Can DB polling be done on base tables directly?

IS there an alternate solution if not done directly?

you mean base tables in the Oracle EBS ? I think that won't be a good practise, instead you can try the interface tables...

Similar Messages

Can we enter data in any standard table directly through custom form??

Dear All,
Can we enter data in any standard table directly through custom form??
I have create custom form in R.12. I want to insert data in quality standard table directly through custom form. Need experts guideline.
Awaiting regards,

Hi,
Can we enter data in any standard table directly through custom form??
I have create custom form in R.12. I want to insert data in quality standard table directly through custom form. Need experts guideline.
Awaiting regards,
I would not recommend touching the standard tables at all unless you are being guided by the SR. For a record to be in the standard table it should go through series of validations based on the what operation you are performing and some times datas are dependent upon the other tables, and also some times the same records are hit to so many other tables simultaneously.
Therefore I would not recommend this brother.
Thanks &
Best Regards,

CC&B 2.3.1 - Custom indexes for base tables

Hi,
We are seeing a couple of statements in the database that could improve its performance with new custom indexes on base tables. Questions are:
- can we create new indexes on base tables ?
- is there any recommendations about naming, characteristics and location for this indexes ?
- is there any additional step to do in CC&B in order to use the index (define metadata or ...) ?
Thanks.
Regards.

Hi,
if it necessary You can crate custom index.
In this situation You should follow naming convention from Database Design Standards:
Indexes
Index names are composed of the following parts:
+[X][C/M/T]NNN[P/S]+
+•     X – letter X is used as a leading character of all base index names prior to Version 2.0.0. Now the first character of product owner flag value should be used instead of letter X. For client specific implementation index in Oracle, use CM.+
+•     C/M/T – The second character can be either C or M or T. C is used for control tables (Admin tables). M is for the master tables. T is reserved for the transaction tables.+
+•     NNN – A three-digit number that uniquely identifies the table on which the index is defined.+
+•     P/S/C – P indicates that this index is the primary key index. S is used for indexes other than primary keys. Use C to indicate a client specific implementation index in DB2 implementation.+
Some examples are:
+•     XC001P0+
+•     XT206S1+
+•     XT206C2+
+•     CM206S2+
Warning! Do not use index names in the application as the names can change due to unforeseeable reasons
There is no additional metadata information for indexes in CI_MD* tables - because change of indexes does not influence generated Java code.
Hope that helps.
Regards,
Bartlomiej

I-Receivables Base Tables

Hi All,
Can any one pls share the base tables for I-RECEIVABLES module.
Regards,
Susi.

Hi Susi,
Did you have check on the:
http://etrm.oracle.com/
Thanks &
Best Regards,

Can Shuttles be based non-base table ViewObjects with transient attributes

Hello,
Users have to select records from a data collection and a Shuttle looks most appropriate/nice for this purpose. We can introduce technical intersection tables in order to generate the Shuttles with JHeadstart 10g R3 if necessary, but there is no “functional” need to update any data in the database and therefore it would be practical if the ‘right’ side from a Shuttle can be based non-base table ViewObjects with transient attributes only. So, our interested is to know which records have been selected, i.e. moved to the right side from the Shuttle.
Hope that my question is clear enough.
Greetings,
Michael

Michael,
This cannot be generated out-of-the-box.
It is easiest to add the shuttle post-generation to your page, and then create a custom template to generate your custom shuttle into the page. I suggest you take a look at an example of a generated shuttle in a page, and the JHeadstart IntersectionShuttleBean class. You will see that the value property of <af:selectManyShuttle> points to the selectedKeys method in the JHeadstart Shuttle bean. In your case, you can create your own managed bean and bind the value property to your own method which will provide you access to the selected rows. The value property of the selectItem within the af:selectManyShuttle determines the property that is used to identify the selected row (which is the row key in case of Jhs-generated shuttles).
Steven Davelaar,
JHeadstart Team.

How can I find a data base table containing a GUID, which is result of the macro's execution?

Hello,
please help me to understand how the macros work. I am facing database inconsistency. The CRM-system retrieves a GUID of an opportunity’s item and checks its existence. However, this GUID (here it is es_info-ref_object) does not exist. As result, an exception is triggered.
I am trying to figure out which data base table is responsible for the inconsistent data. Instead of SELECT statement, I see in the debugger that a macro retrieves the “guilty” entry .
macro_execute macro_msg_data_read_rea.
My Question: How can I find a data base table containing a GUID, which is result of the macro’s execution?
Thanks a lot
Andrej

When you save a PDF out of Distiller it doesn't just have different options, it's an entirely different program. It doesn't do things the same way, so it can't have the same options. Saving from Distiller is in many ways better, expecially in that transparency isn't flattened.
What specific options are you looking for?

How can u trace process of workflow throug workflow base table.

Hi,
My previous question might be confusing
Just want to ask
How can u trace process of workflow throug Which workflow base table.
Please It's urgent
Thanks
Bachan

Bachan,
Why do you need to enable trace from the backend? You can run "bde_wf_item.sql" script, this script gives similar information as wfstatus.sql and wfstat.sql give but with more debugging information
Note: 187071.1 - bde_wf_item.sql - Runtime Data of a Single Workflow Item
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=187071.1

How can i extract the particular data from Base tables

Hi
I have some Base R/3- Tables . I need to exact the data from these base tables.
But i need to select some type of datarecords(eg: select Material Documents from MSEG and MKPF tables based on movement types 261,262).
Something like that . So how can i select the particular category datarecords from base tables. Anyway im going to create the Custom DataSource.
So please let me know . how can i extarct tha particular data from base tables
kumar

Hi Venkat
See i have some 5-tables . I need to extarct from these tables.
first i need to extract the data from one table fully.
Then i need to extarct the data from second table based on profict centers, company codes of first table.
Then i need to extract the data from third table based on profict centers of first table and movement type = 2p,2n,2s condition.
So how can i extarct like this data from multiple tables.
Please let me know
kumar

How Many NUMBER Fields Can SINGLE DATA BASE TABLE CONTAIN

How Many NUMBER Fields Can SINGLE DATA BASE TABLE CONTAIN

Hi
One Database table contain 249 Fields.
Rewards Points if useful..
Regards
Nikunj Shah
Edited by: Nikunj Shah on May 13, 2008 1:08 PM

REG: base table/view error

Hi,
I am trying the execute my interface last week and it was running fine but when i try to execute i am getting the following error. can any one tell me what is the cause.
0 : : org.netezza.util.PSQLException: ERROR: Base table/view 'xxxxx' attr 'MILES_DRIVEN' has changed (precision); rebuild view 'xxxx'
Thanks,
GA

Hi Srinivas...
I restricted the view with following selection condition.
JEST INACT NE 'X'.
After that i get like that 2 records.
Example:
EQUNR ESTAT AEDAT STSMA
000000001000000798 E0005 25.03.2004 ZE_00002
000000001000000798 E0007 30.06.2007 ZE_00002
But for that Equip number if i select the OBJNR and check the STATUS in JEST i have only one active record
050 IE000000001000000798 E0005 001
Actually then in the output u should get only record as said by you since u are getting one status value for objnr .....
Actually in our case for a particular objnr we got 6 status values out of these two status values are inactive... so we are left with 4 active status values we took thee four values and checked in text table and we got four values and in this there is one no display so we finally got three values....for a order...
we need to loop over the particular order and store all the status values into a single field ...
this cant be achieved directly through a view i gueesss we need to go for function module...
i has to implement this and i will gett back to you once it is done.....
regards
vamsi

PO Base Tables and Validation

Hello All,
I need to develop conversion interface of open purchase orders.
Need help to know what are the base tables which are used for the same.
Also Need to know what all validations needs to be done.
I have identified a few.
1     PO Number already Exists in Oracle EBS.
2     Vendor not defined in Oracle EBS.
3     Currency Code not defined in Oracle EBS.
4     Bill to Location Not defined.
5     Ship to Location not defined.
6     Payment Terms not defined in Oracle EBS.
7     Vendor Site not defined
8     Buyer Not defined in EBS
9     EBS Ship to Org does not exist
9     UOM Code not defined in EBS
10     Account Code not valid
Can someone pls help with the experiences.
Thanks

Hi,
3 important tables when you are converting the PO's in Oracle interface are
PO_HEADERS_INTERFACE
PO_LINES_INTERFACE
PO_DISTRIBUTIONS_INTERFACE
Normally when you are converting the data through the stanadard interface, all validations are taken care by the above interface tables, Import Standard Purchase Orders is the standard concurrent program provided by oracle to load the data from standard interface to the base tables. PO_HEADERS_ALL, PO_LINES_ALL, PO_LINE_LOCATIONS_ALL, PO_DISTRIBUTIONS_ALL.
And also you need to take care of the partially received PO's, Partially Billed PO's.
Hope this Helps,
Raghav

Index Compression in SAP - system/basis tables?

Hi!
In thread Oracle comression in SAP environments the Oracle 10g feature index compression was discussed. We are now going to implement it also. SAP and Oracle say, this can be done for any index.
So we selected the biggest and the most frequently used indexes and analyzed them. We could save about 100GB disk space.
But here comes my question:
In the hitlist of our most frequently used and biggest Indexes there are also some basis table indexes.
A few samples:
BALHDR~0
BALHDR~1
BALHDR~2
BALHDR~3
BDCP~0
BDCP~1
BDCP~POS
BDCPS~0
BDCPS~1
CDCLS~0
CDHDR~0
D010INC~0
D010INC~1
D010TAB~0
D010TAB~1
DD01L~0
DD03L~5
DD07L~0
E071K~0
E071K~ULI
GVD_LATCHCHILDS~0
GVD_OBJECT_DEPEN~0
GVD_SEGSTAT~0
QRFCTRACE~0
QRFCTRACE~001
QRFCTRACE~002
REPOSRC~0
SCPRSVALS~0
SEOCOMPODF~0
SMSELKRIT~0
SRRELROLES~0
SRRELROLES~002
STXH~0
STXH~REF
STXL~0
SWW_CONT~0
TBTCS~1
TODIR~0
TRFCQOUT~5
USR02~0
UST04~0
VBDATA~0
VBMOD~0
WBCROSSGT~0
Is it really recommended to compress indexes of SAP Basis Tables also - especially in the area of Repository/Dictionary, t/qRFC and/or "Verbuchung" (VB...)?
Thanx for any hint and/or comment!
Regards,
Volker

Hi Volkar,
I have succesfully tested the oracle index compression on ECC5 environment for the following tables in a sandbox environment;
ppoix
pcl2
pcl4
In total I saved around 60GB in the tablespaces.
Before compression I started a payroll run to see what time this will take without compression.
After compression of the indexes I re-executed the payroll which took exactly the same time as without compression (2 hours). So no impact on performance.
Also did an update statistics in DB13 -> no impact
With brtools: force update of specific table -> no impact
So we are seriously thinking about to take this into production.
I have also looked at BI environment but concluded that there was nothing to gain.
Unfortunately our infocubes are well build meaning that the fact tables contains the actual data and the corresponding dimension tables only the surrogate IDu2019s (SIDu2019s).
Those dimension tables are actually very small (64k) and not suitable for index compression.
Next step will be some Workflow tables.
Fe:
SWW_CONT~0                   INDEX        PSAPFIN           26.583.040
SWPNODELOG~0                 INDEX        PSAPFIN           15.589.376
SWWLOGHIST~0                 INDEX        PSAPFIN           13.353.984
SWWLOGHIST~1                 INDEX        PSAPFIN            8.642.560
SWW_CONTOB~0                 INDEX        PSAPFIN            8.488.960
SWPSTEPLOG~0                 INDEX        PSAPFIN            6.808.576
SWW_CONTOB~A                 INDEX        PSAPFIN            6.707.200
SWWLOGHIST~2                 INDEX        PSAPFIN            6.507.520
SWW_WI2OBJ~Z01               INDEX        PSAPFIN            2.777.088
SWW_WI2OBJ~0                 INDEX        PSAPFIN            2.399.232
SWWWIHEAD~E                  INDEX        PSAPFIN            2.352.128
SWP_NODEWI~0                 INDEX        PSAPFIN            2.304.000
SWW_WI2OBJ~001               INDEX        PSAPFIN            2.289.664
SWWWIHEAD~A                  INDEX        PSAPFIN            2.144.256
SWPNODE~0                    INDEX        PSAPFIN            2.007.040
SWWWIRET~0                   INDEX        PSAPFIN            2.004.992
SWW_WI2OBJ~002               INDEX        PSAPFIN            1.907.712
If you would like to know, I can post the results on workflow tables (indexes) on ECC6 environment.
Please rewards some point if you like.
Regards,
Stephan van Loon

Update the base table

Hi experts help me,
I have one requirment
there have two machine(plant) fert1,fert2 each one have some materilas.
from one of the plant will be goining to stop(fert1).
than we need featch the issued material from fert1 in reverse order to store it than post the meterial into fert2 based on the production number.
Please help me,
THANKS advance
Moderator message: "spec dumping", please work yourself first on your requirement.
Edited by: Thomas Zloch on Oct 29, 2010 1:54 PM

Hi,
I'm not sure what you're asking in either question. It would help if you gave a specific example of what you want to do.
SowmyRaj wrote:
Hi Experts , I need help in two qurstions
1. How to update a view without modifying the base table ?You can't.
Views don't contain any data; they just query base tables.
You can change the definition of a view (CREATE OR REPLACE VIEW ...) so that it appears that the base table(s) have changed; that won't change the base tables.
2. How to write a file unix operating system in pl/sql ? is there any built in procedure is there ?The package utl_file has routines for working with files.

Making mass change to Oracle Apps base table

I have requirement where I have to do a mass updates/inserts to an Oracle Apps table (BOM_Inventory_Components). I have been told by my senior programmers that Oracle does not like direct updates or inserts to the Base tables in Oracle Apps.
Anyone knows of a standard practice of updating/inserting records into Base tables in Oracle Apps?

I have seen and done lot of projects where we do direct table update but we do have Metalink support and we do inform them and involve them into regours conference call and than we are proceding direct table update.
the trick is oracle always as package where you can fine related update procedure so by passing neccesary parameters you can update the table.
Regards
Prashant Pathak

Order by on a non-base table field

I want to order by on a non-base table field in a form. Can any body help how to do this in a form.
Thanks

Ramesh,
I am not sure of ver 4.5. But in v6i, I did something similar.
What I did was :-
1. Based the Block's datasource on a stored procedure and
not TABLE
I'm not sure if it can be achieved in 4.5. First check if the block data source can be based on a stored procedure.
Here's a sample code of what i did :-
/* Description : Using a stored procedure as a block datasource.
Author : Shailender Mehta
Create Or Replace PACKAGE my_datasource Is
/* Shailender Mehta */
TYPE outrec is RECORD (comp_id tbgp_gl_detail.comp_id%Type
,cc_id tbgp_gl_detail.cc_id%Type
,journal_no tbgp_gl_detail.journal_no%Type
,account_code tbgp_gl_detail.account_code%Type
,debit_amt tbgp_gl_detail.debit_amt%Type
,credit_amt tbgp_gl_detail.credit_amt%Type
,sort_order Number(1)
TYPE outcur is REF CURSOR RETURN outrec;
PROCEDURE outquery (resultset In Out outcur
,p_journalno In Number);
END;
Create Or Replace PACKAGE BODY my_datasource IS
PROCEDURE outquery(resultset In Out outcur
,p_journalno In Number)
Is
BEGIN
OPEN resultset FOR
SELECT comp_id
, cc_id
, journal_no
, account_code
, debit_amt
, credit_amt
, Decode(substr(account_code,6,1), 'g', 1,
'd', 2,
'b', 3,
'h', 4,
'f', 5,
'a', 6,
'c', 7, 8) sort_order
FROM tbgp_gl_detail
WHERE journal_no = p_journalno
ORDER BY 7;
END;
END;
Use the Block Data Wizard, which will guide you step by step what next to be done.
In my example, I'm sorting the resultset by the 6th character of the string Account Code.
In your case, you could join the main table by the one used in your POST-Query in the stored procedure and sort the resultset.
- Shailender -

Can DB polling be done on base tables directly?

Similar Messages

Maybe you are looking for