Can I do looped playback on a single clip?
I'm trying to adjust audio settings, I can't get the clip to loop so I can adjust my audio changes as I listen, is this possible?
Thanks
Similar Messages
-
Hi. I'm just starting out on Garageband and can't seem to hear loops in the loop browser. Any suggestions would be much appreciated. Thanks.
The loop browser has it's own little volume control at the bottom right, make sure that is turned up. Does GarageBand make noise if you use the on screen keyboard?
-
Loop Playback enabled or disabled at a glance?
Can't find the way to understand at a glance if Loop Playback is enabled or disabled. Is it possible that FCPX lacks an option like this?
Yes. It's only visible in View>Playback. Use feedback to request it.
-
Real newbie question-I can hear the loops in my library, but when I drag them to a track, there is no audio when I playback or record. What am I doing wrong?
You probably put Midi loops (green) on audio tracks, and audio loops (blue) on Midi tracks.
That won´t play.
JanD -
How can i get all these values in single row with comma separated?
I have a table "abxx" with column "absg" Number(3)
which is having following rows
absg
1
3
56
232
43
436
23
677
545
367
xxxxxx No of rows
How can i get all these values in single row with comma separated?
Like
output_absg
1,3,56,232,43,436,23,677,545,367,..,..,...............
Can you send the query Plz!These all will do the same
create or replace type string_agg_type as object
2 (
3 total varchar2(4000),
4
5 static function
6 ODCIAggregateInitialize(sctx IN OUT string_agg_type )
7 return number,
8
9 member function
10 ODCIAggregateIterate(self IN OUT string_agg_type ,
11 value IN varchar2 )
12 return number,
13
14 member function
15 ODCIAggregateTerminate(self IN string_agg_type,
16 returnValue OUT varchar2,
17 flags IN number)
18 return number,
19
20 member function
21 ODCIAggregateMerge(self IN OUT string_agg_type,
22 ctx2 IN string_agg_type)
23 return number
24 );
25 /
create or replace type body string_agg_type
2 is
3
4 static function ODCIAggregateInitialize(sctx IN OUT string_agg_type)
5 return number
6 is
7 begin
8 sctx := string_agg_type( null );
9 return ODCIConst.Success;
10 end;
11
12 member function ODCIAggregateIterate(self IN OUT string_agg_type,
13 value IN varchar2 )
14 return number
15 is
16 begin
17 self.total := self.total || ',' || value;
18 return ODCIConst.Success;
19 end;
20
21 member function ODCIAggregateTerminate(self IN string_agg_type,
22 returnValue OUT varchar2,
23 flags IN number)
24 return number
25 is
26 begin
27 returnValue := ltrim(self.total,',');
28 return ODCIConst.Success;
29 end;
30
31 member function ODCIAggregateMerge(self IN OUT string_agg_type,
32 ctx2 IN string_agg_type)
33 return number
34 is
35 begin
36 self.total := self.total || ctx2.total;
37 return ODCIConst.Success;
38 end;
39
40
41 end;
42 /
Type body created.
[email protected]>
[email protected]> CREATE or replace
2 FUNCTION stragg(input varchar2 )
3 RETURN varchar2
4 PARALLEL_ENABLE AGGREGATE USING string_agg_type;
5 /
CREATE OR REPLACE FUNCTION get_employees (p_deptno in emp.deptno%TYPE)
RETURN VARCHAR2
IS
l_text VARCHAR2(32767) := NULL;
BEGIN
FOR cur_rec IN (SELECT ename FROM emp WHERE deptno = p_deptno) LOOP
l_text := l_text || ',' || cur_rec.ename;
END LOOP;
RETURN LTRIM(l_text, ',');
END;
SHOW ERRORS
The function can then be incorporated into a query as follows.
COLUMN employees FORMAT A50
SELECT deptno,
get_employees(deptno) AS employees
FROM emp
GROUP by deptno;
###########################################3
SELECT SUBSTR(STR,2) FROM
(SELECT SYS_CONNECT_BY_PATH(n,',')
STR ,LENGTH(SYS_CONNECT_BY_PATH(n,',')) LN
FROM
SELECT N,rownum rn from t )
CONNECT BY rn = PRIOR RN+1
ORDER BY LN desc )
WHERE ROWNUM=1
declare
str varchar2(32767);
begin
for i in (select sal from emp) loop
str:= str || i.sal ||',' ;
end loop;
dbms_output.put_line(str);
end;
COLUMN employees FORMAT A50
SELECT e.deptno,
get_employees(e.deptno) AS employees
FROM (SELECT DISTINCT deptno
FROM emp) e;
DEPTNO EMPLOYEES
10 CLARK,KING,MILLER
20 SMITH,JONES,SCOTT,ADAMS,FORD
30 ALLEN,WARD,MARTIN,BLAKE,TURNER,JAMES
CREATE OR REPLACE FUNCTION concatenate_list (p_cursor IN SYS_REFCURSOR)
RETURN VARCHAR2
IS
l_return VARCHAR2(32767);
l_temp VARCHAR2(32767);
BEGIN
LOOP
FETCH p_cursor
INTO l_temp;
EXIT WHEN p_cursor%NOTFOUND;
l_return := l_return || ',' || l_temp;
END LOOP;
RETURN LTRIM(l_return, ',');
END;
COLUMN employees FORMAT A50
SELECT e1.deptno,
concatenate_list(CURSOR(SELECT e2.ename FROM emp e2 WHERE e2.deptno = e1.deptno)) employees
FROM emp e1
GROUP BY e1.deptno;
DEPTNO EMPLOYEES
10 CLARK,KING,MILLER
20 SMITH,JONES,SCOTT,ADAMS,FORD
30 ALLEN,WARD,MARTIN,BLAKE,TURNER,JAMES
CREATE OR REPLACE TYPE t_string_agg AS OBJECT
g_string VARCHAR2(32767),
STATIC FUNCTION ODCIAggregateInitialize(sctx IN OUT t_string_agg)
RETURN NUMBER,
MEMBER FUNCTION ODCIAggregateIterate(self IN OUT t_string_agg,
value IN VARCHAR2 )
RETURN NUMBER,
MEMBER FUNCTION ODCIAggregateTerminate(self IN t_string_agg,
returnValue OUT VARCHAR2,
flags IN NUMBER)
RETURN NUMBER,
MEMBER FUNCTION ODCIAggregateMerge(self IN OUT t_string_agg,
ctx2 IN t_string_agg)
RETURN NUMBER
SHOW ERRORS
CREATE OR REPLACE TYPE BODY t_string_agg IS
STATIC FUNCTION ODCIAggregateInitialize(sctx IN OUT t_string_agg)
RETURN NUMBER IS
BEGIN
sctx := t_string_agg(NULL);
RETURN ODCIConst.Success;
END;
MEMBER FUNCTION ODCIAggregateIterate(self IN OUT t_string_agg,
value IN VARCHAR2 )
RETURN NUMBER IS
BEGIN
SELF.g_string := self.g_string || ',' || value;
RETURN ODCIConst.Success;
END;
MEMBER FUNCTION ODCIAggregateTerminate(self IN t_string_agg,
returnValue OUT VARCHAR2,
flags IN NUMBER)
RETURN NUMBER IS
BEGIN
returnValue := RTRIM(LTRIM(SELF.g_string, ','), ',');
RETURN ODCIConst.Success;
END;
MEMBER FUNCTION ODCIAggregateMerge(self IN OUT t_string_agg,
ctx2 IN t_string_agg)
RETURN NUMBER IS
BEGIN
SELF.g_string := SELF.g_string || ',' || ctx2.g_string;
RETURN ODCIConst.Success;
END;
END;
SHOW ERRORS
CREATE OR REPLACE FUNCTION string_agg (p_input VARCHAR2)
RETURN VARCHAR2
PARALLEL_ENABLE AGGREGATE USING t_string_agg;
/ -
How do you have AA CS 5.5 begin playback again at the beginning of the song when it reachs the end of the song? Or a selected portion of the song continually play when it reaches the end of the selected part? I've searched the menus and can't find it. I hope this hasn't been removed. Thanks.
That will work OK but there used to be a menu selection for selecting loop playback and I didn't have to worry about it. It did it automatically. In all versions dating back to 1.5 as I recall. Maybe that is missing from the latest version. Thanks for your reply.
-
Adobe Media Player Loop Playback
I'm playing back a .flv file created with the on2 vp6 codec
question: how can I get AMP to loop playback?
I looked in the playback tab under options but there is no option to set playback to loop.
AMP seems to be a very "consumerish" program- this is very disappointing
Hopefully I'm just not seeing this feature but it's there somewhere- anyone have an idea?
ThanksI don't think you can set the player to loop. This option is not included.
If you really need to, export you movie to .mov and play it in QuickTime with loop enabled. -
Auto set locators (loop playback)
Hi,
I have just moved from Protools to logic and am having problems enabling loop playback. In Protools I can check loop play mode and any region I have selected will automatically loop. However in Logic I seem to need to push the set locators button (or use the shortcut). Is there any way this can auto select when I choose a selection of the audio file? I have looked in the manual but can't find anything.
Thanks in advance,
Mike.Did you figure this one out? I'm dong the same thing - moving from ProTools to Logic, and I'm trying to figure out how to have Logic loop playback of a highlighted region. I'm baffled.
-
The WaveBurner manual says you can loop playback in Waveburner by dragging in the time ruler to create a cycle area (page 32 of the PDF manual). This used to work for me but no longer does. Dragging in the time ruler does zilch.
Anyone else having this problem, or know a solution. Looping playback was very helpful for working with plug-in settings. I'm not sure when this functionality was lost. Possibly with the installation of 1.6.1?Hi audiophile31,
Thanks for the solution! It's interesting to note that this only works in the TOP time ruler. The manual indicates it should work in either ruler (as I recall). And, you're right, the cursor does have to be close to the playhead.
Hopefully Apple will update the manual...or the program to be more intuitive. NOTE TO APPLE: It would be nice if there were an option (or default) to start the loop from the start position each time you hit the play button (rather than from where you left off in the loop). This was a feature requested in another string that I thought might be accommodated using the cycle loop (except I couldn't get it to work, hence my original posting). It would also be great to be able to set up two cycle areas and alternate between them by hitting option-play or some such command. I often import multiple mixes of a song and adjust plug-ins to compare the differences. Having two cycle areas I could alternate between would be really helpful in A/Bing the changes. -
How can I will declare the symbol u2018 (Single Quote) in the report
Hi ,
Could you please tell me how can I will declare the symbol u2018 (Single Quote) in the report.
My requirement is that I have concate the data with single quote and after that I have to store the data in to an internal table and I have to download the data in the form text file in the presentation server.
For example :
Let the below data I want to download into the presentation serve in the format of text file by storing in internal table.
Assume all are constants:
1st line : abcu2019add
2nd line : defu2019gef
Thanks in advance.Hi Jyothi,
Thanks for the quick reply .
I can agree with you are point but My requirement is like this I am explaining clearly.
I have declared the internal table like this.
DATA: BEGIN OF OTAB OCCURS 0,
LINE (9024),
END OF OTAB.
So I have to append the each line item into the internal table.
So I am explaining what the data I have to append
Ist line contains
'UNBUNOC:2020308u2019 where 020308 I will get the date from reguh table
2nd line contains:
'DTM+20020510' where the 20020510 will be reference document number from the table reguh.
So I want to declare a constant 'UNBUNOC:2
2nd the date from reguh table
And another constant u2018
So that I can concate all the three and I can put into string and I will append into internal table and I can download the data into the presentation server.
Please let me know if you need any more clarification regarding my requirement.
Thanks in advance. -
Can there be multiple ASM instances on single node?
Hi,
Can there be multiple ASM instances on single node?
This one says No : http://www.freelists.org/archives/oracle-l/02-2008/msg00317.html
And This one says Yes : http://www.databasejournal.com/features/oracle/article.php/3571371
Thanks in advance.
Thanks,
Harsha
Edited by: user498756 on Sep 11, 2008 2:23 AM...that document doesnt say you cannot have multiple ASM instances on a node. It says "...ASM, +you only need one ASM+ instance for that computer, to manage the two database instances that use ASM."
The fact that you only need one - and I cannot think of a good reason to have more than one - does not preclude the fact that you do seem to be able to have multiple ASM instances on a single node, each looking after its own set of disks and diskgroups.
Again - I cannot think of a good reason to do so though!
-Bob -
What's the trick? Can't delete loops from Garageband loop browser.
Am I missing something? I've tried to delete 3rd party loops directly from the Garageband loop browser, but could not. It wouldn't work in Garageband 08, and it won't work in '09.
These loops were all added to the library by drag and drop into the loops browser.
Is there something I need to do with file permissions?I think you can only delete loops from the browser that you created yourself with GB.
Just delete the loops in the Finder and re-index everything. -
When i try to upload a .mts file from my Sony camera to Premiere Pro CC it refuses to play the audio! Ofcourse i could convert every single clip but it takes tons of time. How can i make Pr play audio track properly?
Does it not play at all or cannot you get the audio in the timeline?
Did you copy the entire card to the hdd and then imported the file via the Media Browser?
Did you source patch the audio tracks? -
Can I add multiple elements on a single line?
Can I add multiple elements on a single line?
Not yet. But this is something we plan to support. You can vote on this idea here: http://forums.adobe.com/ideas/1046
We use this to help prioritize our work.
Randy -
Can you have multiple libraries on a single iPod?
Can you have multiple libraries on a single iPod?
Yes. This explains how >
Using iPad or iPod with Multiple Computers: http://support.apple.com/kb/HT1202
Note: You cannot load music from multiple computers or iTunes libraries onto iPod shuffle and iPhone like you can with other devices.
Maybe you are looking for
-
When I open a hotmail email on my iPad, it doesn't show as opened when I go on my mac.
I am a fairly new owner of an iPad air. Am stumbling on a few issues, one of which is that when I open a hotmail email on my iPad, when I next go to my mac the same email displays as unopened. It means I am having to duplicate actions with emails.
-
Cannot access prior time capsule backup
Hi, About 2 weeks ago I ran into a problem with my iPhoto library. I was trying to import photos from a camera and it took forever. After watching iPhoto being non-responsive for several hours I decided to force it to quit via the Activity Monitor.
-
Page will not display online but ok on local
what is wrong with this code? <%@LANGUAGE="VBSCRIPT" CODEPAGE="1252"%> <html> <head> <title>Look4</title> <link href="inc/main.css" rel="stylesheet" type="text/css"> </head> <body> <div class="logo"><!--#include virtual="/inc/header.asp" --></div> <b
-
Transport of class OK in SE24 & TADIR of destination, won't appear in SE80
Hello everybody! We have a NW 7.0 environment (CRM 5.0). I have this problem. I have created a transport request for a whole custom class (Z...) belonging to a custom package (Z...). I have released the transport and the SYSADM has successfully broug
-
Charged for services I cancelled in 2008
Hello I was thinking of returning to BT for phone and broadband but now I'm not! I cancelled my service with BT in Nov 2008 and moved all services apart from line rental to Sky. On Sunday I had our accounts checked and found that BT have been chargin