Can I Animate Individual Characters in a Text Block Using the Wiggle Expression?

I'm new to After Express and just diving in to expressions. I was trying to figure out if there was a simple way to use the wiggle expression in a way that it would wiggle individual characters in a text block independently of each other.
Definitely appreciate any help.

Did you try the Wiggly Selector? Alternatively, you could add an Expression Selector and add and Amount expression like this:
seedRandom(textIndex,true);
wiggle(1,100)
Dan

Similar Messages

How can I add a new message(custom text message) to the holiday approval em

How can I add a new message(custom text message) to the holiday approval email-notification sent to the manager?
TIA

The answer is 'not very easily', unless the information you want to display is the employee's leave balances. In 12.1.3 Oracle have delivered functionality that allows you to include the leave balances in the approval notifications out-the-box, ie, without customization.
For any other information you're probably going to have to customize the standard delivered HRSSA workflow. Within this workflow, the Leave of Absence functionality uses the Notify Approver (Embedded) (HR_APPROVER_NTF) notification. The body of this notification is set to the Notify Approver (Embedded) (HR_NTF_EMBEDDED_REGION) attribute. This in turn defaults to:
JSP:/OA_HTML/OA.jsp?OAFunc=-&HR_EMBEDDED_REGION-&NtfId=-&#NID-
So essentially you can change the HR_APPROVER_NTF notification. The problem with changing this notification is that it's generic - it's used for all SSHR functions and not just Leave of Absence. That means you have to make other, more substantial, customizations to the workflow to ensure the changes you make only applies to LOA.
The other option is to personalize the review page (ie, the region referenced in &HR_EMBEDDED_REGION) to include whatever messages you want. But that means they'll appear on the Review page and all LOA approval notifications and that might not be what you want.
It's usually better to live with what Oracle deliver and find an alternative solution! What's the content of the message you want to include?

Can I connect my iPhone to my Mac and use the Mac keyboard to write texts

Can I connect my iPhone to my Mac and use the Mac keyboard to write texts?

No.
You can connect a bluetooth keyboard to your iPhone to write texts.

Why can't I "load earlier messages" via Text Message since the OS 5 upgrade? They will not load!

why can't I "load earlier messages" via Text Message since the OS 5 upgrade? They will not load! Nor can I forward them to my email like I used to be able to do prior to the OS upgrade. Please advise.

"Why can't I load iOS 4.3.5 onto my older (2nd gen?) iPod touch? "
Beacuse it does not support the new software. 2nd gen can only go to 4.2.1
Identifying iPod models
If you have a second gen, then you should be able to get 4.2.1. What computer OS do you have? What version of Itunes?

How can i print a full page of mailing labels using the same contact in numerous times/my mailing address

how can i print out a full sheet of labels using the same contact info numerous times, mailing labels

Are you using DesignPro from Avery? You should.
It gives you the option to print individual labels or all the same:

Is it possible to send a text message using the UDP protocol?

Support doc
http://www.adobe.com/support/director/multiuser/using_udp/using_udp02.html
says to use the following format with connectToNetServer:
errCode =
gMultiuserInstance.connectToNetServer([#remoteAddress:
"chatServer.myCompany.com", #logonInfo: [#userID: "Bob",
#password:
"MySecret", #movieID: "Tech Chat"], #mode: #smus,
#localUDPPort: 1627,
#localAddress: "123.45.67.89", #remoteTCPPort: 1626])
But if I change the mode to #text, it still sends out
messages as smus.
In fact, if I leave out the UDP parameters altogether but
still use the
list parameters for connectToNetServer, it still always sends
as smus.
Sends as smus:
errCode =
gMultiuserInstance.connectToNetServer([#remoteAddress:
"chatServer.myCompany.com", #logonInfo: [#userID: "Bob",
#password:
"MySecret", #movieID: "Tech Chat"], #mode: #text,
#localUDPPort: 1627,
#localAddress: "123.45.67.89", #remoteTCPPort: 1626])
Sends as smus:
errCode =
gMultiuserInstance.connectToNetServer([#remoteAddress:
"chatServer.myCompany.com", #logonInfo: [#userID: "Bob",
#password:
"MySecret", #movieID: "Tech Chat"], #mode: #text])
Only the string parameter method can be made to send text
messages.
Sends as text:
errCode = gMultiuserInstance.connectToNetServer("Bob",
"MySecret",
"chatServer.myCompany.com", 1626, "Tech Chat", 1)
Am I missing something? Is this a known issue? Anyone have a
work around?
-Jeremy

Drat!
Thanks for the answer though.
alchemist wrote:
> The multiuserXtra supports either tcp text or tcp smus
connections.
> The ability to send udp messages was an expansion to the
original mus
> protocol/xtra and is valid only for muXtra instances
already connected in
> smus mode.
> So, if you are asking if you can create a udp instance
and use it at will
> (exchange udp messages with some remote udp socket),
then the answer is no.
>
>
> "Jeremy Aker" <[email protected]> wrote in message
> news:[email protected]...
>> I'm really sorry that I wasn't clear enough. I'll
repeat the questions
>> more concisely.
>> Is it possible to send a text message using the UDP
protocol? If so, how?
>> Is the bug I described in my original message (see
below) really a bug or
>> am I doing something wrong?
>> If it's a bug, does anyone have a work around?
>>
>> alchemist wrote:
>>> And the question is?
>>>
>>> "Jeremy Aker" <[email protected]> wrote in
message
>>> news:[email protected]...
>>>> Support doc
>>>>
http://www.adobe.com/support/director/multiuser/using_udp/using_udp02.html
>>>> says to use the following format with
connectToNetServer:
>>>> errCode =
gMultiuserInstance.connectToNetServer([#remoteAddress:
>>>> "chatServer.myCompany.com", #logonInfo:
[#userID: "Bob", #password:
>>>> "MySecret", #movieID: "Tech Chat"], #mode:
#smus, #localUDPPort: 1627,
>>>> #localAddress: "123.45.67.89",
#remoteTCPPort: 1626])
>>>>
>>>> But if I change the mode to #text, it still
sends out messages as smus.
>>>> In fact, if I leave out the UDP parameters
altogether but still use the
>>>> list parameters for connectToNetServer, it
still always sends as smus.
>>>>
>>>> Sends as smus:
>>>> errCode =
gMultiuserInstance.connectToNetServer([#remoteAddress:
>>>> "chatServer.myCompany.com", #logonInfo:
[#userID: "Bob", #password:
>>>> "MySecret", #movieID: "Tech Chat"], #mode:
#text, #localUDPPort: 1627,
>>>> #localAddress: "123.45.67.89",
#remoteTCPPort: 1626])
>>>>
>>>> Sends as smus:
>>>> errCode =
gMultiuserInstance.connectToNetServer([#remoteAddress:
>>>> "chatServer.myCompany.com", #logonInfo:
[#userID: "Bob", #password:
>>>> "MySecret", #movieID: "Tech Chat"], #mode:
#text])
>>>>
>>>> Only the string parameter method can be made
to send text messages.
>>>> Sends as text:
>>>> errCode =
gMultiuserInstance.connectToNetServer("Bob", "MySecret",
>>>> "chatServer.myCompany.com", 1626, "Tech
Chat", 1)
>>>>
>>>> Am I missing something? Is this a known
issue? Anyone have a work
>>>> around?
>>>>
>>>> -Jeremy
>

Can you use the Airport Express A1264 as an AP and a DHCP server at the same time?

Can you use the Airport Express A1264 as an Access Point and a DHCP server at the same time?
I would like to use it as a DHCP server and AP at the same time in my LAN (no internet, just local machines through a few switches). I was lead to belive this could be the case from a few networking friends that haven't been friendly enough to help me out setting it up.

I need it to act as a dLink/Cisco/Linksys/etc basic wifi router, in the fact that you can access it via wifi, and it will spit out DHCP addresses (192.168.1.xxx) to everything wired downstream of it.
I want to simultaniously provide a Wifi connection and a LAN connection at the same time
Thanks,
BRad

How can i print my files from mi iphone 5 throught the airport express?

How can i print my files from mi iphone 5 throught the airport express?? i have the last iOS version installed and also the last firmware version of the printer. the printer is already connected to the USB airport express and when i look for printers in airprinter there is no printer found. i have an HP LASERJET P1606dn(i think that is supported by the airprinter).

In order to function with AirPrint, a printer must connect to the network wirelessly.
Even if you have an AirPrint compatible printer, iOS devices will not be able to print to the printer when it is connected via USB.
So, you have two options:
1) Reconfigure the printer to connect to the network using wireless only and the iOS devices should be able to print that way....assuming that you have up to date drivers for the printer installed.
2) Leave the printer connected via USB and then use a third party App like Printopia installed on your Mac as a "workaround" to (hopefully) allow the iOS to device to be able to print. If you want to give this a try, there is a free trial for Printopia, so you will know if it will work before you buy. You must have a Mac running on the network in order for Printopia to function correctly.
Printopia - AirPrint to Any Printer - Print from iPad - Print from iPhone ...

Can I connect multiple Mac's using the Airport Express?

As subject. I have got an Intel iMac and a MacBook. Can I connect them using the Airport Express? Or in another word, to create a network among them that I can see the other Mac on one Mac?
Sorry, if I raised a silly question. But really like to know.
Many thanks in advance.
Gary

Can I connect them using the Airport Express?
Yes
Or in another word, to create a network among them that I can see the other Mac on one Mac?
Yes

Crystal Report XI: Can you write your query in SQL instead of using the GUI

Hello
In crystal report version XI, can you write your query in sqlplus and then use the crystal report designer to build your report instead of using the GUI . I would like to be able to go database and show sql query and open that query and make changes directly there, is that possible on this version, if yes is there a setting somewhere? Please let me know.
Thank you
alpha

Moved to Database forum.
No you can no longer modify the SQL directly. Use a Command Object to enter the SQL directly.
Thank you
Don

Hi am having problems with iTunes,I have all my music on my 4s but I bought the iPhone 5 today.us there any way that I can transfer music over to my new phone without using the library?as it doesn't seem to be on my PCM anymore.

Hi am having problems with iTunes,I have all my music on my 4s but I bought the iPhone 5 today.is there any way that I can transfer music over to my new phone without using the library?as it doesn't seem to be on my PC anymore.i reset my pc and save my iTunes to a hard drive but can't access it.Need help please

" When I did this, my library showed all the music I have "purchased" from itunes but did not have the music that I downloaded a long time ago through itunes from my old CDs."
Correct.
" How can I get that music to show up in my library now on my new computer? "
Copy it from your old computer or your backup copy of your old computer.
The sync is one way - computer to ipod.

Received adobe photoshop elements 12/adobe premiere elements 12 when I purchased a MacBook Pro. The macBook Pro does not have a DVD player it is sold separately. To install the program can I download a free trial version and then use the serial numb

Received adobe photoshop elements 12/adobe premiere elements 12 when I purchased a MacBook Pro. The macBook Pro does not have a DVD player it is sold separately. To install the program can I download a free trial version and then use the serial numbers from the set I received?

yes, that's exactly what you should do,
Downloads available:
Suites and Programs: CC | CS6 | CS5.5 | CS5 | CS4 | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 12 | 11, 10 | 9, 8, 7
Photoshop Elements: 12 | 11, 10 | 9,8,7
Lightroom: 5 | 4 | 3
Captivate: 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

Can i use the airport express in my hotel with wired connection?

I'm going to be traveling quite a bit coming up and staying in hotels with wired internet connections in the room. Can i use the airport express to connect with the hotel's internet connection and then my ipad and/or iphone 4S? I'm new to Apple products so will certainly appreciate any info that may help. Thank you!

You will need to have AirPort Utility installed on the iPad and/or iPhone. It is free on the App Store
App Store - AirPort Utility
Connect the AirPort Express 802.11n to the hotel Ethernet jack using an Ethernet cable
Power up the AirPort Express and wait 40-45 seconds
Tap Settings, then tap Wi-Fi on the iPad
Tap the AirPort Express under the heading of Set up an AirPort Base Station
AirPort Utility will take a moment to to analyze the connection and then you can proceed with the easy guided setup
Once the AirPort Express is configured, you should not have to set it up again at the next hotel. But, you could if you want to.

I can disable one of my MacBook's two CPUs using the CPUPalette application. How can I do it under control of a script?

I can disable one of my MacBook's two processors using the CPUPalette application. How can I do it under control of a script?
I want to do this because the MacBook is overheating. I will soon get it repaired, but in the meantime, disabling CPU 2 is effective at preventing overheating. Sadly CPUPalette is not scriptable, and it won't remember its setting after the computer is restarted.
Would it be worth learning about the relevant Darwin API (supposing there is one) and writing a small command-line program for the job? I am an experienced developer of software using Standard C.
Comments appreciated.
Dave

i wonder if there is a key that is stuck cause whenever i try to turn it on again after the 60 minute lockout, it says that the password was incorrect and i am locked out for another 60 minutes

How can you sync ipad 2 photos to pc not using the cable or icloud sync?

How can you sync ipad 2 photos to pc not using the cable or icloud sync? Is there a way to do this via wi-fi network, How can you sync ipad 2 photos to pc not using the cable or icloud sync? Is there a way to do this via wi-fi network

Thanks for that, that was my first suggestion but he wants to not email either. His problem is he used his old nokia to do it and it was fine, now anything other than that he thinks is too much hassle.

Can I Animate Individual Characters in a Text Block Using the Wiggle Expression?

Similar Messages

Maybe you are looking for