Can connect to USB Hard Disk via OS X 10.5, but not 10.5?

I'm able to connect to my USB Hard Disk in OS X 10.5 by simply going to "SHARED" in the Finder, but I don't see it anywhere in OS X 10.4. My 10.5 computer is connected to the AirPort Extreme via wireless, my 10.4 computer (it's actually OS X Server 10.4.11 ) is connected via a LAN port.
If I go to the Finder and select "Network" I just see "Servers" which shows the 10.4 system I'm on. I don't see anything about the AirPort Extreme or USB Hard Disk connected to it.
Any ideas on how I can see the USB Hard Disk on OS X Server 10.4.11 connected to the AirPort Extreme via a LAN port?
Thanks!

You should be able to connect to the disk via SMB from your 10.4 computer. Do you know the IP of the airport express base station? If so, use the Go menu from the Finder of the 10.4 machine and use *Connect to Server*. Enter the Server Address as smb://basestation.ip.address.here and click connect. It should present you with a login box and then mount your shares when you provide the correct credentials.
On my airport extreme base station I have File Sharing enabled with base station password, guest access NOT allowed. My credentials are my account username (probably doesn't matter what name you put) and the base station password. It mounts the shared disk perfectly.
Under 10.5, this method (for me anyway) has been MUCH more reliable than using the Airdisk feature. I disabled Airdisk on the client and now I always mount the share using SMB this way. It seems snappier and the problem where I used to get a drive mounted but then be unable to see anything on it has gone away.
If you want it to automount each login (I know this method works on 10.5, can't remember about 10.4) use the *Connect to Server* dialog and enter the Server Address then click the + sign to add the server to your Favorites (the box under the Server Address line.) Then go to your Library folder in your Home directory. You will see the link you put in Favorites stored there as a file. Drag that file into the Login Items list in your user account in the Accounts pane in the System preferences. To see the connection on your desktop you need to make sure you have your Finder Preferences set to show *Connected Servers* on your Desktop. Click on the Finder menu (when you have Finder selected), then Preferences.

Similar Messages

  • Hard disk stop working how can recovery may new hard disk on mac book pro and i not have recovery disk the recovery is installed in soped hard disk

    i have macbook pro the recovery is in hard disk and not have recovery disk and hard disk stop working now i want to change hard disk but how can i recovery my macbook pro can help me ?

    "it shows macintosh HD OSX 10.9.5 but the hard drive that is supposed to be in the upper right corner is not showing up. So it is booting from that drive."
    Ok go to "Finder" preferences and make sure the "Hard disk" box is checked.
    That will make your boot disk show up in the upper right corner. You can tell it's a boot disk because all the files will look like this instead of just being blank files.

  • HELP: can connect to FB, TWITTER, MySPACE, BBM and other instant messaging but not to youtube and other sites

    I'm just a newbie. I got my Curve 9220 a month ago. The phone is really good but i have some problems regarding my about phone. You see i can access my social sites and application and can be done in my web browser but strangely i can't connect to other sites except those mentioned sites. I can use my bbm and some instant messaging applications (YM, Gtalk etc) but unfortunately not my bb app world. 
     By the way my carrier is globe, I have called them about this matter, they told me they have fix it but until now nothing happens. It's frustrating you know?
     Is there a way that I could do it manually by my self? Or should I call them again until they have got my problem fixed?
     Additionally, its odd because I can't even go to thier mobile website. How this could happen when I'm not restricted to access my social site?

    In addition to this, I can send and receive emails.. hope you can help me.

  • HT4101 I am trying to connect my JVC Hard Disk Drive Camcorder to my IPAD 2 via the Apple camera kit. I am able to down photos, but video files not showing. Camera shows Mass Stoarge. How can I download videos please.

    I am trying to connect my JVC Hard Disk Drive Camcorder to my IPAD 2 via the Apple camera kit. I am able to download photos, but video files not showing. Camera shows Mass Stoarge. How can I download videos please?

    The file name only has 6 characters and I'm not sure what the .mod format is. So that's why they are not seen by the iPad.
    Another way to transfer. You can use a USB flash drive & the camera connection kit.
    Plug the USB flash drive into your computer & create a new folder titled DCIM. Then put your movie/photo files into the folder. The files must have a filename with exactly 8 characters long (no spaces) plus the file extension (i.e., my-movie.mov; DSCN0164.jpg).
    Now plug the flash drive into the iPad using the camera connection kit. Open the Photos app, the movie/photo files should appear & you can import. (You can not export using the camera connection kit.)
    Secrets of the iPad Camera Connection Kit
    http://howto.cnet.com/8301-11310_39-57401068-285/secrets-of-the-ipad-camera-conn ection-kit/
     Cheers, Tom
    Look at this link for convertion the .mod format.
    http://www.makeuseof.com/tag/convert-mod-camcorder-video-format-mpg-instantly/
    Message was edited by: Texas Mac Man

  • I get the question mark in the folder on start up, but if i connect the same hard drive via usb it works fine is the hard drive faulty?

    but if i connect the same hard drive via usb it works fine is the hard drive faulty?

    It sort of sounds like a startup disk issue.  Have you tried starting up holding down the "Option" key?  This should generally give you the option of which drive you want to boot from after a few seconds.  Sometimes, especially if you had previously booted from an external drive (and it sounds as if you have) they system wants to continue booting from that drive.  If it can't find it, it just sort of hangs there.  Try holding down the "Option" key and see if your internal drive is shown as an option.  If it is, select it.  If you manage to get into the OS, go to System Preferences / Startup Disk and select the correct drive (even if there is only one drive shown, you should still select it).

  • How to share Windows 7 Internet connection AND Extreme USB hard disk?

    Hi All,
    I'm trying to share the mobile broadband Internet connection on a Windows 7 PC as well as the USB hard disk connected to the Airport Extreme (2nd Gen) with other WiFi devices. The problem is that I can get either the one to work or the other, but not both.
    When I configure the Airport Extreme for DHCP+NAT, all machines on the Airport network can see each other, share files, etc. When I enable Internet Connection Sharing on the Windows 7 machine, the only way I've gotten that to work is to set the Airport Extreme to bridge mode, but then file sharing of the Airport Extreme's disk no longer works.
    Device info: Internet-connected Dell Latitude E5420 Windows 7 Professional 32-bit, Airport Extreme 802.11n (2nd Gen), Windows XP Home Edition + Nokia N8 + etc. WiFi devices.
    I've read all the manuals I could find and searched these forums but haven't been able to figure out a solution. I'm really getting desperate and will really appreciate any and all suggestions!
    Many thanks,
    Francois

    I've found a solution that works with my existing equipment. It's now possible to share the Windows 7 machine's Internet connection at the same time as the AirPort's drive. An additional challenge was to avoid having to manually reconfigure every WiFi client, but it turned out that's also possible.
    For the sake of posterity, here's the guide! :-)
    Background
    My setup is based on an AirPort Extreme access point WiFi network. The AirPort shares a hard drive, and a number of Windows clients connect to the network. One of these, a Windows 7 machine, has a USB mobile broadband dongle which I also wanted to share with the network.
    Previously I got this to work, but whatever configuration I came up with required manual reconfiguration of each network client, one way or the other. This was not ideal. Also, Internet Connection Sharing (ICS) defaults to IP address .1, the same one to which the AirPort defaults. This needed manual reconfiguration of the ICS host each time ICS was turned on.
    Solution
    THIS SOLUTION REQUIRES THE AIRPORT TO BE IN EITHER DHCP + NAT OR DHCP MODE. IF FOR SOME REASON YOU DEPEND ON THE AIRPORT BEING IN BRIDGE MODE, UNFORTUNATELY THIS SOLUTION WILL NOT WORK FOR YOU.
    1. Do the AirPort's non-Internet configuration
    On the AirPort Utility main screen, click the AirPort button, work through all the tab sheets and configure the items as you require. Do the same for the Printers, Disks and Advanced buttons. Once that's complete, we can do the Internet configuration.
    2. Set the AirPort to DHCP & NAT
    This is needed so you can choose the AirPort network address in the next step (but you can still set a different Connection Sharing mode later on, see step 7). For now, set Connection Sharing to Share a public IP address:
    3. Set the AirPort to the same network address as ICS
    Set the AirPort to the network address used by ICS, namely 192.168.137.xyz. Note that the AirPort does not allow a beginning address below 2:
    4. Obtain the AirPort's MAC addresses
    These will be used in the next step. Record both the Airport ID as well as the Ethernet ID:
    5. Fix the AirPort IP addresses to prevent clashing with ICS
    The AirPort will default to the same IP address as ICS, namely 192.168.137.1. To prevent this, assign different addresses to the AirPort with DHCP reservations. Underneath DHCP Reservations, click the '+' and create reservations for each of the AirPort and Ethernet interfaces. You can use other values, but to be consistent with the rest of this guide use 192.168.137.253 for the AirPort interface and 192.168.137.254 for the Ethernet inteface:
    6. Distribute ICS configuration data with AirPort DHCP
    Yes, you read right! This is where the magic happens. To avoid having to manually configure each WiFi client for the additional ICS network, that configuration data is included with the AirPort DHCP configuration. Assuming you've stuck to the numbers above, configure the TCP/IP screen exactly as shown. .254 is the AirPort router (and also its Ethernet interface) address, and .1 is the IP address that Windows configures for the ICS interface:
    7. Set AirPort Connection Sharing
    If your AirPort is sharing a connection on its WAN port, choose Share a public IP address, otherwise choose Distribute a range of IP address. In the latter case the NAT tab disappears:
    8. Save your AirPort's configuration
    Your AirPort configuration is now complete and you can push the Update button. Once your AirPort has rebooted, its network will be fully operational.
    9. Ensure your Internet sharing port is correctly configured
    ICS involves two network ports on the sharing computer - the shared Internet-connected port, and the sharing port connected to your local network. When you enable ICS on the shared port, Windows will temporarily configure the sharing port's settings to fit in with the scheme above (it will get the fixed IP address 192.168.137.1). When ICS is disabled, Windows will restore the default configuration of the sharing port. The purpose of this step is to ensure that the default sharing port configuration is correct. When ICS is inactive the sharing port needs to obtain an IP address automatically from the AirPort via DHCP. Right-click your chosen WiFi sharing connection > Properties > Networking > Internet Protocol Version 4 (TCP/IPv4) > Properties and configure as follows:
    10. Share your Internet connection
    Right-click the connection you want to share > Properties > Sharing and configure as follows (you may find the other settings also useful but they're not covered here):
    And now you're ready to enjoy your local network services as well as your shared Internet connection, all on your Airport Extreme network - without having to lift a finger to configure network clients!
    Windows Network Profiles
    If you use Windows network profiles to distinguish between Home, Work and Public networks, here are some additional notes you may find useful.
    As Windows recognises networks, it applies their assigned profiles which add or remove sets of restrictions wrt. network discovery, file & printer sharing and so on. The amount of ICS configuration data that can be included with AirPort DHCP information is limited and in some instances this interferes with how Windows recognises networks.
    It seems that Windows recognises a network once a default router has been configured for it. Following are some known scenarios with fixes for each, based on that principle.
    1. WiFi network not recognised
    When ICS is enabled, on the ICS host Windows configures only an IP address for the sharing port and no default router. When ICS is disabled, on the ICS host this port receives its configuration from the AirPort via DHCP, as do all other WiFi clients. This DHCP configuration includes router information for the ICS network, but again no router information for the AirPort network itself.
    Therefore the AirPort network is not recognised on any Windows machines on the WiFi network, under any circumstances.
    To make Windows recognise the AirPort network, execute the following from the command line with Administrator privileges:
         route -4 add 0.0.0.0 mask 0.0.0.0 192.168.137.254 metric 3000
    This metric is high enough to ensure that "real" default routes get preference over this one.
    If you want to remove the above routing table entry, execute the following from the command line with Administrator privileges:
         route -4 delete 0.0.0.0 192.168.137.254
    For convenience I created shortcuts for these two commands.
    2. WiFi network recognised, unrecognised network remains
    Once you've added the route above to make Windows recognise your AirPort network, when ICS is disabled Windows will probably identify TWO networks on your WiFi adapter:
         Unidentified network, your_AirPort_network
    Windows now recognises your AirPort network, but the DHCP router entry for the inactive ICS network makes it think there must be yet another network. However, the 192.168.137.1 ICS port is not present when ICS is inactive, so Windows reports the inactive router entry as an unidentified network.
    If you want to remove this unidentified network/router entry, execute the following from the command line with Administrator privileges:
         route -4 delete 0.0.0.0 192.168.137.1
    On your Windows ICS host, removing this entry can cause no harm.
    However, on network clients where you removed this entry and subsequently want to share your Internet connection from again, you'll need to add it back.
    To restore the ICS router entry, execute the following from the command line with Administrator privileges:
         route -4 add 0.0.0.0 mask 0.0.0.0 192.168.137.1 metric 1

  • Cannot see my shared USB hard disk's connected on my Mac-mini on my Macbook

    As you all can see, I'm a Mac user since 1989, i've don't like working on a windows-computer.
    But i've got a problem since I'm using Mac os X 10.5. If i try to make a connection with my Macbook pro to my Mac-mini (my Mac-mini has two USB hard disks) i cannot select the USB hard disks. But my WIDOWS computer has no problem to approche these disks???? Can anyone help me????

    Hi WillemH777-NL and welcome to the discussion forums.
    On the MacMini open system preferences-->sharing
    then select 'File Sharing' from the Service column. Then under Shared Folders make sure your 2 usb drives are listed, if not click the + sign and add them.
    then click the 'options' button
    make sure Share files and folders using AFP is checked
    make sure Share file and folders using SMB is checked
    Then switch on the names of the users and the mac can use the smb service.
    then click Done
    Now see if you can access the mini's sharepoints.

  • Trouble connecting to external USB hard disk through PC

    I've had AirPort Extreme 802.11n for a few months which I use to connect to a printer and to share a USB hard disk between my eMac and my thinkpad. For a while everything was working beautifully. The disk showed up on my eMac desktop and in my Windows XP file explorer. Then recently the USB disk stopped connecting at all to either computer even after trying the old remedy of connecting directly to my Mac, dismounting it, and reconnecting. Then today a bunch of updates for the AirPort Utility became available and after updating to 5.3.1 on my eMac the disk shows up on my eMac again. But on my PC here's the situation: the disk appears in the AirPort Utility for Windows (5.3.1) but I can't find it in Windows file explorer. I tried the alternative ways of connecting shown here:
    http://docs.info.apple.com/article.html?artnum=306119
    but no dice.

    Uhmmmmmm, you meant to say the Macbook Air DOES have (2)  USB PORTS 
    GENEDI, yes, you can connect a 2.5" USB external HD to your Mac AIR, ...... done it a 1000 times 

  • Can not connect an external hard disk

    Hello,
    For the second time , I have a problem while connecting a external hard disk. (the first issue was not solved).
    Previously, I was triying to connect my external hard disk. But my powerbook 10.4.11 could not see it. I could heart my external disk "running". It was doing a small repeatitly noisy. But in the finder, it was not displayed.
    Now I am triying with another one and I am experiencing the smae problem. Finder does not displayed it.
    I guess the USB port does not display enough power. But I am not sure.
    Do you have a idea how can I solve my proble in order to be able to see external hard disk and copy file in it?
    Many thank for your help

    I connected the external hard disk to a pc and checked the in disk management management tools. I activate the partition of the external hard disk, then I reconnected it to my Powerbook 10.4.11 and FInder can not see it...

  • Can I connect an external hard disk to time capsule? I tried but it doesn't show up. What would be the reason??

    Can I connect an external hard disk to time capsule? I tried but it doesn't show up. What would be the reason??

    The USB drive must be formatted for Mac in Mac OS Extended (Journaled), or if you want to use both Mac and Windows files, the drive can be formatted in FAT32.
    A number of drives are formatted for Windows only in a format called NTFS. This willl not work on the Time Capsule.
    In addition, the USB port on the Time Capsule is under powered. You almost always have to use a powered USB hub when you connect a drive to the Time Capsule...even if the drive has its own power supply.

  • HT204023 Hey guys I am having a problem. Could you guys give some suggestion? I can connect personal hotspot from iPad 5 to iPhone 5s via Bluetooth  but the wifi doesn't recognize and can't connect. USB and Bluetooth sharing of hotspot is okay but wifi do

    Hey guys I am having a problem. Could you guys give some suggestion? I can connect personal hotspot from iPad 5 to iPhone 5s via Bluetooth  but the wifi doesn't recognize and can't connect. USB and Bluetooth sharing of hotspot is okay but wifi doesn't

    troubleshooting hotspot http://support.apple.com/kb/TS2756

  • Can I Connect a USB Hard Drive Directly to the IX4-300D?

    I need to copy large amounts of data from a USB hard drive to the IX4-300D. So can I connect the USB hard drive directly to the USB port on the IX4-300D?
    If "yes", how does the USB hard drive show up in Windows so I can select the file to copy?

    Hi exceptionalht,
    The USB ports are intended for external storage devices such as flash drives and USB hard drives. Once you connect the hard drive to the USB port, the device's content will show up as a new share in the Shares page. You should be able to map that share in Windows or have Storage Manager map it automatically.
    To safely remove the external hard drive, go to the External Storage page and click the eject icon for that device.
    Have questions and need answers?
    Search the database for answers to FAQ's, software/driver downloads, tutorials, news, features and more!
    LenovoEMC Support & Downloads
    LenovoEMC North America Support Contact Page

  • 'Lombard' PowerBook won't see external USB hard disk?

    I connect an external hard disk to a 'Lombard' PowerBook (Mac OS X 10.3.9) via USB and get the message "You have inserted a disk containing no volumes that Mac OS X can read." I connect the same disk to my MacBook Pro via USB and it mounts fine. I've run DiskWarrior on it, but it still won't mount on the 'Lombard'. Other USB devices work fine, e.g. USB flash drive. I know the 'Lombard' won't boot from an external USB disk, but will it also simply not read it at all?

    HandyMac,
    You are caught between a rock and a hard place. MacOS X 10.3.9 or earlier cannot mount/read a volume that has been partitioned using the GUID Partition Scheme adopted by the Intel Macs. PowerPC Macs use the older Apple Partition Scheme. You can reformat the USB HD on your Lombard (a PowerPC) using the Apple Partition Scheme and it will also mount/read/write on the MacBook Pro. However, if you are also using this HD as a bootable volume for the MBP, the HD must remain in the GUID Partition Scheme. The tech article below is discussing FireWire Target Disk Mode but I assume the same restriction applies also to removable media. I would confirm this on either the MBP Discussions or the Tiger Discussions.
    http://docs.info.apple.com/article.html?artnum=303118
    http://docs.info.apple.com/article.html?artnum=303220

  • What do I need to connect a USB hard drive to the bfsw11s4 to have an lan storage?

    Is it possible to conect an USB hard disk to the bfsw11s4 directly & what do I need?
    I want to make a Lan storage like a storage router.
    Thank you

    No it is not possible as BEFW11S4 do not have USB port on it .....
    You can go for either WRT150N  or WRT350N for such kind of connection.....

  • Arch: Install to & run from External USB Hard Disk Drive (HDD)

    I wanted to play with ArchLinux 2009.02, but replacing the existing Debian-Lenny on the laptop's HDD wasn't an option. So I experimented with installing Arch on an external USB Hard Disk Drive.
    I have tried to make this "newbie-friendly", so I hope the more experienced will forgive the detail.
    Materials:
    Three year old Dell Inspiron 6000
         CPU = 2.0 GHz Pentium
         RAM = 2.0 GB
         Internal HDD = 80 GB
         Internal CD/DVD R/RW
    External USB HDD = Freecom FHD-2 Pro 80 GB
    Archlinux 2009.02 install CD
    Steps to install:
    1. I put the Archlinux install CD in the drive and connected the external 80 GB HDD in the USB port.
    2. When the Dell laptop was booted, I pressed F2 to enter the BIOS setup. I edited the boot sequence to the following:
         Internal CD/DVD
         External USB device
         Internal HDD
    On the Dell, you can also press F12 to select the preferred boot device for that boot.
    3. I started the laptop and the Archlinux installation menu came up and I proceeded with installation following the "Official Arch Linux Install Guide" and the "Beginners Guide".
    4. Used km to change to UK keyboard layout and then began the installer script (/arch/setup). I was installing from the core CD so I skipped the network steps.
    5. HDD preparation.
    This was fairly straightforward with two cautions:
         (a) Make very sure that the external HDD (sdb) is selected for the operations.
         (b) Remember to set the Bootable Flag for the first (/) partition on the HDD.
    I chose 20 GB for /, 2 GB for swap and the remainder for /home.
    6. The package selection and installation was fairly straightforward.
    7. Configuration of System
    This was section was straightforward with one warning:
         USB had to be added to the HOOKS in the /etc/mkinitcpio.conf file!
    I found this to be essential for my external USB HDD to function as a bootable device. Otherwise I got the same sorts of errors relating to unrecognisable file system types that other people have reported in the forum.
    The relevant line from the end of the edited /etc/mkinitcpio.conf file is below:
    HOOKS="base udev autodetect pata scsi sata usb filesystems"
    8. Installation of GRUB was the other point where caution and/or correction was necessary.
    When it asked where GRUB should be installed, I had to select sdb (my external USB HDD) and not any of the particular partitions on sdb. If the root partition sdb1 was selected then the laptop won't boot from the external USB HDD.
    The GRUB /boot/grub/menu.lst as written by the installation routine specifies hd(1,0) which doesn't work when you try to reboot from the external USB HDD. When you boot Arch from the external USB HDD, as far as Arch is concerned - at that point in time - the external USB HDD is the first drive in the system. To fix this:
         (a) When the Arch boot menu comes up, press e to edit the grub entries.
         (b) Change the first line to hd(0,0)
         (c) To the end of the kernel line add rootdelay=8
         (d) Press b to boot the system with these temporary corrections.
         (e) Once your Arch system has booted, edit the /boot/grub/menu.lst to make the above changes permanent.
    The relevant portion of my /boot/grub/menu.lst looks like the following:
    # (0) Arch Linux
    title  Arch Linux
    root   (hd0,0)
    kernel /boot/vmlinuz26 root=/dev/disk/by-uuid/... ro rootdelay=8
    initrd /boot/kernel26.img
    # (1) Arch Linux
    title  Arch Linux Fallback
    root   (hd0,0)
    kernel /boot/vmlinuz26 root=/dev/disk/by-uuid/... ro rootdelay=8
    initrd /boot/kernel26-fallback.img
    9. The laptop happily and consistently boots Arch Linux from the external USB HDD when it's plugged in before startup/booting.
    Running Arch from the external USB HDD seems as quick as running Debian from the internal HDD.
    So if there is a performance penalty associated with using an external USB HDD, my wife and I haven't noticed.
    In summary, the three essential points to address during installation to an external USB HDD are:
         Remember to set the bootable flag for the first partition.
         Add USB to the HOOKS for /etc/mkinitcpio.conf file.
         Correct the /etc/grub/menu.lst file.
    I hope this is helpful.
    Ted

    Hi Rookie,
    As you say, it is worth remembering the rootfstype= option for the kernel line just in case someone still has problems with GRUB after making all the other changes.
    I was working with the most recent Arch 2009.2 release.
    I only got messages about unrecognisable file system type when I tried booting with the "stock" or "as-installed" GRUB (before I edited /boot/grub/menu.lst). After editing /boot/grub/menu.lst to identify the drive correctly and add rootdelay, GRUB was able to do the rest and everything worked OK without any error messages.
    Best wishes,
    Ted

Maybe you are looking for