Can I change the properties of a Binding attributes in ADF BC?
Hello all,
i have a binding attribute as follow:
<af:inputText id="LnlnmanfBlLoanSmanSmanNam"
value="#{bindings.LnlnmanfBlLoanSmanSmanNam.inputValue}"
label="#{nls['LNLNMANFBLLOAN_SMANSMANNAM']}"
partialTriggers=" LnlnmanfBlLoanSmanSmanCde"
required="false" columns="35" maximumLength="60"
disabled="true"
shortDesc="#{nls['LNLNMANFBLLOAN_SMANSMANNAM_HINT']}">
<f:validator binding="#{bindings.LnlnmanfBlLoanSmanSmanNam.validator}"/>
For example, i want to set disabled to false, how can i access the properties in ADF BC?
Any sample code for reference?
Thanks
Neon,
Is is possible to do that in the VO java layer?Absolutely, no it is not. You cannot access the view layer components from the model like that.
Sounds like what you want to do is this:
<af:inputText id="B"
value="#{bindings.B.inputValue}"
partialTriggers=" A"
required="false" columns="35" maximumLength="60"
disabled="#{empty bindings.A.inputValue}"
<f:validator binding="#{bindings.B.validator}"/>You set the disabled property to a boolean EL expression - the one I used would make the input text disabled if the column A is "empty" (null or empty string)
John
Similar Messages
-
Can we change the properties of the Page in Portal?
Hi,
Is it possible to change the properties of the Page? I want to change the height and width properties of the page, but i dont see the properties in the list. Can you please guide?
Regards
SaiHi Sai
You can change the page properties. Right click on portal page > object. it will open the page object properties.
If a page is locked, you can open it in read-only mode. then you need to unlock the page object. refer to [Page Editing|http://help.sap.com/saphelp_nw04/helpdata/en/a3/badf3d48b05d5ae10000000a11405a/content.htm]
Please check the page properties attributes. [Click here |http://help.sap.com/saphelp_nw70/helpdata/en/13/81a66d100011d7b84b00047582c9f7/content.htm]. this properties list is also applicable for the object type iviews/pages.
Hope it will helps
Best Regards
Arun Jaiswal -
Can not change the control level of item attribute "Inventory Asset Value"
I can not change the control level of the item attribute "Inventory Asset Value" from Master Level to Org Level. It's show me the message "FRM-40200: Field is protected against update".
Version is below:
Oracle Application: 10.7SC
Form: INVIDCTL 6.0.26I did a trace when I chage the control level. the SQL is below:
SELECT COUNT(*)
FROM CST_ITEM_COSTS CHILD
, CST_ITEM_COSTS MASTER
WHERE MASTER.INVENTORY_ITEM_ID = CHILD.INVENTORY_ITEM_ID (+)
AND MASTER.COST_TYPE_ID = 1
AND CHILD.COST_TYPE_ID (+) = 1
AND NVL(MASTER.ITEM_COST,0) != NVL(CHILD.ITEM_COST (+) ,DECODE(MASTER.ITEM_COST, NULL ,0,-99999))
AND MASTER.ORGANIZATION_ID IN (SELECT MASTER_ORGANIZATION_ID
FROM MTL_PARAMETERS
WHERE ORGANIZATION_ID != MASTER_ORGANIZATION_ID )
AND CHILD.ORGANIZATION_ID IN (SELECT ORGANIZATION_ID
FROM MTL_PARAMETERS
WHERE MASTER_ORGANIZATION_ID = MASTER.ORGANIZATION_ID ) -
How can we change the properties of a seeded item in OAF !!!
Hi All Gurus!
I have a seeded item (Button 'Apply') on an Add attachement page provided by Oracle in Self Service Web Module. Oracle documentation says this:
If you want changes to the Attachments table or page to commit automatically, without requiring a user to select Apply in the base page, you can turn on "auto-commit" by setting the Automatic Save property to True for the attachmentLink, attachmentTable, or attachmentImage item.With "auto-commit" turned on, each action ("Add", "Update", "Detach") performed by the user in the Attachments table or page is automatically committed.
Q1) How we can see the properties of the seeded items?
Q2) How we can turn on the personalization pencil button of an item that is disabled by Oracle development team?
Please let me know how we can achieve this through self-service personalization. Any light on this.
Thanks in advance!
John
Message was edited by:
jtomYou donot need to do anything on the Add Attachment page. The autoCommit feature is exposed as a property on the Attachment bean. You need to extend the controller in the base page where the attachment Image, Link is present and get a handle to the attachmentBean and call setAutoCommit(true) which will enable automatic saving.Use personalizations to modify the controller class property on the base page. You can later choose to remove the Save button on base page using personalization.
-
How can I change the properties of only one element in an array of booleans?
I'm displaying an array of booleans to my operators, with each boolean in the array representing some system status check. Some of these checks are critical and some are not, therefore I want some of these booleans to have a different color when in the TRUE state (Red for the critical ones and Yellow for the non-critical ones). I can change the boolean colors with a property node, but that effects every element in the array. Is there any way to change a property of an individual element in an array? I know that I could take the incoming array and break it into two arrays - one for critical and one for non-critical, but this system is replacing an older system and the operators are accustomed to seeing their indicator lights a certain way and I'm trying to replicate what they had exactly.
Here's what I had in mind
Of course you can use as many colors as you want.
Message Edited by altenbach on 12-21-2005 04:53 PM
LabVIEW Champion . Do more with less code and in less time .
Attachments:
LEDarray.png 7 KB
ColorArray3.vi 23 KB -
Can I change gridline properties (in the regular tabular display)?
I would like to change the thickness of some of the gridlines in the regular tabular display in Discoverer (not in the graphing component).
I have exausted regular sources of info (the manuals, online help, metalink, technet, etc.) and hence my appeal here.
Am I missing something? Is one able to change the properties of gridlines? (I know that you can make them completely disappear if you want..)
Thanx,
Ty Haeber
Genomatica
San Diego, CA<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by Ty Haeber ([email protected]):
I would like to change the thickness of some of the gridlines in the regular tabular display in Discoverer (not in the graphing component).
I have exausted regular sources of info (the manuals, online help, metalink, technet, etc.) and hence my appeal here.
Am I missing something? Is one able to change the properties of gridlines? (I know that you can make them completely disappear if you want..)
Thanx,
Ty Haeber
Genomatica
San Diego, CA<HR></BLOCKQUOTE>
This setting is supported today in Discoverer Desktop. Discoverer Plus (web) does not yet have this level of fine grain formatting. This enhancement is targetted for a future release. -
How can I change the cardinality of Model Node?
Hi everybody
How can I change the cardinality of Model Node?
Previous:
I import a Model RFC, and some nodes has the cardinality 0..1, but with this configuration, when I bind to the text fields of my webdynpro and deploy, all my fields text are unables when I shows the webdynpro.
I check RFC and all the fields and estructures are obligatories.Hi Jesus,
You cannot change the cardinality of the model node. All the properties of the Model node are derived from the Model object.
Your input fields are disabled because you are not creating your model object properly.
You can import the example project TutWD_FlightList, which is available in c:\Program Files\SAP\IDE\IDE70\eclipse\examples.
Import it in NWDS and you can see how to initialize model object properly.
Thanks
Prashant -
My ipod works in itunes but does not appear in "my computer" after I changed the properties
My ipod works in itunes but does not appear in "my computer" after I changed the properties.
First off, I'm using Windows XP (and Mac SnowLeopard) Here's how it started. For some reason my ipod started showing up as a camera when I plugged it in. It works fine in itunes, though. But when I tried to access it from "my computer" it only
showed me the one and only picture I had on my ipod. I deleted that picture hoping it would no longer show up as a camera. When it still did I right-clicked on it in "my computer" and selected "properties". Under "autoplay" I
chose for it to 'not show up' or 'take no action' or some such deal when I plugged it in. I thought that would stop it from popping up the window that asks whether i want to 'open camera wizard' or 'open camera scanning' or 'open folder to view files' or 'take
no action' , etc. But now it won't show up in "my computer" at all. I also have a Mac with SnowLeopard. When I plugged my ipod into it my ipod doesn't show up in "finder" either! So basically my problem is not a mechanical one with hardware
or software; yht ipod still works fine in itunes. I just need to undo the change I made. I've searched all around my preferences, utilities, options, etc. It shows up on my "Device Manager" but not on "Disk Management".
Any help would be very much appreciated. Thanks.Hi,
To show up in Windows Explorer, you can try placing the iPod into
disk mode.
Moreover, i recommend you to
restore ipod to factory settings.
If this issue still persists, locate to device manager, uninstall and reinstall USB Mass Storage Device driver.
Here is an article you can refer to below:
http://support.apple.com/kb/TS1369
To get more help, you can also redirect to apple support forum:
http://www.apple.com/support/ipod/
Thanks!
Andy Altmann
TechNet Community Support -
Hi!!!How can I change the options in a VI express?
I want to scale a signal, and I am using the vi express "Scaling and Mapping". But!!!!I want to control the differents "options" that I can choose, linear scale, slope...How can I do it? I don´t know if it is possible in a vi Express. I know that I can change the properties of controls and indicators using properties nodes, but I thing that it doesn´t work in this case, but I am not sure!!!!
Thank you!!!
GraciFirst thing to do is to convert the express VI to a standard subVI by right clicking on it and selecting Open Front Panel. Then, select which front panel controls that you want and add them to the connector pane.
-
How to change the properties of a directory using java code
Hai All,
I need to change the properties of directory( websharing).
Can i do this using java code.
Regards,
CharanI need to change the properties of
directory( websharing).
an i do this using java code.Depends on whether the server has a Java API to do it. Most likely it hasn't. -
Assets panel styles, can i change the color of a style to be an exact color?
Assets panel > styles, can i change the color of a style
to be an exact color? for example, if i want to create a navbar
with the black and gray glass affect style, but i want to change
the color but keep the same style of shading. each style in the
assets panel has a default color, but i want to change the color
and keep the style. i did change the color a little bit by
adjusting the hue and saturation, but i can't seem to get an exact
match of the color i am trying to duplicate. any help is greatly
appreciated thanksWhen a style is applied to any object, the Properties panel
at the bottom will reflect the attributes which are editable in
that applied style. The properties which can be edited are fill and
stroke colors also apart from adjusting the Hue and Saturation.
Gradient colors can be modified by changing the fill color.
The nodes in the gradient will change the color from blue to black
or any other intended color of change. If you know the color you
can either enter it as a 6 digit value or you can pick a color from
an existing object.
Hope it helps. Let me know I am missing you query
completely. -
How can I change the name of a Sub Circuit in Multisim
How can I change the name of a sub-circuit in MultiSim?
For example:
I have a sub-circuit named "Output Channel 1" and its RefDes is SC1. How do I change its name to 'Input Channel 1'?Hi,
If what you want to change is the RefDes you can do it by right-clicking the sub-circuit and selecting properties. If what you want to change is the name, you can right-click the sub-circuit in the Design Toolbox. -
How to change the properties of individulal elements in an array?
Hi all,
I have an array (size is 25) of string and I want to disable and grayout half of them. But how do I do it? How do I change the properties of individual elements in an array? I have tried to use some of the examples given in the discussion forums, but it didint work for the task mentioned above. Anybody would be able to help me with a suitable example that can be specifically used for disable or enable the individual array elements?
DevTelemaque wrote:
The user will see the first half of the string elements filled-in and the lower half grayed-out (to be filled in later). Make a test VI, play around.
... except that all elements "greyed out" with this method contain the default string for the array element (blank by default, but changeable). There is no way to have meaningful, unique text in the greyed out elements.
I would suggest to use a listbox as control/indicator. Here elements can easily be disabled programmatically.
LabVIEW Champion . Do more with less code and in less time . -
Array of clusters and in the cluster is a bar meter, how can I change the color of the bar meter individually for each element of the array? I have just figured out that you can't change properties of one element of the array without all elements changing. For the scaling I had to make numeric indicators for each tick of the scale so that each bar meter in the clustered array would have individual scales. I also had to do some math to scale each barmeter to display correct proportions from 0 to 100%. Now I'm stumped on the color of the bar meter. Basically, if the value goes over a setpoint, the bar meter needs to turn red. It has to be in an array to be infinitely scalable.
Thanks
Matt
Solved!
Go to Solution.You can't do that-
without a little trick.
You could consider laying a custom color box over the bar graph in the cluster you can set the color based on the value of the bar graph or even make a "Pseudo"- bar graph using a series of color boxes stacked to look lie a bar and changing values of the Color boxs from empty to full to red.
Here is an example to demonstrate
Jeff
Attachments:
Pseudo bar.vi 12 KB -
Can we change the look and feel of the screen layout
Dear All,
I am new to ABAP WebDynpro, and would like to know the following with respect to ABAP WebDynpro :
1. To what extent can we change the look and feel of the screen layout ?
2. Is it possible to change the background color of the layout?
3. Is it possible to change the color of, Buttons etc ?
Any information / document/ link to explain this would be very helpful ..
Thanks in advance,
AditiHi,
Psl check out these links.
check out these webdynpro standard components in SE80 tcode -
WDR_TEST_UI_ELEMENTS
check out this link on webdynpro for ABAP-
http://help.sap.com/saphelp_nw70/helpdata/EN/03/0048413e466e24e10000000a155106/frameset.htm-WD for ABAP
http://help.sap.com/saphelp_nw70/helpdata/EN/46/9319f88f8115ebe10000000a114a6b/frameset.htm -UI elements
http://help.sap.com/saphelp_nw70/helpdata/EN/46/9319f88f8115ebe10000000a114a6b/frameset.htm-Button Properties
http://help.sap.com/saphelp_nw70/helpdata/EN/46/9319f88f8115ebe10000000a114a6b/frameset.htm- For different Layouts
Regards
Lekha
Maybe you are looking for
-
EJB 2.1 session bean calling EJB 3 session bean?
I have a WL 10 (JDK 1.5/EE 5) server that has several EJB 3 stateless session beans deployed and working well. But now I need to allow a JBoss 3.2.3 (JDK 1.4) EJB 2.1 session bean make remote calls into these EJB 3 EJBs. Can this even work? It seems
-
How do I place only the Photoshop Elements dialog box on my dock?
I am using Photoshop Elemetns 9 on an imac running the Lion operating system. I want to have only the welcome diaolg box on my dock so I have the option of opening the editor, or the organizer, or having access to my photos stored with Adobe. At th
-
I have tried re-installing and restarting my computer - and am in lineup for customer care - but it won't launch at all.
-
I downloaded the new Pages, Keynote, and Numbers, but they're horrible so I deleted them. Now they keep trying to update my old iWorks. I don't want them they are horrible!!! It is automatically updating (I don't have it set to automatic update),
-
Rendering file formats problem (non-issue in premier)
hello all, so i'm new to final cut and baffled at the unusual render issues i've encountered from the get go. i recorded some video using the canon fs-10 / fs-20, a lowend digital camcorder. the camera outputs the format to .mod which i then converte