Can I display only negative values in an X-Y graph

I have my graph set up to run reading two arrays. It is a sine on sine wave and I only want to display the negative results. Is there a way to do this? Is it possible with something like a scan from function? In the end I will be linking this up to an absolute value and having only the negatives be positive, but getting the graph to display only the negative values is the first step.

You can use the Threshhold 1D Array to filter out all values greater than 0.
Cory K

Similar Messages

  • How to display only Negative values in the report.....

    Hi,
    I want to display only negative values for one particular column.
    Any suggestions ?
    Thanks,
    Jeetu

    Hi,
    define a condition for all characteristics and for specially the keyfigure. Set it to < 0. That should do the trick.
    regards
    Siggi

  • How can I display only one value of a field with two or more values?

    Post Author: skiabox
    CA Forum: Crystal Reports
    I have a field in my report with 2 or more values (depending of another field id).For example for id = 1 the report gives me 2 names in that field.For id = 3 the report gives me 3 names in that field.I want to display only one of these names in the id row.The selection of name is random.Thanks!

    Hello Tim,  would barely fit in this situation since this code resides on the client’s interaction side of things. I’d recommend using JavaScript for this matter, e.g. var Data_FName1 = document.getElementById(‘Data_FName1’).value;. If you still opt for using CFML, then you’d go for proxying your JavaScript code to a CFC.

  • Display only positive values for a particular Keyfigure

    Hi..
    (Sorry, I accidentally posted this also in Datawarehousing forum, actually it related to BeX forum).
    For a particular column(keyfigure) in my report, the user wants to display only positive values.
    I used the formula from the one of the forums
    (Keyfig > 0)* Keyfig.
    This displays only positive values in the column as required. But, the result for this column is also affected. As the result is negative, it shows, zero in the result for this column.
    Is there a way in which the result will not be affected by the formula?
    I went into the properties of the particular keyfigure and chose Calculate Result as -> Summation.
    It throws out the following error message
    'Calculating result as...' was not executed
    Message no. BRAIN141
    Diagnosis
    The function 'Calculate Results as ...' could not be used in all
    instances.
    The recalculation of a result cell always occurs based on the set of
    detailed cells subordinated to this cell. This is the most detailed
    level of the drilldown. Therefore it is not posible to recalculate in
    hierarchical lists. The calculation of a results cell is not performed
    if a cell or column with an expand symbol is assigned beneath it.
    Otherwise the newly calculated result is changed every time one of its
    lower-level nodes is expanded. This is not supported for technical
    reasons and would also only confuse users.
    Note, however, that calculating with "Suppress Results" is always
    executed because the restriction described above does not apply in this
    case.
    NOTE:
    The query shows the keyfigure values for a selected title, for profit center and territory hierarchies.
    Any suggestions would be greatly appreciated.
    Thanks,
    Sai.

    Hi Deepu,
    Thanks for the reply. I tried with ur formula.
    LEAF(keyfig) gives all values "zero" for that particular column including the result.
    NOT LEAF(keyfig) gives all values "one" for that particular column including the result.
    So, ur formula gives the same values as of the present column values.
    I tried condition, but it's not working...it says the following errors...
    There is a condit. on Title, results row suppress. active on Profit Center    
    (conditional                                                                               
    Message no. BRAIN144                                                                               
    Diagnosis                                                                               
    Characteristic Title has an output condition and the 'Suppress Results    
        Cells' property is active for Profit Center. This generally leads to an   
        incomprehensible output list.                                                                               
    System response                                                                               
    As soon as an output condition is defined for a characteristic (here      
        Title), the system calculates the corresponding result cells and applies  
        the output condition. If a result cell of this type is later deleted by   
        the condition, all the lower-level detail and result cells in its         
        drilldown are suppressed. Because the result cell is suppressed the       
        Title rows are then omitted from Profit Center.                                                                               
    In extreme cases this can lead to an entirely empty list being            
         displayed, although the single rows or columns would be displayed if the  
         condition were deactivated.                                                                               
    Procedure                                                                               
    Check the query settings, especially results row suppression and the      
         output conditions.                                                                               
    Procedure for System Administration                                                                               
    You can deactivate this message Brain 144 with transaction RSRT1.                                                                               
    There is a condit. on Profit Center, results row suppress. active on        
    Territory as in SPL (conditional                                                                               
    Message no. BRAIN144                                                                               
    Diagnosis                                                                               
    Characteristic Profit Center has an output condition and the 'Suppress  
        Results Cells' property is active for Territory as in SPL. This         
        generally leads to an incomprehensible output list.                                                                               
    System response                                                                               
    As soon as an output condition is defined for a characteristic (here    
        Profit Center), the system calculates the corresponding result cells and
        applies the output condition. If a result cell of this type is later    
        deleted by the condition, all the lower-level detail and result cells in
        its drilldown are suppressed. Because the result cell is suppressed the 
        Profit Center rows are then omitted from Territory as in SPL.                                                                               
    In extreme cases this can lead to an entirely empty list being            
         displayed, although the single rows or columns would be displayed if the  
         condition were deactivated.                                                                               
    Procedure                                                                               
    Check the query settings, especially results row suppression and the      
         output conditions.                                                                               
    Procedure for System Administration                                                                               
    You can deactivate this message Brain 144 with transaction RSRT1.
    Thank you very much.
    Regards,
    Sai.

  • How to display only Day value instead of DATE in Bex Report

    Hi Experts,
    We have a Month to date Report, in this report we need to display only day value instead of DATE value,
    Like
    if Date is 14.05.2010 we need to show only  14
    Regards,
    Chandra

    Hi ,
    Thanks for Quick Response
    we does have the option to create the char(calday or ...) value variable replacement with char (calday or ...) info object, we can  replace with Report r variable value only not with info object.
    i hope we can replace the with info object only with formula variable with replacement.
    My BEx Report is Designed like
    Columns
    0Calday
    Rows
    Plant
    Keyfigures
    Actual
    Plan
    Report output Looks like month to date
    0CALDAY            01.06.2010   02.06.2010  03.06.2010
    P1  ACTUAL            10                     8                    4
    P1  PLAN                 15                     6                    2
    P2  ACTUAL              5                   10                     7
    P2  PLAN                  4                      8                    3
    Report should be
    0CALDAY            1    2     3
    P1  ACTUAL      10     8      4
    P1  PLAN           15     6     2
    P2  ACTUAL        5    10    7
    P2  PLAN            4      8     3
    please let me know how can i achive this
    Regards
    Chandra

  • BPC 7.5 - How Filter only Negatives values ?

    Hi, i have Report and need supress all values <0
    I need show negative values only.
    Any idea ?

    Hi,
    if you want to suppress negative values you must write VBA code or you can just highlight the negative values (or hidden the positive using as color the bacjground) with conditional formatting.
    Kind regards
    Roberto

  • Background Job Still Running - Data Can Be Displayed Only Msg Populated in Maintain Versions (OKEQ) Screen

    Hi,
    I try to create 2013 FY in "Setting for Each FY" in OKEQ - Maintain Versions unfortunately I have created Null FY, try to delete Null FY on the time it will ask Job schedule, I have cancelled the job & reopen Maintain Versions (OKEQ) screen on the time system populated the msg "Background Job still running - Data can be displayed only"
    In Settings for Each FY screen there is no New Entries button, all FY are blocked status, changes was not allowed.
    How can I resolve it.
    Waiting for your valuable suggestions.
    Regards,
    Nageswar.

    Dear Rajneesh Saxena
    Thanks for your prompt reply.
    Yes you are correct, on the time of deletion it will ask Background Job Process, for immediate deletion must & should select "NO".
    While "Settings for Each FY" screen populates message "Background Job Still Running - Data Can Be Displayed Only" open  screen in display mode enter the command "=KILL" in command bar press enter, then you will allow to changes get New Entries button also.
    Problem is solved
    Regards,
    Nageswar.

  • Can we display only sub totals on the alv grid output

    hi,
    can we display only the subtotals calculated on the grid display.it should display all the data it shpuld display only the subtotals of it.
    if yes can any one please give me the code for
    will be awarded with points.

    Hi Raju
    You can do that
    When you are doing fieldcatalog,comment ws_fieldcat-do_sum = 'x'.
    if you comment that it wont display totals.
    use sort
    i_sort type slis_alv...
    clear ws_sort.
    ws_sort1-spos = '1'<position of field>
    ws_sort-fieldname  = 'matnr'.
    ws_sort-up = 'x'.
    append ws_sort to i_sort.
    pass this i_sort to FM

  • In query  display  sales negative values

    Hi Friends
    Iam Exicuting query based on these selection parameters
    Sales Org: 5360
    cal Month/Year: 04.2007 to 04.2008
    When am exucuting the query above parameters some values display negative values like
    04.2007 month display -39
    07.2007 month display -253
    the key-fig is sales turnover Qty display negative values
    in BW side cube also display negative values
    why display the negative values
    anybody help me

    Check the Source where data is coming if it is negative value. If source has positive value, in Cube also it should be positive.
    Whatever value you have in your infoprovider, it will display in query.

  • Number Ranges-The data is locked by user ... and can be displayed only

    I wanted ti define number ranges - Transaction CXEG in Consolidation, and somehow i blocked the data (message: The data is locked by user ... and can be displayed only). How i can unlock the data so i can define new number ranges for this year. Please help

    Hi,
    Make sure you don't have any open sessions. If not, then go to SM12, and delete the relevant locked entry.
    Regards,
    Eli

  • Can we display only the required dimensions under Dimensions Drop Down list

    Hi,
    I am using Hyperion Financial Data Quality Management, Fusion Edition 11.1.1.3.00, so far under Activities -> Maps option we used to display all the dimensions used in the application, but now as per the client's requirement we need to display only those dimensions which needs mapping under dimensions drop down list.
    Eg)
    Now in our Application our Dimension Drop Down list will look show these dimensions
    Account
    Entity
    Legal Entity
    Inter company
    Reverse 1
    Reverse 2
    Among these we are doing mapping only for Account, Entity dimensions so we need to hide rest of the dimensions from the Dimensions Drop Down list for which we are not using any mappings (Legal Entity, Inter company,Reverse 1,Reverse 2)
    Another thing is these dimensions should be hidden only from the drop down list and not from the Output file generated after the Export.
    Some suggestions regarding this issue will be greatly helpful.
    Thanks,
    Abdulla Javeed Hassan

    Hi
    If hiding the other dimensions is to prevent users from accessing and changing the mappings then you could do this by amending the object security so that only certain user roles can access the Activities > Maps option.
    This will only really work if you have limited users / central team that will control the maps but it is the most obvious way to stop users accessing the maps.
    Hope this helps
    Stuart

  • Can we display only the required columns dynamically?

    Hi All,
    I have a scenario where in I have 30 columns in the rtf template. All the columns will never be displayed, only a select few will be available for display. So the output file is show blank columns. Now I want to display only the columns which contain data.
    FYI- We cannot know which columns consist data until we run the report.
    Any Advice.
    Thanks in advance.
    Madhav.

    Hi,
    You can use the following:
    Column header:
    <?if@column:/node/child_node="PUBLIC"?>My label<?end if?>
    Column data:
    <?if:/node/child_node="PUBLIC"?>My data<?end if?>
    The @column will tell XMLP wheater or not the column shall be shown.
    I hope this helps you.
    BR Kenneth

  • Display only single value

    Greetings,
    Given my dimension <course section> and measure object <Billable Hours> etc.
    When a given course section meets multiple times and/or has a lab my report doubles the billable hours.  doubles e.g. instead of 4 billable hours, the report displays 8 billable hours.
    I tried the following formula  w/ ranking w/o any success.
    =If([Billable Hours] = Min ([Billable Hours]) In ([Section ID])) Then "1" Else "0"
    How can I get my report to display only 4 billable hours?
    TIA,

    Greetings,
    I tried the above formula suggested by Jothi, but when I drag my variable to my report, it displays 1 across the board..
    Anuj, in the attached screenshot BIOL-101 shows 8 billable hours, but in actuality it’s only 4 billable hours.  T
    he billable hours usually doubles and/or gives wrong result for the following reasons:
    When the course has multiple sections
    When the course has a lab
    My requirement is to display 4 billable hours for BIOL-101 in the sample.
    TIA

  • Can users display only own documents in Web CRM?

    Hello
    is it possible to have a limitation for users in diplaying documents (sales order, quotes, tickets, and so on) in web CRM?
    Each user can access to own documents with a super user able to display all.
    We are in the situation where sales reps do have to displays only own orders, while the Sales Manager can display all.
    Thanks
    Paolo

    As a default, users with the Sales Rep Role will only see their own assigned customers and assigned customer documents in the Sales View.  However, they could still search for customers assigned to other reps in any of the search fields. 
    If you wanted to go further than that you could create a custom role that keeps them from accessing pages or components that allow searching but I doubt you could disable them all without seriously affecting some pages and functions (like searching for a customer's name and contact when creating an activity).
    I suspect it would take some custom work to truly isolate every rep and his/her customers and documents from every other rep in every situation.

  • Display only first value of the repeated values  in ALV report

    Hi,
    Test Data
    Doc No   Net Val   billing Doc value Qty
    1000      2000.00    567850.00
    1000      2000.00    567850.00
    1000      2000.00    567850.00
    2000      6000.00    767850.00
    In this type of ALV Report in which only the First field value of the repeated value  should be displayed.
    Doc No   Net Val   billing Doc value Qty
    1000      2000.00    567850.00
    2000      6000.00    767850.00
    I can display document value as like expected result in SORT ORDER in LAYOUT but the Quantity value,Net value  which cannot be done in SORT ORDER in LAYOUT.
    Please tell me the suitable solution.

    For a Sales Order there are two Invoice.
    Sales doc     Invoice No    Billed Qty    Net value                     Qtywith  material no
    5000              900             234774.00    456.00000                 65             123
                                             234774.00    456.00000                 25             456
                                             234774.00    456.00000                 35             898
                                             234774.00    456.00000                 20             496
                          901            634774.00    256.00000                 50               746
                                            634774.00    256.00000                 10               456
                                            634774.00    256.00000                 20               545
                                            634774.00    256.00000                 30               869
    I  need to print this billed Qty and Net value  only once in first line and it should not be deleted.
    I need the result like this
    Sales doc     Invoice No    Billed Qty    Net value                     Qtywith          material no
    5000              900             234774.00    456.00000                 65                     123
                                                                                    25                     456
                                                                                    35                     898
                                                                                    20                     496
    5001              901            634774.00    256.00000                 50                       746
                                                                                    10                       456
                                                                                    20                       545
                                                                                    30                       869               
    The same value should not be repeated for Billed Qty and Net Value.
    I can do that for Sales doc in sort order in layout but i couldn't do for Billed qty and Net Value.
    Please  help.

Maybe you are looking for