Can I automate a VI to test hardware through CAN with some sort of script?

I am trying to automate some hardware testing over the CAN bus. I have started a basic VI that I can manually run these tests, but there are testing scripts available to me and I was wondering if there is a way to import some sort of scripts (or similar) into LABView to automatically run my VI to perform the test. I've done some searches, but looking for scripting only comes up with MathScript that MATLAB related information.
Thanks for the help.

stupidlogic wrote:
Thank you very much for the help. To be honest, I'm new to LabVIEW development and so I don't have any experience in importing scripts whatsoever. Assuming I have the script written in the suggested format...
Do I keep it saved as a .xls?
What subVI block do I import it into LabVIEW with?
Also, I haven't looked at every script I'll be dealing with (only a couple) and therefore, I don't know how complex it may get. Do you know where I can access some resources on learning to use TestStand? I've never used it before. Even just answering the basic, what does it do/how does it work would be helpful.
Once again, I appreciate all the assistance.
We may be calling it as script,but to the core,you are developing an appication to read excel sheet,your logic should segragate each steps action and you should have LabVIEW code wherever an action is required. If you are planning to do this task in LabVIEW, you need following steps to finish.
VI to read your excel sheet and format it to a 2-Dimensional array(Format the array to remove unnecesary characters).
A state machine(code architecture) which will be guided as per the states in your excel sheet.
A hardware handling loop to generate and acquire data for your main code(state machine).
Use CAN Channel API in case you have a defined CAN dbc file.
If no dbc file, go for frame API.
In case you are using TestStand, you need go for an architecture where your CAN periodic data transmission is taken care using LabVIEW.
Honestly it's not the task of a novice LabVIEW\TestStand programmer if you have less time ro learn. If you provide your e-mail address, I can send you a scaled down code after removing proprietary stuff.
Following link is an introductuction to Teststand:
http://zone.ni.com/devzone/cda/tut/p/id/6073
Regarding availability of resources to learn LabVIEW and TestStand,Can any one who is following this thread can suggest any materials ?

Similar Messages

I just bought an iPod touch 4th generation 8GB for $199.99 but then when the iPod touch 5th generation came out, the 4th generation was still $199.99, but for a whole 16GB. Is there a way I can get some sort of free space?

I just bought an iPod touch 4th generation 8GB for $199.99 but then when the iPod touch 5th generation came out, the 4th generation was still $199.99, but for a whole 16GB. Is there a way I can get some sort of free space?

If "just" is less than 14 days, you can return your iPod to Apple for a full refund.

Error while testing Adapter through RWB with payload

Hi all,
While testing Adapter engine through RWB with payload, i get the below error
Error while sending message: com.sap.aii.af.ra.ms.api.ConfigException: ConfigException in XI protocol handler. Failed to determine a receiver agreement for the given message. Root cause: com.sap.aii.af.service.cpa.impl.exception.CPALookupException: Couldn't retrieve outbound binding for the given P/S/A values: FP=;TP=;FS=ec6clnt001;TS=com_avaya_java_bs;AN=StartNotification_MI_sync;ANS=http://www.tcs.com/sap/xi/AVAYAPoC;"
Can any body please suggest the possible reason and solution for the same.
Regrads,
Kulwant

Hi
verify the receiver agreement and also check it out whether receiver message interface is configured properly or not?
or
open ID and goto tools tab in that click on
test configuration by providing your Business service and interface details along with the payload it displays the error message.
regards
Suryanarayana

I have a mac book pro i got about three months ago i know that it has been compromised with some sort of key loger and there for shur using remote desktop client! ill go in delete a bunch of files thy will repute them back in there and make it so i can re

im very new to computers but very fast learner and very mechenacal but i cant spell my way out of a wet paper bag! lol i receved this macbook pro runing lion 10.7.5 *** a gift slash i paid for it means the most to me its my babie someone has took it apon themselfs to put a keyloger on it been moving files opening accounts in my name basikly identy theft the did not expect me to catch on this fast when i first got it i dident even now ho to use the mouse pad but been real fortinat i have to the point i know the operating systems realy good but little things still learning iv overloded this thing twice now and brout it back pluse the last time i shute it down trying to get ride of owes so ever on hear i know it sounds crazy but have figuerd out what apps there useing and can revirbalize it back to some one kinda lol remind you im an idiot on computers lol the changing source cods useing key loger of some sort and remote deskstop conection, and a app to watch and record it on there iphone!last time i had coach reboot it i beged him for the start up disk he works for dell tride to tell him in the begining but dident know unuff to verbilize it to him pluse the terminoligies but i have been consuned buy it need some help to file in dark sposts on knolige and if rebooting my mackbook pro is the way to go got a lot of apps from coach dont want to lose im a poorbaserd thats whuy iv been avioding this at all cost plose i dont know if what i got for start up cd is right i was reading you need i desk please i need a bad *** coputer haker iv done all the simpel stuff some of the hard stuff gotten so close but olmst screwd up funkshons "systems preferences plans and framwork plains trying to get rid of this probelem no im not loosing it thats why i need some one who knows what there doing and is up for a challinge sorry about the spelling its bad i know but im only kinda dump lol pretty smart actully whent from be a compleat dump *** on computers to being abel to show some of my would be computer savey friends some tricks and how to do things, really still dump when it comes to windows but its kinda like appel,got lots of quistins like how afer all i done and coach even reboot ti for me (not useing cd but hard drives to reboot so id have apps that cost lot of money on it but cought him right in the middel of moving and i ended up getting lion 10.7.5 insed of having mountin lion 10.8.5 yes it was a big deference too miss mountin lion so much pretty bumed out that this person has done this to me kinda know who it is but cant prove it plese help ill do whatever....

Hi
Level 2 posters and Above can report various posts.
When they do so they have various options that they can attribute as the issue.
I have reported your post.
I found the one block of text very difficult to read.
9:36 PM Monday; January 28, 2013
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 iMac 2.5Ghz 5i 2011 (Mountain Lion 10.8.2)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad
"Limit the Logs to the Bits above Binary Images."  No, Seriously

I recently opened an email with some sort of virus and now I cannot forward, reply, send emails or view you tubes only with firefox. Can you help?

I recently viewed an email and received some sort of virus. Only in the email address where I view in infected email and only when using Firefox do I have a problem. When using the email address I can no longer send emails, reply to emails or forward emails. I can no longer view You Tubes when using FirefoxI. I can send emails, reply, and forward emails and view You Tubes when using internet explorer. I do not have this problem when using another computer. I only have the problem described when using Firefox with the computer which was infected. I prefer Firefox so can you please guide me in a direction to address the problem.
Phil

thx for your response. are saying websites such as hotmail and yahoo mail detect that they are being accessed via firefox and turn off the JavaScript that makes hot links? really? additionally, i have friends with firefox in which hyperlinks stay active when they are copied and pasted.
was the "Make Link" add-on you posted supposed to fix the problem? i downloaded it, but i don't know where the "context menu" is that is supposed to help me. how to i view this context window now that i have downloaded the add-on?

I need an arrow or some sort of icon that points and moves to alert the website user to scroll down. Are there such widgets or is there a method to make an image move on its own. Also, how to get my muse webpage to automatically scroll down?

I need an arrow or some sort of icon that points and moves to alert the website user to scroll down. Are there such widgets or is there a method to make an image move on its own. Also, how to get my muse webpage to automatically scroll down?

Thank you for your help, but I believe my questions remains unanswered -- mainly, because my English isn't the good.
Here's what I am asking:
1. I need something that is animated that blinks or flashes to alert the viewer to scroll down the page. I would put the wording: Scroll Down for more (and then an arrow blinks or gently moves up and down to alert the user to move down).
2. is there a way that the entire homepage on it's own moves downward?
Sorry for my poor English.
From: The Arthematics <[email protected]>
To: preston reed <[email protected]>
Sent: Tuesday, February 24, 2015 9:42 PM
Subject: I need an arrow or some sort of icon that points and moves to alert the website user to scroll down. Are there such widgets or is there a method to make an image move on its own. Also, how to get my muse webpage to automatically scroll down?
I need an arrow or some sort of icon that points and moves to alert the website user to scroll down. Are there such widgets or is there a method to make an image move on its own. Also, how to get my muse webpage to automatically scroll down?
created by The Arthematics in Help with using Adobe Muse CC - View the full discussionIf I understood correctly. You can place arrows on each section of the page and use "fade-in" and "fade-out". And maybe you want this widget Anchor + – Adobe Muse Widget Directory to automatically scroll down. If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7227429#7227429 and clicking ‘Correct’ below the answer Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7227429#7227429 To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following" Start a new discussion in Help with using Adobe Muse CC by email or at Adobe Community For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

How to test hardware on an old MacBook Pro that is slowing down.

I have the very first-gen MacBook Pro 2.0gHz Core Duo, 2gb ram. I have been using this laptop as my primary since I got it, mostly for development work (Java, Objective-C, Web, etc), but also email, general web surfing, and the occational game (although, not in a while).
Recently, I noticed things were starting to "slow down". Well, not slow down so much as things would get long pauses. For instance, I hit a site in Google Chrome, and the app sits there for like 20-30sec of longer, as if the window is frozen, then *poof*, it draws the page. Sometime, Chrome will even pop up asking if I want to kill the page. It is not the only application that seems to be suffering from this, I just spend a LOT of time on the web, so I tend to notice it much more.
Even more recently, my SpringSource Tool Suite (STS, a custom Eclipse with a bunch of SpringSource plugins) started acting up too. Mostly when I start the Roo Shell and execute a command, STS (read Eclipse) will show the command as "executing", but it seemed to never run. I thought it was maybe a problem with STS or the Roo Shell plugin, but yesterday I ran something as a test, then got a phone call and didn't come back for some time. To my surprise after more than 40min of just sitting there the command ran. Once it ran, it ran in full, normal speed (the command I ran was to rebuild the Eclipse project files using Maven). So, what I thought was frozen was merely paused for a long period of time, just like what I was seeing in Chrome.
So, this has lead me to believe I either have some sort of hardware issue, some sort of heat issue (I have seen this on Wintel laptops where the processor "speed steps" down to almost 33mHz), or some sort of software issue. I really don't want to have to re-install OS X, if I can avoid it. I did boot off the original disks that came with my laptop and ran the Hardware Test, but it came back with no errors. I have iStat Pro installed as well, and the fan speeds are usually around 1800-2000rpm, sometimes jumping to 4000+rpm. CPU tempuratures report around 151º. I also ran the Disk Utility off my 10.6 disks. I do know that my DVD burner no longer burns disks, but it hasn't for more than a year.
Laptop specs:
- MacBook Pro, Model MacBookPro1,1
- OS X 10.6.8
- 2.0gHz Core Duo w/ 2gb DDR2 RAM
- Toshiba MK3252GSX 320gb HDD (replacement for factory 120gb HDD over 1.5yrs ago due to space issues)
- I recently replaced the battery, as the old one had expanded. I use the laptop on wall power 99% of the time.
Thanks,
Mike Bauer

As mentioned above, I did do this. What I am not so certain is how intensive this test is. Stated another way: If this was ran and passed 100%, does this mean everything on my laptop is 100% functional, like the fans, processor, cooling, memory, etc? The drive also checked out when I did the Disk Utility from the 10.6 install CDs, and the S.M.A.R.T. check indicates no disk errors.
Maybe I should take it into a Genius and have them look at it. Just not sure how much that will cost me, and its an old laptop, so I don't want to put too much into it.

Hardware test bypassed during startup with yosemity

I have a mid 2007 20" iMac that I just rebuilt with a new 1 TB hard drive and 4GB of ram. Afterwards I upgraded to Yosemity 10.10.1. Today (3 days latter) it froze up, tried everything but had to hold power button in to shutdown. After restarting I tried doing the hardware test thats in my operator's manual holding the "D" key during power up. It was bypassed and opened straight to my desktop. Can I perform a hardware test with the new operating system?

That old AHT requires that you boot the computer from the AHT disc that came with your computer when it was new.
You might look at this article for how to get the old method back: Get Apple Hardware Test Boot Mode Back on Some OS X Lion Macs.

Is there a way to create hyplinks in documents automatically with firefox, as you can with IE?

Is there a way to create hyperlinks "automatically with Firefox, as you can with IE (with, for example, Ctrl + K, then go to the website, then back to the document, and it automatically populates the url)?

If you create the folders as a child within the main pictures folder, then they will show up in the app separately. I have many folders with pictures in.
You will need to move the photos manually - they will automatically go in the Camera folder.
Hope that helps.
Love Me - Love My BlackBerry
Z10 OS Version: 10.0.10.690
Z10 Software Release: 10.10.90
PlayBook - 2.1.0.1526

Can anyone recommend a portable USB 3.0 drive with hardware encryption, compatible with OSX and Windows 7. I need it for my MacBook Pro 13", 2012, running Mountain Lion

Can anyone recommend a portable USB 3.0 drive with hardware encryption, compatible with OSX Mountain Lion and Windows 7. I need it for my MacBook Pro 13”, 2012, running Mountain Lion & Windows 7 Ultimate - BootCamp. I’ve heard that the Buffalo MiniStation Encryption does not work with OSX, is that true..? I'd like it to work with both operating systems, using the built in hardware encryption. Thanks

This article may help: A flashing question mark appears when you start your Mac.

Moving a drive with OSX to another computer? take it out of my Mac pro laptop and into my mac mini. can with be done with no OS/Hardware issues?

moving a drive with OSX to another computer? take it out of my Mac pro laptop and into my mac mini. can with be done with no OS/Hardware issues?

babowa wrote:
Thanks; however, I was really referring to this: if it is preinstalled on a Mac, I believe the license is for that computer only (unlike an MAS purchased version which can be used on any Mac owned). Has that requirement changed?
At this moment, that's correct. The OS X license included with a Mac can only be used with that Mac. However, in the case the OP has purchased OS X Mountain Lion in the past, this may change

How can I stop receiving email automatically from the community when they have issues with there problems regarding the apple products.

How can I stop receiving email automatically from the community when they have issues with there problems regarding the apple products.

Click here for the instructions on stopping the emails.
(85713)

How do you start the hardware test on an imac with bluetooth keyboard

How do you start the apple hardware test on an imac with a bluetooth keyboard as the instructions is to press the D key whilst restarting? And of course the imac cant see the keyboard whilst booting up as the bluetooth connection has yet to be established

Have you tried following the directions for running it from the DVD? The instructions are on the Hardware Test link.If you are correct and it cannot due to the wireless keyboard not making a connection you will need to borrow a wired USB keyboard.

Any suggession on Tools for Performance testing of application designed for Blackberry phones.. which can get some details on CPU usage, memory, response time?? any help on the same is much appriciated.

Hi Team,
Any suggession on Tools for Performance testing of application designed for Blackberry phones.. which can get some details on CPU usage, memory, response time?? any help on the same is much appriciated.
Thank You,
Best Regards,
neeraj

Hi Team,
Any suggession on Tools for Performance testing of application designed for Blackberry phones.. which can get some details on CPU usage, memory, response time?? any help on the same is much appriciated.
Thank You,
Best Regards,
neeraj

Testing hardware failure

We're having a discussion concerning how well different hardware/OS combinations will recover from failed hardware and wanted to see what would happen if a DIMM failed. After rigging the lid open on a Sunfire 4200M, pulling a DIMM brought the system down immediately.
I don't believe that's the same thing that would happen if a DIMM failed, instead possibly just the board sensing an intrusion of some sort, similar to the lid being opened. Where would one look in the documentation to prove/disprove this theory? I don't see any messages in logging nor was there a crash file to look over.
thanks in advance

When I see a DIMM fail this is what the OS tells me:
Dec 20 20:16:07 sc09-g2 fmd: [ID 441519 daemon.error] SUNW-MSG-ID: SUN4U-8000-35
, TYPE: Fault, VER: 1, SEVERITY: Critical
Dec 20 20:16:07 sc09-g2 EVENT-TIME: Thu Dec 20 20:16:07 EST 2007
Dec 20 20:16:07 sc09-g2 PLATFORM: SUNW,Sun-Fire-V490, CSN: -, HOSTNAME: sc09-g2
Dec 20 20:16:07 sc09-g2 SOURCE: cpumem-diagnosis, REV: 1.5
Dec 20 20:16:07 sc09-g2 EVENT-ID: 1f740340-d887-4161-dc0d-9649a6f65669
Dec 20 20:16:07 sc09-g2 DESC: The number of errors associated with this memory m
odule has exceeded acceptable levels. Refer to http://sun.com/msg/SUN4U-8000-35
for more information.
Dec 20 20:16:07 sc09-g2 AUTO-RESPONSE: Pages of memory associated with this memo
ry module are being removed from service as errors are reported.
Dec 20 20:16:07 sc09-g2 IMPACT: Total system memory capacity will be reduced as
pages are retired.
Dec 20 20:16:07 sc09-g2 REC-ACTION: Schedule a repair procedure to replace the a
ffected memory module. Use fmdump -v -u <EVENT_ID> to identify the module.
Dec 20 20:16:11 sc09-g2 svc.startd[7]: [ID 652011 daemon.warning] svc:/system/we
bconsole:console: Method "/lib/svc/method/svc-webconsole start" failed with exit
--More--(13%)The unit conitues to operate but not as well as it should. This might not be what a typical user sees though because Im actually running Sun's VTS test when I see that type of message from the OS.

Can I automate a VI to test hardware through CAN with some sort of script?

Similar Messages

Maybe you are looking for