Can any one help? "Windows cannot repair this computer automatically."
I have a laptop satellite L455-S5000.
And when I try and trun on my computer a black screen comes on that says "windows is loading files..."
and after it loads a window pops up saying "startup repair is checking your computer for problems..."
and after that gets done it says "Windows cannot repair this computer automatically" so I click "Send information about this problem (recommended)" and then I click "finish" then it shuts down. when I try turning it back on it does the same thing over. Please can any one help me fix it? Im really clueless about computers and I have know Idea what is wrong with it, or how to even go about fixing it. thanks.
_Ashley_
Turn the laptop off, hold down F8, turn the laptop on and let go of F8 when you see the Advanced Boot Options.
In here, choose Repair Your Computer then press enter, follow the prompts, choose System Restore and restore your laptop to a point before the problems started.
If the laptop cant get you there, a system recovery starts the laptop from it's factory state but you loose your programs and files doing that. Holding the "0" beside "9" while you turn the laptop on boots the laptop from its recovery partition if you accept data loss.
Similar Messages
-
"Windows cannot repair this computer automatically" - Satellite C660-108
Got a new laptop for Christmas yesterday and it worked fine yesterday, I came home this evening and it wanted me to click restore and then restart. I done that, now every time I go to turn the machine on it brings up the message "Windows cannot repair this computer automatically" and a saying about having any external devices plugged in and to remove then (which I don't)...
Phoned "The Tech Guys" they said it was probably because when i started the laptop so many updates etc have happened and one of them have gone wrong and I need to phone back with the receipt and they will go through it with me.
So I plan to do so, but I would like it if people could give advise on how to fix this.
Thanks :)Hi
As I understood the last message; the HDD recovery could be started properly but you are not able to log in the Windows. Is it right?
Did you try to repeat this procedure once again? If not, do this and try to recover the notebook using HDD recovery.
Before you would start the recovery again, please go to BIOS pressing F8 and set the BIOS to default settings. Save the changes and try the HDD recovery. -
Hi i am getting an error like this while installing Live Cycle Server " The file merge_modules\lc11_common_iam_zip does not exist This file is required sucessfullly run the Live Cycle Installer.Can any one help me on resolving this issue it would be of great help..thanks .
I think in your situation it would be worth trying the things listed under the event. It does have to do with FRS and it's easy to do. I've used it to fix journal errors after a server unexpectedly restarts and sysvol stops replicating. I
could see where it could fix your issue, and if it doesn't, you're out 5 minutes. :)
The listed registry key does not exist
Expand HKEY_LOCAL_MACHINE.
Click down the key path:
"System\CurrentControlSet\Services\NtFrs\Parameters"
Double click on the value name
"Enable Journal Wrap Automatic Restore"
-
Can any one help me to tune this query
This is the query.
~~~~~~~~~~
SELECT
S_CONTACT.ROW_ID,
S_CONTACT.MODIFICATION_NUM,
S_CONTACT.LAST_UPD
FROM
S_CONTACT,
S_CONTACT_FNX,
S_ETL_I_IMG_118 IMG
WHERE
IMG.ROW_ID = S_CONTACT_FNX.ROW_ID
AND
S_CONTACT_FNX.PAR_ROW_ID = S_CONTACT.ROW_ID
AND NOT EXISTS
( SELECT 'X'
FROM
S_ETL_I_IMG_12 IMG1
WHERE
IMG1.ROW_ID = S_CONTACT.ROW_ID
UNION ALL
SELECT
S_CONTACT.ROW_ID,
S_CONTACT.MODIFICATION_NUM,
S_CONTACT.LAST_UPD
FROM
S_CONTACT,
S_ETL_I_IMG_109 IMG
WHERE
IMG.ROW_ID = S_CONTACT.PR_SPECIALTY_ID
AND NOT EXISTS
( SELECT 'X'
FROM
S_ETL_I_IMG_12 IMG1
WHERE
IMG1.ROW_ID = S_CONTACT.ROW_ID
UNION ALL
SELECT
S_CONTACT.ROW_ID,
S_CONTACT.MODIFICATION_NUM,
S_CONTACT.LAST_UPD
FROM
S_CONTACT,
S_ETL_I_IMG_113 IMG
WHERE
IMG.ROW_ID = S_CONTACT.MED_SPEC_ID
AND NOT EXISTS
( SELECT 'X'
FROM
S_ETL_I_IMG_12 IMG1
WHERE
IMG1.ROW_ID = S_CONTACT.ROW_ID
UNION ALL
SELECT
S_CONTACT.ROW_ID,
S_CONTACT.MODIFICATION_NUM,
S_CONTACT.LAST_UPD
FROM
S_CONTACT,
S_ETL_I_IMG_125 IMG
WHERE
IMG.ROW_ID = S_CONTACT.REGION_ID
AND NOT EXISTS
( SELECT 'X'
FROM
S_ETL_I_IMG_12 IMG1
WHERE
IMG1.ROW_ID = S_CONTACT.ROW_ID
Below is the explain plan
~~~~~~~~~~~~~~~~~~~~~
PLAN_TABLE_OUTPUT
Plan hash value: 363891185
| Id | Operation | Name | Rows | Bytes |TempSpc| Cost (%CPU)| Time |
| 0 | SELECT STATEMENT | | 4 | 334 | | 214K(100)| 00:42:50 |
| 1 | UNION-ALL | | | | | | |
|* 2 | HASH JOIN ANTI | | 1 | 64 | | 122 (1)| 00:00:02 |
| 3 | NESTED LOOPS | | 3518 | 178K| | 119 (0)| 00:00:02 |
| 4 | NESTED LOOPS | | 3518 | 98504 | | 13 (0)| 00:00:01 |
| 5 | INDEX FULL SCAN | S_ETL_I_IMG_118_M2 | 3518 | 35180 | | 1 (0)| 00:00:01 |
PLAN_TABLE_OUTPUT
| 6 | TABLE ACCESS BY INDEX ROWID| S_CONTACT_FNX | 1 | 18 | | 1 (0)| 00:00:01 |
|* 7 | INDEX UNIQUE SCAN | S_CONTACT_FNX_P1 | 1 | | | 1 (0)| 00:00:01 |
| 8 | TABLE ACCESS BY INDEX ROWID | S_CONTACT | 1 | 24 | | 1 (0)| 00:00:01 |
|* 9 | INDEX UNIQUE SCAN | S_CONTACT_P1 | 1 | | | 1 (0)| 00:00:01 |
| 10 | INDEX FULL SCAN | S_ETL_I_IMG_12_M2 | 94772 | 1110K| | 2 (0)| 00:00:01 |
| 11 | NESTED LOOPS | | 1 | 70 | | 214K (1)| 00:42:49 |
| 12 | MERGE JOIN ANTI | | 1 | 38 | | 214K (1)| 00:42:49 |
|* 13 | TABLE ACCESS BY INDEX ROWID | S_CONTACT | 72253 | 1834K| | 213K (1)| 00:42:43 |
| 14 | INDEX FULL SCAN | S_CONTACT_P1 | 57M| | | 2904 (1)| 00:00:35 |
|* 15 | SORT UNIQUE | | 94772 | 1110K| 3736K| 441 (2)| 00:00:06 |
| 16 | INDEX FULL SCAN | S_ETL_I_IMG_12_M2 | 94772 | 1110K| | 2 (0)| 00:00:01 |
PLAN_TABLE_OUTPUT
|* 17 | INDEX RANGE SCAN | S_ETL_I_IMG_109_M2 | 1 | 32 | | 1 (0)| 00:00:01 |
| 18 | NESTED LOOPS | | 1 | 100 | | 3 (0)| 00:00:01 |
| 19 | NESTED LOOPS ANTI | | 1 | 68 | | 2 (0)| 00:00:01 |
| 20 | TABLE ACCESS BY INDEX ROWID | S_CONTACT | 1 | 56 | | 1 (0)| 00:00:01 |
|* 21 | INDEX FULL SCAN | S_CONTACT_F58 | 1 | | | 1 (0)| 00:00:01 |
|* 22 | INDEX RANGE SCAN | S_ETL_I_IMG_12_M2 | 94772 | 1110K| | 1 (0)| 00:00:01 |
|* 23 | INDEX RANGE SCAN | S_ETL_I_IMG_113_M2 | 1 | 32 | | 1 (0)| 00:00:01 |
| 24 | NESTED LOOPS ANTI | | 1 | 100 | | 3 (0)| 00:00:01 |
| 25 | NESTED LOOPS | | 1 | 88 | | 2 (0)| 00:00:01 |
| 26 | TABLE ACCESS BY INDEX ROWID | S_CONTACT | 1 | 56 | | 1 (0)| 00:00:01 |
|* 27 | INDEX FULL SCAN | S_CONTACT_F62 | 1 | | | 1 (0)| 00:00:01 |
PLAN_TABLE_OUTPUT
|* 28 | INDEX RANGE SCAN | S_ETL_I_IMG_125_M2 | 1 | 32 | | 1 (0)| 00:00:01 |
|* 29 | INDEX RANGE SCAN | S_ETL_I_IMG_12_M2 | 94772 | 1110K| | 1 (0)| 00:00:01 |
Predicate Information (identified by operation id):
2 - access("IMG1"."ROW_ID"="S_CONTACT"."ROW_ID")
7 - access("IMG"."ROW_ID"="S_CONTACT_FNX"."ROW_ID")
9 - access("S_CONTACT_FNX"."PAR_ROW_ID"="S_CONTACT"."ROW_ID")
13 - filter("S_CONTACT"."PR_SPECIALTY_ID" IS NOT NULL)
PLAN_TABLE_OUTPUT
15 - access("IMG1"."ROW_ID"="S_CONTACT"."ROW_ID")
filter("IMG1"."ROW_ID"="S_CONTACT"."ROW_ID")
17 - access("IMG"."ROW_ID"="S_CONTACT"."PR_SPECIALTY_ID")
21 - filter("S_CONTACT"."MED_SPEC_ID" IS NOT NULL)
22 - access("IMG1"."ROW_ID"="S_CONTACT"."ROW_ID")
23 - access("IMG"."ROW_ID"="S_CONTACT"."MED_SPEC_ID")
27 - filter("S_CONTACT"."REGION_ID" IS NOT NULL)
28 - access("IMG"."ROW_ID"="S_CONTACT"."REGION_ID")
29 - access("IMG1"."ROW_ID"="S_CONTACT"."ROW_ID")PLAN_TABLE_OUTPUT
Plan hash value: 363891185
| Id | Operation | Name | Rows | Bytes |TempSpc| Cost (%CPU)| Time |
| 0 | SELECT STATEMENT | | 4 | 334 | | 214K(100)| 00:42:50 |
| 1 | UNION-ALL | | | | | | |
|* 2 | HASH JOIN ANTI | | 1 | 64 | | 122 (1)| 00:00:02 |
| 3 | NESTED LOOPS | | 3518 | 178K| | 119 (0)| 00:00:02 |
| 4 | NESTED LOOPS | | 3518 | 98504 | | 13 (0)| 00:00:01 |
| 5 | INDEX FULL SCAN | S_ETL_I_IMG_118_M2 | 3518 | 35180 | | 1 (0)| 00:00:01 |
PLAN_TABLE_OUTPUT
| 6 | TABLE ACCESS BY INDEX ROWID| S_CONTACT_FNX | 1 | 18 | | 1 (0)| 00:00:01 |
|* 7 | INDEX UNIQUE SCAN | S_CONTACT_FNX_P1 | 1 | | | 1 (0)| 00:00:01 |
| 8 | TABLE ACCESS BY INDEX ROWID | S_CONTACT | 1 | 24 | | 1 (0)| 00:00:01 |
|* 9 | INDEX UNIQUE SCAN | S_CONTACT_P1 | 1 | | | 1 (0)| 00:00:01 |
| 10 | INDEX FULL SCAN | S_ETL_I_IMG_12_M2 | 94772 | 1110K| | 2 (0)| 00:00:01 |
| 11 | NESTED LOOPS | | 1 | 70 | | 214K (1)| 00:42:49 |
| 12 | MERGE JOIN ANTI | | 1 | 38 | | 214K (1)| 00:42:49 |
|* 13 | TABLE ACCESS BY INDEX ROWID | S_CONTACT | 72253 | 1834K| | 213K (1)| 00:42:43 |
| 14 | INDEX FULL SCAN | S_CONTACT_P1 | 57M| | | 2904 (1)| 00:00:35 |
|* 15 | SORT UNIQUE | | 94772 | 1110K| 3736K| 441 (2)| 00:00:06 |
| 16 | INDEX FULL SCAN | S_ETL_I_IMG_12_M2 | 94772 | 1110K| | 2 (0)| 00:00:01 |
PLAN_TABLE_OUTPUT
|* 17 | INDEX RANGE SCAN | S_ETL_I_IMG_109_M2 | 1 | 32 | | 1 (0)| 00:00:01 |
| 18 | NESTED LOOPS | | 1 | 100 | | 3 (0)| 00:00:01 |
| 19 | NESTED LOOPS ANTI | | 1 | 68 | | 2 (0)| 00:00:01 |
| 20 | TABLE ACCESS BY INDEX ROWID | S_CONTACT | 1 | 56 | | 1 (0)| 00:00:01 |
|* 21 | INDEX FULL SCAN | S_CONTACT_F58 | 1 | | | 1 (0)| 00:00:01 |
|* 22 | INDEX RANGE SCAN | S_ETL_I_IMG_12_M2 | 94772 | 1110K| | 1 (0)| 00:00:01 |
|* 23 | INDEX RANGE SCAN | S_ETL_I_IMG_113_M2 | 1 | 32 | | 1 (0)| 00:00:01 |
| 24 | NESTED LOOPS ANTI | | 1 | 100 | | 3 (0)| 00:00:01 |
| 25 | NESTED LOOPS | | 1 | 88 | | 2 (0)| 00:00:01 |
| 26 | TABLE ACCESS BY INDEX ROWID | S_CONTACT | 1 | 56 | | 1 (0)| 00:00:01 |
|* 27 | INDEX FULL SCAN | S_CONTACT_F62 | 1 | | | 1 (0)| 00:00:01 |
PLAN_TABLE_OUTPUT
|* 28 | INDEX RANGE SCAN | S_ETL_I_IMG_125_M2 | 1 | 32 | | 1 (0)| 00:00:01 |
|* 29 | INDEX RANGE SCAN | S_ETL_I_IMG_12_M2 | 94772 | 1110K| | 1 (0)| 00:00:01 |
Predicate Information (identified by operation id):
2 - access("IMG1"."ROW_ID"="S_CONTACT"."ROW_ID")
7 - access("IMG"."ROW_ID"="S_CONTACT_FNX"."ROW_ID")
9 - access("S_CONTACT_FNX"."PAR_ROW_ID"="S_CONTACT"."ROW_ID")
13 - filter("S_CONTACT"."PR_SPECIALTY_ID" IS NOT NULL)
PLAN_TABLE_OUTPUT
15 - access("IMG1"."ROW_ID"="S_CONTACT"."ROW_ID")
filter("IMG1"."ROW_ID"="S_CONTACT"."ROW_ID")
17 - access("IMG"."ROW_ID"="S_CONTACT"."PR_SPECIALTY_ID")
21 - filter("S_CONTACT"."MED_SPEC_ID" IS NOT NULL)
22 - access("IMG1"."ROW_ID"="S_CONTACT"."ROW_ID")
23 - access("IMG"."ROW_ID"="S_CONTACT"."MED_SPEC_ID")
27 - filter("S_CONTACT"."REGION_ID" IS NOT NULL)
28 - access("IMG"."ROW_ID"="S_CONTACT"."REGION_ID")
29 - access("IMG1"."ROW_ID"="S_CONTACT"."ROW_ID") -
i have a string 2012-05-22T23:23:42.263-07:00. so i want to convert in date with indian time zone can any one help me out
What does this have to do with iPhone tech support?
-
I cannot install latest itunes to my Sony notebook which is running on traditional chinese windows 7 64-bit, the error message is something like unrecognized windows package, can any one help me or has similar experience? Thanks.
iTunes 9.0.x is certainly compatible with Win7 64 bit since I use that exact setup on 3 different PCs. Two suggestions for your installation problems:
1)Download a new copy of the 64 bit installer from Apple then, instead of just running the itunes installer right click on it and try 'run as adminstrator'. In my experience that clears up a world of problems with program installation in Win7 and Vista. This is necessary even if you're already logged in as an administrator.
2) Try the previous version of iTunes (9.0.3). You can get a copy at http://www.oldapps.com/itunes.php?old_itunes=54 again right click on the file and "run as administrator"
Good luck, hope this helps.
Lil -
I can no longer back up my iphone to my computer on selecting 'sync'. I can back up to iCloud but I get an error message telling me I cannot backup to my Mac. Can any one help? It's driving me crazy!
Hello joelfromn. charleston,
It seems you are unable to activate iMessage on a device with no carrier service. The following article provides information regarding activation issues:
If you get an error when trying to activate iMessage or FaceTime - Apple Support
Check your device settings
Make sure that you’re connected to a cellular data or Wi-Fi network. If you're using an iPhone, you'll need SMS messaging to activate your phone number with iMessage and FaceTime. Depending on your carrier, you might be charged for this SMS.
Go to Settings > General > Date & Time and make sure that your time zone is set up correctly.
Thank you for contributing to Apple Support Communities.
Cheers,
Bobby_D -
Can any one help me how to install webcenter sites on windows
I'm new to WCS ,can any one help me how to install WCS on windows 64 bit. (not Jump starter kit)
I had downloaded " ofm_sites_generic_11.1.1.6_bp1_disk1_1of1.zip " from ONT forum
can any one guide me with step by step procedure to intall
Edited by: 1000252 on Apr 15, 2013 11:59 PMHi
You can find the installation documentation here:
http://docs.oracle.com/cd/E29495_01/index.htm
The way the documentation is structured it is structured based on the Application server you would like to use in your installation.
You might want to look into the following docs, again depending on your choice of supported application server and database server:
- Installing on Apache Tomcat Application Server
- Installing on IBM WebSphere Application Server
- Installing on Oracle WebLogic Application Server
- Configuring Supporting Software
The last document provides information how to configure the DB for your installation.
Hope this helps.
Cheers,
Rodney -
Can any one help me in this code
Hi all,
I have created a selection screen and my aim is to display some fields or some block dynamically by choosing some radio button is it possible.
can any one help me in this.
REPORT z_g_test.
TABLES: spfli,sbook,sscrfields.
SELECTION-SCREEN BEGIN OF BLOCK 1 WITH FRAME TITLE text-001.
SELECT-OPTIONS:s_carrid FOR spfli-carrid.
SELECTION-SCREEN END OF BLOCK 1.
PARAMETERS:rad1 RADIOBUTTON GROUP g1 USER-COMMAND us1,
rad2 RADIOBUTTON GROUP g1 DEFAULT 'X' .
SELECTION-SCREEN BEGIN OF SCREEN 001 as subscreen ."WITH FRAME TITLE text-002.
SELECT-OPTIONS: s_fldate FOR sbook-fldate.
SELECTION-SCREEN END OF SCREEN 001.
DATA ok_code LIKE sy-ucomm.
INITIALIZATION.
START-OF-SELECTION.
SELECT * FROM spfli WHERE carrid IN s_carrid.
ENDSELECT.
END-OF-SELECTION.
WRITE:spfli-carrid.
AT SELECTION-SCREEN.
CASE sscrfields-ucomm.
WHEN'US1'.
* call screen 001 starting at 55 40.
ENDCASE.
Is i am going on the right way
Regards,
Lisa.
Message was edited by: Lisa Roy
Message was edited by: Lisa Roy
Message was edited by: Lisa RoyThis is what I meant. Copy this and try as it is and see if it serves your purpose.
REPORT ztest1 .
TABLES: spfli, sscrfields, sbook.
SELECTION-SCREEN BEGIN OF TABBED BLOCK tabb1 FOR 4 LINES.
SELECTION-SCREEN TAB (25) tabs1 USER-COMMAND ucomm1
DEFAULT SCREEN 001.
SELECTION-SCREEN TAB (25) tabs2 USER-COMMAND ucomm2
DEFAULT SCREEN 002.
SELECTION-SCREEN END OF BLOCK tabb1.
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE abc.
PARAMETERS: p_date LIKE sy-datum.
SELECTION-SCREEN END OF BLOCK b1.
SELECTION-SCREEN BEGIN OF SCREEN 001 AS SUBSCREEN .
SELECT-OPTIONS: s_fldate FOR sbook-fldate.
SELECTION-SCREEN END OF SCREEN 001.
SELECTION-SCREEN BEGIN OF SCREEN 002 AS SUBSCREEN .
SELECT-OPTIONS:s_carrid FOR spfli-carrid.
SELECTION-SCREEN END OF SCREEN 002.
INITIALIZATION.
tabs1 = 'Search by flight date'.
tabs2 = 'Search by flight number'.
abc = 'Some other parameters'.
AT SELECTION-SCREEN OUTPUT.
CASE sscrfields-ucomm.
WHEN 'UCOMM1'.
tabb1-prog = sy-repid.
tabb1-dynnr = 001.
tabb1-activetab = 'TABS1'.
WHEN 'UCOMM2'.
tabb1-prog = sy-repid.
tabb1-dynnr = 002.
tabb1-activetab = 'TABS2'.
ENDCASE. -
Hello guys..!! I have got my new iphone 4 2 days ago.The same day it got a problem of auto restart in every 1, to 2 minutes. I updated and restored it many times...but of no use... can any one help me how to solve this problem..!!
Go to Settings/General/Reset - Erase all content and settings. the connecto to iTunes and restore as a New phone. Do not restore any backup. If the problem persists you have a hardware problem. Take it to Apple for exchange.
This assumes that the phone is not hacked or jailbroken. If it is you will have to go elsewhere on the internet for help. -
I am not able to register my Apple ID for iCloud and the error is "the maximum no of free accounts have been activated on this phone" can any one help me why I need to do
Sir, your Apple ID can be used as an iCloud account as well. They are both the same thing.
You can learn more from --> Set up your Apple ID for iCloud and iTunes - Apple Support -
Hi i am unable to send mail from yahoo mail id.can any one help on this?
import javax.mail.*;
import javax.mail.internet.*;
import javax.activation.*;
import java.io.*;
import java.util.Properties;
public class MailClient
public void sendMail(String mailServer, String from, String to,
String subject, String messageBody,
String[] attachments) throws
MessagingException, AddressException
// Setup mail server
Properties props = System.getProperties();
props.put("mail.smtp.host", mailServer);
// Get a mail session
Session session = Session.getDefaultInstance(props, null);
// Define a new mail message
Message message = new MimeMessage(session);
message.setFrom(new InternetAddress(from));
message.addRecipient(Message.RecipientType.TO, new InternetAddress(to));
message.setSubject(subject);
// Create a message part to represent the body text
BodyPart messageBodyPart = new MimeBodyPart();
messageBodyPart.setText(messageBody);
//use a MimeMultipart as we need to handle the file attachments
Multipart multipart = new MimeMultipart();
//add the message body to the mime message
multipart.addBodyPart(messageBodyPart);
// add any file attachments to the message
addAtachments(attachments, multipart);
// Put all message parts in the message
message.setContent(multipart);
// Send the message
Transport.send(message);
protected void addAtachments(String[] attachments, Multipart multipart)
throws MessagingException, AddressException
for(int i = 0; i<= attachments.length -1; i++)
String filename = attachments;
MimeBodyPart attachmentBodyPart = new MimeBodyPart();
//use a JAF FileDataSource as it does MIME type detection
DataSource source = new FileDataSource(filename);
attachmentBodyPart.setDataHandler(new DataHandler(source));
//assume that the filename you want to send is the same as the
//actual file name - could alter this to remove the file path
attachmentBodyPart.setFileName(filename);
//add the attachment
multipart.addBodyPart(attachmentBodyPart);
public static void main(String[] args)
try
MailClient client = new MailClient();
String server="pop3.yahoo.com";
String from="[email protected]";
String to = "[email protected]";
String subject="Test";
String message="Testing";
String[] filenames = {"c:\\gopi.txt"};
client.sendMail(server,from,to,subject,message,filenames);
catch(Exception e)
e.printStackTrace(System.out);
while compliling this one its compiled succesfully but i am getting exception at run time like..D:\mail>java MailClient
Exception in thread "main" java.lang.NoClassDefFoundError: com/sun/activation/re
gistries/MailcapFile
at javax.activation.MailcapCommandMap.loadFile(MailcapCommandMap.java:275)
at javax.activation.MailcapCommandMap.<init>(MailcapCommandMap.java:128)
at javax.activation.CommandMap.getDefaultCommandMap(CommandMap.java:44)
at javax.activation.DataHandler.getCommandMap(DataHandler.java:136)
at javax.activation.DataHandler.getDataContentHandler(DataHandler.java:568)
at javax.activation.DataHandler.getContent(DataHandler.java:501)
at javax.mail.internet.MimeBodyPart.updateHeaders(MimeBodyPart.java:1253)
at javax.mail.internet.MimeMessage.updateHeaders(MimeMessage.java:2012)
at javax.mail.internet.MimeMessage.saveChanges(MimeMessage.java:1980)
at javax.mail.Transport.send(Transport.java:97)
at MailClient.sendMail(MailClient.java:35)
at MailClient.main(MailClient.java:72)
can any one help on this....plz
thanks in advance
Edited by: Konapalli.Gopi on May 20, 2010 5:42 PMSomething's wrong with your CLASSPATH.
If you're not using JDK 6, you need to include activation.jar in your CLASSPATH.
If you've got any other jar files that define the javax.mail.* or javax.activation.* classes
in your CLASSPATH (such as javaee.jar or j2ee.jar), remove them. -
Have just down loaded Yosemite over Mountain Lion, Indesign CS5 does not work ( Am dependant on it) although Bridge , Light Room and Elements operate OK How do I solve this rapidly. Can any one help on this issue. Thanks
Sorry to say it, but I think you can see from Bob's response that there's no way to solve this rapidly.
Did you take an image of your Mountain Lion install before upgrading to Yosemite? Roll back to that. If you're not in the habit of taking a snapshot of your system before performing operating system upgrades - get in that habit. If you are dependent on anything at all on hour computer, having a reliable backup method in place is essential. If you don't have a Time Capsule, or some other way to run Time Machine onto a disk that's not in your computer, go set that up yesterday.
If you can't just remove Yosemite and roll back to Mountain Lion for whatever reason, you can partition your drive so that you can install both Yosemite and Mountain Lion on the same drive, and then boot into Mountain Lion when you need to work in CS5. Or you can take your Mountain Lion disc (I assume you have one, no?) and then use it to create a virtual machine in something like VirtualBox to run Mountain Lion from inside Yosemite. -
My Iphone 4s reciever is not working properly, when i call someone from my iphone 4s. can any one help me how to solve this problem?
You might like to define "not working properly".
-
as title can any one help me thank you
Error 1604
This error is often related to USB timing. Try changing USB ports, using a different dock connector to USB cable, and other available USB troubleshooting steps (troubleshooting USB connections. If you are using a dock, bypass it and connect directly to the white Apple USB dock connector cable. If the issue persists on a known-good computer, the device may need service.
If the issue is not resolved by USB isolation troubleshooting, and another computer is not available, try these steps to resolve the issue:
Connect the device to iTunes, confirm that the device is in Recovery Mode. If it's not in Recovery Mode, put it into Recovery Mode.
Restore and wait for the error.
When prompted, click OK.
Close and reopen iTunes while the device remains connected.
The device should now be recognized in Recovery Mode again.
Try to restore again.
If the steps above do not resolve the issue, try restoring using a known-good USB cable, computer, and network connection.
Maybe you are looking for
-
I am Not Getting a Additional Tab in ZMIGO in Display mode
Dear Gurus , I have Impelemented a Migo Badi and Created a Additional Tab in MIGO . The Additional Tab is getting Displayed in Create Mode but the same is not getting in Dispay Mode . Can Any Body help me for the same .
-
My Iphone 5 won't show up in itunes on my computer? Any idea on how to fix this problem?
My Iphone 5 won't show up in itunes when i plug it into my windows 8 laptop but it shows up on my computer under devices and drivers as an iphone. Any idea on how to fix this problem so I can use my phone in itunes?
-
Java chat issues in Safari & Firefox
Hello everyone, I've been a Mac person for a long time, and my whole life runs through an apple product of some kind, and while I was an apple sales rep for awhile, I'm not the most tech guy on the back end. Here's what's happened. I convinced my mot
-
Connection error in JDBC Adapter
Hi All, I am using PI 7.1 and created a JDBC Receiver Comm. Channel. When I try to create an External Definition in ESR using the mentioned JDBC Channel, I get the following error: Serialized cause: com.sap.aii.mapping.lookup.LookupException: Connect
-
Print Services : How to Print to a (Postscript) File ???
Hi Forum, for quite a while I'm thinking about migrating our print server to Mac OS X Server, unfortunately I could not find a way to easily create and manage multiple "Pritn-to-File" queues. More precisely: what I would need is the ability to create