Can i create an exetutable (.exe) program with java???????

I would like to learn how i can create an exetutable (.exe) program with java.
Is there any additional package which i should download or buy it?
Also i would like to write files into CD's direct from my application.
Is there any library which i must download or buy?
Thanks!

check out the free open source GNU gcj native compiler for Java to see if it will do what you want.
http://gcc.gnu.org/java/
for writing data files you could use java.io.BufferedWriter. For sound files, look in the javax.sound package

Similar Messages

Can't create engine: a new feature with Java Plug-in 1.6.0-beta2 ?

Hi
We use Java.Help embedded in an applet to check small pieces of text. The whole things works without problems until recently: the full text search does not work anymore when the applet is called with http, it does work when it is called as File in the browser. I suspect the automatic upgrade of JRE 1.6.0-beta2 is related to this.
I have tried to put
grant codeBase "http://www.unifr.ch/dokpe/procedures/procall.jar" {
permission java.security.AllPermission;
}in my security file but it does not change the problem.
The url is http://www.unifr.ch/dokpe/procedures/index.htm
Thanks for any help
Fran�ois Rappaz
The complete error stack is
MergineSearchEngine: params: {engine=com.sun.java.help.search.DefaultSearchEngine, data=_jhs}
Exception while creating engine named com.sun.java.help.search.DefaultSearchEngine for view: javax.help.SearchView@dfe303
java.lang.reflect.InvocationTargetException
 at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
 at sun.reflect.NativeConstructorAccessorImpl.newInstance(Unknown Source)
 at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(Unknown Source)
 at java.lang.reflect.Constructor.newInstance(Unknown Source)
 at javax.help.search.MergingSearchEngine.makeEngine(MergingSearchEngine.java:169)
 at javax.help.search.MergingSearchEngine.<init>(MergingSearchEngine.java:63)
 at javax.help.JHelpSearchNavigator.getSearchEngine(JHelpSearchNavigator.java:102)
 at javax.help.plaf.basic.BasicSearchNavigatorUI$SearchActionListener.actionPerformed(BasicSearchNavigatorUI.java:110)
 at javax.swing.JTextField.fireActionPerformed(Unknown Source)
 at javax.swing.JTextField.postActionEvent(Unknown Source)
 at javax.swing.JTextField$NotifyAction.actionPerformed(Unknown Source)
 at javax.swing.SwingUtilities.notifyAction(Unknown Source)
 at javax.swing.JComponent.processKeyBinding(Unknown Source)
 at javax.swing.JComponent.processKeyBindings(Unknown Source)
 at javax.swing.JComponent.processKeyEvent(Unknown Source)
 at java.awt.Component.processEvent(Unknown Source)
 at java.awt.Container.processEvent(Unknown Source)
 at java.awt.Component.dispatchEventImpl(Unknown Source)
 at java.awt.Container.dispatchEventImpl(Unknown Source)
 at java.awt.Component.dispatchEvent(Unknown Source)
 at java.awt.KeyboardFocusManager.redispatchEvent(Unknown Source)
 at java.awt.DefaultKeyboardFocusManager.dispatchKeyEvent(Unknown Source)
 at java.awt.DefaultKeyboardFocusManager.preDispatchKeyEvent(Unknown Source)
 at java.awt.DefaultKeyboardFocusManager.typeAheadAssertions(Unknown Source)
 at java.awt.DefaultKeyboardFocusManager.dispatchEvent(Unknown Source)
 at java.awt.Component.dispatchEventImpl(Unknown Source)
 at java.awt.Container.dispatchEventImpl(Unknown Source)
 at java.awt.Component.dispatchEvent(Unknown Source)
 at java.awt.EventQueue.dispatchEvent(Unknown Source)
 at java.awt.EventDispatchThread.pumpOneEventForFilters(Unknown Source)
 at java.awt.EventDispatchThread.pumpEventsForFilter(Unknown Source)
 at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
 at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
 at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
 at java.awt.EventDispatchThread.run(Unknown Source)
Caused by: java.security.InvalidParameterException
 at com.sun.java.help.search.DefaultSearchEngine.<init>(DefaultSearchEngine.java:75)
 ... 35 more
MergineSearchEngine: startSearch()

I have found a thread in another forum with the same problem, I think: http://forum.java.sun.com/thread.jspa?forumID=42&threadID=616794
One more point: I have remove the Plug-in 1.6.0-beta2 and use now the 1.5.0_06 version: I can use the full text search without problem !
any idea someone ?
Fran�ois

Can i create & use ms-word files with java?

I am making an application in which I need to write some information into a formatted ms word document. I am familiar with writing into a .txt file, but have no idea how to create / or even add info taken from text fields and insert it into an exixting word file. If anyone has any ideas or code frags I would really appreciate the help. Thanks

Provided that you are on a Windows machine and that Word is installed, you can manipulate an instance of the MSWord ActiveX control to create documents (that's how we do it). See:
http://danadler.com/jacob/

What html code will start an EXE (program) with a click on a webpage link?

The code in bold below worked. After I switched my browser from IE 11 to Firefox to get the hover on hotspots to work, the program gave me this error message. I moved the EXE file to my local file folder and tried it as shown below. Still no success. Any suggestions?
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<title>Family Tree Charts</title>
<meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1" /><style type="text/css">

</style></head>
<body link=blue vlink=blue>
<table width="100%" height="25" border="0" cellpadding="4" cellspacing="0">
<tr>
 <td width="93%" height="27" bgcolor="#EFEFEF"> <div align="center">
 This Software Allows You To Review Neat Charts of Your Family Tree </div></td>
 <td width="7%" bgcolor="#CCFFFF"> <div align="center"><A href="Mementos_Menu.html">Back</a></div></td>
</tr>
</table> <center>
 
Click the link below to download a special software program for your PC. 
 
<a href="http://jdmcox.com/">Cox Website</a> 
ITEM 1 (AT THIS WEBSITE) IS THE FAMILY TREE CHART PROGRAM. 
It is called Simple Family Tree 
<table width="80%" border="2" cellspacing="2" cellpadding="2">
<tr>
 <td width="49%" align="left" valign="top">Click the link below to use this special software program after you download and install the program. 
 

<a href="C:\Users\Tom and Polly\Documents\Genealogy CD\Simple Family Tree\Simple Family Tree.exe">Family Tree Charts Program</a> 
Click the "run" button for both warning messages. 
Click the "READ THIS!" menu option when the program opens. 
Click "X" in the upper right to close the program. 
You can update the family data in future years with this program too.
 </td>
 <td width="51%" align="left" valign="top">NOTE 1: Be sure your HTML code for this webpage has a proper line to link to the location where the software was installed. You can use NOTEPAD to make HTML code changes. My existing line is: 
 "c:\program files (x86)\simple family tree\simple family tree.exe" 
 The underlined portion will need to agree with where the program was installed. Just change the directory (see underlined sample above). Good luck. If I am still living, call me. 
 NOTE 2: After you download, install, and try to use the program, you may get an error message window that looks like this -"0 FAMS @F191 @ FAM". This means you have an individual record in your GEDCOM file that does not have a parent. Be sure all GEDCOM records have at least one parent even if you must name the parent UNKNOWN.</td>
</tr>
</table>
 </center>
<table width="100%" border="0" cellpadding="2" cellspacing="0" bgcolor="#CCCCCC">
 <tr>
 <td bgcolor="#EFEFEF"> ©2002 Sales and People</td>
 </tr>
</table></body>
</html>

Herbert:
Here is my latest code attempt, but I get messages about the lines in BOLD that I do not understand.
Perhaps you will see what I need to fix. Sure appreciate what you have found and shared with such a neophyte (aka dumbo).
Tom

function RunExe(path) {
try {
var ua = navigator.userAgent.toLowerCase();
if (ua.indexOf("msie") != -1) {
MyObject = new ActiveXObject("WScript.Shell")
MyObject.Run(path);
} else {
netscape.security.PrivilegeManager.enablePrivilege("UniversalXPConnect");
var exe = window.Components.classes['@mozilla.org/file/local;1'].createInstance(Components.interfaces.nsILocalFile);
exe.initWithPath(path);
var run = window.Components.classes['@mozilla.org/process/util;1'].createInstance(Components.inteinterfaces.nsIProcess);
run.init(exe);
var parameters = ["/c start Simple Family Tree.exe"];
run.run(false, parameters, parameters.length);
} catch (ex) {
alert(ex.toString());
This Software Allows You To Review Neat Charts of Your Family Tree
Back
Click the link below to download a special software program for your PC and your GED file.
*Cox Website*
ITEM 1 (AT HIS WEBSITE) IS HIS FAMILY TREE CHART PROGRAM.
It is called Simple Family Tree
Click the link below to look at my GEDCOM file contents. Instructions are provided in the READ THIS menu option at the top of the window.
*Show Yarnall Chart*
*Return to this webpage by clicking on the backarrow after looking at the chart.
You can update the family data in future years with this program too.*
©2002 Sales and People
Date: Thu, 2 Jan 2014 02:09:18 -0800
From: [email protected]
To: [email protected]
Subject: What html code will start an EXE (program) with a click on a webpage link?
 Re: What html code will start an EXE (program) with a click on a webpage link?
 created by Herbert2001 in Dreamweaver support forum - View the full discussion
Perhaps this might be helpful:
https://addons.mozilla.org/en-US/firefox/addon/opendownload-10902/
It allows executables in Firefox to be run - it is an extenstion, though, so it must be installed in Firefox before your page will work.
Another option is this solution, but it will still require a manual change in Firefox:
http://forums.mozillazine.org/viewtopic.php?f=19&t=803615
Or this: http://stackoverflow.com/questions/6472435/running-exe-in-firefox-why- do-i-get-an-error
However, you will still have problems with getting it to work cross-browser. Honestly, browsers are not supposed to have access like that to the client side file system, which absolutely makes sense for the web.
That is why you may have to approach the solution from a different angle - perhaps create a server side cloud version of your application(s) which can be easily accessed and run by your family members. I believe you used C to develop the applications? Although I have no experience with this framework, Wt might be a solution to convert your projects to server side applications:
http://www.webtoolkit.eu/wt
Good luck!
 Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5972893#5972893
 Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5972893#5972893
 To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5972893#5972893. In the Actions box on the right, click the Stop Email Notifications link.
 Start a new discussion in Dreamweaver support forum at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

How to create tcode for modulepool program with selection screen?

hi,
How to create tcode for modulepool program with selection screen?
thanks,
sagar

Hi,
We need to goto SE80.
In our program we right click on object name and goto create
-> transaction. Enter the module pool program and screen number and save and activate.
Or by SE93 also we can create a transaction code for our program.
Hope ths helps.
plz reward if useful.
thanks,
dhanashri..
Edited by: Dhanashri Pawar on Jul 22, 2008 8:29 AM

How can I create a new TC backup with ethernet, so I don't have to wait two days for a new wireless backup?

How can I create a new TC backup with ethernet, so I don't have to wait two days for a new wireless backup?
Several times in the last year, I've gotten a message that Time Machine needs to completely redo my backup. Using the wireless connection, this takes almost two days. Is there a way to do the backup with ethernet and then switch back to wireless? Thanks.

May I know what is needed to make sure the MacBook is able to see Time Capsule on ethernet?
Connect an Ethernet cable from one of the LAN <-> ports on the 2Wire gateway to the WAN port (circle of dots icon) on the Time Capsule.
If AirPort Utility cannot "see" the Time Capsule now, you will need to perform a "hard reset" by holding in the reset button for 7-8 seconds or so and then reconfigure the Time Capsule. You can use the same Time Capsule name and password, etc. as before.
Configure the Time Capsule to "Create a wireless network" and select the Bridge Mode option when it appears during the setup using AirPort Utility.
Once the Time Capsule is configured, restart the entire network again. Power down everything, start the 2Wire first and then start each other device after that one at a time about a minute apart.
Now you can connect your Mac directly to one of the LAN <-> ports on the Time Capsule for the backup using another Ethernet cable. In general, about 20-25 GB per hour will transfer.
The Time Capsule will broadcast a much faster wireless network than the 2Wire can provide, so you might want to leave the setup "as is" for awhile after the first backup is complete. If you decide to use the Time Capsule as your main wireless access point, you would want to turn the wireless off on the 2Wire since two wireless networks in close proximity can create interference problems.
Or, if you want to use the wireless on the 2Wire, you could turn off the wireless on the Time Capsule. Then backups will occur over the 2Wire wireless, or over Ethernet.
I don't really recommend the "Join a wireless network" setting on the Time Capsule for most users, but you could go back to that setup as well if you want after the first backup is complete.

Can we create the Application name starting with Numerics

Hi All,
can we create an application name stating with number like 1234Samsung.
Also can we use the special characters between them.
Also are there any rules for creating database names other than maximum 8 characters limit.
Regards

Hi,
1. You can create starting with numerics, 123samsu.
2. samsung cannot complete ,the know reason is exceeding 8
Sandeep Reddy Enti
HCC
http://hyperionconsultancy.com/

Can I create a website like Twitter with Creative Cloud?

Can I create a website like Twitter with Creative Cloud?

Start with jQuery Calculation plugin. Tweak values as required.
http://www.pengoworks.com/workshop/jquery/calculation/calculation.plugin.htm
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
http://alt-web.com/
http://twitter.com/altweb
http://alt-web.blogspot.com/

OSX 10.4.10, Net beans and Sams Programing with JAVA

I am brand new to Java so I downloaded Net Beans on my MAC. I bought a copy of Teach Your Self Programing with Java in 24 hrs.
So far I got the first three programs to compile on Net Beans but got stuck when they started to talk about arguments. The following will not compile. Starting at line 2
1) System.out.println("The " + arguments [0]
2) + " " + arguments[1] + " fox "
3) + "jumped over the "
4) + arguments[2] + " dog. ")
I get the little red x on each line.
Is the book wrong or am I missing something?
All the tutorials talk about Javac. I can't seem to find it or get to it on my computer. How do I know if I even have it?
And is there such a thing as a "command line" on a MAC?

Hi, you should put any code you post in between code brackets like this:
code here I dont use a mac or netbeans but javac is the java compiler, you would not have been able to compile the first two. The .exe (or whatever mac executable is) is usually located in the lib folder in the java directory. It comes when you download JDK. As for the code, it would help me if you posted the first couple lines of the error message. It looks fine to me, but I would need to see your whole class in order to help you further
and yes there is a command line on a mac...i think its called terminal and usually looks like a little computer
Edited by: jaredL on Sep 20, 2007 7:45 PM
Edited by: jaredL on Sep 20, 2007 7:47 PM

Creating a drawing (CAD) program in Java

I'm in the planning stages of creating a drawing/drafting program in Java, and I'm fairly new to Swing, so I need some guidance.
For a drafting program, I will need to be able to draw all kinds of objects using lines, curves, etc, connected in various ways. One thing I could do is extend JComponent and override the paint() method, and have it put up all the various objects as it repaints. The problem with this is that if a user clicks on an object, how will I detect which object he clicked on? I'll get mouse coordinates, but then how do I go from that to knowing that he clicked on a certain curve, etc?
The alternative is to not extend JComponent, but rather to make each of the individual objects on the screen its own component and then lay them out using absolute positioning. Then I'll get mouse events as the user clicks on things. Is this a better way to do it? And if so, I guess I'll still need to create individual components that represent lines, arcs, curves, etc?
Swing has so many features that it's hard for a beginning to get started into it. Thanks for any tips.

Personally I wouldn't work with Swing for this functionality,
but I would rather work with java 2D instead.
Swing contains to much overhead for the kind of application you plan to develop.
Look for the java.awt.Shape interface and to the java.awt.geom.* implementations of such shapes.
It contains already most of the functionality required for painting and hit-detection of a shape on the
screen.
kind regards,

Never programmed with Java

Hello
I have never programmed with Java, and dont know, what i can do, I use PHP, but, i am only a novice at it.
I was wondering, is it possable to get data from a page, and put it into an image? if there is no data from the page, it will ask for the data to be added, and this will update every so often?
Also, Most of you know about google maps, where you can search for something, well, can i do this same thing in java, have a map, not of the earth, but for a game, and make it easy to add different parts, so that we can search for it, and people can find it easy to look for what they are looking for?

I think Google Maps is programmed in JavaScript using AJAX (short for Asynchronous JavaScript and XML) and is what as known as a web application. Google has released an API (still in beta) for working with Google Maps. The webpage for this API is http://www.google.com/apis/maps/. More about the development facilities Google provides can be found at http://code.google.com/.
I've never read the source code to Google Maps before (a lot of which is available by just viewing the source code of the Google Maps webpage, which can be done by clicking, View > Source in Internet Explorer and View > Page Source in Mozilla Firefox), however I don't think it is a terribly complex application (this does not mean, however, that the source code is easy to read). I think the way it works is by requesting individual images as needed from the Google server and piecing them together on the client side (i.e. in the browser). Basically what you would need to do to use their existing code is to replace all requests made to the Google server with requests to a server of your own and have the server return the corresponding images. This might not be particularly easy to do.
In my opinion, a better approach is just to write your own custom application (probably in Java) which simply mimics the behavior of Google maps, except with your own custom images. This way, you don't have to reverse engineer an entire web application before beginning to write one.
Writing your own application for this purpose is not as difficult as it sounds, especially not in Java. Once understanding the basics, you will not be too far off from being able to write your application.
Let's start with the most basic program (this program would be located in a file called Program.java):
public class Program {
public static void main(String[] args) {
}This program simply starts, does nothing, and exits. I will explain this piece of code line by line, but first, I would like to gauge how much you already know to figure out how best to explain this. Have you used classes in PHP before?

TSR programming with java

How can i write a simple TSR program in java (one that stays in ram and is loaded to ram at boot)?

Haven't seen that acronym for YEARS! Anyway, if you want to start something automatically when Windows (not DOS) starts up, just make sure you can run it via a shortcut. Then put that shortcut into your Startup folder, the one you see when you click Start, Programs, Startup. You can't run any Java program before Windows starts because the java.exe program itself is a Windows executable.

How can I create an Install.exe(Application file)

I need urgent help on how to create an Install.exe (Application file) for my java programs.
I have compile the java file and run the programs within Jbuilder35 all worked well. I even created a single jar file for all the programs classes file. But my problem was how to create Install.exe (Application file) in other to be able to use it as an application in any computer.
I mean, for example: Jbuilder35 was developed with java file, and I installed (JBuilder Install.exe, application file) in my computer before I could be able to use it. That is exactly what I dont know how to do it with my java programs that I developed. Any help please?.

Use InstallAnywhere. They have a free trial addition.
http://www.zerog.com/downloads_01.html

How can I create more than one program shortcuts in LabView Installer?

I have builded 3 executable files in LabView Application Builder. I want to create an installer (using the same application builder) that can copy the 3 files to the same destiny directory, install the Runtime Engine and create (in the same program group) 3 shortcuts for the executables. Is it possible with LabView Installer?

The Application Builder does not offer this option. It is really intended as a basic installer builder. However, you can use other software packages to enhance your isntaller. There are many third party installer builders that you can use to modify the msi file which the application builder create for you. You might want to check one of those out and use it for your application.
J.R. Allen

Can we create new cref.exe

Hi all,
suppose if we modify the source code present in java card framework and then compile them to class files, converting these class files to JCA files , generating mask files from these JCA files, and using these mask files along with C code available to create new cref.exe
Is it possible to do the above steps.
Thanks in advance
murali

920553 wrote:
can we create new LOV's using forms personalizationhttps://forums.oracle.com/forums/search.jspa?threadID=&q=personalization+AND+LOV&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
Thanks,
Hussein

Can i create an exetutable (.exe) program with java???????

Similar Messages

Maybe you are looking for