Can I boot imac from macbook install disk 1?

I'm trying to install BootCamp on my intel iMac but it keeps failing at the disk partition, now having repaired permissions and verified the disk the help file tells me to boot my iMac from a startup disk and then load a disk utility. I can't find my Install Disk 1 for my iMac but I do have one for my intel Macbook. Is there a utility prog that sits on the disk that is not device dependent or would it just not work? thanks in advance if anybody can help me....

Hi,
the OSX discs that come with the Intel-Macs are usually bound to this Mac or at least this line of Mac and do not work on other Macs.
Therefor your chances are not good to use the MacBook disc.
Sorry to say you have to start a thorough search for the iMac disc.
Stefan

Similar Messages

  • How do I boot up from my install disk?

    Hi,
    What key do I hold down when I boot up? I have tried the option key and the shift key and those don't work. To get to my install disk, I put it in the CD, click on insall and then it restarts my computer for me.
    Am I missing something? Is there another key to hold down?
    Thanks!
    Martha
    eMac G4   Mac OS X (10.3.9)  

    Thank you, it worked!!!! I had to use my apple keyboard though, I couldn't use my regular Logitech one but I'm so relieved that it worked.
    eMac G4   Mac OS X (10.3.9)  

  • Can't boot G5 even from OS install disk. Help?

    I've trolled the message boards 25 pages deep and searched all the "Can't boot my G5" threads and still haven't found anyone describing what my machine is doing so thought I'd start a new thread in the hopes someone can help me out.
    Ok I have a G5 dual processor machine. (Power PC chip, not Intel) Things went bad when I tried to do an Archive and Install of Leopard (OS 10.5) The install looked as normal until I got to one minute left on the install. At that point the install never progressed. I thought maybe it was doing some behind the scenes processing and decided to leave it over night. The next day my machine was still hung on that One minute left. So obviously it was a failure. Of course now the problem is I have an install that never completed of the OS and so that partition is, I assume, unbootable. Wiped away the Tiger OS and did a 99% install of Leopard. So I had to shut down by holding the power button.
    I think to myself, "No worries I can just boot from my 2nd partition holding down the Option key to select it on the boot up screen". I always keep a partition with an OS on it for times like these. So I reboot, hold option key, select my other partition, things look OK. I get the grey screen with the Apple logo and I get the wheel animation turning. (Not beachball of death but the typical circular, almost sun ray configuration thing) At this point, usually the screen will go black for a moment before the desktop loads. However, in my case once the screen goes black after the load screen, it stays black. Now let me say the monitor does NOT turn off. There is a definite difference when I manually turn the monitor off. When off it's truly black. But this is like a power on black, not true black. (If you need me to explain this better feel free to ask me to clarify)
    So the untouched, pristine Tiger partition boot is a No Go. I figured I'd then give up on trying to put Leopard on my desktop machine (I use it on my laptop) and reinstall the original OS and system software from the system disk that came with my G5. I boot machine holding down eject button, place the disk in, close the drive door and shut down again by holding power button. Reboot holding C key and the same routine happens with booting from the disk. Gray Apple logo screen, sun ray circle moving, screen goes black on the attempted transition to desktop .. but stays black. I also tried booting with my Disk Warrior disk to no avail. Same thing happens. (Also tried booting from disks by selecting them manually from booting with Option key down) At first I wondered if it was a monitor issue. That maybe my desktop was up but there was an issue with the signal being passed to the monitor on the resolution jump. Thought perhaps hitting the Eject key on the keyboard when I had attempted to boot from the partition (not from disk on this test) would tell me if it was a monitor issue. If it was a monitor issue, the disk tray should open. But alas, no.
    So since I cannot boot normally from any partition or disk I decided to boot into single-user mode.
    I did the fsck -fy thing and it told me everything was ok. I had also previously installed applejack and I ran that and short of correcting a few permissions and dumping some unneeded caches it came back with a system OK.
    At my wits end I booted into target disk mode and ran Disk Warrior on both the original half installed OS partition and the back up emergency boot up partition from my laptop. Again, everything OK. Hoped against hope that I could actually install an OS onto my G5 from my laptop but I was only given the option of being able to do it from my laptop with the Leopard disk and it would only allow me to do it if I used Disk Utility to completely format that drive first. No, thanks.
    Re-attempt to boot G5. Failure. So now I turn to hardware. Disconnected everything beside the keyboard and mouse. Try again. Fail. Pulled a couple sticks of Crucial memory out of the machine and left the stock RAM. No dice. Pressed the small power unit reset button under the RAM slots. No change. Zapped the PRAM. Still nothing. Try to boot in Safe mode holding down shift key. Doesn't work.
    It seems to me if I can't even get the machine to boot from the Install disk that there is something going on that is much more major than software issues.
    Bad motherboard? Any ideas? Because I'm all out of ideas.

    Brother, Sound74, I thought I was the only one pulling the hair out of my chest one by one the past two days. Your situation is very similar to mine, and I'm just as clueless as you are. I started getting kernel panic screens, then nothing on boot, until finally I brought it to the local genius bar. They ran all the usual software/hardware tests, updated Tiger to 10.4.11, recommended I buy Leopard and do an erase-install. My computer, of course, was working absolutely fine by this point. I bought Leopard, came home, backed everything up, then tried to install the new OS. Like in your case, it just up and quit half-way through. Screen went black and a "No DVI Signal" message came on my display (it does this when I turn it on without first turning on the computer).
    So I thought, well, maybe it takes a really long time to erase-install, and the monitor is just waiting for things to kick back in. I've always upgrade-installed before, so I couldn't tell if this was normal or not. But about half an hour later, my fans kicked in so fast I thought I had a P-51 Mustang taking off in my studio. I waited a bit more and finally force-shut-down my system. Not knowing what to expect, I nervously tried to re-boot.
    Nothing. Zip. I can't safe boot, I can't boot from the installer disc, etc. The only thing I can do is the option-key thing whereby you choose the startup disc. And of course, it only gives the Leopard install disc as an option, because now the entire HD has been erased! But when I choose the Leopard disc, of course it doesn't work.
    So I have a nice $3000 paperweight sitting in my studio. I guess I'll have to bring it back to the Mac store, where if it costs more than $300 to fix, I'm going to say screw it and put that dough toward a new iMac.
    Sorry I couldn't provide any helpful info, but I just wanted you to know you're not alone in suffering the slings and arrows of outrageous technology.
    Keep me posted on any solutions you discover, and I'll do the same.
    Noochy1
    PS My applecare expired a month ago! AAAAARRRRGGGHHHH!!! **** Murphy and his stupid laws.

  • My imac wont boot from the install disk

    My IMAC will not boot from the install disk.

    Hello, your installation disk is running under OSX??? If no the media has a problem!!!
    1. Restart your mac and hold the alt (option key) to select media to install.
    2. Restart you mac and hold the "c" key to boot.
    an other solution is to make a partition on the hard drive and put a restore image of the Mac os X Installation dvd inside it then Restart your mac nad hold the "option" key and you will see the partition with mac os x installation and you can make a new installation from there.

  • My G5 iMac cannot boot up from its hard disk

    My G5 iMac cannot boot up from its hard disk - I get the alternating Mac OS folder and the ? Folder which I understand means the system cannot be found.
    On recommendation from a friend I tried replacing the battery - no difference.
    However, I can boot up from the CD/DVD drive from the OSX installer disk, DiskWarrior, Drive Genius and Techtools Pro. But none of these utilities can see my hard disk to see if it needed repairing.
    In fairness at one point DiskWarrior did see the drive and I was able to replace the directory safely. However, on subsequent reboots nothing can see the disk.
    Suspecting the hard disk I bought a new one and a USB/SATA casing to mount the old drive in to see if I could get anything off of it. The good news so far is that the old drive (now mounted in the new USB casing) can be seen and read on my daughters iMac. So all my information is safe and also now backed up.
    Having installed the new disk I found it also cannot be seen by any of the above utilities. I have since formatted it in the USB casing and put it back in the iMac but it still cannot be seen.
    As a test I installed a new system on an old 40Gig Lacie Firewire drive attached to my iMac. This works and boots ok - sometimes.
    I am now experiencing the necessity to force shutdown and restart from the startup button several times before the external disk is recognised. And most times it freezes after 30 minutes or so.
    I might also add that after some force shutdowns/startup I get little or no chimes. And sometimes when trying to reset the PRAM get no second chime. On other occasions I do.
    Now I am totally stuck and wondering if anyone can throw some light on why my iMac can boot up from a variety of CD/DVD utilities and sometimes an external Firewire disk but not from its own hard disk which, as I have already said, can be seen on my daughter's iMac but not by mine, so its not the disk.
    Does anyone have any suggestions at all before I bite the bullet and take it in for a diagnosis and repair (depending on cost).
    Thanks

    Could be the logic board, in which case you would need to take it in. Since the drives are good, and the directory was repaired, the logic board is about all I can think of.

  • Having trouble installing software AND restarting from OSX Install disks

    This may be a previously answered problem, but I couldn't find it in the forum.
    My recently-purchased MacBook has iPhoto v. 2.x on it, but this is really old -- the current version is 6 or so.
    I thought a newer version might be on my Install disks, but I can't seem to get past the screen that tells me to restart in order to install System X. When I do click it, it restarts back to my login screen, and then I need to relaunch the OSX installer, and the loop starts over.
    The obvious solution is to restart from the Install disk, however, I cannot start up from that disk; I hold down C while restarting, but I get a flashing folder-with-a-question-mark in it. Note the grey install disk is 10.2.4 and my computer is running 10.4.11 with upgrades. Is this the issue?
    Besides hoping one of you can help me 1) start from my Install disk and 2) find and install iPhoto, perhaps someone knows which version of iPhoto I will have, if any, on this disk (CD vers 1.0, 2Z691-4306-A).
    Vielen Dank!
    -A-

    Your question was answered unless we didn't understand it correctly. You are trying to boot an Intel Mac with "Note the grey install disk is 10.2.4." 10.2.4 cannot boot any Intel Mac. BDAqua addressed that in his reply. You have not responded to either his or my original reply.
    You're original question was about iPhoto. I replied that you can reinstall all originally pre-bundled software for your computer by running the Install Pre-Bundled Software installer contained on your OS X Installer Disc One that came with the computer. There's no need to boot from the installer disc in order to reinstall pre-bundled software.
    So, is there a part of your question that still needs addressing? Please let us know, and we will be glad to help if we can.

  • OS X Tiger can't boot up from my HD

    I have recently installed 10.4 on my G4 and I am having start up problems, I have two internal hard drives a 20 gb that was factory installed and an 80 gb ATA that I installed myself. I previously had 10.33 running perfectly on the second drive and the origianl OS 9.2 on the factory installed drive. After I installed Tiger the machine starts up I am met with the Grey apple then it changes to the 'prohibited' circle with a line through, I have tried the following with no avail:
    1. Reset the PRAM
    2. Reset the NVRAM
    3. Reformatted the orignal hard drive and re installed from the Retail disk
    4. Held option at start up and selected the OS X volume as a start up disk
    5. Ran disk doctor from the install disk.
    6. Removed the third party RAM and replaced it
    If I boot from the OS 9 volume and then select the OS X volume as the start up disk and restart, OS X runs first time, but once the computer is shut down it reverts to not starting up. If II start up in Safe Boot mode the screen reads 'waiting for boot volume...' and keeps repeating without doing anything.
    Until last week I could get by starting up from OS9, but my VGA monitor packed in and instead of getting a new VGA monitor I got an Apple cinema display, that can't run in OS 9!
    Can anyone help, I'm sure this something stupid but I cant figure how the same hardware set up can work in Panther and not in Tiger.
    PowerMac G4 450 AGP graphics   Mac OS X (10.4)  

    I am having exactly the same problem after upgrading my G4 dual 450 with a GigaDesigns 7A-1600U. I am using 10.3.9 Only by switching off can my machine "see" the startup disk. If I have to, or decide to, do a restart by clicking on the button in the menu under the Apple Logo, extreme top left of the desktop, holding the option key down, so that Startup Manager should show the startup disk, does NOT show the icon of the statup disk.
    I have to power down, hold power switch for six seconds, then power on with option key held down. Then I see the necessary icon, can choose it and get a startup. I installed Panther from a retail disk set and upgraded by download from the Apple site. Firstly 10.3.8 and then 10.3.9. Worse still, I cannot install anything that asks for a restart before installation from a CD. I am wondering if I should reset the logic board, ( press the little switch near the battery).
    Like mitchell I have done everything else.
    Any ideas, please?

  • Can i connect imac and macbook by usb?

    can i connect imac and macbook pro by using USB clable? i just want pass my files and music from macbook to imac.
    thank you

    You can't connect both computers by USB. The easiest way is to connect them using a FireWire cable (if your iMac and your MacBook Pro have got FireWire ports), and put your MacBook in target disk mode (start your MacBook holding the T key).
    Doing this, the iMac will detect the MacBook's hard disk as an external disk, so you can easily access to your files from Finder and copy the data you want to the iMac's hard disk

  • HT3986 can bootcamp be used with Windows install disk on an external drive (internal is broken) ?

    can bootcamp be used with Windows install disk on an external drive (internal is broken) ?

    With Boot Camp, you must install Windows onto in internal HDD (or SSD).  If you are referring that your internal Optical drive is broken, you might be able to install Windows from an external drive, but you might not.  I have heard varying levels of success with that.  I'm not sure what the official stance is, but I do know that if youe machine shipped with an internal optical drive, then you must use that to install Windows using Boot Camp and not swap it out for a "data doubler" and try to install from an external optical drive.

  • EMac won't start from startup install disk

    Aloha gang,
    Our school purchased 25+ seats volume license of 10.4 last year and to date I have used 15. Most upgrades have gone on without a hitch but today I'm trying to upgrade some eMacs (same models as I have previously upgraded without problem) and it will not start up from the disk no matter what I try. I've tried:
    * putting in the disk, clicking on install, clicking on restart so it restarts from the install disk
    * putting in the disk, starting the computer and holding the C button
    * putting in the disk, starting the computer and holding the option button to choose the install disk
    None of those have worked. All that happens is the grey screen with the darker grey apple and the spinning thingy beneath it. I thought it might be that I was being impatient so I started it again, went to eat lunch and when I returned it was exactly where I left it. Any suggestions?
    Oh yeah - I have tried using the original purchased media as well as backup copies of the media in all instances.
    Thanks for any help you can give, gang!

    nalani:
    Thank you for indulging my ignorance and so graciously enlightening me as to your situation.
    It seems to me that the difficulty you are experiencing has to do with individual computers not responding appropriately to the discs from which you are trying to boot them. The disks themselves may not be the issue at all, since you have previously booted other computers from them.
    My first suggestion would be to check the computers themselves to see if they have issues that need to be corrected. If those computers are running previous versions of OS X and you have the install disks for them, see if you can boot from them and run Repair Disk. I would also check for hardware issues by running the appropriate Apple Hardware Test disk. BDAqua's suggestion to Resolve startup issues and perform disk maintenance with Disk Utility and fsck is appropriate, especially if you are unable to boot from an install disk to run Repair Disk.
    BDAqua's other suggestion also has merit. That is, using one of the computers that will boot the disk as Host, boot the recalcitrant computers into Firewire Target Disk Mode and run Repair Disk and if everything checks out OK, do the installation in that way.
    No one is questioning the legality of what you are doing. It is just that most of the users who post have a single user or family license at best, so your licensing situation is a bit rare around here.
    Please do post back with an update of how things go if you attempt any of the suggested approaches.
    Good luck.
    cornelius

  • How to boot always from a firewire disk?

    Hello,
    I hope someone can help me on this.
    My HD is almost dead and it's making a lot of noise. I have managed to create a boot disk
    on an external disk connected through Firewire.
    What shall I do now to have the HD definetly unmounted and have the boot always from the firewire disk?
    Thanks in advance
    Tom

    I've had a similar problem with an external drive that was USB powered.
    In my case, the system was looking for a boot device before the drive was ready.
    I had a friend that was good with OpenFirmware add a delay before booting to give the drive time to become ready. Added 5 seconds to the boot process, but it works!
    Like cldjr said, hold the Option key (⌘) when powering up, if the drive shows up there, I'd guess it's the problem I described...
    Anyone good with OpenFirmware??

  • Updating iphoto to 6.0 on other mac from new install disk?

    Hi,
    I have a new mac book and would like to install iphoto 6.0 on my older mac. Can I simply use the newer install disk to get the latest version of iphoto? Or will I have to now buy a full package of iLife?
    Thanks in advance

    Paul:
    That would be against the license agreement:
    "2. Permitted License Uses and Restrictions. This License allows you to install and use one copy of the Apple Software on a single computer at a time. This License does not allow the Apple Software to exist on more than one computer at a time, and you may not make the Apple Software available over a network where it could be used by multiple computers at the same time. You may make one copy of the Apple Software in machine-readable form for backup purposes only; provided that the backup copy must include all copyright or other proprietary notices contained on the original. Except as and only to the extent expressly permitted in this License or by applicable law, you may not copy, decompile, reverse engineer, disassemble, modify, or create derivative works of the Apple Software or any part thereof. "
    You can read the entire license agreement here: http://docs.info.apple.com/article.html?artnum=26275
    Do you Twango?
    TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
    I've written an Automator workflow application, iPhoto dB file backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

  • Can anyone boot Leopard from an external hard drive on  an iMacPPC?

    Can anyone boot Leopard from an external hard drive on a G5 iMac PowerPC? How?

    Allan's answer is irrelevant as he refers to Snow Leopard. He must have isread your post!
    Yes, you can and I do. The proviso is that the external hard drive is connected by firewire, as a PPC Mac cannot boot via USB.

  • How do you NOT start up from the install disk if it is in the CD drive?

    This has to be a dumb question, but . . . I put my 10.4 install disk into the CD drive of the Mini to try an experiment, installing OS X on a thumb drive as a backup.  It didn't work. Now the Mini will only start up from the install disk, not the internal drive (which has 10.5.8 on it). 
    The advice I have seen in the forum says to hold down the D key upon startup and that will choose the internal drive as the startup disk. That didn't work. Also, there was a suggestion to hold down the option key upon startup, and then choose the internal drive from the startup manager. No luck there, either.  I also tried holding down the eject button on the keyboard during startup, but it still started up from the install disk. 
    I feel like I am in a 1 Infinite Loop here.  Any advice much appreciated.
    Jim

    Oops, I will now answer my own dumb question.  I found another suggestion in the Powerbook forum that said to hold down the mouse button as it boots up, and the disk should eject -- it worked!  I hope this will help somebody else.  Sorry about the previous post.

  • TS1440 Following these suggestions, I startup from the Install Disk holding down C. The installation process proceeds as far as "Checking disks..." (part of Select Destination) but hangs up there: the barbershop pole just spins and spins... What do I do n

    Following these suggestions, I startup from the Install Disk holding down C. The installation process proceeds as far as "Checking disks..." (part of Select Destination) but hangs up there: the barbershop pole just spins and spins... What do I do next? This is on an old iBook BTW, 2001 G3, OS X, 10.1.2.

    Likely, but can you try to erase it/format it?
       3. Click the Erase tab.
       4. Click the disclosure triangle to the left of the hard drive icon to display the names of your hard disk volumes and partitions.
       5. Select your Mac OS X volume.
       6. Highlight the drive, select Partition Tab, then Format type... MacOS Extended Journalled, select the Security Options button, choose Zero Out Data, Erase... after completion hopefully you'll be able to get a good install.
    Needs to be Apple Partition Map (APM) partition scheme.

Maybe you are looking for