Can I compile my project from windows to work with linux

I have written a program in Labview 7.1 for windows XP. Some costumers are interested to run this software under Linux Ubuntu. Can I write programs in labview on a windows-pc and from there build a application to run under Linux ?

Hi [email protected],
No, each operating system uses a different type of executable. There is a different LabVIEW Run-Time engine for Linux, Windows, and Mac. Any installer you build will only run on the OS that you built it on. However, any VI that you create can be opened and run on a different operating system if you have the development system.
Finally, the only way to deploy a LabVIEW application on a particular operating system is to use the Application Builder for that operating system.
Benjamin R.
R&D Software Development Manager
http://www.fluigent.com/

Similar Messages

Premier Element 8 can't open any project on Windows 7

Once again my Premier Element 8 can't open any project on Windows 7 (64-bit). This is same problem that happened to me 6 months ago. I reported it to the online Adobe support, but got no help. Eventually I worked around it on my own. Now the problem is back and I can not open any project, even after rebooting. The behavour that I see is that I can open a new or old project, but the Premier window shows-up as having zero size. The bug has something to do with the Premier program thinking that the window size should be zero. The program shows-up in the active task list, and the Alt-Tab key shows Premier window has only a window title bar (where as other active programs show-up as a thumbnail image of their window contents), and the system taskbar also shows the Premier program as active but only as a window title bar (see attached image below)
When I reported to the online Adobe support forum 6 months ago that I had worked around the problem, the answer was something like "good that you fix it", BUT Adobe did not seem to be interested in understanding and fixing the problem. They just seem relieved when customers can figure-out work-around on their own. I see that another peron just reported this same problem on the Adobe forums, and got the same treatment. He also found a work-around, and the support person replied when "that's nice". This really bites me where it hurts. I'm burning non-productive hours because of their bugs, and they don't care enough about the bugs to get engineering to fix them. It's things like this that make me look for another software vendor.
But today I really do need to work on my video project. If there is a document work-around for the "Premier show a zero-sized window" bug, PLEASE let me know about it.
Thanks in advance for any help you can provide,
-- Ole Pa

Hi Steve,
Thanks for looking at this on Saturday, and for your question. What I mean by a "zero sized window" is that Premier's window has been created and the program is running, but when I give Premier focus nothing is shown on the screen. I know the program is running because I can see it on the Windows taskbar, in the Alt-Tab list, and in the task manager's list of running programs. When I use the Windows taskbar to alternately show and hide the window, it behaves normally, except when I show it nothing shows on the screen. Also, when Premier starts up, I do see it loading the project, but when the project loads the window disappears. Premier has this annoying design of starting with its window maximized, and then automatically resizing the window to what it thinks is the size that I want. When the bug is active, the size seems to be zero, or minimized, or off the screen, or who knows what. Just not anything that I can see. The little thumbnail that Windows 7 shows of running programs on the taskbar makes be think the window has been resized so that it is zero pixels wide and zero pixels high.
In my earlier report of this bug, I described it as "minimizing to the taskbar" because that is what it appeared to doing at that time. Here is a link to my earlier report:
http://forums.adobe.com/thread/704857
That thread has screen snapshots that show the visual atrifacts of the bug on Windows 7. I experienced the same bug again this morning. The workaround that I had done last year did not work this morning. Here is what I did to recover this time:
Uninstalled Premier Elements 8. Deleted my personal setting, and also "smart sound".
Rebooted my PC.
Installed Premier Element 8 from the CD.
Rebooted my PC
Things were still not quite right. In fact the bug appeared to still be there, but all of a sudden it started showing me the window after the project was loaded. Sigh. I will never launch that little startup program again (the one behind the desktop icon), and only open ".prel" files directly. Not sure if that will help or not, but at least it takes one variable out of the startup procedure.
I wish that I could tell you how to reproduce the bug, but in fact I do not know what I do to provoke it. My PC is
- Dell XPS9000 (Intel i7, 3.33GHz, 12GB ram, 4.5 TB disk)
- Windows 7 Ultimate
- Two 24 inch LCD displays
- Runs several Adobe programs (like PS, LR, Acrobat).
Don't get me wrong: I love Adobe software. You are the best in the graphic arts industry. That's why I buy and run your stuff. But when I have a deadline hanging over my head, and I have to spend 1/2 day getting the software to just come up, I get crazy and want to herd feed animals for a living! Maybe I'll have to do that if the economy does not improve in 2011...
Thanks, Ole Pa

Can you restore a project from a single file

Using Windows XP / RH8 & RH7 / RSC 3.1
Is there a single file that lets you restore a project? My co-worker believes this is the case, but I can find nothing in the RH Help, or on this forum using a search term of "restore project", "restore from file", "file types" etc.
I can't find the Help page that has the explanation of each file type, which used to be easy to find.
What we are looking for is an equivalent to the FHB file in ForeHelp. You can restore the complete project from that one file.
I have tried a dozen searches on the forum and get no reponses for anything. Is search even working?
Any info you can provide will be greatly appreciated.
Regards,
Joe

There is no single file that restores the source project. You can reverse engineer a CHM and get close but I don't think that is what you are looking for.
The only single file method is a zip of your project!
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

Why can't I download projects from iPhone to computer through iTunes to clear space on my device?

Why can't I download projects from iPhone to computer through iTunes to clear space on my device?

Yeah, I have this problem too. Since the HD purchase usually includes the SD movie too, I am perfectly content to watch SD on my Windows computer and HD on my AppleTV.
Only workaround I've found for this is to buy the HD version of the movie on my iPad. Then, download it to my computer via iTunes or by transferring it from my iPad. I hear you can buy it on an iPhone too (4 or 4s) and achieve the same result.
But that's a terrible workaround. I have a number of other HD movies I've purchased with previous versions of iTunes, so this is absolutely something that Apple has introduced relatively recently.

I have no problems copying iMovie Events from one Mac to another, however, how can I copy iMovie Projects from one Mac to another?

I have no problems copying iMovie Events from one Mac to another, however, how can I copy iMovie Projects from one Mac to another? Any help will be appreciated. Thank you.

This should give you some good insight, I'd probably store them on an External HD on the old machine and then just drag and drop to the new machine.
https://discussions.apple.com/docs/DOC-4141

How can I move my project from external hard drive to my macbook pro?

How can I move my project from external hard drive to my macbook pro? every time I try to do some editing, the sequence is very slow, thanks in advance

Try here...
Setting-up a new Mac from an old one, its backups, or a PC

Satellite U200-115 - CD Rom error - can't activate the drive from windows

Hi everyone,
I'm having some problems with my DVD rewriter drive on my Satellite U200-115.
It works very intermittently and whenever I power up the machine, the first notice I get is 'cd-rom error' even though there is no disc in the drive.
I can't activate the drive from windows either (icon in system tray).
There is the odd occassion when the drive does work in windows but this is so infrequent that I can't remember the last time (I think it was back in Nov 08).
I want to restore the system as I am getting a lot of windows file icons instead of the proper icons for images e.g. pdf, doc, etc. but am worried that the drive wont read the disc or will stop working during the recovery process.
Any ideas would be gratefully received.
Best WIshes
Nick

If its a software issue the drive will not stop working during the recovery procedure.
Do you get a CD-ROM error in Windows?
You could try to boot from a Linux boot disk. If this work it would be a software problem and not a hardware problem.
Maybe this article from the Microsoft Knowledge Base can help you:
http://support.microsoft.com/kb/314060

Can't open PDF files from Windows Explorer on Windows 8.1

Hello,
after I've upgraded to Windows 8.1, I can't open PDF files from Windows Explorer (directly double clicking the file). The AcroRd32.exe runs in the background (2x !) as I see the processes in task manager, but there is no user interface visible. I have Acrobat
Reader 11.0.06, the desktop version (not Metro). I tried uninstalling the Acrobat reader and installing it again but this didn't help. The only way to open PDF files is to close the AcroRd32.exe from the task manager, open empty Acrobat Reader from the desktop
and then drag&drop the PDF file over that window. This is quite inconvenient. Is there a way to fix this issue so I can open PDF files directly from windows explorer?
Many thanks!

I had to install adobe reader, but PDF's used to display just fine with IE, any idea what happened ?
Windows 8.1 pro.
thx
lee

Can i get my music from windows media onto my iPod shuffle

I lost all the music on my ipod shuffle. It seems that my itunes library is empty. Can I get the music from Windows media player on a pc running windows xp and put it on my ipod? Thanks

your itunes account is your email address. you can try to see if you can sign in. you can always use one of these programs yamipod or music rescue.

Can't copy and paste from windows to firefox(apple)

I have an apple(mac os x). I have parallels desktop 3.0 for this mac.
Problem: can't copy and paste from windows to firefox.

I have a Mac OS X. I bought software for the Mac.(parallels Desktop 3.0 for Mac) so that I could use Windows on my Mac. I have Firefox browser.
I can not copy anything from Windows and Paste it in Firefox.
But I can copy and paste as long as I am not in Windows.
Ray Chambers [email protected]

I have Iphoto library in Aperture. Can I move the projects from iPhoto to aperture project by dragging?

I have Iphoto library in Apeture. Can I move the projects from iPhoto to aperture project by dragging (within the apeture program)? Is this making a duplicate of all the photos? It seems to work?? It then leaves my Iphoto library in apeture empty. I would like to do this just to reorganize the photos between the two. I feel that I may have doubles and would like all pictures of one year in same project in Aperture instead of going between both.

Tell us more, please. I am not quite sure, what you want to do and how you are using Aperture and iPhoto?
Which versions of Aperture and iPhoto are you using?
Do you have separate photo libraries for Aperture and iPhoto, or are you opening your iPhoto libraries in Aperture?
I have Iphoto library in Apeture.
Did you import an iPhoto library into Aperture? And now you are seeing a section "iPhoto Library" in the Aperture projects list in the Inspector?
Events and albums you imported from iPhoto (Import > Library > Some iPhoto Library) will be imported as Aperture projects and albums, and they will behave exactly as other Aperture projects and albums.
Can I move the projects from iPhoto to aperture project by dragging (within the aperture program)? Is this making a duplicate of all the photos? It seems to work?? It then leaves my Iphoto library in apeture empty.
You can drag images from any project in Aperture to other projects and that will move (not duplicate) the images and all its versions to that project. And when you drag all images from the project to another project, the remaining project will be empty and can be deleted. (Caution: Photos that you have hidden in iPhoto will not be visible in Aperture. If you are not sure, if you have hidden photos, open the library again in iPhoto and unhide all photos).
I feel that I may have doubles and would like all pictures of one year in same project in Aperture instead of going between both.
There should be no problem with moving all photos from the same years to the same projects. You can also drag projects in "Projects" view on top of each other. That will merge them.
You could also define smart albums in Aperture to search for images taken at a specific period of time:
File > New > Smart album:
Then, in the Smart Settings HUD, click "Add Rule" and add a Date or Calendar rule.
For example, to find all images taken in 2010, use a rule "Date > Capture Year is > 2010"
To search for Photos taken at a specific date or at several dates, use a "calendar" rule. This way, you do nat have to type the date, but can pick it from a mini calendar.

My 1st ipod was lost. My library is on a Dell with Windows. I registered my new ipod to a Mac. How can I get my library from Windows onto my new Ipod?

My 1st ipod was lost. My library is on a Dell with Windows. I registered my new ipod to a Mac. How can I get my library from Windows onto my new Ipod?

Thank you for your help. I am still having trouble. As you can tell, I am not technologically advanced AT ALL. My music is all showing up in the library but when I go to file in the top left corner, Sync is greyed out and I cannot select it. I'm gonna continue to try this. It's been a long time since I had my 1st ipod and things have changed so much I will probably need to research this stuff. Thanks again for your help.

How can I convert .cp projects from Captivate 2 to .cptx projects for Captivate 7?

How can I convert .cp projects from Captivate 2 to .cptx projects for Captivate 7? Do I have to use some other version between 2 and 7 to do this?

I doubt you are going to be able to find all those previous versions and the time it would take to install, open the project, verify it, and everything in between (and without license keys, they would only be saved from trial versions which would be an issue), it seems it would be better just to start with Cp7 and put the effort into that.
Completely off topic, one of the things I like about Authorware is that Macromedia provided previous versions that would allow you to open up and save the projects to get to version 7. It was a nice little touch they provided for developers. I don't believe that Adobe does this for Captivate though.
Dave

Can't drag & drop images from Windows Explorer into Elements 7

Hi...
I'm a Photoshop Elements 7 newbie... I can't drag and drop images (jpeg, tiff, Olympus RAW) from Windows Explorer (file explorer and not IE) to Photoshop Elements like I can in Corel Paint Shop Pro X2? It also works in Corel Painter IX.5 & ArtRage 3 (except for RAW)... My operating system is Windows 7 Home Premium 64 bit.... I've uninstalled and re-installed Elements but to no avail. I've also tried to run Elements under various compatability modes but still no luck....
Any ideas?
It's driving me nuts...
Thanks kindly
Ken

"I just remembered: If the Editor or Organizer are "running as administrator", then you can't drag and drop from Windows Explorer. To see if you're running the program as administrator right click the desktop icon or Start Menu item you use to launch PS and select Properties. On the Compatibility tab, is Run This Program As Administrator checked? (Note that in Vista and Windows 7, running a program as administrator is different than running it in an account that's a member of the Administrator's group.)"
I wasn't running the program as administrator so I enabled that compatibility property applied it then disabled it. It seems to work now. I thought I'd add this to flesh out the previous answer. I didn't open the program in between the enable and disable, so it is a quick process. Also, I am using windows 8.1 and had to open the file location in order to do this. Right click on the tile then choose 'open file location'

Can I transfer a project from the trial version of Final Cut Pro X to the Full version

Can I transfer a project from the trial version of Final Cut Pro X to the Full version which I have now downloaded.

The trial version is named "Final Cut Pro Trial" and the App Store version is called "Final Cut Pro".
So, they can both be in the Applications folder at the same time, but only one can be open/launched at a time.
If, for some reason, your trial is older (like version 10.0.4) that your newly purchased FCPX (should be 10.0.5), and you do not click Update to your events/Projects, they will NOT show in the bought version!
Open the licensed FCPX and make sure it does update your things, in case it asks for it!

Can I compile my project from windows to work with linux

Similar Messages

Maybe you are looking for