Can I change the output voltage

I am using NI Elvis board.
I measured the digital output voltage and it was approximately 2.3 volt.
can I increase the output voltage to ,for example, 5 volt.

GDE [DE]
thank you for your replay.
I mentioned this problem to one of my instructors. he told that the needed current to operate the relays is larger than the borad can supply. therefore, the output voltage droped from 5 volt to 2.3 volt.
he suggested a buffer and the relays worked.

Similar Messages

How can I change the output for certain columns only?

I am finding it hard to explain my issue , as I am very green when it comes to database, but I will try my best.
I am writing a script that will query a database and output 5 columns, the first and last name of a student, the last name of their adviser, their enrollment status, and how many years they have been enrolled.
I have the student's enrollment date and graduation date stored, however not all students have graduated, so that field is null for some students.
my question is, how can I use their enrollment status of graduated to change the calculation of how long they were enrolled for.
This is what I have so far :
SELECT
     STUDENTS.NameFirstS,
     STUDENTS.NameLastS,
     STUDENTS.EnrollStatus,
     TRUNC((MONTHS_BETWEEN(SYSDATE, STUDENTS.EnrollDate))/12) as Years,
     FACULTY.NameLast
FROM
     STUDENTS,
     FACULTY
WHERE
     STUDENTS.ThesisAdvisor = FACULTY.FacultyId
I'm not sure where to go form here, like I said, I am very new. Thank You in advance!

Thank you for the warm welcome :)
My Oracle Version is 11.2.0.1.0
Here is the create statement I used for the table.
CREATE TABLE STUDENTS
(StudentId NUMBER(9)
,NameFirstS VARCHAR(255) NOT NULL
,NameMiddleS VARCHAR(255)
,NameLastS VARCHAR(255) NOT NULL
,PhoneHome NUMBER(10) NOT NULL
,PhoneOffice NUMBER(10)
,HomeCity VARCHAR(255) NOT NULL
,HomeState VARCHAR(255) NOT NULL
,HomeStreet VARCHAR(255) NOT NULL
,EnrollDate DATE NOT NULL
,EnrollStatus VARCHAR(255) NOT NULL
,StudyArea VARCHAR(255) NOT NULL
,SpouseNameFirst VARCHAR(255)
,SpouseNameLast VARCHAR(255)
,ThesisTitle VARCHAR(255) NOT NULL
,ThesisInternational VARCHAR(255)
,ConvocationDate DATE
,ThesisAdvisor NUMBER(9) NOT NULL
,Mentor NUMBER(9) NOT NULL
,CONSTRAINT STUDENTS_pk PRIMARY KEY (StudentId)
,CONSTRAINT STUDENTS_Mentor_fk FOREIGN KEY (Mentor)
REFERENCES FACULTY(FacultyId)
,CONSTRAINT STUDENTS_ThesisAdvisor_fk FOREIGN KEY (ThesisAdvisor)
REFERENCES FACULTY(FacultyId)
And here is 2 inserts of random data
INSERT INTO STUDENTS (StudentId, NameFirstS, NameMiddleS, NameLastS, PhoneHome, PhoneOffice, HomeCity, HomeState
, HomeStreet, EnrollDate, EnrollStatus, StudyArea, ThesisTitle, ConvocationDate, ThesisAdvisor, Mentor)
VALUES(778506631
          , 'John'
          , 'Jacob'
          , 'Smith'
          , 3125551234
          , 5182293313
          , 'Wilksbury'
          , 'Texas'
          , '14 Main Road'
          , TO_DATE('04-SEP-2003', 'DD-MON-YYYY')
          , 'Graduated'
          , 'Physics'
          , 'Why Move'
          , TO_DATE('07-JUL-2008', 'DD-MON-YYYY')
          , 157928743
          , 997569876
INSERT INTO STUDENTS (StudentId, NameFirstS, NameLastS, PhoneHome, HomeCity, HomeState, HomeStreet
, EnrollDate, EnrollStatus, StudyArea, SpouseNameFirst, SpouseNameLast, ThesisTitle, ThesisInternational, ThesisAdvisor, Mentor)
VALUES(251321188
          , 'Larry'
          , 'Timsfield'
          , 2815551200
          , 'Johnsburg'
          , 'Florida'
          , '223 Route 54'
          , TO_DATE('09-SEP-2010', 'DD-MON-YYYY')
          , 'Full Time'
          , 'Medicine'
          , 'Wanda'
          , 'Timsfield'
          , 'Cut Me Mick'
          , 'Yes'
          , 997569876
          , 101325587
I don't know how to format them like you did in your reply, so they look like a quote, so I hope that just pasting them in is okay.

Can you change the output slide size in Captivate 7?

Hello,
I am looking to change the defualt size of the slides when a project is published into a word doucment. I have seen this done before, but I cannot find any information on this process. I know it needs to be done in a Captivate folder and not in the project it self.
Thanks!

Nevermind, I found it in the Adobe Captivate folder under Gallery\Printoutput. From there you will have 3 different word docs, Lesson.doc Step by step.doc, and Stroyboard.doc. You make the change desired output document.

Can you change the output resolution on appletv 2

HAving issues seeing video on a runco 61 " plasma with vivx processor. Also using hdmi to dvi converter. I want to change from 720 p. Is it possible ? In the apple menu there is an option for hdmi out that wont change from auto.

The Apple TV only supports TV's that accept 720p, they also don't support DVI but may well work in some cases with DVI.
The Auto setting for HDMI isn't what you think it might be its for switching between RGB and Y'CbCr

I can't change the track output in Logic X

Hi,
I'm running Logic X on OS X 10.9.4, 2.9GHz Intel Core i5, 8GB 1600 MHz DDR3, with various Native Instrument, iZotope and a few other plugins.
My problem is that I can't chang the output on individual tracks in the Master window. I remember changing it once and now the menu seems to be locked and won't open. I've tried opening a new project and I still can't change the output on the tracks.
Is there some way I can reset this?
~Thank you!

Oh. I see. We all have different preferences. I don't mind the date on mine though.
Hope they get to look over this issue.
http://storeyourpicture.com/images/s...lectronics.jpg

When bates numbering a .pdf in XI, how can I change the file name to include the bates number AND its name? I know under file output, there is an option for either/or. I want both. Thank you.

when bates numbering a .pdf in XI, how can I change the file name to include the bates number and the file name? I know under "file output: it's either/or. I need both. Thanks!

Long ago I wrote a little demo using the touch command. Check out the following thread:
http://forums.ni.com/ni/board/message?board.id=170&message.id=25128#M25128
LabVIEW Champion . Do more with less code and in less time .

How/where can you change the delimiters within the output file -Urgent Pls!

Hello Experts,
When Exporting data through EAS, how/where can you change the delimiters within the output file (ie. space delimited vs tab delimited vs custom)
Thanks in advance.
Regards,
Sonu

This is where I will be shot down in flames but at least in 7.x I am unaware of any configuration option that allows you to export in anything other than space delimited.
I guess you could write a shell/perl script that could change this outside of Essbase
Edited by: DrFosterMan on Jan 16, 2009 12:54 PM

How Can I Change The Sample Editor's Audio Output Channel?

Hey, new to logic, im using a Motu 828mk3 interface,
The Sample Editor is playing out on differnt outputs(1-2)
on my interface than my audio tracks in the arrange window,
my audio tracks are assigned to out 9-10 in the mixer section
which are the Main outputs on my interface, How can I change the
audio output of the Sample Editor to play out of my interface's main outputs(9-10)?

Change the output of the Prelisten mixer channel to the outputs you want it to play from. The prelisten channel is used for the sample editor and the Apple loop previews... you'll find it in your mixer somewhere in the high audio channel numbers...

Can you change the color of the links in FM HTML5 Output?

I edited the style mapping in FM and it didn't work. I edited every CSS I can find in the output folders and subfolders (by opening in Notepad). The links are all still blue. Any ideas?

I figured out how to do it. My FM book has four chapters. My hypertext links and cross references are formatted with a character style named link. When creating the HTML5 output, FM made a folder for each chapter containing (among other things) a css file for the chapter. I added the the span and the link definition see below) to the css for each chapter (adding it to main.css or jqueryui-custom.css did not work). I'm happy that it works, but it means that I need to add it to the css after generating the HTML5 output (FM overwrites the css files every time you generate the output). If anyone has a better idea, I'd love to hear it!
span.FM_link {
        font-style:      italic;
        font-weight:     bold;
    color: #4c4c4c;
        text-decoration : none ;
        letter-spacing: -0.03em;
A:link {
    color: #000000;
    text-decoration: underline;
A:visited {
    color: #3a3a3a;
    text-decoration: underline;
A:hover {
    color: #000000;
A:active {
    color: #000000;
    text-decoration: underline;

PLOT THE OUTPUT VOLTAGE WITH RESPECT TO TIME

I have VI that is controlling the Standford Research power supply model PS350. I am using existing NI drivers for this instrument.
I wanted to know what would be the easiest/fastest way of taking the multiple readings of the output voltage at the different point in time and then plotting the voltage versus time.
Any directions and suggestions are appreciated.
thanks,
Pedja

I cannot tell you any specific information about your device but if you want to plot your data in LabVIEW, I recommend using an XY Graph. This graph allows you to associate a specific y with a specific x. Consequently you can plot data where the time between the sample changes. Look in the LabVIEW shipping examples for an XY Graph example.

How can I reduce the output size of what I want to print?

I have an HP Touchsmart Web and recently needed to enlarge the document I was printing. I thought I enlarged it under the Advanced tab in Printer Preferences, but now I can't find anywhere that you gives you the option to change the output size. I remember it gave me drop down choices of 25%, 50%, 75%, 100%, 150%, 200% etc. Now I can't print most of the things I need because it enlarges everything. However, when I scan, it prints real size, it's only when I print something from the computer. Please help! I can't use my printer when I need it!

Thank you for your help. Your reply wasn't actually the answer I needed, but it somehow jogged my memory as to how to fix it. I kept thinking the problem wasn't with the printer, but with a setting in my computer and I was correct. I had to go to File, then Print Preview, then change the Scale, which had the drop down choices I remembered. I changed it back to 100% but was surprised it stayed permanently at the setting I had used before. I thought it always went back to 100% after turning off the computer, but that obviously isn't the case. Thanks again!

How can I change the frame rate of a project in imovie 10?

My problem is: I made a gopro movie with a frame rate of 50 fps. I imported it to imovie. So far so good.
Scrubbing over the clip i found one single frame which looked amazing. So I draged some seconds of that clip into the timeline (the project if you will).
The goal was to make a freeze frame out of this "spezial" frame.
Unfortunately I could not find this frame in the timeline any more - it's gone.
I think imovie dropped half of the frames to fit the clip into the projekt, which I assume is using 24-25fps.
The only solution I found is to decrease the speed of the clip to let's say 50%.
But is there a better way?
Can I change the frame rate of the projekt somehow? I think it was possible in imovie 11.
many thanks
Rainer
(from austria)

iMovie 10 won't share at 50 fps and so for 25 fps output probably drops every other frame. This is different from Imovie 9 which could handle 50 fps. However, if you do 50% speed it will use all the available frames so that is indeed the way to find the frame you want. After you have made a freeze frame I think you can switch the clip back to normal speed. I am not aware of a better way in iMovie 10 By the way there is also no facility to export a still of a frame in iMovie.
As a GoPro user I think FCP 10.1 would be the best choice.
Geoff.

How can I change the name of a Sub Circuit in Multisim

How can I change the name of a sub-circuit in MultiSim?
For example:
I have a sub-circuit named "Output Channel 1" and its RefDes is SC1. How do I change its name to 'Input Channel 1'?

Hi,
If what you want to change is the RefDes you can do it by right-clicking the sub-circuit and selecting properties. If what you want to change is the name, you can right-click the sub-circuit in the Design Toolbox.

How to change the output directory of .xml files

Hi,
There are lots of .xml files generated under
$ORACLE_AS_HOME/j2ee/home/applications/xmlpserver/xmlpserver/xml.
(ex:/usb/bipub3/oracle/oc4j_bi/j2ee/home/applications/xmlpserver/xmlpserver/xml).
I found these files are generated in the following operation;
1.Log in BI Publisher.
2.Select the Schedules tab.
I think they are kind of temp files so we will be able to delete them.
But I'd like to know how to change the output directory.
Can we change the above directory to other path?
Regards.

Why? As that may invalidate support since you configure/alter the deployment.
The location is specified in oc4j_bi\j2ee\home\applications\xmlpserver\xmlpserver.war, so you could go into the war file and alter it.

How to change the output executable file name(a.prj:(output)--- b.exe)

LabWindows / CVI： how to change the output executable file name
For example, I have an A project a.prj, I do not want to compile the output file is a.exe, but b.exe.
I will try to save as a.prj b.prj, a.cws save as b.cws
eg:a.prj ---->(output)--->b.exe
Solved!
Go to Solution.

You can go to Build >> Target Settings menu item, select Release (or Release 64) in the Configuration filed and set the name of the executable to create in Application FIle field, withouyt need to change the prj or cws filename.
See the complete description of available options here.
Proud to use LW/CVI from 3.1 on.
My contributions to the Developer Zone Community
If I have helped you, why not giving me a kudos?

Can I change the output voltage

Similar Messages

Maybe you are looking for