Can Applet call IE program using JDK1.3?

Hi,
I am developing a program using jdk1.3
At present, I need my applet to call IE to open an internet address.
How can I do that?
Thanks.

Thanks.
But, the html is opened in the same windown as the former one. I need to open a new IE window, and call the webpage, is there a way to achieve this?

Similar Messages

Can applet call IE?...

Can applet call explorer?...
That means if i have a applet class which show some details, then i wanna create the html page by using that details from applet and then execute it.
Is it impossible to do that?
As i known, there is Runtime class that can execute the program by using "Runtime.exec()" method, but we have to put the file's path(path that tell where the html file is...) as the parameter.
But my problem is i did not prepare the html file before, it will be create on applet , and then exceute it to show on monitor...
Do u have any idea?..
Thank a lot..

Your applet can call javascript, javascript can open a new window and set the
text (html) for this window (document.write window.opener.sometext()).
To call javascript from your applet:
          try {
               this.getAppletContext().showDocument(
                         new URL("javascript: someJSMethod();"));
          } catch (Exception e) {
               e.printStackTrace();
          }

[svn:bz-trunk] 9838: Bug: BLZ-416 - Can bypass checks for which channel and protocol a destination can be called over by using NetConnection instead of BlazeDS messaging .

Revision: 9838
Author:   [email protected]
Date:     2009-08-31 11:27:50 -0700 (Mon, 31 Aug 2009)
Log Message:
Bug: BLZ-416 - Can bypass checks for which channel and protocol a destination can be called over by using NetConnection instead of BlazeDS messaging.
QA: Yes
Doc: Yes - note the new enforce-endpoint-validation setting.
Details: Added the following config setting:
Ticket Links:
    http://bugs.adobe.com/jira/browse/BLZ-416
Modified Paths:
    blazeds/trunk/modules/common/src/flex/messaging/config/ConfigurationConstants.java
    blazeds/trunk/modules/core/src/flex/messaging/MessageBroker.java
    blazeds/trunk/modules/core/src/flex/messaging/config/MessagingConfiguration.java
    blazeds/trunk/modules/core/src/flex/messaging/config/ServerConfigurationParser.java
    blazeds/trunk/modules/core/src/flex/messaging/config/SystemSettings.java

Urgent: Calling ABAP Program using JMS

Hi,
I have a scenario where legacy system pass some messages to ABAP Program and this program can handle one message at a time (written in that way).
Now the receiver communication channel is configured to access J2SE adapter. This J2SE adapter stores the message on R/3 system and triggers the ABAP program located in R/3 system.
Now when multiple messages are coming at a time in SAP-XI and processed successfully and handover to J2SE adapter. But J2SE adapter triggers the ABAP program for all messages. And here is the problem. ABAP program is not supporting multi - threading.
my idea is to use JMS adapter...can you guys suggest me how to achieve result and how to configure JMS or any other adapter to call ABAP Program so that only one message will pass to ABAP program at a time.
Regards,
Gourav Khare

Hi,
First find out where your ABAP program the data written.You need to write it into and spool then only you can see it.
Transaction SP01, you can use the FM 'GET_PRINT_PARAMETERS' in your abap program to write to spool.
Thanks,
Ravi

Can we call a webservice using standalone java application ?

Hi friends,
               Can we call configurd webservice in xi , using standalone java application by just giving url of webservice ?
              OR
              Only by means of WEBDynapro we can call ?
                Can you please tell me the answer for this .
Regards .,
V.Rangarajan

HI Ranga Rajan
well, If at all if you have webservice...you can import that werbserivce as External definition in to IR.
How to import:
1) Go to IR and and move to your requied component and there you can see the option called imported objects...select on imported objects where you can give the name and you can select the webservices which you want to use it.
2) Hope you are aware of that a werbservice will have the request and response.
3) Create the mapping program accroding to your requirement.
Go through blogs of Bhavesh and Naveen which talks about calling webservice in a specific condition:
Webservice Calls From a User Defined Function - /people/bhavesh.kantilal/blog/2006/11/20/webservice-calls-from-a-user-defined-function
Consuming/Calling webservices from DataBases - /people/sap.user72/blog/2005/10/20/consumingcalling-webservices-from-databases
Also check this help file on Web Services:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/336365d3-0401-0010-9884-a651295aeaa9
Cheers..
Vasu
<i>** Reward Points if found useful **</i>

Can i call java program from VC++ code...... Urgent!

hi,
I have VC++ code.
I want to run java program from VC++ (SDK).
Can I call it?
plz help it's urgent....
thanks in advance...

We do it all the time using the JNI invocation API (this is actually how the java.exe application works).
Here's a tutorial I just found (not sure how good it is, but it should get you going):
http://www.inonit.com/cygwin/jni/invocationApi/
One note: If you are going to be invoking the JVM from different threads in your native app, there is some special handling you will have to do - the above tutorial doesn't address this scenario (a dig through the JNI docs should help with that one, though).
Cheers,
- K

Can't remove rooted program using 100% of memory

I had a WD external hard drive that died on me, so I got a new Seagate external, and uninstalled all of the WD software and everything else associated with WD from my computer. I use a program called iStat to monitor various things going on with my computer, and recently, I've noticed that a program called 'WDSmartWareD' is using between 90% and sometimes up to 105% of my computer's processing abilities. When I open my Activity Monitor, it consistently reflects this. WDSmartWareD is a labelled a root process, so even when I highlight it, and quit the process, it comes back within five seconds, and immediataly starts taking over my computer. I went to the Genius Bar, they ran a couple diagnostics that I had already done at home, and they suggested that I re-install my OS. I did that today, and it did not fix the problem. I called WD's customer support, and they provided no help. When I search in Finder for anything associated with WD, nothing comes up, just the above-mentioned WDSmartWare program constantly eating up all of my computer's memory. Can anyone here help me get this off of my computer? Thank you in advance. I tried to explain this as well as I could, but if anyone needs more information, I'll certainly do my best to provide it. Again, thank you for reading, and I am confident that I will receive some helpful information.

I had the same problem. Go into your main library folder by doing the following:
Right click the Finder icon and choose "Go to Folder..."
When the windo pops up, enter: /library/
There should be a folder called "Launch Daemons"
Open that folder and look for any files that have names with smarware or WD or WDC in them (I had 2).
Trash them, and reboot computer...
..Voila
At least it worked for me. Good luck.

Can I call a function using array index?

I've defined an array which stores the function name, like this:
var aresetButtonTop:Array = new Array(resetTop1,resetTop2,resetTop3,resetTop4,resetTop5);
Then I have a button named"btnresetTop" which when clicked will call one of the five functions stored in the above array(aresetButtonTop). The functions are called at run-time depending upon some conditions. I need to figure out how I can call those functions using the array index. I'm using the following code to call the function. The value of i has been already calculated.
btnresetTop.addEventListener(MouseEvent.CLICK, aresetButtonTop[i]);
After doing this I'm getting the following error when I click the button:
TypeError: Error #2007: Parameter listener must be non-null.
    at flash.events::EventDispatcher/addEventListener()
    at gallerytest_fla::MainTimeline/thumbTopClick()
Note: thumbTopClick() is a function inside which all these codes are written.
I need to find out whether it is posible in AS3 to call a function name using the array index or not. If yes, could you pleas ehelp me out.

Thanx Andrei1, you were right, i was out of range.The value of i will obviously expire outside the for loop. Now I have corrected my mistake by assigning the value of i to a variable index inside the for loop and then use the following code:
btnresetTop.addEventListener(MouseEvent.CLICK, aresetButtonTop[index])
It was a silly mistake but I was not able to figure it out for the last 2 hours. Thanks once again for your help

Why can't I uninstall programs using CCleaner?

When I try to uninstall a program using CCleaner I get this message "You do not have privileges to perform this operation". I am the only user on this computer.

With ccleaner in particular or in general?
Very basically and generally you can, at the minimum, trash the application, prefPane, or whatever it is you want to uninstall. But you should be aware of some other details:
1. Apps may install login items or other startup items. Hopefully the ones the install other startup items will also supply their own uninstallers. Use the third party uninstaller whenever possible if it is supplied.
2. Preferences are usually stored in ~/Library/Preferences generally as .plist files. You could, if you can't identify the plist file just leave it alone. If there is no program to use it the plist is just taking up space.
3. Many apps also can create stuff in ~/Library/Application Support. Like the preferences these to could be ignored.
4. Like 2 and 3, some apps might use ~/Documents, ~/Movies, etc.
5. Apps installed with .pkg or .mpkg installers usually will install their apps into /Applications. But except for stupid authors who for some odd reason want to supply their apps with .pkg installers where it only installs a single application, .[m]pkg's will usually "spray" other stuff into your system into any of the places I mentioned previously but also may install into system level places if they request the admin password. Hopefully these installers will also supply some kind of uninstaller, either installed as part of the installation or supplied separately.
Some additional references:
The X lab: Uninstalling applications
Uninstall Mac Applications

I just got my iphone 6 today and I can't call,text,or use data.

I have problems where I can't call, text, and surf though INTERNET. When I turn on internet (YouTube, Facebook and such), it uses my data but it doesn't work. I tried to call customer service MANY TIMES but my phone won't let me call.... I really need to fix this ASAP because I use my phone in various ways. I usually have 'no service' or 'one bar' or 'two bars' but regardless, it doesn't work..... I tried to use Wifi but it also doesn't work.... This is a very serious problem to me. Please Verizon do something!I My old phone "Cosmos 2" worked just fine in same area. I live in MD zip:21532.

Did you check the security software on your computer?
Resolve issues between iTunes and security software - Apple Support
You can also go back to the Apple Store and let them activate the phone.

Compiling programs using jdk1.6.0

when i compiled program using "system.out.print.in " , it shows an error
that package system does not exist .

if you want to print something use
System.out.printor if you want to make it print on seperate lines
System.out.println

How can I call common module using config tools

I have 2.02 version and would like call common module using config tools.

I have 2.02 version and would like call common module using config tools.

How can i install any program using java code

Hi friends,
i want to know how can i install any software using c# code.

Hi,
You may change your title, Since this is C# forum.
>>i want to know how can i install any software
usingc# code
So what kind of your software?
In C#,we can install and uninstall "*.msi" files (setup).
The code to install software without user interface is:
private void installSoftware()
Process p = new Process();
p.StartInfo.FileName = "msiexec.exe";
p.StartInfo.Arguments = "/i \"C:\\Application.msi\"/qn";
p.Start();
For more detailed information, please refer to article
C# - Installing and uninstalling software in codeproject.
Best regards,
Kristin
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

How to pass a value and call SE38 program using SUBMIT statement

Hello Friends
I am trying to write a batch program in SE38, that calls other SE38 Programs.
I don't want to use Parameter command to see the value on screen.
All I want is to send a range of date (ToDate & FromDate) and generate different reports satisfying this date range condition.
Can some one please help me with this. I would really appreciate it.
I have tried the command SUBMIT with options of filling the input fields of the subsequent programs but I don't want to do this.
I want all the sub programs to be called one after another and the reports generated using the date varialbles I send from the main program.
I don't want to use se37 functions because of the client's request.
Any help will be highly appreciated.
Tks
Ram

Yes I am using SUBMIT command but I was not using the right options with the SUBMIT command and once I used the right options, it worked.
Tks
Ram

How can I run other programs using java program

hi experts,
I am trying to execute a set of commands from java program
eg: from command prompt
java CommandExecutor c:\winnt\notepad.exe c:\some.exe c:\onemorecommand.exe
and inside the CommandExecutor main method..
public static void main(String []arg)
for(i = 0; i < arg.length; i++)
Runtime.getRuntime().exec(arg(i));
the above code is executing all the command one after the other, but I want to execute the above commands squentially, i.e I want to execute the second command only after finishing the first command and the third after finishing the second and so on depending upon the arguments passed, how can I acheive this...
I have tried to use the Process which is returned by the exec(arg) method but the exitValue() returns same value before execution and after execution.
thanks,
krishna

Did you try to get the process returned and then try
process.waitFor() method. This waits for the process to finish.
After that try the next execution

Can Applet call IE program using JDK1.3?

Similar Messages

Maybe you are looking for