Can not add a new member to the existing log group.

Dear all,
I just want to multiplex the online redo log to different devices for security reason. I just have one member for each group. So I want to use this command to add a new member.
alter database add logfile member '/u02/oracle/oradata/TEST/redo01.log' to ('/u01/app/oracle/oradata/TEST/redo01.log')
or
alter database add logfile member '/u02/oracle/oradata/TEST/redo01.log' to group 1.
But both commands failed with error pasted below:
ERROR at line 1:
ORA-19510: failed to set size of 102400 blocks for file "/u02/oracle/oradata/TEST/redo01.log" (block size=512)
ORA-27045: unable to close the file
Linux-x86_64 Error: 5: Input/output error
Additional information: 4
Do you know what caused this problem?
Thanks,
Ricky

I just want to multiplex the online redo log to different devices for security reason. I just have one member for each group. So I want to use this command to add a new member.Not a BAD idea.. :)
ERROR at line 1:
ORA-19510: failed to set size of 102400 blocks for file "/u02/oracle/oradata/TEST/redo01.log" (block size=512)
ORA-27045: unable to close the file
Linux-x86_64 Error: 5: Input/output error
Additional information: 4It is running out of space. check the required space on mount point /u02 , if not you can create in another mount point as per your requirement.
THanks

Similar Messages

  • Can not add my new printer to the print and scan preferences

    I have purchased a Canon Pixma MG5350 and try to connect it to my mac but with no results. I have installed all the drivers but can not add it to the print and scan preferences. I looked in Applications > Utilities > System Information > USB and it does not even show that it is connected. The printer comes without a USB so I bought a 5m USB 2.0 A to B cable and eventually something is wrong. Is the USB too long, not the right one or what is the problem?

    I have already got my refund for the cable! I tried a friends cable and everything works!

  • I can not add a new credit card to my iPad without having to block directly with the bank card I'm using.

    I can not add a new credit card to my iPad without having to block directly with the bank card I'm using.

    What does this mean..?
    Gaby0526 wrote:
    ...  without having to block directly with the bank card I'm using.
    Changing Account Information  >  http://support.apple.com/kb/HT1918
    Accepted forms of payment  >  http://support.apple.com/kb/HT5552
    If necessary...
    Contact iTunes Customer Service and request assistance
    Use this Link  >  Apple  Support  iTunes Store  Contact

  • Can not add a New appointment to a shared calendar in Outlook 2010, can only add a New Meeting.

    Hi
    I can not add a new appointment to a shared calendar in Outlook 2010. I can see the calendar and appointments in it (all appointments are marked as busy, the detail can not be seen. I want it to do this) and I can and a New meeting to the shared calendar
    but I can not add just an appointment.
    I do not want e-mail being sent to the owner of the shared calendar everytime I add something.
    When I view the appointment that im creating in the shared calendar the New appointment button is greyed out but the New meeting button is available.
    The permision on the shared calendar for the user is:
    Custom
    Read = none
    Write = create items, create subfolders, edit own
    delete = Own
    Other = folder visable
    Thanks
    contributor permission in outlook 2010 calendar does not work, I have given this as permision but issue is the same.  We currently connect to an exchange server 2003;

    Hi Cmrl,
    Does it happen when you create an appointment via OWA?
    Does it happen when you create an appointment via Outlook 2003?
    Do you have any mobile device?
    How many users encountered the issue, all users or some user?
    At first, I suggest you recreate outlook profile.
    At second, 
    use PFDAVAdmin
    to correct any problems found.

  • HT1296 I can not add a new contact to contact list from last calls

    I can not add a new contact to contact list from last calls

    That's nice.  Thanks for telling us.  Maybe you would actually like to ask a question????

  • Need to add 2 new columns to the existing table control of C223 transaction

    Hi ABAP Gurus,
    I have to do a screen enhancement for transaction C223.
    Below is the requirement:
    need to add 2 new columns to the existing table control of C223 transaction.
    there is no customer exits, screen exit or user exit present for this transaction C223, i have found one enhancement spot for this transaction.
    i dont have any idea how to do this in standard transaction C223, the table control in C223 saves the data to MKAL table and the table control uses the structure MKAL_EXPAND in the screen program.
    i have created an append structure for  the 2 fields to the standard table MKAL.
    Can anyone please suggest me how this can be done in standard screen C223, will the enhancement spot can be used to do this....
    please sugest...
    Thanks & Regards

    Hi Santosh,
    Thanks for the reply. I have looked into this Enhancement Spot CPFX_SCREEN_SET , inside this there is only one method INPUT_DISABLED having below parameters
    IM_MKAL     Importing     Type     MKAL                                                                                Production Version
    EX_MSGID     Exporting     Type     SY-MSGID                                                                                Messages, Message
    EX_MSGTY     Exporting     Type     SY-MSGTY                                                                                Messages, Message
    EX_MSGNO     Exporting     Type     SY-MSGNO                                                                                Messages, Message
    EX_MSGV1     Exporting     Type     SY-MSGV1                                                                                Messages, Message
    EX_MSGV2     Exporting     Type     SY-MSGV2                                                                                Messages, Message
    EX_MSGV3     Exporting     Type     SY-MSGV3                                                                                Messages, Message
    EX_MSGV4     Exporting     Type     SY-MSGV4                                                                                Messages, Message
    EX_INPUT_DISABLE     Exporting     Type     CHAR1                                                                                Display Only if X Was Set
    the BADI definition present here is a SAP internal so we cant implement the BADI , but we can created a enhancement spot implementation for this. as per my understanding on this the enhancement spot is only for making the table control fields display / change .  i dont think this can be used to add two new coloumns to C223 table control.
    I am not sure thats why seeking your help/valuable sugestion on this.
    Please provide your sugestion on this , so that i can come to conclusion on this issue.
    Thanks & Regards
    Siddhartha Mishra

  • How can i add a new function to the Basic IVI class vi's?

    I need to use the IVI vi's to control some instruments, let's say a DC Power Supply.
    Since there's a DC Power supplyclass, i can used those VI's but waht if one of the VI's does not contains all the functions that i need?. How can i add more functions to the IVI classes?. What do i need to do to add a new function to the iviFGen class?

    If you would like to try developing your own instrument driver (or modify the existing one), we have documentation, model instrument drivers, and driver templates to help at :
    http://www.ni.com/devzone/idnet/development.htm
    We also have a syndicate of third party vendors that specialize in National Instruments' products and services. Some of the vendors specialize in driver development. I would suggest contacting one of the Alliance members at:
    http://www.ni.com/alliance

  • Can I add a new trigger to the beginning instead of at the end of a blank composition widget?

    Hi guys,
    I am creating a photo gallery page using the Blank Composition widget. I want to be able to add new content regularly by adding new photos to the top (beginning) of the gallery so my newest photos show at the beggining of the gallery.
    Currently, the little + symbol to add another trigger only adds a new trigger to the right (bottom) of group of triggers, effectively putting newly added content to the back of the gallery instead of at the front. Am I able to get it to add a new trigger to the beginning of the group and have that trigger be the first in the group to display?
    All the widget's seem to display this same order behaviour, so I'm quite stuck on how to get around this. I've tried re-arranging the triggers, but that has become insanely cumbersome every time I want to add new photos to the beginning of the group and move the older ones further down the gallery order.
    Any help would be greatly appreciated with this, cheers, David.

    OK
    I'm a newbie.
    I have the same problem. I've looked at some recommended 3rd party widgets and they don't do what I want either.
    Another method would be to start a nabble.com blog and embed that in to Muse, but then the news would not be seen by web crawlers and benefit your ranking on your own page. (I think)
    This is a rubbish work around but, I'm going to add a new news widget every month. I only get 5-6 bits of news a month, so by adding a new widget above the last each time, that will push the old news down the page.
    Hope this helps someone.
    Jay

  • I can not add a wmv file to the library. It is not protected

    Can not add a video file to Itunes library and even when I try to open the video using "open with Itunes", Itunes start but instead of the video I see the music library

    iTunes cannot play nor convert WMV files. You'll need to use a third-party application to convert the video to a format iTunes can accept.
    http://support.apple.com/kb/HT2729
    Regards.

  • Can we add a new attachment to an existing SC from any other custom page in SoCo PO View

    Hi Experts,
    Need your expert advice on the below requirement.
    We have created a custom view in SoCo PO page. There we have a New custom view called Notes&attachement.which contains same value from Notes & attachment of Shopping Cart.
    We are updating existing Notes of SC by FM 'bbp_pd_sc_update' and same is reflected in SC of same item guid & same header guid.
    Similarly trying to add a new Attachment to already existing attachment. New attachment is reflected in custom page and the describe link is working perfectly. but if come out of SoCo page , lets say in SC the new added attachment is shown but display_url,phio_size etc are not stored properly in DB.
    in bbp_pd transaction every thing looks same for new and existing attachment. we are using same FM 'BBP_PD_SC_UPDATE' by passing new internal table of attachment in import statement. Even 'BBP_PROC_DOC_UPADTE' has same result that is attachment is partially updated.
    Suppose, SC has one attachment at the time of creation. then adding a new attachment in custom view of SoCo PO page then every thing works fine in SoCo PO page but out of that SoCo PO or in SC the newly added attachment is not properly updated.
    I have added mime_type,phio_size,disp_url,file_name,file_ext,ev_content of new attachment in existing attachment internal table and calling above FM for update.
    Can we  add new attachment outside SC to existing SC ? if yes , then how?
    Thanks,
    Partha

    Hi Partha,
    Please post this query in the category: SAP SRM. Your post currently shows up on the forum - SRM User Interface Add-on. As your query is not related to the new ad-on, you might not get as many responses in this forum as you would have if you had posted the query in the general SRM forum (http://scn.sap.com/community/srm).
    Hope this helps
    Cheers,
    Yateesh

  • I have lost the capability with the new upgrade to add a contact to favorites....the "add to favorites" is gone.  My contacts that I had added previously are still favorites...I just can not add a new one?????

    With the newest upgrade, I no longer have the button "add to favorites" ????   So How do I add a contact to favorites...all the contacts previously added still have the little blue star next to the number...but I can not find how to add another contact to favorites.

    Thanks that solved it for me...your awesome

  • How can you add a new rule in the inspector?

    I've grown very accustomed to the Chrome developer tools, and I've recently decided to try out Firefox.
    Best I can tell, you cannot add custom rules in the Firefox inspector tab. For instance, if I inspect the element on an image in Firefox, I am given all the defined styles (rules) for that element. I can, of course, edit those defined styles. However, it does not give me an option to add my own custom styles unless I jump over to the 'Style Editor' tab and write them in manually. This becomes a problem when I want to write in a quick :hover or a :first-child or reference any other selecter that's not already defined.
    In Chrome, not only do I add/remove/change styles directly in the Inspector, but it also saves a custom inspector stylesheet for me with all the changes I made.
    Chrome example: http://cl.ly/Wm56
    Firefox example: http://cl.ly/WmUP
    Is there any way to add custom styles directly from the inspector tab in Firefox?
    Thanks!

    You will notice an element {} item at the top of the Rules list in the right plane.
    You can click between the curly brackets {} to enter a new inline rule for this element.
    You can do this within other rules {} as well.
    Type the colon to separate the property name and value.
    That is easier than adding a style attribute in the left pane or editing a style sheet file.
    That should work as well as rules added this way show as a style rule.
    *https://developer.mozilla.org/Tools/Page_Inspector

  • I Can not add a new playlist to iphone5 or sync playlist's between imac and iphone5

    I have OS X Mavericks on my imac and  70.03 on my iphone5
    I bought some new songs from itunes and made a playlist on my imac itunes
    I plugged my phone to my imac and tried to add the new playlist to my phone but it wouldnt be added
    Furthermore,I clicked iphone on my itunes on my imac and tred to remove (unclick) all playlists but after I pushed synce and it looked like it was going to work,all the playlisys stayed on the iphone
    Now I cant add or remove playists from my iphone
    When I unclick all the playlists,it says I have 7 Gs on my phone,after the syncing i says I have 2 Gs which means its reading the iphone and the small amount of space left because of the playlists(which I can not remove)
    I just updated my iphone5 and my imac
    Im in Canada and I think the system is the same around the world
    Any sugegstions folks ?

    also,I have itunes 11.1.2

  • How can I add a new section to the beginning of a song project?

    I've been trying GarageBand on my new iPad 3 as a practice aid. I laid down some guitar cords, then dupped some sections until I got a whole 64 bar song. Now, how the heck do I add a couple of intro bars? If I try to add a new two bar section, it always stays stuck at the song end. If I stretch section 1 by a couple bars, it adds the bars at the end of section 1, repeating the last cords, not very useful.

    If you open the section menu there is a tool consisting of three parallel lines. Tap this to reorder the sections.
    tt2

  • Windows SBS 2011 - I can't add a new user through the SBS Console

    I have recently installed SBS 2011 and this is my first install of SBS since 2003.
    After the installation I went to the SBS Console to add a new user and when I select 'Add a new user account' and base it on the Standard User account i get a message saying 'Add a New User Account failed', when i view the details for this it says "The User
    Account cannot be added. Ensure that the Active Directory Domain Services service is running....
    I searched the web for this and found the following which was not applicable http://support.microsoft.com/kb/958890 
    I then resorted to adding the users via AD Users and Computers and the modifying the value in the ADSI for msSBSCreationState to 'Created' and then it appeared in the console, i then used the console to change the user role for this account to Standard User.
    But when i now click on the "Edit User Account Properties" action i get a pop up message from SBS Server saying "There is no such object on the server".
    Any ideas on ow to fix this broken console would be appreciated.
    Thanks,
    Simon

    Hi, using default names i AD will help. For everyone who lost original. grr... 
    http://i.techrepublic.com.com/blogs/february-2011-wstips-tip1-figa.jpg?tag=content;siu-container

Maybe you are looking for