Can I copy one frame of a movie using iMove and save the frame as a file that can be printed like a picture?

Can I copy one frame of a movie using iMovie and save the frame as a file that can be printed like a picture? If so, how do I do that?

You could if you want a postcard sized print.
Printers need a lot more "dots" per inch and even a 1920X1080 video doesn't have enough "dots" to make more than a postcard.
Look at the "More Like This" links at the right side of this page for instructions.

Similar Messages

Can I use my new 4gs on a line different then the one it was upgraded on. I have many phones on my account. I am not eligible for upgrade but I had to buy two new phones for others. Can I give one of them my old iPhone 4 and take the 4gs.?

I have many phones on my account. I am not eligible for upgrade but I had to buy two new phones for others. Can I give one of them my old iPhone 4 and take the 4gs? Thinking maybe switch sim cards? Thanks in advance for any help

Yes.
Just call your provider and tell them what you want and they will help you get it done properly.

I am using Garageband and saving my tunes as iTunes files but can´t find them in iTunes on my computer after syncing. Where are they?

I am using Garageband and saving my tunes as iTunes files but can´t find them in iTunes on my computer after syncing. Where are they?

My answer in the older thread is still valid
Maybe the "iTunes Music" folder is hidden.
Please open Terminal and issue the following command
ls -ladO /epoche/Music/iTunes/iTunes\ Music
you should get a line similar to this
drwxrwxrwx 13 yourusername staff hidden 442 12 Mar 21:49 /epoche/Music/iTunes/iTunes Music
Numbers, date and time may differ.
If you see hidden then the folder is hidden. To unhide "iTunes Music", in Terminal issue the following command
chflags nohidden /epoche/Music/iTunes/iTunes\ Music

HT4889 Hi there, I just get a new Imac, so, I would like to syncronize with my macbook, and keep the same musik, apps, files. what can I do to do that? Thanks

Hi there, I just get a new Imac, so, I would like to syncronize with my macbook, and keep the same musik, apps, files. what can I do to do that? Thanks

Hello there, LeoFerrer.
The following Knowledge Base article provides some great information and steps for migrating your information to your new iMac:
OS X: How to migrate data from another Mac using Mavericks
http://support.apple.com/kb/HT5872
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

How can I uninstall garageband? I don't use it and it just takes up space!, How can I uninstall garageband? I don't use it and it just takes up space!

How can I uninstall garageband? I've never used it and don't intend to. My startup disk is full and I need to dump some apps. Any advice would be appreciated.

GarageBand FAQ: Delete all traces of GB

Can't get Themes to work for movie using iMovie on ipad

I finsished a trailer using iMovie on my iPad successfully and LOVED it! Sooo fun!
Now I'm trying to make a movie for a friend's wedding, but I can't get it to work with the themes. When I select my theme and start a new project using a few pictures the theme music works when I replay, but no visual elements of the theme I selected show up (or available for selection). when I click on the gear wheel, it does show what theme I selected.... What am I missing???? The only place the theme shows up is on the tile in the "projects" section.
Then I tried the same thing on my iphone 4S (iOS7) and the same thing happens.
I looked at the tutuorials etc...and I think Im doing it right (after all, I got the trailer to work perfectly) and I think I'm not technologically challanged - but I just would like to have the theme visual elements to show up.
Please help
Mir

Tap the Transition points and choose the star icon. This is for theme associated transitions including their graphic elements.

How can I copy 8,000 titles of music from my pc to the new updated ITunes. I can no longer copy and paste them

I am trying to copy many titles of music from my pc to the latest I Tunes. I can no longer copy and paste them like I used to be able to do. I need serious help here. Any thoughts or resolutions? Frustrated

See also Repair iTunes Security Permissions and apply the suggested steps to the iTunes folder and the source media folder.
I may be reading too much into things, but is your media stored in a bunch of folders where each folder represents a playlist? If so my script ImportFolderStructure might be useful to you...
tt2

Drag and Drop a .mov into iMovie and, Why the wait?

Alright. This is getting very annoying. Every time I use iMovie, dragging my .movs into the application, I've got to wait about 12-15 minutes for it to "import" it. This is ridiculous. Since I've got 7 .movs to import, it's going to take me a couple hours "tonight" just to import them. Will have to do editing "some other day."
I'm I doing something wrong. What's with the waiting?

.mov is a container, no video codec. a mov can contain dozends of codecs, stills, music, aiff, mp3, aac, qtvr, video, h263, h264, sorenson1/2/3, mpeg1/2/4, divx ... etc.
iMHD6 is a DV-editor, meant to copy (=import lossless) from miniDV devices.. which use 'dv' as codec.
so, if your .mov contain anything else than dv+specific NTSC/PAL settings, the underlying Quicktime engines has to convert it.. a process of high computation = time.
plus, depending on your set-up, that process can take more or less time.. e.g. not enough disk-space 'brakes' the apps ...

Is there a limit to the number of video files that can be included in a captivate 6 project?

I have a project that includes 15 slide video files. When I preview the project in html or publish it, I get a green rectangle where the video should be on about the 10th slide. Even if I rearrange the order of the slides, always on about the 10th one I get a green rectangle where the video should be. Is there a limit to the number of slide videos you can have in a project?

Craig,
It was image.cpp line 2770. I am told (by another person in the company that has seen this) that it has been seen on several machines, always PXI controllers, but not on all PXI controllers. I am told that it is not always image.cpp that reports the error, but for me it was always the same line of code identified by the error message. I did not have a chance to do any experimenting to find a particular threshold number of mnu files. I may be able to find error logs. I currently sent the controller to our IT department, doing a windows XP repair, just in case there was something corrupted in the system itself.
The error was reproducible. This installation at one time must have included real-time / FPGA, because on the opening screen I ge the drop-down ring for selecting a target. If I click on this drop down ring, I get the crash on line 2770, every time. If, instead I open an empty new VI, I am able to switch to the block diagram by selecting the window directly with the mouse, but if I try to pull down on the "window" menu to do "show block diagram", I get the crash on line 2770, every time. Because the user-defined mnu files are now deleted, I would have to create them again, or find a way to reinstall them, to reproduce the error at this point.
Vinny

How can I increase the number of .pdf files that can be open at once from 20?

I like the new integrated pdf viewer in Firefox a lot because I'm constantly browsing datasheets at work. However, it seems to have a limit of 20 simultaneous files. The machine I'm working has no danger of running out of memory any time soon, so is there a setting I can change to increase this limit?
Thanks.

hello michael, this limit is not directly related to pdf-files in the internal viewer, but you can try the following to work around the issue: enter '''about:config''' into the firefox location bar (confirm the info message in case it shows up) & search for the preference named '''dom.workers.maxPerDomain'''. double-click the preference and set it to a higher value.

I can´t update my nano 6th generation to 1.1 and got the 3259 error message. How can I solve this?

Can anyone tell me how to do it?

Check for hardware issues
Try to restore your iOS device two more times while connected with a cable, computer, and network you know are good. Also, confirm your security software and settings are allowing communication between your device and update servers. If you still see the alert when you update or restore, contact Apple support.
Common errors: 1, 10-47, 1002, 1011, 1012, 1014, 1000-1020.
Configure your security software
Check your security software and settings, which can block ports and prevent connection to Apple servers during update and restore.
Common errors: 2, 4, 6, 9, 1000, 1611, 9006, 9807, 9844. Sometimes as a result of this issue, a device might stop responding during the restore process.
Try on another computer.
Last
Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

I just finished creating a movie in IMovie and now want to burn it to a DVD and make it loop. Since I just purchased this IMac it no longer comes with IDVD. My question is how to burn and loop a dvd without IDVD. Thanks for any help.

I just finished creating a movie using IMovie and want to burn it to a DVD and loop it. Since I just purchased this mac it looks like they no longer include IDVD. Is there something out there to help me do this. I am new to MAC and any help would be greatly appreciated. Thanks

There is free open source software called Burn that will burn DVDs. Here is a link.
If you wish to pay for software, there are many, including TOAST TITANIUM from Roxio. Apple's retail copy of iLife 11, and Apple's Compressor.
Of these, I would say that iDVD is known for being able to create very professional looking DVDs with intros, menus, lots of interesting templates.
Toast is much simpler and the menus and templates are more plain.
Compressor is a professional tool that does a lot more than make DVDs. Don't expect much in the way of menus or templates.
Burn, I have never tried, since I have iDVD and Toast for those ocasions when I need to burn a DVD. However, since it is free, I think it is worth a try.
Each software package is a little different, but in general, in iMovie, you can use the SHARE menu to SHARE/MOVIE in Large size. Save the movie to your desktop or someplace you can easily find it. Then drag it into the tool of your choice. You can alsouse SHARE/MEDIA BROWSER/LARGE if you have iDVD or Toast.

Max number of files that can be opened in harddrive through AEBS?

What is the maximum number of files that can be opened in a external hard drive (Lacie 500 GB, USB 2.0) connected through the AEBS? Looks like there is a limit.
When I am trying to 'seed' files through a bit-torrent client (Azureus 2.5.0.4) many of them give an error "Error: too many open files". I never had this error before.
When I tried to delete a file in the hard drive, I got the error "too many open files". Then I stopped 'seeding' in Azureus and I was able to delete the file.

Thanks Chris, it has almost become unwieldy now at this stage ... I'm actually thinking of calling another template for certain sections
I belive this is possible..

I have created several short (3-5 minute) movies using iMovie 10.0.6 and Yosemite. I want to create one movie that includes these short movies that I can then either burn to a DVD or show in iMovie's Theater. How can I do it?

I have created several short (3-5 minute) movies using iMovie 10.0.6 and Yosemite. I want to combine those short movies into one movie that I can loop and burn on a DVD or show in iMovie Theater. How can I do it? The movies are now shared to iTunes.

Another easy way to fix this.
What I've noticed is that upon upgrading your projects and events to work with iMovie 10, initially it will work... Until you quit iMovie and reopen it again. Any events with hashtags will show up without the star next to the iMovie event. SO, if you happen to read this, after upgrading to iMovie 10 from its predecessor, immediately change the event name to NOT include a hashtag/pound symbol.
Otherwise, if it's too late, you can either do the above or this...
Hold down option and click on iMovie. This will prompt you Locate, Create a New Library, Cancel this window, or Choose a different library. What you want to do is create a new library, call it whatever you want to, this will only be temporary. After the program opens, it should be a blank Library. Then go to File > Open Library > iMovie Library (your original library) and proceed to change the name of your events. Quit the program. Go into your Movies folder in Finder, delete the library you temporarily created, and your back in business.

I have many hours of home movies copied years ago to DVDs. Can I edit them using iMovie? All the Help instructions assume that you will be transferring info from cameras.

I have many hours of home movies copied years ago to DVDs. Can I edit them using iMovie? All the Help instructions assume that you will be transferring info from cameras not from DVDs.

See my User Tip here.
https://discussions.apple.com/docs/DOC-3951

Can I copy one frame of a movie using iMove and save the frame as a file that can be printed like a picture?

Similar Messages

Maybe you are looking for