Can I add a new chapter page between existing pages?

I would like to divide the last chapter I've written into two chapters.  I didn't think of this at the time, now it seems logical.   I have added a new chapter page with photo template, it appears at the bottom of the "book navigation" pane, but I can't drag and drop it between the pages it needs to separate.  Do I need to erase 8 pages and begin again?  I hope not!

If you're used to fluid, non-linear editing, iBA can be quite the headache until you get in sync with how it expects us to work .
You may find it beneficial to experiment with throw-away books first, so that you find out what will/won't work for your content - that way you may reduce time wasted learning the hard way later. I find it's better to spend time rough drafting my content on paper, or in Pages, before laying it out via iBA. Once you get into the habit of linear editing, you'll have an easier time of it - I hope.
Good luck in any case.
Ken

Similar Messages

  • Can we add a new attachment to an existing SC from any other custom page in SoCo PO View

    Hi Experts,
    Need your expert advice on the below requirement.
    We have created a custom view in SoCo PO page. There we have a New custom view called Notes&attachement.which contains same value from Notes & attachment of Shopping Cart.
    We are updating existing Notes of SC by FM 'bbp_pd_sc_update' and same is reflected in SC of same item guid & same header guid.
    Similarly trying to add a new Attachment to already existing attachment. New attachment is reflected in custom page and the describe link is working perfectly. but if come out of SoCo page , lets say in SC the new added attachment is shown but display_url,phio_size etc are not stored properly in DB.
    in bbp_pd transaction every thing looks same for new and existing attachment. we are using same FM 'BBP_PD_SC_UPDATE' by passing new internal table of attachment in import statement. Even 'BBP_PROC_DOC_UPADTE' has same result that is attachment is partially updated.
    Suppose, SC has one attachment at the time of creation. then adding a new attachment in custom view of SoCo PO page then every thing works fine in SoCo PO page but out of that SoCo PO or in SC the newly added attachment is not properly updated.
    I have added mime_type,phio_size,disp_url,file_name,file_ext,ev_content of new attachment in existing attachment internal table and calling above FM for update.
    Can we  add new attachment outside SC to existing SC ? if yes , then how?
    Thanks,
    Partha

    Hi Partha,
    Please post this query in the category: SAP SRM. Your post currently shows up on the forum - SRM User Interface Add-on. As your query is not related to the new ad-on, you might not get as many responses in this forum as you would have if you had posted the query in the general SRM forum (http://scn.sap.com/community/srm).
    Hope this helps
    Cheers,
    Yateesh

  • I have an IPod touch and Itunes established on my computer.  Can I add my new IPhone4S to my existing ITunes and share libraries?  How do I add the phone?

    I have an established ITunes account using my IPod Touch.  How do I add my new IPhone 4S to my account and share my libraries between both devices?

    Plug it in and sync it.
    You can sync as many iphones/ipods/ipads as you like to one computer.

  • Can not add a new member to the existing log group.

    Dear all,
    I just want to multiplex the online redo log to different devices for security reason. I just have one member for each group. So I want to use this command to add a new member.
    alter database add logfile member '/u02/oracle/oradata/TEST/redo01.log' to ('/u01/app/oracle/oradata/TEST/redo01.log')
    or
    alter database add logfile member '/u02/oracle/oradata/TEST/redo01.log' to group 1.
    But both commands failed with error pasted below:
    ERROR at line 1:
    ORA-19510: failed to set size of 102400 blocks for file "/u02/oracle/oradata/TEST/redo01.log" (block size=512)
    ORA-27045: unable to close the file
    Linux-x86_64 Error: 5: Input/output error
    Additional information: 4
    Do you know what caused this problem?
    Thanks,
    Ricky

    I just want to multiplex the online redo log to different devices for security reason. I just have one member for each group. So I want to use this command to add a new member.Not a BAD idea.. :)
    ERROR at line 1:
    ORA-19510: failed to set size of 102400 blocks for file "/u02/oracle/oradata/TEST/redo01.log" (block size=512)
    ORA-27045: unable to close the file
    Linux-x86_64 Error: 5: Input/output error
    Additional information: 4It is running out of space. check the required space on mount point /u02 , if not you can create in another mount point as per your requirement.
    THanks

  • Is it possible to INSERT a blank page Between existing pages?  Everytime I try it inserts the page at the END of the document.

    Everytime I try it inserts the page at the END of the document.  The HELP is no help, and I can't find any other documentation on being able to do this.  Appreciate the feedback.  Thanks!  - ph

    AP,
    As Fruhulda notes, a Section Break is an Inline character that will move all text below it to the next page. With a combination of graphics and text, and with the graphics having the property of Object Causes Wrap turned on, you will get these apparently odd behaviors. This is why I often favor the Page Layout mode myself. As many experienced users will say, you can do anything in a WP doc that you can do in a PL doc, but in my opinion the WP features often get in the way of simple operation when graphics are involved.
    Glad you are on track now.
    Jerry

  • Add a new field to an existing Condition table

    How can I add a new field to an existing condition table?
    I have table 971 and I want to add INCOTERMS (INCO1) to this existing table but do not see how to add it.
    Thanks

    Hi Vicky,
        I dont think you can add new fields to the condition table once you have activated the condition table.
    SAP says you can only make limited changes to the condition table, like changing the description, fast entry screen, header and footer fields, but not able to add new fields to the table, and I think that is the correct approch or else for the same table you will have two sets of condition records.
    Please refer to the below link:
    http://help.sap.com/saphelp_erp60_sp/helpdata/en/de/7a8534c960a134e10000009b38f83b/frameset.htm
    What you can do is create a new condition table with additional field and assign this table before the currently used table in the access sequence.
    Hope this helps.
    Regards
    Raj

  • How can I add a new Template to My Templates in Pages? I've read most of the discussions on the subject but it doesn't work for me. By the time I reach the Templates folder, I only see templates for Numbers and not for Pages. Need help, please.  Thanks

    How can I add a new Template to My Templates in Pages? I've read most of the discussions on the subject but it doesn't work for me. By the time I reach the Templates folder, I only see templates for Numbers and not for Pages. Need help, please.  Thanks

    Si vous avez utilisé la commande Save As Template depuis Pages, il y a forcément un dossier
    iWork > Pages
    contenant Templates > My Templates
    comme il y a un dossier
    iWork > Numbers
    contenant Templates > My Templates
    Depuis le Finder, tapez cmd + f
    puis configurez la recherche comme sur cette recopie d'écran.
    puis lancez la recherche.
    Ainsi, vous allez trouver vos modèles personnalisés dans leur dossier.
    Chez moi, il y en a une kyrielle en dehors des dossiers standards parce que je renomme wxcvb.template quasiment tous mes documents Pages et wxcvb.nmbtemplate à peu près tous mes documents Numbers.
    Ainsi, quand je travaille sur un document, je ne suis pas ralenti par Autosave.
    Désolé mais je ne répondrai plus avant demain.
    Pour moi il est temps de dormir.
    Yvan KOENIG (VALLAURIS, France)  mercredi 23 janvier 2011 22:39:28
    iMac 21”5, i7, 2.8 GHz, 4 Gbytes, 1 Tbytes, mac OS X 10.6.8 and 10.7.2
    My iDisk is : <http://public.me.com/koenigyvan>
    Please : Search for questions similar to your own before submitting them to the community

  • When I add a new bookmark, and the (star) Page Bookmarked window appears - is there any way to expand the size of that window so that I can see my entire list of folders when adding a new bookmark to an existing folder?

    When I add a new bookmark, and the (star) Page Bookmarked window appears - is there any way to expand the size of that window so that I can see my entire list of folders when adding a new bookmark to an existing folder? The endless scrolling technique is far too tedious when trying to add a new bookmark, because the window is simply too tiny. Is there maybe a plug-in that will let me grab the corner of that window and re-size it? Thanks!

    I suggest you install the "Add Bookmark to Here2" extension, then you can expand the the list but you will not see the bookmark itself in the list if that is what you wanted. At the top you have three major folders you can select one of them and scroll up and down. Below that you have your most recently used folders and you can select one of them instead and scroll up and down. You can see the folder the bookmark is in -- they get added to the bottom
    If you really want to see the bookmark within the folder the same extension allows you to bring the bookmark to the folder from say the bookmarks sidebar that is why it is named as such. I use it but mainly i use the dialog.
    Please continue reading about bookmarks and some related extensions at
    * http://kb.mozillazine.org/Sorting_and_rearranging_bookmarks_-_Firefox
    * https://addons.mozilla.org/firefox/addon/add-bookmark-here-2/
    * http://dmcritchie.mvps.org/firefox/firefox.htm#addbookmarkhere2
    * http://dmcritchie.mvps.org/firefox/kws.htm
    If you are not using tags at all, you can remove a whole lot of confusion by removing them from the dialog via the extension.

  • How do I add a new chapter to iDVD without re-exporting from iMovie?

    I created a movie and after I finished the project in iDVD I realized that I had not included one chapter. This must be a common problem ... but I can't figure out how to update the chapter info to include this new chapter. I did get a message about the movie having been updated and did I want to update iDVD to include the update but this did not add the new chapter. What should I do?

    Did you already consult the help menu in iDVD?
    To set chapter markers in a movie:
    Select one or more movies in your project.
    Choose Advanced > "Create Chapter Markers for Movie."
    Type a number of minutes or click the up and down arrows to specify the frequency of chapter markers in the movie.
    Click OK.
    Once chapter markers are placed, you can't change them. If you decide you don't want to use them, don't create a scene selection menu. Chapter markers are not visible to viewers unless you make them accessible.
    Hope this is helpful
    SDMacuser

  • How can I add a new message(custom text message) to the holiday approval em

    How can I add a new message(custom text message) to the holiday approval email-notification sent to the manager?
    TIA

    The answer is 'not very easily', unless the information you want to display is the employee's leave balances. In 12.1.3 Oracle have delivered functionality that allows you to include the leave balances in the approval notifications out-the-box, ie, without customization.
    For any other information you're probably going to have to customize the standard delivered HRSSA workflow. Within this workflow, the Leave of Absence functionality uses the Notify Approver (Embedded) (HR_APPROVER_NTF) notification. The body of this notification is set to the Notify Approver (Embedded) (HR_NTF_EMBEDDED_REGION) attribute. This in turn defaults to:
    JSP:/OA_HTML/OA.jsp?OAFunc=-&HR_EMBEDDED_REGION-&NtfId=-&#NID-
    So essentially you can change the HR_APPROVER_NTF notification. The problem with changing this notification is that it's generic - it's used for all SSHR functions and not just Leave of Absence. That means you have to make other, more substantial, customizations to the workflow to ensure the changes you make only applies to LOA.
    The other option is to personalize the review page (ie, the region referenced in &HR_EMBEDDED_REGION) to include whatever messages you want. But that means they'll appear on the Review page and all LOA approval notifications and that might not be what you want.
    It's usually better to live with what Oracle deliver and find an alternative solution! What's the content of the message you want to include?

  • How can i add a new device

    how can i add a new device to Itunes

    Not sure what your post's title means, but you can only add a device to your iCloud account directly on the device e.g. log into the account in Settings > iCloud
    If your iPad isn't showing in your computer's iTunes when you connect it to your computer then is your iTunes up-to-date ? There is also some troubleshooting for a device not showing on these pages :
    PC : iPhone, iPad, or iPod touch not recognized in iTunes for Windows
    Mac : iOS: Device not recognized in iTunes for OS X - Apple Support

  • 0 down vote favorite        I would like to ask the following question. I am using mac os x 10.9 maverics me quicktime player version 10.3. Can I trim a video recording without having to press the pause or save it as a file? Or can I add a new recording t

    0 down vote  favorite  
    I would like to ask the following question. I am using mac os x 10.9 maverics me quicktime player version 10.3. Can I trim a video recording without having to press the pause or save it as a file? Or can I add a new recording to a video file? Thanks in advance

    Well,
    I tried the "Internet Recovery" option and finally saw Mac OS X Mountain Lion's install page but after waiting 7 hours when I just thought its going to start installing, I got another progress bar with 36 hours remining time to download "Additional Components" then after progressing 2-3 hours, it shows "Unable to write installation something..., Contact Apple Care"
    Then I accidently rebooted the machine and now it seems Internet Recovery don't work anymore, it shows "support.apple.com - 40 something!" error, and finally when I tried to reboot using Recovery HD, I found it's gone as-well!
    To be honest, I don't know what to do now, I am and dissapointed... also I do not have any Apple Store nearby, there is an authorized country reseller almost 650/km far away from my residents and they even charges too high (like $250) for doing such repairs (as per phone conversation)
    If anyone have any idea or anything to help me with, please do share- I'd be eternally grateful!

  • How to add a new column in between two other columns

    I need to add a new column in between two other existing columns. Does anyone know how to do that? The ALTER statement adds the column at the end. Can someone give an example.
    Thanks
    Murali
    null

    There is no simpler way of doing this because it is not strictly necessary: you can always see your data in the order you want simply by going SELECT col1, col2, col98, col4, etc. Thus the column order only matters when you execute SELECT * FROM...
    If that really is important enough to you you'll have to drop and re-create the table, for which there are a number of different strategies.
    Your final comment suggests that you don't retain your database build scripts. If you did then rebuilding your constraints would be painless. There is a lesson there. The good news is that if you have TOAD (download from www.quest.com) you can generate DDL scripts from your existing schema.
    HTH, APC

  • Elements 11 vs 13: how can I add a new place tag to my PSE13 database without using the wretched and totally inadequate map technology  that Elements 13 wants to impose.

    HI,
    I have recently installed Elements 13 having used Elements 11.0 successfully to build a database of 30,000 plus images indexed by place, people, and photo date. Elements 11 allowed me to add new places which are meaningful to me but which are a complete mystery to the mapping technology of Elements 13. For example some years ago I lived in London in a road called Argyle Road. In elements 11 I could enter the place tag as Argyle Road. In Elements 13 I am required to locate Argyle Road on the map, but the map presupposes that the Argyle Road I am referring to is in Ealing in West London. It is not!
      I now live in a place called Broadsands but the Elements 13 Map places this 0.5 miles away from what I would describe as Broadsands.
      So the question: how can I add a new place tag to my database without using the wretched and totally inadequate map technology  that Elements 13 wants to impose.

    Thank you for your quick response, BalusC. I really appreciate your answer.
    Yes, you are right. If I manually code the same amount of those components in the JSF pages instead of generating them dynamically, the server will still run out of memory. That is to say, JSF pages might not accommodate a great deal of concurrent visiting. If I upgrade the server to just allow 1,000 teachers making their own test papers at the same time, but when over 2,000 students take the same questionnaire simultaneously, the server will need another upgrading. So I have to do what you have told me, using JS+DOM instead of upgrading the server endlessly.
    Best Regards, Ailsa

  • Can I add a new phone user to my itunes account without overriding my phone data?, can I add a new phone user to my itunes account without overriding my phone data?

    Can I add a new phone user to my itunes account without overriding my phone data?

    Read this
    http://support.apple.com/kb/HT1495

Maybe you are looking for