Can I create handouts for digital viewing during my presentation?

Does anyone know of an app or website where I can post handouts for my audience to view during my classroom presentation?

The common way to do this is to create PDF files of the handouts and use Preview or Adobe Reader to display.

Similar Messages

  • How can I create a full-screen view of Keynote slide in Snow Leopard?

    How can I create a full-screen view of my Keynote slides in Snow Leopard?
    I'm going to be importing into ScreenFlow to create a video.
    Thank you!!

    Welcome to Apple Support Communities.
    Do you want static screen captures or motion video of slides as titles, bullet points, and the like are presented?
    Run the Keynote slide presentation in full-screen mode, then...
    Static full-screen captures - use Command+Shift+3.
    Static partial-screen captures - use Command+Shift+4 and use cursor to select the area of the screen to capture.
    If you want motion video as builds occur, why not use Keynote's built-in Share, Export function?
    (I'm on iLife '09.)
    Also understand that the default slide format for Keynote is 1024x768, not full-screen MacBook 1280x800 screen size, so you'll have wide black borders unless you change the default size or crop the finished screen captures.
    Message was edited by: kostby

  • How to create EVENTS for a View Cluster.

    Hi Tech Gurus,
    I have created a view cluster on 5 tables. I need to do a validation and this can be done by using events. But i am unable to create a EVENT for the View Cluster. Could anyone please tell me how to create events for a View Cluster.
    Thanks in advance for your esteemed replies.
    Regards,
    Raghavendra Goutham P.

    Hello Pasapula
    When you are in the View Cluster maintenance dialog (SE54) click on dialog "Events".
    Below the field for the view cluster you have an additional field <b>FORM routines main program</b>. There you have to add the main program containing the FORM routines called by the VC events.
    For example: I had defined a normal report containing an include with all the FORM routines. The report contains only the following lines of coding:
    report zus_0120_u1.
    * Common Data und access routines for user exits in VC maintenance
    include LSVCMCOD.
    include  zus_0120_f1. "FORM routines for VC events
    Now in the "Events" dialog of the view cluster maintenance you assign your FORM routines to the events.
    Regards
      Uwe

  • How to create variant for table/view ?

    Hi,
    When I go through SM30, I find a radio button called variant. I don't know the effect.
    Can anyone tell me how to create variant for table / view ?
    I want to know when we need to create variant for table/view.
    Best regards,
    Chris Gu

    hi ,
    Whenever you start a program in which selection screens are defined, the system displays a set of input fields for database-specific and program-specific selections. To select a certain set of data, you enter an appropriate range of values.
    For further information about selection screens, refer to Selection Screens in the ABAP User's Guide.
    If you often run the same program with the same set of selections (for example, to create a monthly statistical report), you can save the values in a selection set called a variant
    Procedure
    To create a new variant:
           1.      On the ABAP Editor initial screen, enter the name of the program for which you want to create a variant, select Variants, and choose Change.
           2.      On the variant maintenance initial screen, enter the name of the variant to be created.
    Note the naming convention for variants (see below).
           3.      Choose Create.
    If the program has more than one selection screen, a dialog box for screen assignment appears. The dialog box does not appear if the program only has one selection screen. The selection screen appears in this case.
           4.      If there is more than one selection screen, select the screens for which you want to create the variant
    5.      Choose Continue.
    The (first) selection screen for the report appears.
    If your program has more than one selection screen, use the scroll buttons in the left-hand corner of the application toolbar to navigate between them and to fill the fields with values. If you keep scrolling forwards, the Continue button appears on the last selection screen.
           6.      Enter the desired selection values, including multiple selection and dynamic selection.
           7.      Choose Continue.

  • Can i create mcx for shut down properly mac when battery is less 5 %

    Hi hello
    Can i create mcx for shut down properly mac when battery is less 5 % ?
    Thanks for your reply

    You can create a mailing list by using the "Groups" feature of Address Book. Simply select "New Group" from the File menu. Name the group, and drag the contacts you need into the group.
    In Mail, open up Preferences (under the Mail menu), and click on "Composing". Then make sure that "When sending to a group, show all member addresses" is unchecked.
    The auto reply is a feature that is better done on your mail server, as you Mac can only send an auto reply when it is on, with the Mail application open. If you use dot Mac, you can set up a vacation responder through the web, and you can leave your computer switched off.
    If you really want to leave your Mac on when you are on holiday, you can set up a mail rule (Preferences, Rules).

  • How can I create index in a view?

    Dear all,
    How can I create index in a view?
    Best Regards,
    Amy

    A view is a stored query. It gets executed at run time. A view does not occupy any physical space in the database (other than the insignificant amount of space required to store the query in the data dictionary).
    A materialized view actually materializes the results of a query in a separate table structure, so it consumes physical space in the database. It also has to be refreshed at some interval, either synchronously with DML or asynchronously on a set interval.
    Justin

  • Can we create installer for  Java projects ?

    when we create any desktop application using swing. Can we create installer for that application that will include all the files, which is required to run that application including data base. Data base is Mysql and in some case it might be MS Access.
    We can create the jar files for this and deploy. But other then this ...
    Is it possible to create ?? If anybody have idea then plz give me steps how to do this ??
    welcome in advance for reply...

    MukeshSinghRathaur wrote:
    when we create any desktop application using swing. Use [Java Web Start|http://www.java.com/en/download/faq/java_webstart.xml] *(<- link)*
    ..If anybody have idea then plz give me steps how to do this ??Please take the effort to type all 6 letter of the word 'please'. Also - one '?' indicates a question, whereas 2 or more often indicates a bozo.
    Do some research, ask a specific question. These forums are not designed as a 'help-desk' where people will hold your hand and tutor you as to how to do things.

  • Can we create routine for PO excise duty should calculate at basic amount

    Dear All,
    can we create routine for Purchase order excise duty should calculate at basic amount not after discounted value.
    actually at per current  scenario  system is calculating excise duty after discount base amount, but
    we want to write a routine/scenario excise duty should calculate at basic value not after discount value.
    Regards
    chandrashekar

    Hi,
    In my opinion you have two alternatives to resolve your problem:
    1. To customize some special solution for this; this can be made by adding a new pricing condition similar with the VAT pricing condition (let's call it ZMWS); this pricing condition should be as absolute value and accepted as manual in the document / pricing procedure
    2. Something similar to your solution (I have used this for some customer) to have in the credit memo two lines, one with VAT and one without VAT; the one without VAT should have a negative price = price from the line with VAT.
    For this second solution I would recommend you to have two different special materials "DUMMY" materials, lets say "DUMMY without VAT" and "DUMMY with VAT"
    BR,
    Valentin

  • Can I create books for iPhone using iBooks Author?

    Can I create books for iPhone using iBooks Author?

    There is a new $5 iBooks Creator app in iOS app store for the iPad.
    The output looked pretty good for an iPad app.
    There is a video on how to use it to give you an idea of how easy it is.
    It creates ePub 2 whihc can be read on all platforms with an ePub reader except Amazon Kindle whihc forbids such things.
    You can run the ePub through Calibre and get MOIB for Kindle which works for me.
    I have done thirty or forty conversions so far.

  • Can I create books for the iBookstore for iPad and iPhone using Pages?

    Can I create books for the iBookstore for iPad and iPhone using Pages?

    No problem, Peter. iBooks Author makes a lot of things much easier than trying to grapple with a standard epub, but it also has some big limitations, like iPad only, and ibookstore only.
    EDIT It's not really suitable for something like a novel, for example, although it's great when you need lots of illustrations and movies and such.

  • Printer: can't create PDFDocumentRef for `/private/var/spool/cups/tmp/'

    Just moved from Tiger to leopard 10.5.2
    Using an Hp deskjet 3650 which worked last week in Tiger. Now, no matter what I try to print, I get errors like the following:
    can't create PDFDocumentRef for `/private/var/spool/cups/tmp/480cbc6235144'
    To the best of my knowledge, I installed every possible printer driver from the DVD

    OhhhhKayyy ... I went to http://tinyurl.com/3r8d85
    a ww1.hp.com address ...
    installed /OSXHPInkjetInstaller.dmg
    tried same print and get same failure:
    first I get this:
    /usr/libexec/cups/filter/pstopdffilter failed
    then the topic error named

  • "Can't create part for model element: null"

    Hello Colleagues,
    I am developing a Widget using Eclipse. Yesterday I closed the project and today I tried to open it again. For some reason, it seems that the config.xml file is corrupted. When I open the editor, I receive the following error:
    "Can't create part for model element: null"
    I tried to find out where in the xml file is the error, without success.
    Do you have any clue to get it solved?
    If you need some more information, please let me know.
    Thank you very much!
    Rafael

    Hi Rafael,
    What version are you using? I have had similar problems in the past. Worst case I had to recreate the widget and copy the coding across.
    Can you send me the project file, I will understand also if you do not want to, I will try it on my machine.
    Regards
    John

  • Can't create payment for the invoice created by DI Server

    I can not create payment for my invoice that created by DI Server.  The error -2028 appears. I investigated this issue and found that the OINV.CtlAccount is empty. After I filled it manually, I can create the payment for it. Any suggestions? BTW, the version used is SBO2005B.

    It's resolved by apply the patch. Before that, I create a trigger as the work-around

  • Can I create forecast for captive consumption

    Can I create forecast for captive consumption ( internal business unit ) in APO. If yes how to configure it.

    The business scenario is - For external customers the field executives at different zones are giving forecast and based on capacity availability and other factors we are finalizing the net requirement in DP and we are transferring to R/3. For captive consumption i.e. other business units in the same organization ,STR 's are being created in our BU directly after MRP run in respective business units
    We are unable to measure the forecast variance for our internal customers.
    The advantage is if we add the captive consumption also in DP and if STR 's also consumes from the demand, then we can get forecast hit ratio directly for all.

  • How can we create Versions for Products in SAP CRM

    Hi All,
    We want use Product Versions in our CRM IC Webclient. We want to be able to select a product and then have a list of versions to pick from. Can anyone tell me if they have configured Versions for Products in their SAP CRM system. If yes, then how did you go about it.
    Thanks,
    Ramesh Nallabelli

    Hi Arup and Shanthala,
    Thanks for the prompt responses. Appreciate your help. We want to create Product versions like this: Product: Windows OS Version: 95, 98, XP, Vista, 7, etc.
    When I try to create a configurable product, using the Configuration tab, to create or use a product model I see an error message: PME installation with errors The long text is: The environment variable PME_HOME that includes the PME application has to exist locally in order to start the PME from CRM.
    This indicates the configuration of IPC in our CRM system. This is something that we have not undertaken so far.
    When I use the Poduct Variants tab to create a product variant for a configurable product, I can't edit here. This view opens in a display only mode. After reading some more about this, It looks like variant configuration needs to be used in tandem with ERP variant configuration. There might also be a need to recreate this in the Java configuration engine. We are going to create these products in CRM only, so this might not work for us.
    Regards,
    Ramesh

Maybe you are looking for