Can anyone show me an example of multiple clients(RMI)?
Hi.
Can anyone show me one simple example of a server serving multiple clients using RMI?
I know that I have to use thread but I'm not really use to it...
Thank you :)
You don't have to use threads, you don't have to do anything. Any RMI server will service multiple clients simultaneously.
Similar Messages
-
Hi. Please can anyone show me how to install a flash document / movie into a powerpoint presentation so that the animation plays within the powerpoint? Thanks
wouldn't it make more sense that a flashtard is someone who
just generally sucks at flash and asks idiotic questions?
anyway, so i pretty much got the banner done - but i'm stuck
on one problem. I made a motion clip of a heart, and i want the
heart to fall from top to bottom, following a squiggly motion
guide, and to rotate 1/4 turn on the way. I got it as far as
following the motion guide, but when i try to select the instance
in the first frame and rotate it, shouldn't the motion tween make
it appear to slowly rotate, rather than stay put then rotate 1/4
turn at the last frame? When I select the clip and play around with
alpha and stuff, that works fine. What the heck? -
Can anyone give me an example for crm_svy_..._pai?
Hi all, I have a survey, there are several questions. After I input the answers, I click the 'CHECK' button, I will check the answers. There will be different response to my answers. If the answer is not correct, I will post an error message.
And I also need to retrieve data from tables to fill the blank.
I am a beginner for CRM survey, can anyone help me? I create a FM:crm_svy_..._pai, and code in it right? But how can I do it?
Can anyone give me an example for crm_svy_..._pai to do what I need?
Many many thanks in advance!!
Heare is an example, but I don't its function and how does it work..
read table lt_all_values into ls_value
with key answer_id = 'get_value'.
if sy-subrc = 0.
data: lt_values type crm_svy_api_string_t.
append ls_value-value to lt_values.
call method ir_survey_values->values_set
exporting
i_question_id = 'set_value'
i_answer_id = 'set_value'
it_values = lt_values.
endif.Hi Yu,
Could you tell how you solved your issue?
Regards and tx in advance,
Mon -
I'm trying to get a better idea what "Helper methods" do but cannot find any good examples, can anyone please find me examples of these method.
Also how do I print methods between different classes in a program??
many thanksAlso how do I print methods between differentclasses
in a program??This question makes no sense to me.I've got some classes that need to print methods from
an input/output class, what code is needed for
this????You want to print methods? You might use Reflection for this. An Input/Output class? What is that? You want to print method signatures from a class that handles IO? Why should it matter what the class does?
I've no idea what code might be needed to do whatever it is you are wanting to do here - please clarify and see if we can get a more useful answer. -
Can anyone provide me the examples of OC4j basic authentication
Can anyone provide me the examples or links of OC4j basic authentication?
Thanks in advanceCan anyone provide me the examples or links of OC4j basic authentication?
Thanks in advance -
Can anyone give me an example of direct, queued and unserialized delta?
hi all,
Can anyone give me an example of direct, queued and unserialized delta for fi and sd applications.
thanxs in advance
regds
harihi,
Update Methods,
a.1: (Serialized) V3 Update
b. Direct Delta
c. Queued Delta
d. Un-serialized V3 Update
Note: Before PI Release 2002.1 the only update method available was V3 Update. As of PI 2002.1 three new update methods are available because the V3 update could lead to inconsistencies under certain circumstances. As of PI 2003.1 the old V3 update will not be supported anymore.
a. Update methods: (serialized) V3
Transaction data is collected in the R/3 update tables
Data in the update tables is transferred through a periodic update process to BW Delta queue
Delta loads from BW retrieve the data from this BW Delta queue
Transaction postings lead to:
1. Records in transaction tables and in update tables
2. A periodically scheduled job transfers these postings into the BW delta queue
3. This BW Delta queue is read when a delta load is executed.
Issues:
Even though it says serialized , Correct sequence of extraction data cannot be guaranteed
V2 Update errors can lead to V3 updates never to be processed
Update methods: direct delta
Each document posting is directly transferred into the BW delta queue
Each document posting with delta extraction leads to exactly one LUW in the respective BW delta queues
Transaction postings lead to:
1. Records in transaction tables and in update tables
2. A periodically scheduled job transfers these postings into the BW delta queue
3. This BW Delta queue is read when a delta load is executed.
Pros:
Extraction is independent of V2 update
Less monitoring overhead of update data or extraction queue
Cons:
Not suitable for environments with high number of document changes
Setup and delta initialization have to be executed successfully before document postings are resumed
V1 is more heavily burdened
Update methods: queued delta
Extraction data is collected for the affected application in an extraction queue
Collective run as usual for transferring data into the BW delta queue
Transaction postings lead to:
1. Records in transaction tables and in extraction queue
2. A periodically scheduled job transfers these postings into the BW delta queue
3. This BW Delta queue is read when a delta load is executed.
Pros:
Extraction is independent of V2 update
Suitable for environments with high number of document changes
Writing to extraction queue is within V1-update: this ensures correct serialization
Downtime is reduced to running the setup
Cons:
V1 is more heavily burdened compared to V3
Administrative overhead of extraction queue
Update methods: Un-serialized V3
Extraction data for written as before into the update tables with a V3 update module
V3 collective run transfers the data to BW Delta queue
In contrast to serialized V3, the data in the updating collective run is without regard to sequence from the update tables
Transaction postings lead to:
1. Records in transaction tables and in update tables
2. A periodically scheduled job transfers these postings into the BW delta queue
3.This BW Delta queue is read when a delta load is executed.
Issues:
Only suitable for data target design for which correct sequence of changes is not important e.g. Material Movements
V2 update has to be successful
hope it helps
partha -
Can anyone give me an example?
I want to lucubrate M-UI ,CAN anyone give me an example just for my beginning?
What is "lucubrate M-UI ,CAN"???
CUL8er,
Nick. -
Can anyone send me TCS XI running projects clients ?
can anyone send me TCS XI running projects clients?
please send ASAP..HI Bipin and Prasad,
Please note TBIT40 materials are copyright protected by SAP AG. Distruibution of any such material is ILLEGAL.
If you need the training material, attend a training course in any SAP authorised training centre.
Regards,
Jai Shankar -
Patch editor in Environment - can anyone post a recent example?
Greetings,
I want to create an editor for my Alesis Micron by editing an existing example if possible. Everything I've found on the net is pre-Logic 7 and my L8 will not open them . . . can anyone help?
(I'll post it for anyone interested when I'm done . . .)
Cheers.An existing example is basically almost completely useless to you as every device has a different feature set, and a different way of accessing parameters.
Look in your manual at how to get access to your synth parameters. if it uses sysex, it should have the sysex spec documented at the back of the manual. if it uses controllers instead, then it should have the controller numbers documented.
Then simply create a new fader, and start with the first parameter you want to control, say filter cutoff. Make the fader output the correct MIDI data to change that parameter in the synth. And work your way through your parameters, adding faders, switches, knobs etc and presenting them how you want. -
As the title says, can anyone recommend any simple displacementmapfilter examples?
I have a bitmap image of a sleeping animal that I would like to add a small effect to that will make it look like it is breathing. I'm guessing this should be pretty simple with displacementmapfilter - a spherical distortion tweened over time over the animal's chest.
Any suggestions?i don't think there's anything simple about the displacementmapfilter. i've tried to explain it before but i've never had the feeling that i was able to convey understanding.
here's the displacementmapfilter at work: www.kglad.com, click snippets, click displacement.
here's the source code: www.kglad.com/Files/forums/displacementMapFilter_AS3.fla
p.s. there's commented-out code in there that used a squeeze and bulge function during my early experiments that could probably be used by you. -
Can you show me an example about %=navop%
Hi all,
On the <jbo:RowsetNavigate I found this:
Tip: You can also set the action parameter at runtime by using an expression such as
<%=navop%>. You would pass the action value to the RowsetNavigate tag from another portion of your page.
I guess this is used in conjunction with <jbo:OnEvent list=first,next, ..... > in order to not repeating code and reuse the same portion of code in navigating actions.
Can you show me how can I get the value <%=navop %> in order to pass it to the tags (i.e. <jbo:ROW action=<%=navop%>), in the submiting form?
Thanks.this is just a local variable to the JSP page you can pass it as a request parameter and retrieve it as follows:
<%
String navop = request.getParameter("navigation"); // this is your variable name
%> -
Can anyone show me how to create a scheduled app to run
hi
i have a application that needs to be run at certain time daily. i was wondering if anyone here can show me how to do that? thanksthanks, i have never used either to run java app. however i had used window's schedule task to run other window programs before. is there any sample to use both to run java prgram? thanks
-
Can anyone give me an example of a custom TableColumn
I just can't get to grips with creating a custom TableColumn
can somone give me a hand or a pointer to a tutorial, I just cant find one anywhere
ThanksFrom that thread's description, I think everything you are asking to do can be controlled by the TableModel itself. The data, types, etc. (that are the data that drive the table) are all defined in your table model.
Just subclass AbstractTableModel and implement the necessary methods. If while running, you change the # of columns, data types, etc. just fire the appropriate event from your TableModel fireTableStructureChanged(), etc. The columns, etc. will be rebuilt using the updated information from your table model. Not sure given your description if you will need to do any of that though. I think you can just extend the abstract table and with your own logic in getValueAt() to return the appropriate value from your data.
Note that the table expects all of the data in a column to be the same type. If your underlying data may have values in different types (classes) you will need to convert them to something generic before returning them from your model (like as a String).
Read up on this tutorial:
http://java.sun.com/docs/books/tutorial/uiswing/components/table.html
You pretty much don't have to muck with the TableColumnModel stuff unless you want to do advanced/tricky things like provide a generic way to hide/show columns, etc. -
Can anyone give me an example of for all entries in case of inner join
Hi abapers,
I am trying to replace an inner join with for all entries.
So kindly give me a demo code so that i can understand the use and apply it.
And plz tell me in which case it is better to use for all entries and in which case to use inner join so that better performance will occur.
With Regards
AnsumanHello Ansuman,
For example:
DATA:
BEGIN OF fs_eket,
ebeln LIKE ekko-ebeln, " Purchasing Document Number
ebelp LIKE ekpo-ebelp, " Item Number of Purchasing Doc
END OF fs_eket. " fs_eket
DATA:
t_eket LIKE " Purchase table
STANDARD TABLE
OF fs_eket.
Using joins:
select ebeln ebelp
into corresponding fields of table t_eket
from ekko join ekpo
on ekkoebeln eq ekpoebeln
where ebeln in s_sbeln.
The select statement can be replaced by
SELECT ebeln
FROM ekko
INTO CORRESPONDING FIELDS OF TABLE t_eket
WHERE ebeln IN s_ebeln.
IF sy-subrc EQ 0.
sort t_eket by ebeln.
SELECT ebeln
ebelp
FROM ekpo
INTO CORRESPONDING FIELDS OF TABLE t_eket
FOR ALL ENTRIES IN t_eket
WHERE ebeln EQ t_eket-ebeln.
The duplicate entries are removed by using FOR ALL ENTRIES. Or else by using the join, you have teh sort the table by key fields and then delete adjacent duplicates.
Hope it helps you
Regards
Indu -
Can anyone solve it by example
sir
***folder1 contain folder2****
***folder2 contains class files and abc.jar***
i make a jar file name abc.jar which contain a folder named images.
images have one property file i read to try it but still fail
so the path is
abc.jar\images\user.properties
i use the following code
try{
URL u1=null;
Properties prop=new Properties();
u1=getClass().getResource("/images/user.properties");
prop.load(new FileInputStream(u1.toString()));
}catch(Exception ex){System.out.println(ex.getMessage());}but exception is occur
that filename,directory name,volum label is not correct
i also set the class path variable in win 2000 as
classpath=e:\folder1\folder2\abc.jar;
plz guide me i already test the "/" instead of "\"
what can i do this job.
when i print the u1 it appers
jar:file:/e:/folder1/folder2/abc.jar!/images/user.properties
plz guide me that how i make jar file and access it with exampleHi Bas Jansen,
thank you for ur reply
The Paper size was correct and still blank page was comming,if u know anything plz reply me
iam waiting for ur reply
Regards
Raja Sekhar.T
Maybe you are looking for
-
How to create a column based on a condition ?
Hi all, I am trying to create a stored procedure that will return ID,Name and a column of type bit called called checked based on a condition please review my code and tell me what is wrong with it ALTER PROCEDURE [dbo].[SelectStoresNames] AS BEGI
-
How to create purchase order using SharePoint Custom List
Hi All, Can you please provide some example or link to create Purchase Order using SharePoint List / SharePoint Designer. Thanks
-
ITunes "unexpected quit" when ipod plugged in?
Hello! I've never had this problem before. I apologize if this topic seems similar to others, but I noticed there were a few differences in problems. Whenever I plug in my ipod (version 1.2 of the photo ipod) to my ibook, iTunes (4.8) will crash (i.e
-
Wpg_docload from inside apex
- I would like to use the below procedure to download an image in a new browser window. - I created a public dad - I created the following package/procedure: create or replace package body jmf as procedure download is v_bfile bfile; begin select bfil
-
Error in shiping/picking invoice
hi all, after creating new organization , I am facing this problem. WSHPSGL module: Pick Selection List Generation Current system time is 31-JUL-2012 17:23:55 **Starts**31-JUL-2012 17:23:55 **Ends**31-JUL-2012 17:23:55 Exception occurred in WSH_PICK_