intend to withdraw a portion of this money for these expenses           3
  I have no separate savings plan for these items at this time.                4
Any help with this would be greatly appreciate

Similar Messages

  • How can I delete old addresses from the automatic fill?

    I set up a new account on a G4 PowerMac with 10.3.9 installed. This computer was being used previously by one of my other users. My question is: whenever the new user wants to send a new message and she types in the address she needs to use, it is set to automatically fill the address. All of the old user's addresses still appear as choices. How do I delete all the old addresses? I've already deleted all the old addresses from the address book. But they still appear in the automatic fill. Is there a cache somewhere to empty?
    Help!
    PowerMac G5 2.3GHz 250 HD 1.5 Gb RAM   Mac OS X (10.4.5)  

    Kately,
    Mail>Window>Previous Recipients>(Select as desired) then click on "Remove From List"
    ;~)

  • HP P2055 (network) - Can't print from trays automatically

    Hi all,
    Have a problem with a HP P2055 (networked) printer. We have the addional tray on it, so it has 3 trays in total. It won't print from any tray except the 1st (bypass) tray. Any print job that is sent through to the printer automatically moves to the 1st (bypass tray) and it requires the user to press the "OK" button on the printer to start the job. The job will not start automatically.
    This is causing us a massive headache, as a lot of the MS Word letter templates our users want to print have been configured to print the 1st page from tray 2 (filled with headed paper) and the subsequent pages from tray 3. This works on all our other printers but not this one - where are we going wrong?! 
    Many thanks for any help
    Kev

    Hi Shellshokd,
    Try using the HP Universal Printer Driver which supports a wide set of printers. 
    The driver is available at this location.
    http://www8.hp.com/us/en/solutions/business-solutions/printingsolutions/upd.html
    Also, just to let you know ePrint also supports some other formats apart from PDF. You can mail doc, docx, xls, xlsx, ppt, pptx, txt, html, jpeg, jpg, png, bmp, gif and tiff files directly to your printers email ID. 
    I hope this helps.
    Regards,
    Oliver
    "Although I work for HP, I'm speaking for myself and not on behalf of HP"--Please mark the post that solves your problem as "Accepted Solution"
    "Say "Thanks" by clicking the Kudos Star in the post that helped you.

  • How do you delete photos from the new itunes 11.0.1.12 or how do you find were their on your computer so you can delete them from their

    using itunes 11.0.1.12 needing to know how to delete photos off my ipad 2 from inported photos off my computer   i have seen were some people say to go were the photos were inported from but how do i know were that  is or how can i find out were that is no photos tab on new i tunes bad choice on  apples choice or if none can be answered from above how do you revert back the older virsion of itunes please help  

    Your photos are either in iPhoto (Mac) or Photo Manager (Windows)
    1. In the new Itunes you can go to View and select show sidebar.
    2. When you plug in your device you should see your iPad.
    3.  Click on the iPad - you should see a screen like this
    Select/deselect the photos you want synced to the iPad.
    Hope this helps

  • How can I stop my information from automatically filling in.  Which it does incorrectly.

    How can I stop my information from automatically filling in.  Which it does incorrectly.

    one u log in to a wi fi..it will save. delete it... and off your wifi on you playbook. hope it helps

  • How can I prevent Firefox from automatically filling in my passward in every site I visit? I have NO security now when others use computer.

    Everytime anyone on this computer goes to my AOL or YAHOO email, Firefox automatically fills in my password and whoever is using my computer can read my email or check bank balances or anything else. I have just started using Firefox and now have NO security. Can anyone help me change the security settings?

    Also, make sure you have a password on your user account - if you share a computer without separate Windows accounts, they have access to all your information regardless of whether you stay logged in or not, and regardless of whether passwords are saved or not. Make everyone else use the guest account or their own limited account.

  • I purchased my iMac used.  When I try to update my apps the computer automatically fills in the previous owner's Apple ID and I can't change it.  Any ideas?

    I purchased my iMac used.  When I try to update apps in AppStore, the computer automatically fills in the previous owner's email address and it won't let me delete it to enter mine.  I have been using my own apple ID and password on this computer for other things without a problem.  Any ideas?

    Before buying a second-hand computer, you should have run Apple Diagnostics or the Apple Hardware Test, whichever is applicable.
    The first thing to do after buying the computer is to erase the internal drive and install a clean copy of OS X. You—not the original owner—must do that. Changes made by Apple over the years have made this seemingly straightforward task very complex.
    How you go about it depends on the model, and on whether you already own another Mac. If you're not sure of the model, enter the serial number on this page. Then find the model on this page to see what OS version was originally installed.
    It's unsafe, and may be unlawful, to use a computer with software installed by a previous owner.
    1. If you don't own another Mac
    a. If the machine shipped with OS X 10.4 or 10.5, you need a boxed and shrink-wrapped retail Snow Leopard (OS X 10.6) installation disc from the Apple Store or a reputable reseller—not from eBay or anything of the kind. If the machine is very old and has less than 1 GB of memory, you'll need to add more in order to install 10.6. Preferably, install as much memory as it can take, according to the technical specifications.
    b. If the machine shipped with OS X 10.6, you need the installation media that came with it: gray installation discs, or a USB flash drive for a MacBook Air. You should have received the media from the original owner, but if you didn't, order replacements from Apple. A retail disc, or the gray discs from another model, will not work.
    To start up from an optical disc or a flash drive, insert it, then restart the computer and hold down the C key at the startup chime. Release the key when you see the gray Apple logo on the screen.
    c. If the machine shipped with OS X 10.7 or later, you don't need media. It should start up in Internet Recovery mode when you hold down the key combination option-command-R at the startup chime. Release the keys when you see a spinning globe.
    d. Some 2010-2011 models shipped with OS X 10.6 and received a firmware update after 10.7 was released, enabling them to use Internet Recovery. If you have one of those models, you can't reinstall 10.6 even from the original media, and Internet Recovery will not work either without the original owner's Apple ID. In that case, contact Apple Support, or take the machine to an Apple Store or another authorized service provider to have the OS installed.
    2. If you do own another Mac
    If you already own another Mac that was upgraded in the App Store to the version of OS X that you want to install, and if the new Mac is compatible with it, then you can install it. Use Recovery Disk Assistant to prepare a USB device, then start up the new Mac from it by holding down the C key at the startup chime. Alternatively, if you have a Time Machine backup of OS X 10.7.3 or later on an external hard drive (not a Time Capsule or other network device), you can start from that by holding down the option key and selecting it from the row of icons that appears. Note that if your other Mac was never upgraded in the App Store, you can't use this method.
    3. Partition and install OS X
    a. If you see a lock screen when trying to start up from installation media or in Recovery mode, then a firmware password was set by the previous owner, or the machine was remotely locked via iCloud. You'll either have to contact the owner or take the machine to an Apple Store or another service provider to be unlocked. You may be asked for proof of ownership.
    b. Launch Disk Utility and select the icon of the internal drive—not any of the volume icons nested beneath it. In the  Partition tab, select the default options: a GUID partition table with one data volume in Mac OS Extended (Journaled) format. This operation will permanently remove all existing data on the drive.
    c. An unusual problem may arise if all the following conditions apply:
              OS X 10.7 or later was installed by the previous owner
              The startup volume was encrypted with FileVault
              You're booted in Recovery mode (that is, not from a 10.6 installation disc)
    In that case, you won't be able to unlock the volume or partition the drive without the FileVault password. Ask for guidance or see this discussion.
    d. After partitioning, quit Disk Utility and run the OS X Installer. If you're installing a version of OS X acquired from the App Store, you will need the Apple ID and password that you used. When the installation is done, the system will automatically restart into the Setup Assistant, which will prompt you to transfer the data from another Mac, its backups, or from a Windows computer. If you have any data to transfer, this is usually the best time to do it.
    e. Run Software Update and install all available system updates from Apple. To upgrade to a major version of OS X newer than 10.6, get it from the Mac App Store. Note that you can't keep an upgraded version that was installed by the original owner. He or she can't legally transfer it to you, and without the Apple ID you won't be able to update it in Software Update or reinstall, if that becomes necessary. The same goes for any App Store products that the previous owner installed—you have to repurchase them.
    4. Other issues
    a. If the original owner "accepted" the bundled iLife applications (iPhoto, iMovie, and Garage Band) in the App Store so that he or she could update them, then they're irrevocably linked to that Apple ID and you won't be able to download them without buying them. Reportedly, Mac App Store Customer Service has sometimes issued redemption codes for these apps to second owners who asked.
    b. If the previous owner didn't deauthorize the computer in the iTunes Store under his Apple ID, you wont be able to  authorize it immediately under your ID. In that case, you'll either have to wait up to 90 days or contact iTunes Support.
    c. When trying to create a new iCloud account, you might get a failure message: "Account limit reached." Apple imposes a lifetime limit of three iCloud account setups per device. Erasing the device does not reset the limit. You can still use an iCloud account that was created on another device, but you won't be able to create a new one. Contact iCloud Support for more information. The setup limit doesn't apply to Apple ID accounts used for other services, such as the iTunes and Mac App Stores, or iMessage. You can create as many of those accounts as you like.

  • How did I lose all my passwords that automatically filled in? Can I get them back?

    I used to have all my passwords stored, so it automatically filled them in. Now it has lost them all, and it doesn't have a popup from firefox where it asks if I want the word stored. I need my OLD passwords back..I don't have them and now can't get into many of my sites. Thanks for any help you can give me.. I no longer have that bar on the top either.

    See https://support.mozilla.com/en-US/questions/901716

  • Automatically fill in field based on data from table rows

    hello,
    Users in our organization currently have to complete a number of different forms when an accident occurs. I am creating a .pdf that combines these fomrs into one, with the first portion being a data input section where the user inputs the data and then this populates other sections (pages of the form) that can later be saved and printed.
    The data input section contains subforms with tables. The tables have a row that has "add new item" and "delete this item" buttons.  The rows have dropdown list fields.
    I would like to create a field that will be automatically filled in with the values from the dropdown lists, including the values from the new rows that are added using the 'add new item' button.
    Any assistance in this regard would be most appreciated.  This is my first time on a forum, so I apologize if I have not been clear.
    Thank you.

    This is pretty complicated. You'll have to use scripting for this and I'll tell you how I'd approach this with JavaScript.
    First of all you need to decide at what point you want to populate this field with the drop down selections. I think you have two options.
    Option 1 - Automatically calculate this field each time a user makes a drop-down selection. It's possible that a user will enter data and then change a drop down value so you'll have to account for this.
    Option 2 - Create an update button that users click to calculate this field. There is still a risk that users will change the value in the drop down after clicking update, so you would want to use scripting to lock those fields (e.g. make them protected) when the update button is clicked. You could then change the caption of this same button or have a second button that when clicked would unlock those drop down fields.
    The other thing you need to do is figure out how to calculate this field. It seems to me you would probably build a string together that mixes text with the drop-down values. So your JavaScript would look something like this:
    calculatedField.rawValue = "The accident occurred on " + table.row1.date.rawValue + ". It was witnessed by " + table.row1.witness1.rawValue +
                                                      " and " + table.row1.witness2.rawValue + ".";
    When you're in the LC Designer JavaScript editor, hold control for the relative path to those fields and control + shift for the absolute path and then click on the fields whose values you want to access.
    I hope this points you in the right direction!

  • Automatically fill cells from reference table

    Not sure if this is even possible, but I thought I'd ask and see if anyone knows of a way to do this. Here goes.
    Can I have cells fill in information automatically from a reference table in another sheet? What I'm trying to do is this:
    I need to keep training records for a group. What I've created is a numbers document with two sheets. In the first sheet, I have a single table with two columns that lists all of the training courses in column B with their course codes in column A. For example, let's say that course C32 (listed in Column A) is a "Basic Training" course (so "Basic Training" is in column B). On the next row is the next course, the next row is the next course, etc. This is my reference table.
    Now in the second sheet, I have a table for each person. Each table is three columns. In the first I enter the course code they've taken, in the second I enter the date they took it, and what I'd LIKE to have happen is that when I enter the course code in Column A, the description from the reference table automatically fills into the third column. That way I don't have to type all the course descriptions over and over. (Some of them are fairly lengthy).
    Is there any way to do this in numbers?
    Thanks

    Yes, it is possible. Use the LOOKUP function. However, your lookup table must be in the same document, but can be on a separate sheet.
    Create a table of the course names (2 columns, code in A and name in B) and call the table (not the containing sheet) something significant such as "Course names". Then in Column C of each persons table use the formula =LOOKUP(A, Course Names :: A, Course names :: B). This says take the code reference from the first cell on the line (local column A) and compare it with the codes in the first column (Course names :: A) of the Course names table, and return the value from the second column (Course names :: B) of the matching row.
    Remember to enter the formula as a column formula to save having to repeat it in each cell.

  • How can we automatically fill some caracteristics when inserting manual inp

    Hello everyone,
    In our project we've got to automatically fill some characteristics when we're introducing new manual input records.
    We've got a dropdown for cost center and a dropdown for company code and we needed to write the values chosen in dropdowns in these characteristics automatically when introducing new records in the manual input line.
    Can anyone help me with this?
    Thanks in advance
    Best Regards
    João Anastácio

    Hi Srinivas,
    Thanks for your reply.
    But when the user selects a value for costcenter from the dropdown box, the column costcenter remains empty, for the new line. So the user still has to fill the value, isn't that right?
    What is the add new values button?
    Thanks
    Best Regards
    João Anastácio

  • When signing in after I get my e-Mail address in the block how can I get my password to automatically fill in?

    When signing in to the internet using Firefox when I type in the first letter of my e-mail address it brings up the entire address which I click on an it fills in the blank. On my laptop at this point when it fills in the e-Mail address it automatically fills in my password; however, on my desktop it does not fill in the password, I have to type it in. I use Firefox on my laptop also so I don't know why it works on one system and not on the other.
    Thank you for your consideration.
    Sincerely,
    Richard Jakubec

    You should try addon like Lastpass, read more about it here
    * lastpass.com
    download Lastpass from here
    * https://rodan.lastpass.com/lp_win.xpi

  • How can I stop music and movies from being automatically deleted from my phone and saved on the cloud? I've just tried to watch a movie on my 2 hour commute, but yet AGAIN it has been removed. I do NOT want to spank all of my data allowance

    How can I stop music and movies from being automatically deleted from my phone and saved on the cloud? I've just tried to watch a movie on my 2 hour commute, but yet AGAIN it has been removed. I do NOT want to spank all of my data allowance downloading it again, especially because (believe it or not) I added it to my phone because that's precisely where I wanted it!! Any help much appreciated

    FYI I had to put this link into firefox to reply - because **** back safari just wouldn't register my clicks to any of the links on the post... Despite reloadeing and even restarting my computer. Totally annoying and a massive pain in the ***.
    But in terms of my initial query; thanks for responding. But no, this is NOT the cause of the problem. I have auto sync and sync over wifi activated, but have also selected manually manage music and videos. Plus, all of my music and videos are on my macbook, absolutely all of it, so if it my phone was syncing with my macbook everything would still be on the phone. Life would be peachy if my phone jsut copied everything that was on my macbook, but unfortuantely it keeps deleting tracks for no apparent reason.
    Any thoughts greatly welcomed, because at the moment i can only conclude that my iphone is crap.

  • How can I  remove my credit card from the automatic billing for my account?

    How can I remove my credit card from the automatic billing for my account?

    The following has instructions for changing iTunes payment method: http://support.apple.com/kb/ht1918

  • Can't stop applications from opening automatically at login

    A few months ago I tried the "open at login" feature for 4 of the applications in my dock. I have decided it is more of a hassle than it's worth and unchecked "open at login." That didn't stop them from opening automatically. I went into Accounts and made sure the "Login Items" tab was empty. That also didn't work. I even added the programs into the tab, restarted and deleted them. I searched the Apple website and read that you can bypass applications launching automatically by holding shift at the blue screen on startup and then again after typing the password. I set the computer to not login automatically and hold shift every time I start the computer up. I would like to know if anyone else has had this problem and what they did about it. Is there a way to stop them from opening without having to log in every time? Thank you.

    go to the directory homedirectory/library/preferences and delete the files loginwindow.plist and com.apple.loginitems.plist. Then log out/in normally. nothing should start up by itself.

Maybe you are looking for