Can anybody tell me that "is it possible to clean install os x 10.5 or 10.6 on a mac running 10.4.11"

can anybody tell me that "is it possible to clean install os x 10.5 or 10.6 on a mac running 10.4.11"

Hello Abdul,
Yes it is, assuming your Mac can handle eother one, and you have the Retail Install Disc(s).
Leopard requirements/10.5.x...
    * Mac computer with an Intel, PowerPC G5, or PowerPC G4 (867MHz or faster) processor
minimum system requirements
    * 512MB of memory (I say 1.5GB for PPC at least, 2-3GB minimum for IntelMacs)
    * DVD drive for installation
    * 9GB of available disk space (I say 30GB at least)
You have to call Apple & likely ask for a Product Specialist to get it, if they still have it! Helps to tell them you have an iPad/iPhone & you can't run 10.6.
There are workarounds if the 867MHz is the only hangup...
http://sourceforge.net/projects/leopardassist/
Snow Leopard/10.6.x Requirements...
General requirements
   * Mac computer with an Intel processor
    * 1GB of memory (I say 2GB at least)
    * 5GB of available disk space (I say 30GB at least)
    * DVD drive for installation
    * Some features require a compatible Internet service provider; fees may apply.
    * Some features require Apple’s MobileMe service; fees and terms apply.
Which apps work with Mac OS X 10.6?...
http://snowleopard.wikidot.com/
It looks like they might still have it...
http://store.apple.com/us/product/MC573Z/A?fnode=MTY1NDAzOA
So we know more about it...
At the Apple Icon at top left>About this Mac, then click on More Info, then click on Hardware> and report this upto but not including the Serial#...
Hardware Overview:
Model Name: eMac
Model Identifier: PowerMac6,4
Processor Name: PowerPC G4 (1.2)
Processor Speed: 1.42 GHz
Number Of CPUs: 1
L2 Cache (per CPU): 512 KB
Memory: 2 GB
Bus Speed: 167 MHz
Boot ROM Version: 4.9.2f1

Similar Messages

Can anybody tell me the probme?

In fnd_log_messages i get error as follows:
per.plsql.hr_dflex_utility.ins_or_upd_descflex_attribs.30
per.plsql.hr_dflex_utility.ins_or_upd_descflex_attribs.40
per.plsql.hr_dflex_utility.ins_or_upd_descflex_attribs.40
per.plsql.--====== FLEX VALUES =====--.69
per.plsql.Error segment:7.970
per.plsql.1...NULL VALUE.980
i know this is occur by
if FND_FLEX_DESCVAL.validate_desccols
(appl_short_name     => p_appl_short_name
,desc_flex_name     => p_descflex_name
--5132936 start here
,validation_date=>l_effective_date
     --5132936 ends here
,VALUES_OR_IDS     => 'I'
then
-- AOL DF validation succeeds - do nothing
hr_utility.set_location(l_proc, 50);
-- Bug fix 1218702.Debug check added to improve performance.
if g_debug then
     FOR i IN 1..20 loop
     hr_utility.set_location(substr(to_char(i)||'...'
     ||nvl(FND_FLEX_DESCVAL.segment_column_name(i),'NULL VALUE'),1,70),980);
END LOOP;
end if;
else
-- Bug fix 1218702.Debug check added to improve performance.
if g_debug then
hr_utility.set_location(substr('--====== FLEX VALUES =====--',1,70),69);
hr_utility.set_location(substr('Error segment:'
||nvl(to_char(fnd_flex_descval.error_segment),'CONTEXT'),1,70),970);
FOR i IN 1..20 loop
hr_utility.set_location(substr(to_char(i)||'...'
||nvl(FND_FLEX_DESCVAL.segment_column_name(i),'NULL VALUE'),1,70),980);
END LOOP;
end if;
can anybody tell me that segment7 is wrong setup or what 's wrong?

Ming,
tell us what is navigaiton, what you are looking to find.
Where you are using segment7, which DFF you are using?
Thanks

When i try to start itunes i get a message saying that the MSVCR80.dll file is missing and to reinstall itunes. When I try to reinstall itunes it tells me that I have an Error 7 (windows error 126). Can anybody tell me what this means? Thanks

When i try to start itunes i get a message saying that the MSVCR80.dll file is missing and to reinstall itunes. When I try to reinstall itunes it tells me that I have an Error 7 (windows error 126). Can anybody tell me what this means? Thanks

Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall move on to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2

I am purchasing a apple iphone 4 16 gb - model no. MC318LL, version 5.1.1 (9B206) CAN ANYBODY TELL THAT HOW OLD THE PHONE IS AND WHERE TO CHECK THAT IF I AM PURCHASING A RIGHT MODEL. SPECIFICATIONS CHECK ALSO REQUIRED

I am purchasing a apple iphone 4 16 gb from a local second hand seller - model no. MC318LL, version 5.1.1 (9B206) CAN ANYBODY TELL THAT HOW OLD THE PHONE IS AND WHERE TO CHECK THAT IF I AM PURCHASING A RIGHT MODEL. SPECIFICATIONS CHECK ALSO REQUIRED - its looks are like a new phone.

http://www.gazelle.com/how-to/iphone/model-identification
Turn off your Caps Lock - all caps is considered shouting and rude.
Many will not read your post if suject/body is in caps.

I just started my creative cloud subscription and in AI i am trying to convert text to outlines but that command in type is not active!! can anybody tell me why? and what shall I do to activate it? i am using AI in windows 8

I just started my creative cloud subscription and in AI i am trying to convert text to outlines but that command in type is not active!! can anybody tell me why? and what shall I do to activate it? i am using AI in windows 8

Maybe look at this thread:
Create Outlines greyed out when using a certain font

Can anybody tell me where the export current frame option is in the new final cut update? It used to be under the share menu but that menu has now been removed.

Can anybody tell me where the export current frame option is in the new final cut update? It used to be under the share menu but that menu has been removed now.

When I click File> Share> There is no save current frame option. Also Cmd E isn't working either.

HT201317 Can anyone tell me if it's possible to retrieve photos from my iphone4 that has been taken more than 30 days ago on to my pc?

Can anyone tell me if it's possible to retrieve photos from my iPhone 4 that I took more than 30 days ago on to my pc?

I had issues in 10.4.7 as well as 10.4.8.
My problems occurred at the beginning of 10.4.8, then many users brought light to me using WEP, which was not working that great. I changed my connections to WPA2 and my problem has disappeared. If my problem didn't resolve the way it did, I would have mentioned it the next time I visited an apple store.
The bottom line is that assumptions, complaining, and self diagnostics don't get many people very far and bringing the problem to apple helps them know the incidence of this problem, and helps them develop a reliable solution.
Though some users have reported the "cold shoulder" when reporting Airport problems to apple... I hope you weren't one of them.

When U2 launched their latest album it was downloaded to all iTunes users free of charge. It does not seem to be possible to delete any or all of these tracks. Can anybody tell me how to delete these tracks?

When U2 launched their latest album it was downloaded to all iTunes users free of charge. It does not seem to be possible to delete any or all of these tracks. Can anybody tell me how to delete these tracks?

Hi SJHocking,
Welcome to the Apple Support Communities!
If you would like to remove the iTunes gift album “Songs of Innocence”, please follow the instructions outlined in the attached article.
Remove iTunes gift album "Songs of Innocence" from your iTunes music library and purchases - Apple Support
Cheers,
Joe

MBA hardware test error code: 4MEM/1/40000000:0x79flae98. Can anybody tell me what this means and how to fix the problem if ever possible? Thanks!

As mentioned in the subject line: my Mid 2009 MBA freezes frequently. The hardware test provides the error code.
It sounds like a failed RAM but it still works when booted.
Can anybody tell me what was wrong with this MBA and what else can I do to save it?
Thanks!

Welcome to the Apple Support Communities
That's a RAM issue. If you want, you can still use your Mac until it gets damaged, but that message tells something bad with your RAM, and what it's worse, the RAM in the MacBook Air is soldered onto the logic board, so if you take the Mac to an Apple Store or reseller to get it repaired, the whole logic board will have to be replaced, making this repair so expensive

Recently i noticed that the sound is not comming from my i phone 4s so i needed to restore it as it was earlier. So i decided to do it by restoring it without itunes. Now it is taking too long to restore it. Can anybody Tell me what problem i am facing???

recently i noticed that the sound is not comming from my i phone 4s so i needed to restore it as it was earlier. So i decided to do it by restoring it without itunes. Now it is taking too long to restore it, it is still going on since 3 hours . Can anybody Tell me what problem i am facing???

Which software did you use to restore it, if you didn't go with iTunes?

I am trying to connect to my friend's wifi, i have a very strong signal indicated on my ipad, but cannot connect to the internet. Yesterday i connected without any problem, can anybody tell me why i cannot connect today?

i am trying to connect to my friend's wifi, i have a very strong signal indicated on my ipad, but cannot connect to the internet. Yesterday i connected without any problem, can anybody tell me why i cannot connect today?

Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
    •    Launch Settings app
    •    Tap on Wi-Fi
    •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
    •    In the window that opens, tap on the Renew Lease button
6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
~~~~~~~~~~~~~~~~~~~~~~~~~
iOS 6 Wifi Problems/Fixes
Wi-Fi Fix for iOS 6
https://discussions.apple.com/thread/4823738?tstart=240
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
How to Boost Your Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.h tm
Troubleshooting a Weak Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Sig nal.htm
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
Wi-Fi or Bluetooth settings grayed out or dim
http://support.apple.com/kb/TS1559
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

Hi can someone tell me if it is possible to have two accounts (from different countries) in the same laptop?

Hi can someone tell me if it is possible to have two accounts (from different countries) in the same laptop?

Hi...
The issue is that your credit or debit card credentials must be associated with the same country where you reside to make purchases.
"Although you can browse the iTunes Store in any country without being signed in, you can only purchase content from the iTunes Store for your own country. This is enforced via the billing address associated with your credit card or other payment method that you use with the iTunes Store, rather than your actual geographic location."
From here > The Complete Guide to Using the iTunes Store | iLounge Article
Billing policy is the same for both the iTunes as well as Mac App Stores.

Can anybody tell me how to extract sales value and cost value for an materi

dear all,
Can anybody tell me how to extract sales value and cost value for an material sold .
All the values of cost value and sale values are getting stored in bseg-wrbtr field .
How to identify them uniquely.
Or there is another way to find the sale and cost values.
Regards
Mave

Hi Mave!
Normally there is no condition change, when something is sold.
But sales price depends on sales conditions (not only price, but also surcharges, discounts, taxes - if customized).
Nevertheless, after selling you have a invoice document, where correct values <i>should</i> be stored (see VBRP fields mentioned above). If here is a problem, then customizing of price determination is in question, not a programming of user-exits with MARD selection for costs (or some other tries to get a price).
When you specify your requirements more in detail, you might get better answers - but currently only general hints are possible ('see in invioce / G/L accounts').
Regards,
Christian

Can anybody tell me how many text elements are there in sap scripts?

hi all,
can anybody tell me how many text elements are there in sap scripts?

Hi,
Do you mean that you want to know how many Text-elements are there in a specific Script or you want to know how many max Text-Elements a script can have?
I believe there is no limit on this......
To know all the Text Elements in a Script......goto SE71....press F4 Help on Script Name....Choose Last option for Custom developed Scripts.....and you can open the complete Script details & Code in a Line Editor...After that you can serach/look for the text elements

I'm new to itunes and need some help. Can anyone tell me if it is possible to download an album which has explicit content without actually downloading the explicit songs?

I'm new to itunes and need some help. Can anyone tell me if it is possible to download an album which has explicit songs without actually downloading the songs that are explicit?

See if there's a non-explicit version and download that? Just download the individual songs you want, and not the others?
Honestly, your phrasing doesn't make sense. You're asking how to download an album without downloading its tracks?

Can anybody tell me that "is it possible to clean install os x 10.5 or 10.6 on a mac running 10.4.11"

Similar Messages

Maybe you are looking for