Can I force html project to download completely before starting

ver 7
I can't use captivate if it generates tutorials that stop every few seconds to download. I could live with a long wait before starting playback to download all files. Is this possible?

What you're talking about here is not necessarily Captivate's fault. It's more likely due to the design of your course content and the limitations of your target audience bandwidth.
So how have you designed your content?
How many megabytes is your module?
What is the effective end-user bandwidth of your target audience?
What output format are you using (HTM/SWF or HTML5)?
If you can answer these questions, we may be able to help you.

Similar Messages

I rented an HD movie in iTunes by mistake. Can I switch the rental to SD version before starting to watch it? Trying to make room on iPad.

I rented an HD movie in iTunes by mistake. Can I switch the rental to SD version before starting to watch it? Trying to make room on iPad for more rentals to take with me on trip.

You can get the SD or 720p version by:
Open iTunes 11
Click iTunes in menu bar > select Preferences...
Click on the Store tab
Change When downloading High Definition videos, prefer dropdown to 720p > click OK
Click on the iTunes Store button
Click Purchased link
Click Movies tab
You should now see a download icon for the movies you already have 1080p version of.
Click on this download icon to download the 720p version.
This will put a 720p version in the same folder on your hard drive as the 1080p version. If you have iTunes setup to play 1080p when available, it will play the 1080p version. When you connect your iPad 1, it will sync the 720p version.
Don't forget to change your preference back to 1080p so you can continue to get the higher quality version.

Make automator pause until previous action completes before starting next a

I'm trying to use Automator to loop through a series of presentations and movies we have, without any user intervention (it's for a project in a reception area of our company). I start with the slideshow and then would like to play the movie -- but I'd like this to happen after the slideshow is completed and not as soon as the slideshow starts. I could try to calculate the time the slideshow will need and place a pause there but this will complicating things (I'd like to be able to tell people to place movies to be displayed in this folder and slideshows in this folder without any reconfiguring of Automator being necessary)?
Is this possible?
Thanks in advance,
David

Solved it! For anyone else with similar issues, I used a quick timer to pause the stage for 1/10th of a second before moving on using the following code;
-- wait for a split second (so user can see blood splatter before next action executes!!)
    startTimer
    repeat while the timer < 0.1*60
      updateStage
    end repeat
Sorted

How prevent movie from loading completely before playing?

Hi,
how do I prevent an swf from loading completely before
starting to play in the browser? When simulating a download in the
Flash application, several preload stages work perfectly, but not
in the browser. Preload stages don't appear, instead it takes ages
for the 3.5 mb file to completely load before displaying the first
frame of the movie.
I have tried inversing the load order in export settings and
different flash versions, but just can't get it to work.
Can someone help? Thank you!

hi kglad
I thought it should be that way; the point is that I don't
want to add code that loads the entire movie before starting to
play the first frame, but only a certain number of frames (i.e. 11
out of 35, for example). I'm trying to do this with this code in
the first frame:
ifFrameLoaded (11) {
gotoAndPlay("start");
in the simulation, it works perfectly, but when uploading the
movie and viewing it in html, the entire thing loads, and the
preloader doesn't appear.
Many thanks for your help.

Can't create new projects in RoboHelp HTML 7

When I try to create a new projects in RoboHelp HTML 7, the
Projects Type field is blank on the New tab of hte New Project
dialog box. I just bought this product after using the trial
version for 30 days. I can open the projects I created before but
can't create new projects. Help! I need it now!

OK, this problem is solved -- the problem was RoboSource
Control 3.1. I realized that I had installed RoboSource Control 3.1
during my Trial install (the option to install it is checked by
default). By re-running the Trial download (thank God I saved it) I
was able to uninstall RoboSource Control 3.1. (I could not
uninstall it using the Tech Comm Suite installer or the Add/Remove
function in the Windows Control Panel)
Then I ran the Tech Comm Suite install and reinstalled
RoboHelp 7 (without installing RoboSource Control 3.1).
Now RoboHelp 7 HTML works again. Note that only the HTML
version was screwed up -- the Word version ran OK, I just don't
need it.
Finally, I just want to say, Adobe Tech Support *SUCKS*.
After spending a half hour on my initial call on Sept. 26th, "Ken"
directed me to the Adobe Support web page and told me to enter my
problem myself -- thanks for nothing, Ken. He promised a 24 hour
turn around, which did not happen.
When I called back on Sept. 29th, I wasted another hour with
Natasha and Sam, who had me run CSClean, which wiped out my
registry entries for Acrobat and Photoshop, forcing a reinstall of
those products. Of course, that did not help me at all.
Adobe, please stop outsourcing your Tech Support to India --
those guys know nothing!
The replies to this issue on the "Customer Support Portal"
have been slow, indifferent and unhelpful. Shame on them!
I'm posting this fix to this problem on this Forum, so the
next poor slob may be able to fix their problem themselves as I
did, 'cause Tech Support sure won't help!

How can I force Time Machine to make a complete backup of my Hard Drive. I just installed a new external drive for Backup since my previous one failed. Now when I back up, Time Machine only backs up my data folder and the Users folder.

How can I force Time Machine to make a complete backup of my Hard Drive. I just installed a new external drive for Backup since my previous one failed. Now when I back up, Time Machine only backs up my data folder and the Users folder.
When I start a backup. Time Machine says "Oldest Backup: None; Latest Backup: None", so it seems like it should do a complete backup, but it only does a partial.

Hi I'd like to jump in here. Your app showed me this:
Time Machine:
          Skip System Files: NO
          Mobile backups: OFF
          Auto backup: YES
          Volumes being backed up:
                    Macintosh HD: Disk size: 749.3 GB Disk used: 453.81 GB
          Destinations:
                    Plastic Wrapper [Local] (Last used)
                    Total size: 999.86 GB
                    Total number of backups: 64
                    Oldest backup: 2013-07-24 23:25:11 +0000
                    Last backup: 2013-11-17 01:40:47 +0000
                    Size of backup disk: Too small
                              Backup size 999.86 GB < (Disk used 453.81 GB X 3)
          Time Machine details may not be accurate.
          All volumes being backed up may not be listed.
          /sbin excluded from backup!
          /usr excluded from backup!
          /System excluded from backup!
          /bin excluded from backup!
          /private excluded from backup!
          /Library excluded from backup!
          /Applications excluded from backup!
Aside from the size of my backup drive, which I will increase at some point, I'd really like to have time machine backing up all system folders, especially Applications. How to I reset this hidden exclusions?
Thanks,
Darcy

Can I import HTMLs from inside the project and use as portlet page ?

As you know, I am using Java Studio Creator 2 Update 1 for my current portal project. I have created JSR-168 JSF Portlet Project for my portlet development.
As I have some html pages ready for my development,
Can I import HTMLs from inside the project and use as portlet page for my project?
I did the followings steps:
1: In side the project - File -> Add Existing Item -> Web Page ( imported test.html page from my local folder)
2: Let it convert some of the tags for me ( so now it becomes - �test.jsp� )
3: Set it to initial view.
4. A default portlet page � newPortletPage.jsp is still there with no initial view.
Now after doing this, No Visual Designer and Properties window available to for that �test.jsp� page. Though it allowed me to �build� the project successfully.
When I build and run the portlet application, got the error message �Error occurred in portlet!� on Pluto Portal. Please advice.

You do not open fcpproject files. You don't double click or anything else. The files have to be in the correct folder structure in the Final Cut Projects folder and the application opens them automatically. Can you post screen shots of the Final Cut Projects folder and its location.

The operation can't be completed because an unexped error occurred (error code-50). This appears when I'm copying a file to the drive and then I wasn't able to edit to my drive. Then this morning I can't open my project file. What to do?

Message: The operation can't be completed because an unexped error occurred (error code-50).
This appears when I'm copying a file to the drive and then I wasn't able to edit to my drive.
Then this morning I can't open my project file. I get this message: The project appears to be damaged, it cannot be opened.
What should I do!??
I have moved my project onto 2 different external hard-drives now.

Hi There,
After looking around for this error, it seems to be related to OS, we would recommend you to contact Apple support for this.
Thanks,
Atul Saini

Can I force the bootcamp wizard to skip looking for the bootcamp drivers? I have already downloaded the latest drivers and loaded them on a FAT usb drive. All I want is for bootcamp to create the partition and allow me to install windows 8 pro

Hi Everyone,
Can I force the bootcamp wizard to skip looking for the bootcamp drivers? I have already downloaded the latest drivers and loaded them on a FAT usb drive. All I want is for bootcamp to create the partition and allow me to install windows 8 pro.
The bootcamp drivers have been downloaded from apple's website. Filename: BootCamp5.0.5033
I have a iMac 27" late 2013 model.
NOTE: I have downloaded the drivers manually from apples support site as the bootcamp wizard fails third of the way through the download.
Appreciate any assistance.
Regards,
asdutoit

There is a missing point in this thread, and it is that the Boot Camp drivers for the Late 2013 iMac can only be downloaded from Boot Camp Assistant. The Boot Camp drivers available in the Apple site are not compatible with that iMac.
Delete the Boot Camp drivers from the USB drive, open Boot Camp Assistant and try to download the Boot Camp drivers again. If you get a message telling you that they could not be downloaded, I would try reinstalling OS X through OS X Recovery, by holding down Command and R keys while your Mac is starting up

TS1362 I purchased an album from itunes and a song in the middle of the album did not download completely. So, the song obviously cannot be transferred to my ipod because the file cannot be converted. What can i do?

I purchased an album from itunes, and a song in the middle did not download completely. All the others did. So, I obviously could not transfer that song to my ipod because the file could not be converted. What can I do?

If your country's iTunes Store allows you to redownload purchased tracks, I'd delete your current copy of the track and try redownloading a fresh one. See the following document for instructions:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
Otherwise, I'd report the problem to the iTunes Store.
Log in to the Store. Click on "Account" in your Quick Links. When you're in your Account information screen, go down to Purchase History and click "See all".
Find the item that is not playing properly. If you can't see "Report a Problem" next to the item, click the "Report a problem" button. Now click the "Report a Problem" link next to the item.

I downloaded the iOS7 and I can't force quit the open apps. I was told, "Force-quitting apps is a little different though: Instead of tapping and holding on the icon, you flick a thumbnail up to dismiss it." Comments please & thank you

I downloaded the iOS7 and I can't force quit the open apps. I was told, "Force-quitting apps is a little different though: Instead of tapping and holding on the icon, you flick a thumbnail up to dismiss it." Unfortunately, that didn't work. Any comments please & thank you

Sorry if I didn't make myself clear. Prior to loading 1OS7 it was easy to force quit applications that were still open by double clicking and seeing an a red "x" you had to click on.
It doesn't work that way with the new operating system and the instructions that were given "Force-quitting apps is a little different though: Instead of tapping and holding on the icon, you flick a thumbnail up to dismiss it."
Do not work.
I am looking for anyone who can help figure this out.

Can I apply one .css stylesheet to all of my linked word documents inside my RoboHelp8 HTML project?

Hello all,
I am on my fourthRoboHelp8 HTML project, after the other three crashed. I am a technical writer constructing my companies Policy and Procedures Guide. I am only 142 (word documents) and 9 (RoboHelp topics) into my project and there will be plenty more to come. I recently took Kevin Siegel's RoboHelp8 class where I determined that it would be best if I link all of my word documents inside of the Project Manager becuase I will be constantly updating these documents. I've searched around the Adobe Forums, talked to Kevin, and talked to my IT Department, but I cannot seem to find an answer for my problem.
I have linked all of 142 word documents inside of the Project Manager, and all 142 word documents have their own .css stylesheet. I have assigned the default.css stylesheet (which I have assigned all of the proper formatting to headings 1-4 to match headings 1-4 inside of my Microsoft Word 2007 documents) under Project Settings under the Import tab. I also assigned this default.css stylesheet under WebHelp Pro. My understanding with applying the default.css stylesheet to these two places is that all of my word documents and topics should have this stylesheet applied to them.
However, when I look at each individual linked word document the default stylesheet has not been assigned and the word document is still being dictated by its own stylesheet i.e. Credit.css. On my third project, before it crashed, I manually went through all 142 word documents in the Project Manager and assigned the default.css stylesheet to them. I did this by right clicking on the topic, under Appearance, I changed the stylesheet i.e. Credit.css to default.css and clicked apply. I was immediately prompted with the two options: "Preserve modifications to this file" or "Don't show me this message again." I tried both options. The first applied the default.css stylesheet and removed the Credit.css stylesheet, but when I made a change inside of my word document and updated it inside of the Project Manager none of my changes appeared. The second did not apply the default.css stylesheet and kept my Credit.css stylesheet applied to my word document. When I made a change inside of my word document and updated it inside of the Project Manager the change appeared.
I talked about this to Kevin and he said that the individual stylesheet applied to each linked word document did not mean anything, essentially that by making the default.css stylesheet the dominant stylesheet under Project Settings under Import that the stylesheet would be applied to all of my linked word documents/topics. He also suggested that I make a change to the stylesheet like change the color of Heading 1 and link a new word document to see if it applied the changes. I tried doing this inside of my third project, but nothing changed.
I would like to know if I can assign one stylesheet to all of my linked word documents before I get too far into the fourth project and have that project crash on me too. One of RoboHelp's appealing features is to apply one stylesheet to multiple topics, or in my case 142 word documents and 9 topics. I hope that I can apply one stylesheet to all of these linked word documents because having 142 individual stylesheets is unmanageable.
Any help or suggestions would be greatly appreciated.
Thank you,
Roxxanne

When a word document is imported into RoboHelp project, RoboHelp generates a separate stylesheet for each word document as each word document may have its own formatting styles. In a generic scenario, word documents may be brought from different sources and may have different styling. Hence, RoboHelp allows users to preserve different styling through sepearate stylesheets.
However, for a different scenario like yours, RoboHelp allows users to override all the CSS and apply a single CSS to all the topics at the generation of output. As you have already mentioned that you have applied default.css in the WebHelp Pro SSL dialog, that should suffice and should meet your requirement of applying a single CSS to all the topics. You can verify the same at your end by linking few word files and generating the output with a single CSS applied in the SSL settings.
Mayank

Can I download an iWeb site so that I can change the html? I need to add a better blog and also some SEO.

Can I download an iWeb site so that I can change the html? I need to add a better blog and also some SEO.

Where is your site hosted? If it's hosted on MobileMe you can use SEO to edit the site online. No need to get it locally.
If the site is hosted with a 3rd party fpt client then publish your site to a folder on your hard drive, use SEO on it there and then upload the site to your server with a 3rd party ftp client.
What do you mean "add a better blog"?
OT

I bought an album and one of the songs did not download completely. It shows that the song is 3:17 seconds but only got 40 secs. of it. How can i get the rest of the song back?

I bought an album from itunes and one of the songs did not download completely. It shows in the player that it is 3:17 but only plays for 40 secs. How can i get the entire song back?

I'd report the problem to the iTunes Store.
Log in to the Store. Click on "Account" in your Quick Links. When you're in your Account information screen, go down to Purchase History and click "See all".
Find the item that is not playing properly. If you can't see "Report a Problem" next to the entry, click the "Report a problem" button. Now click the "Report a Problem" link next to the item.
(Not entirely sure what happens after you click that link, but fingers crossed it should be relatively straightforward.)

Hi i got a few free app before and did not download them completely and dont want to do this but they stay in my download list and start automatly when i connect to itunes store and going to crazy me how can i remove them from my account for ever please h

hi
i got a few free app before and did not download them completely and dont want to do this
but they stay in my download list and start automatly when i connect to itunes store and going to crazy me
how can i remove them from my account for ever
please help me
thank you

Try Here > https://discussions.apple.com/thread/4074945?tstart=0

Can I force html project to download completely before starting

Similar Messages

Maybe you are looking for