Can AS1 code call AS3 code?

I was wondering if there was any way for AS1 code to call AS3
code.
I need to write a server extension for SmartFox Pro. I just
found out that the only version of action script that SmartFox
sever extensions can be written in is AS1. However, I have a bunch
of code already written in AS3 that I need to use. I have all of
the source for the AS3 code.
Is there a way for me to use my existing code, or am I out of
luck?
Thanks in advance
John Lawrie

you may be able to use swfbridge to do so, basically
implementing the LocalConnection class
http://www.gskinner.com/blog/archives/2007/07/swfbridge_easie.html

Similar Messages

Unable to run Crystal Report due to error code called "database code:102

I have created a View on the SQL server and Now I am trying to run crystal report using that view. However, I get Database Vendor Code error message 102. Need your help, How can I ran a report using SQL veiws in Crystal?
thanks!
Mansoor

Hi,
The report is getting an error code 102 from the database driver.Try with searching the RDBMs type for error code 102, to narrow down the issue.
If data from database is failed to retrieve then,there are several causes of this error like disconnected tables, tables that are not connected properly.
Run your query in SQLcon32 and check that getting accurate output or not.
Regards,
Shweta

Trying to convert as1 code to as3

Hi,
I have to convert a as1 site to as3.
The only part of the whole thing that i'm not sure of is this:
          on(release){
                    loadvariables ("save.aspx?cmd=addemail&adresse=" add string(adresse.text),this)
                    Object.prototype.alert = function (message) {
                          getURL("javascript:alert('"+message+"')");
               alert("We received your email, thank you.");
               adresse.text="";
It's basically a newsletter subscription box done in as1.
Will the same code work if I only include it in a as3 MouseEvent.CLICK like this:
function btn_click(event:MouseEvent):void {
          loadvariables ("save.aspx?cmd=addemail&adresse=" add string(adresse.text),this)
          Object.prototype.alert = function (message) {
                getURL("javascript:alert('"+message+"')");
     alert("We received your email, thank you.");
     adresse.text="";
Thanks

Thanks Ned for guiding me.
I looked into both (URLLoader / ExternalInterface) and I came up converting the original As1 code:
on(release){
loadvariables ("save.aspx?cmd=addemail&adresse=" add string(Adresse.text),this)
Object.prototype.alert = function (message) {
getURL("javascript:alert('"+message+"')");
alert("We received your email, thank you.");
Adresse.text="";
into this As3 code:
lbl.text = "ExternalInterface.available: " + ExternalInterface.available;
var myLoader:URLLoader;
var myVars:URLVariables;
var Response:String = "We received your email, thank you.";
//////////////////////////////////////////////////////////////////////////////This is my button
button.enabled = ExternalInterface.available;
button.addEventListener(MouseEvent.CLICK, sendEmail);
/////////////////////////////////////////////////////////////////////This is Onclick
function sendEmail(e:MouseEvent):void
    myLoader = new URLLoader();
    myVars = new URLVariables();
    myLoader.dataFormat = URLLoaderDataFormat.VARIABLES;
    myVars.email = Adresse.text; // Text from textfield
    myLoader.data = myVars;
    myLoader.addEventListener(Event.COMPLETE, messageSent, false, 0, true);
    myLoader.load(new URLRequest("save.aspx?cmd=addemail&adresse="+myVars.email));
///////////////////////////////////////////////////////////////This is the response
function messageSent(e:Event):void
    ExternalInterface.call("alert", Response);
    Adresse.text="";
The thing is that I don't have access to the server and aspx file and i'd just like to make sure i'm heading in the right direction so far.

Can someone pls help me to change AS3 code to AS2 code

Hello! Dear All,
I dont understand why with AS3 code my swf file is not working smooth at all. I would like to try it with AS2. In publish setting when I am selecting Flash Player 8, AS2 my swf is running good but showing lots of code errors.
I dont have much knowledge about AS2 so if someone can help me with this...it would be great.
Thanks,
Cheers!
Code1:
import flash.external.ExternalInterface;
ExternalInterface.addCallback("GetVars",GetVars);
ExternalInterface.addCallback("SetVariable1",SetVariable1);
function GetVars():Array {
return [
{VariableName:"SetVariable1",DefaultValue:"Variable1"}
function SetVariable1(variable:String):void {
for (var i:int = 0; i < numChildren; i++) {
var mc:MovieClip=getChildAt(i) as MovieClip;
if (mc!=null&&mc.name=='Audi_Cup') {
   mc.variable1=variable;
   mc.SetVariable1(variable);
Code 2
this.mask_mc.cacheAsBitmap=true;
this.mask_mc.cacheAsBitmap=true;
Text1.mask=(mask_mc);
function SetVariable1(variable:String):void {
if (variable!=null) {
for (var i:int = 0; i < numChildren; i++) {
   var mc:MovieClip=getChildAt(i) as MovieClip;
   if (mc!=null&&mc.name=='Text1') {
    var object:TextField=mc.getChildByName('InputTextField1') as TextField;
    if (object!=null) {
     object.text=variable;
SetVariable1(this.variable1);

it's possible, but unlikely, you'll fix anything by converting to as2. so, what problems are you having with as3?

My phone needs a restore but I can not because my pass code is active. It only allows me to go to the emergency call screen. I can't type in my pass code What should I do?

My phone needs a restore but I can not because my pass code is active. It only allows me to go to the emergency call screen. I can't type in my pass code What should I do?

Thank you so much I actually did have restrictions enabled. Ur too sweet thanks again for your help

Iphone is locked with pass code but still we can make a call using voice control

If our iphone is locked with pass code we can make a call using voice control.
Press and Hold the Home button then you will get the Voice Control Menu.
Choose Dial or Call then you can make call.
Is it IOS Bugs or...

It is a feature.
You can disable it at Settings > General > Passcode > Voice Dial if you wish.

Can you call external code from XE?

Hi,
I have an application that uses external code, called via extproc. During a standard Oracle installation, I need to modify the listener configuration to allow it to do so. This is done by modifying listener.ora like follows:
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = C:\oracle\ora10_2)
(PROGRAM = extproc)
(ENVS = "EXTPROC_DLLS=ANY")
without the 'ENVS' entry, the listener security prohibits the loading of our code.
The touble I have on XE is that attempting to restart the listener after this change gives an error:
TNS-01155: Incorrectly specified SID_LIST_LISTENER parameter in LISTENER.ORA
NL-00303: syntax error in NV string
Does this mean that external code cannot be used? or does anyone know a workaround?
Thanks in advance,
Jim

One obvious problem is the missing close paren, seen when you reformat as follows:
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = C:\oracle\ora10_2)
(PROGRAM = extproc)
(ENVS = "EXTPROC_DLLS=ANY")
) <--- this is missing

Dummy Guide needed for converting AS2 code into AS3

I have to convert my existing AS2 code into AS3, but I might as well be reading chinese. I never even began to learn AS3, it was still fairly new at the time and the class ended before we had an opportunity to even touch on it. My major was not web design, it was the print side of design. I took an additional class, after I graduated, to learn web design and our teacher told us, basically, that we were designers, not coders so we won't be getting much into actionscripting, beyond the basics. At the time I was relieved, but looking back, I really wish we would have gotten more into it. Bottom line, I need to learn now.
Is there ANYONE that can help me out? I will list my code below, buy I am way beyond lost any help that can be provided, I would be so grateful!!!!
On the main timeline I have the basic..
stop(); -- I found the AS3 version, but I don't know what I'm looking at. I get "not_yet_set.stop()" and there are are 8 options I can choose from. I just want the timeline to stop until I tell it where to go next. And what is "not_yet_set"
Then I have my buttons, which are, basically...
on (release) {
gotoAndStop("Home");
Or "gotoAndPlay("Whatever");"
I also have buttons for scrolling...
on (press) {
play();
on (release) {
stop();
AND
on (press) {
_root.AboutMe_Controller.gotoAndPlay(…
on (release) {
_root.AboutMe_Controller.gotoAndStop(…
For the on(release) command, this is what I found as the AS3 version: not_set_yet.dispatchEvent()

because that's really as1 code, you have steeper learning curve than going from as2 to as3.
first, remove all code from objects, assign instance names to your buttons and you can then start on as3:
// so, if you name your home button, home_btn:
home_btn.addEventListener(MouseEvent.CLICK,homeF);
function homeF(e:MouseEvent):void{
gotoAndStop("Home");
p.s. the not_yet_set stuff is there because you tried to use script assist or some other actionscript shortcut.

How to convert this random pos AS2 code to AS3?

Hi! I'm doing a sort of screensaver and need to random the logo all over the screen. In ActionScript 2 it was easy, just paste some code to the object and it works. The things to do this is total different in ActionScript 3 and I can't figure out how to solve this. It would be nice if someone could take a look at my very simple example and point me in the right direction. Maybe there is some example out there done in AS3?
I can't figure out how to post fla so I renamed it to jpg. Just change the extension to fla again...
Regards / Jimmy

SORRY FOR THE LATE RESPONSE I WAS NOT ONLINE FOR THREE DAYS....
I am still not able to download the file.
What you can do is enclose the code which is called directly on the timeline in a function and call that function whenever required.
You can also send the file on my mail ID at [email protected] [Make sure you zip it and the version is saved in CS3]

Creating AS3 code for C++ classes converted with Alchemy (a là Box2D)

So I've a collection of C++ classes which I now have converting fine with Alchemy to a swc file and can call the exposed functions fine from my AS3 code.
What I'd really like to do is recreate stuff like Box2D's b2Vec.as class,
public class b2Vec2 extends b2Base {
    public function b2Vec2(p:int) {
        _ptr = p;
    public function get v2():V2 {
        return new V2(x, y);
    public function set v2(v:V2):void {
        x = v.x;
        y = v.y;
    public function get x():Number { return mem._mrf(_ptr + 0); }
    public function set x(v:Number):void { mem._mwf(_ptr + 0, v); }
    public function get y():Number { return mem._mrf(_ptr + 4); }
    public function set y(v:Number):void { mem._mwf(_ptr + 4, v); }
This is a simple example, but shows what I'd like to do. On the C side of things, b2Vec2 is a struct,
/// A 2D column vector.
struct b2Vec2
    /// Default constructor does nothing (for performance).
    b2Vec2() {}
    float32 x, y;
So, for this struct, it's easy to calculate that the first variable of a b2Vec2 object is a float, which will be the value in x and can be read via Alchemy's MemUser classes _mrf (read a fload from a point in memory) with _mrf(pointerAddress) and you can read in the second float with _mrf(pointerAddress + 4).
My question is, if you're not a C++ expert (me), is there any way to get the definition of a class, as in the addresses of all the variables within and what they are? So, for the b2Vec2 one, I'd imaging it'd be something like, float32 x 0 float34 y 4 ...
The reason I'm asking is because one of the classes in particular has loads of variables and to try and get each and every one's information so I can access it directly from the AS3 code would be lots of work and I'm going to assume I'll introduce plenty of human error to it.

Hi,
I am facing the similar issue. Can you please tell me how you solved this problem in more details?
which sample code and how u can find that in SE24 and where to copy that code.
Thanks in advance..
vamsi.

How can we know the return code of BDC Program ?

Hi All,
Please tell me : How can we know the return code of BDC Program when being exceuted in Session or in Transaction mode.
In my program, we are uploading data from Excel sheet to SAP via BDC
The records that are not updated we want to create a log file.
Now to know whether a record is updated ot not, wat syst field shloud be used?
Its urgent....
<b>Reward Point will be there ....</b>
Thanks,
Harish

Hi harish,
try the logic in this code ...
i had attached input file in the end.
TYPES: begin of errmess,
        msgnr type t100-msgnr,
        text type t100-text,
       end of errmess.
TABLES : t100.
DATA: BEGIN OF DD_VA01,
       AUART TYPE VBAK-AUART,
       KUNNR TYPE RV45A-KUNNR,
       BSTKD TYPE VBKD-BSTKD,
       MABNR TYPE RV45A-MABNR,
       KWMENG(2) type C,
       KBETR(2) type C,
      END OF DD_VA01.
DATA:IT_VA01     Like TABLE OF DD_VA01,
     WA_VA01     Like LINE OF IT_VA01,
     WA_VA01_F   Like LINE OF IT_VA01,
     IT_BDCDATA TYPE TABLE OF BDCDATA,
     WA_BDCDATA Like Line OF IT_BDCDATA,
     W_FNAME     TYPE STRING,
     messtab like bdcmsgcoll occurs 0 with header line,
     it_errmess type table of errmess,
     wa_errmess like line of it_errmess,
     err_message type string.
data: zf1 type i,
      zc1 type c value '2',
      fn(20) type c.
Main Code ************************************************************
PERFORM get_input using 'C:\Documents and Settings\ic881592\Desktop\Daran_bdc_VA01-e.txt'.
SORT IT_VA01 BY AUART KUNNR BSTKD.
LOOP AT IT_VA01 INTO WA_VA01.
if WA_VA01_F-AUART <> WA_VA01-AUART OR
     WA_VA01_F-KUNNR <> WA_VA01-KUNNR OR
     WA_VA01_F-BSTKD <> WA_VA01-BSTKD.
       PERFORM set_header_flag.
       PERFORM create_bdc_header_data.
endif.
PERFORM create_bdc_item_data.
ENDLOOP.
PERFORM call_transaction.
PERFORM errorlog.
Procedures ***********************************************************
form get_input using w_fname.
CALL FUNCTION 'GUI_UPLOAD'
    EXPORTING
      FILENAME            = W_FNAME
      HAS_FIELD_SEPARATOR = '#'
    TABLES
      DATA_TAB            = IT_VA01.
endform.
form call_transaction.
    PERFORM bdc_field       using 'BDC_OKCODE' '/11'.
    CALL TRANSACTION 'VA01' USING IT_BDCDATA MODE 'A' messages into messtab.
    refresh it_bdcdata.
endform.
FORM set_header_flag.
       WA_VA01_F-AUART = WA_VA01-AUART.
       WA_VA01_F-KUNNR = WA_VA01-KUNNR.
       WA_VA01_F-BSTKD = WA_VA01-BSTKD.
       if zf1 = 1.
           PERFORM call_transaction.
       endif.
       zf1 = 1.
endform.   "set_header_flag.
form create_bdc_header_data.
     perform bdc_dynpro      using 'SAPMV45A' '0101'.
     perform bdc_field       using 'VBAK-AUART' WA_VA01-AUART.
     perform bdc_field       using 'BDC_OKCODE' '/00'.
     perform bdc_dynpro      using 'SAPMV45A' '4001'.
     perform bdc_field       using 'KUAGV-KUNNR' WA_VA01-KUNNR.
     perform bdc_field       using 'VBKD-BSTKD' WA_VA01-BSTKD.
     perform bdc_field       using 'BDC_OKCODE' '/00'.
     perform bdc_dynpro      using 'SAPMSSY0' '0120'.
     perform bdc_field       using 'BDC_CURSOR' '04/06'.
     perform bdc_field       using 'BDC_OKCODE' '=CHOO'.
     perform bdc_dynpro      using 'SAPMV45A' '4001'.
     PERFORM bdc_field       USING 'BDC_OKCODE' '=POAN'.
endform. "create_bdcdata
FORM create_bdc_item_data.
     CONCATENATE 'RV45A-KWMENG(' zc1 ')' INTO FN.
     perform bdc_field       using 'BDC_CURSOR' FN.
     perform bdc_field       using FN WA_VA01-KWMENG.
     CONCATENATE 'KOMV-KBETR(' zc1 ')' INTO FN.
     perform bdc_field       using FN WA_VA01-KBETR.
     CONCATENATE 'RV45A-MABNR(' zc1 ')' INTO FN.
     perform bdc_field       using FN WA_VA01-MABNR.
     perform bdc_dynpro      using 'SAPMV45A' '4001'.
     PERFORM bdc_field       USING 'BDC_OKCODE' '=POAN'.
ENDFORM.
form errorlog.
LOOP AT MESSTAB .
    if MESSTAB-MSGNR = '311' or MESSTAB-MSGTYP = 'E'.
        SELECT SINGLE msgnr text FROM T100
                        into wa_errmess
                        WHERE SPRSL = MESSTAB-MSGSPRA
                          AND ARBGB = MESSTAB-MSGID
                          AND MSGNR = MESSTAB-MSGNR.
        IF SY-SUBRC = 0.
          err_message = wa_errmess-TEXT.
          IF err_message CS '&1'.
            REPLACE '&1' WITH MESSTAB-MSGV1 INTO err_message.
            REPLACE '&2' WITH MESSTAB-MSGV2 INTO err_message.
            REPLACE '&3' WITH MESSTAB-MSGV3 INTO err_message.
            REPLACE '&4' WITH MESSTAB-MSGV4 INTO err_message.
          ELSE.
            REPLACE '&' WITH MESSTAB-MSGV1 INTO err_message.
            REPLACE '&' WITH MESSTAB-MSGV2 INTO err_message.
            REPLACE '&' WITH MESSTAB-MSGV3 INTO err_message.
            REPLACE '&' WITH MESSTAB-MSGV4 INTO err_message.
          ENDIF.
          CONDENSE err_message.
          WRITE: / MESSTAB-MSGTYP, err_message .
        ELSE.
          WRITE: / MESSTAB.
        ENDIF.
    endif.
ENDLOOP.
endform. "errorlog
FORM BDC_DYNPRO USING PROGRAM DYNPRO.
WA_BDCDATA-PROGRAM = PROGRAM.
WA_BDCDATA-DYNPRO   = DYNPRO.
WA_BDCDATA-DYNBEGIN = 'X'.
APPEND WA_BDCDATA TO IT_BDCDATA.
CLEAR WA_BDCDATA.
ENDFORM.
FORM BDC_FIELD USING FNAM FVAL.
WA_BDCDATA-FNAM = FNAM.
WA_BDCDATA-FVAL = FVAL.
APPEND WA_BDCDATA TO IT_BDCDATA.
CLEAR WA_BDCDATA.
ENDFORM.
input file :
OR     2148     0001235     R-1162     8     17
OR     2148     0001235     R-1161     2     30
OR     2148     0001235     100-400     6     25
OR     2148     0001235     R-1162     4     12
OR     2148     0001236     R-1162     3     12
OR     2148     0001236     R-1161     2     30
OR     2148     0001236     100-400     1     25
OR     2148     0001236     R-1162     7     12
OR     2148     0001236     R-1161     8     30
OR     2148     0001236     100-400     10     25
OR     2148     0001235     R-1161     5     30
OR     2148     0001235     100-400     2     25
OR     2148     0001235     R-11621     3     12
OR     2148     0001235     R-1161     2     30
OR     2148     0001235     100-400     1     25
OR     2148     0001235     R-1162     7     12
OR     2148     0001235     R-1161     8     30
OR     2148     0001235     100-400     10     25
OR     2148     0001236     R-1162     8     17
OR     2148     0001236     R-1161     2     30
OR     2148     0001236     100-400     6     25
OR     2148     0001236     R-1162     4     12
OR     2148     0001236     R-1161     5     30
OR     2148     0001236     100-400     2     25

How can I use a SCH-LC11 device in CHINA which bought from ebay. I am not Verizon customer but I prefer to using your 4G LTE Router . How can I get the unlock code? The device may have a bad ESN but I only use it in CHINA. Kindly looking forward your repl

How can I use a SCH-LC11 device in CHINA which bought from ebay. I am not Verizon customer but I prefer to using your 4G LTE Router . How can I get the unlock code? The device may have a bad ESN but I only use it in CHINA. Kindly looking forward your reply. Thanks!

It's good to read Antoniad's post. It reassures me that I can use my new iPad as an international communication device which is the reason I purchased the thing. However, I called Verizon today (my provider of cellular data) who told me that I can't just pop in a SIM card as you suggested. He also said that he was from the "Pre-Pay" division of Verizon and he was certain that I couldn't do what I planned to do. I was extremely disappointed as I had called Apple prior to buying the iPad and I read the algorhythm on the website for choosing an iPad before purchasing. Those sources were quite specific and the information seemed clear. I would be able to use my iPad to communicate through cellular connections while traveling on the road, literally, abroad. I was told that I could pop in a data card wherever I was, just as you indicated in your message above, and voila I was good to go. The Verizon rep definitively rained on that parade, but said that I might be able to do this if I have a "Post-Pay" account, a different area of Verizon. I haven't had the chance to talk to this division yet, so I looked to Apple's Support for answers. Maybe I will find out that I can use my iPad as an international communication device while traveling on the road afterall, however, it appears I may need a different type of account (Post-Pay), something I was never warned about. Can I switch to this kind of account? I don't know. I have to find out. If you have any information about this issue, it would be good to share since I strongly suspect there are others who bought the iPad for the same purpose that I have.

I need to make a task with less as3 code and more timeline structure and event dispatcher !

I went to an interview in a big company. I had to make a task in which there is a wall with 3 lines and 5 columns filled with bombs.When you click on a bomb the bomb changes its scale, a robot enters, goes under the bomb and takes it, then goes to a smaller wall, makes the bomb smaller and place it at the same place it had been in the previous wall.I made the task with tween througout as3 code.The interviewer told me it was good but i need to make it with the less code possible and with more complex timeline structure and to use event dispatcher.What is the best way to do this ?

The immediate thing that comes to mind is they might want to see that you can balance work between design teams and development teams.
To do that, the robots movements (pick up bomb, bomb grows/shrinks, arms/treads/legs moving, sequences of 'doing things') can be timeline based so animators can work on those separate from code.
Developers would be working on the logic of keeping score, moving the robot around to the correct spot with path detection, collision detection, etc.
It's very similar to thinking in simple factories (which Flash is good at being automatically with timelines), and a bit of MVC (or just VC in some cases).
Big companies have lots of different types of employees so you'll probably be very specific in your role so you're efficient.

Reg calling Transaction code in Webdynpro ABAP

Hi All,
Can I call Transaction code in Webdynpro ABAP Portal Application. If so, how can this be possible? Can anybody give me a lead?
Thanks.
Kumar Saurav.

Hi,
The most easy Way is here:
1) Test any Webdynpro Application from SE80 when the webdynpro Browser opens to display output
Copy its HTTP link, Suppose we get the below link
http://r3d01web1.Siemens.dk:8001/sap/bc/webdynpro/sap/z_dynamic_view?sap-client=002&sap-language=EN
2) Now replace some part of the above link ( webdynpro/sap/z_dynamic_view?sap-client=002&sap-language=EN ) with the new link part ( gui/sap/its/webgui?~transaction=PA30 )
So that the newly generated link is such that the below one:
http://r3d01web1.Siemens.dk:8001/sap/bc/gui/sap/its/webgui?~transaction=PA30
Note in place of PA30 you can put any of your desired tcode.
3) Now Just Make a webdynpro component and in its View layout put a LINK TO URL ui element
and in its property REFERENCE just past the http link ( http://r3d01web1.Siemens.dk:8001/sap/bc/gui/sap/its/webgui?~transaction=PA30 )
4) Activate and test your webdynpro Application.

Migrate existing code of AS3 to AS2 - URLRequest, URLLoader

Hi,
I have written code to read an XML file by using URLRequest and URLLoader in ActionScript 3.0. Code is pasted below. This runs well in AS3. Problem I am facing is because I wrote this in AS3, I am not able to use the DateChooser component in another part of the flash module because it seems like DateChooser component is not supported in AS3. So I want to migrate my below AS3 code back to AS2.
**** Code in AS3 (I need help in writing equivalent code in AS2) :-
var xmlText:XML ;
var xmlReq:URLRequest = new URLRequest("myFile.xml");
var xmlLoader:URLLoader = new URLLoader();
xmlLoader.load(xmlReq);
xmlLoader.addEventListener(Event.COMPLETE,xmlLoaded);
function xmlLoaded(event:Event):void
xmlText = new XML(xmlLoader.data);
info_txt.htmlText = xmlText.someTag ;
**** I cannot use the above as is because, when I change the publish settings from AS3 to AS2, I get following errors -
The class or interface 'URLRequest' could not be loaded.
The class or interface 'URLLoader' could not be loaded.
The class or interface 'Event' could not be loaded.
Same works well in AS3. What should I do to make this work in AS2 or can anyone direct me in writing an equivalent in AS2.
Please assist.
Thanks in advance.
MG

parsing is done using the xmlnode methods and properties. how you parse an xml file (in as2) depends on its structure. but generally, you use firstChild, nextSibling, childNodes and nodeValue in the appropriate sequence to extact data. the flash help files have sample code. for tutorials, check google.
if you're trying to load a cross-domain xml file, you'll have a cross-domain security issue to deal with.

Can AS1 code call AS3 code?

Similar Messages

Maybe you are looking for