Can I get some help for a really weird problem? Song always skips to beginning.

I have a song on my iPod that always plays the beginning part of the song, no matter where I am in the song. If the song is 3 minutes long and I go to 1:50 on the time meter it will still play the beginning part of the song, even though the time meter says it's at 1:50. I've tried playing the song the whole way through without skipping but it still hasn't fixed the problem. The song works fine in iTunes, it's just affected when I play it on my iPod.

I'm fairly certain this is a Lion issue, but I'll post in the MacBook forum as well.
here's that post:
https://discussions.apple.com/message/17766275#17766275
In that one I suggested updating to OS X 10.7.3. It fixes a lot of problems, admittedly none of yours specifically.
I understand your frustration but you should decide upon one thread or another. Since this one has more interest I suggest you stick with this one. Tracking two of them will only add to your headaches.

Similar Messages

  • HT1414 when I do this steps thy give me a massege says " the iphone could not be restored . An unknown error accorred (3149) " . Can I get some help ?

    when I do this steps thy give me a massege says " the iphone could not be restored . An unknown error accorred (3149) " . Can I get some help ?

    Try using DFU/Recovery mode to restore
    1. Plug iPhone 4 to computer
    2. open iTunes
    3. Turn off iPhone
    4. Press home and power button for 10 seconds
    5. Stop pressing the power. Button but keep pressing down the home button
    iTunes should say the following; "iTunes won't be able to use your iPhone until you restore your device"
    Then you'll have the option to restore and it should work, it has worked for me in the past

  • How can I get some help!!!!!

    How can I get some help!!!

    Since you waited so long at your other thread for an answer, check there.
    https://discussions.apple.com/message/25113630#25113630

  • How can i get some help to cancel my single app month to month and/or upgrade to full creative cloud membership? please don't tell me to follow the guidelines because i've tried several times but the options to 'switch plan' or cancel plan' are not availa

    how can i get some help to cancel my single app month to month and/or upgrade to full creative cloud membership? please don't tell me to follow the guidelines because i've tried several times but the options to 'switch plan' or cancel plan' are not available on my screen

    Keensy I have requested a member of our support team contact you directly via telephone.  Once I was able to review the correct account it appears our support team has tried multiple times to contact you.  I would recommend checking your SPAM filtering in case you need to receive additional messages from our support team.
    I did request that you be contacted via telephone. I am sorry for all of the difficulties which you have faced.
    For future viewers of this discussion when contacting our support team at Contact Customer Care it is imperative that you be logged in under the account tied to your membership/subscription.  While there is cancelation options available you will have an increased chance of being offered an opportunity to contact our support team if your account entitlement can be verified.  For this to be done you will need to be signed into the same account as your membership/subscription/registered software title.

  • My HT BDV-N790W shows "needs network update" also my netflix doesnt load. can i get some help

    My HT BDV-N790W shows "needs network update" also my netflix doesnt load. Can i get some help, please.

    There's a lot there, so I'll start with the parts I can answer quickly.
    The "ACL found but not expected..." messages can be safely ignored, so says this article
    http://docs.info.apple.com/article.html?artnum=306925
    (look below all the "SUID" examples)
    I had changed my Desktop image earlier but when the "Installing 1 item" window came up it changed back to the back ground that you first see on your desktop after installation.
    Leopard installs updates a bit differently. If it's simply an application that does not change system files, it installs them like before, without having to restart. If the update is to the system, then you must immediately "restart," It then goes to that stars and purple screen to perform the installation. Before, it would do the installation while you still had control of the Mac and would prompt you to restart when it finished the installation. This change probably make things more secure and reliable, because you aren't allowed to do other things on the Mac while system updates are being installed.
    Please post back with the remaining point of concern.

  • Left side touch note working - took back up with PC companions - repaired with SUS - restore of contacts etc failed - restore error - touch still not working ..... Experts can i get some help ?

    Hi Guys / Experts / Arnab,
    The left side touch of my phone screen was not working. Was not able to type numbers 1, 2 and alphabets Q, W etc.
    I repaired with SUS after taking back up with PC companion.
    While restoring the backup, i got RESTORE ERROR, and almost everything got restore except few apps and CONTACTS, which is the most important thing in a mobile .
    ---> TOUCH IS STILL NOT WORKING <----
    Guys can i expect some help here ?
    Regards,
    Sush
    Solved!
    Go to Solution.

    I see
    this might help
    http://talk.sonymobile.com/message/448070#448070
    https://github.com/nelenkov/android-backup-extractor
    SO HERE IS HOW YOU CAN RESTORE YOUR DATA:
    Get your Fullbackupdata-Contactfile.
    1.  First go to your backupfile: (C:\Users\YourUserName\Documents\Sony\Sony PC Companion\SomeNameDependsOnLanguage\
    2. Make a Copy of your backup-File (crtl+c, crtl+v)
    3. We want to change the file extension, so make sure you see it. If you don't see a .dbk at the end of your file, go in the explorer window in the left upper corner on organise -> Folder and search options. Change to view and then deselect "Hide extensions for known File types"
    4. Rename (F2) the file to backup.zip
    5. Open the zip with 7zip or something similar.
    6. Navigate to Applications\com.sonyericsson.android.contactsimport and get the fullbackupdata file which is lying in this folder.
    7. Put this file on your Desktop.
    8.Download this jar-File: http://ge.tt/64TJmne/v/0?c
    9. Put the .jarFile also on your desktop.
    10. Doubleclick the .jar-File. After a few seconds a new file with the name "restore.tar" should show up (If not check if your fullbackupdata-File really has the name "fullbackupdata" and is on the desktop)
    11. Open the .tarfile with 7Zip
    12. Navigate to restore.tar\apps\com.sonyericsson.android.contactsimport\f\
    13. Copy full_backup_vcard.vcf to the Desktop.
    If everything worked you're finished, you can open this .vcf File via Windows-contacts -> import or put it directly on your phone and import it there (open Contacts. Settingsbutton -> impot)
    If you don't trust my .jar file, you can also download the github-project follow their orders and compile it yourself.
    Don't forget to mark the Correct Answers & Helpful Answers
    "I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994)

  • How can i get live help for premiere elements 11

    how can i get live help with premiere elements 11

    Click I STILL NEED HELP at this next link for Premiere Elements chat
    -http://helpx.adobe.com/contact.html?product=premiere-elements&topic=activating-my-product- or-serial-number-issues

  • I did all the following step to enable the dictation on my ipad3 but the icon is not showing on my keyboard. can I get some help

    I did all the following step to enable the dictation on my ipad3 but the icon is not showing on my keyboard. can I get some help

    Dictation is not available on the iPad 2 (your profile says iPad 2)

  • Where can I get some feet for my 15" Macbook Pro (mid 2009) without the cost of A$200

    I am loosing my mind. Can anuone please help?
    I have a 15" mid 2009 Macbook Pro, that I love. It is my 6th Apple computer so it's not like I haven't contributed to the Apple estate.
    I use it for work and study so it pretty much runns continuously and has since its purchase in 2009. So, as you can imagine wear and tear are starting to show.
    3 of the 4 feet have come off and this is making me crazy. It does not ventilate properly and doesn't sit well on the desk. I have attempted to buy all manner of feet to fit it, but nothing works.
    So, I took it to my local Apple store a while ago in search of some replacement feet for it. Because, Apple have to inspect all repair jobs.
    I cannot buy, the feet alone, I must buy the complete bottom housing for it at the cost of A$199.00 (WHAT!!!, I HEAR YOU SAY!!!, and that is pretty much exactly what I said when I was told this by my apple genius (and yes, I did say Genius with a sarcastic tone), but certainly the thoughts that ran through my mind were far stronger).
    So, in my eternal search to make my perfectly working but incredibly annoying, beloved macbook pro be as good as ever, I have been to 2 "apple" dealers in the hope to buy this product at a cheaper price. Because, 1. I don't want the base, only the feet and 2. I don't want to pay 200 bucks for it.
    Anyway. the first purchase I made was through some dodgy chinese website. Apparently, there is no one at the other end, because all corespondense was ignored. But I did get my money back.
    But the second has really done my head in. www.applecomponents.com had advertised the part at $US69. So, I purchased and paid with paypal and all was well with the world. But, This morning I recieved the following email. And this is the entirity of the message from a business with obviously no customer service skill, not address, no phone number. Just a rude individual at the end of the email.
    Remember, this was the whole email...
    "so it's looking like this part was in the wrong bin. we don't actually have one. we can get new, but it would cost around $150.
    please advise?"
    ***? (and I am really holding back bolding that text and setting the font size to 68).
    In Australia, if a product is advertised at a price, that is what we pay for it.
    So, I re-check the website and the price has increase $100 but, it still says "in stock".
    Right about now, I am starting to get quite frustrated, with this faceless nameless person/company/shonk.
    I get in touch with some consumer experts and reply and I recieve the following reponse...
    "it was an honest mistake. we have a lot parts. we haven't sold one of these bottom cases for over 6 months. whoever labeled em' did it wrong. I don't have the part, but I have access to ordering it new with my vendor - hence the price change.
    feel free to call me anytime and we can talk it out.
    thanks
    phillip
    503-806-6423"
    (not really sure where this phone number resides so the 10 digits are useless)
    Now, Phillip is not the person I made the payment to. The payment was made to Alex Kraft.
    Who, After I demanded the product. Has just refunded my money and dissapeard off the planet.
    I am sick and tired of these shonks and it is now my mission to stop these people from trading.
    Sorry for my digression but, I feel, all should be aware of these people. Scammers.
    But, if anyone knows where I can get some feet from someone who will bloddy supply them at a price that is reasonable.
    Please let me know.
    Thanks

    your situation is not new.  Others have been told by Apple that they have to purchase the entire bottom panel in order to replace the feet.  There are engineering solutions that can solve this problem, but to pay nearly $200 to replace a part that costs less than $1 (I am being very, very conservative) to manufacture is too excessive.
    I have had the feet come off as well.  Fortunately for me, I have not lost them and have been able to replace them.  Why they cannot sell them individually is a puzzle to me.  Perhaps some bean counter at Apple feels its too much effort to have these items individually  in their inventory.  I have had nothing but good comments to say about Apple, but sadly this is an exception.
    To address your problem, I have seen second hand ones advertised on Ebay.  The price was a bit steep, $10 as I remember.  Other wise, wjosten's suggestion is the only alternative.
    Ciao

  • Can I get some help?

    I'm doing some research for a project and I'm running up against a wall.
    I need to track the position of a LinkElement and draw an image next to it. So far I've been able to find the y position of a link and draw an image next to it. But it's super buggy. First, you have to add about 7 or 8 links before the tracking will work correctly and then the tracking isn't very smooth.
    Can anyone take a look at what I have and offer some suggestions?
    I'm using TLF 447 and SDK 4.0.0.8031
    If the file doesn't upload or takes too long it can be downloaded from here as well.
    Thanks.

    Hmmm did you try it a second time? Perhaps hold the power button down for 15 seconds.
    Did you try restarting with just the power cord and no battery?
    Hope you get the problem resolved.
    Greg
    PS It helps when your topic is more descriptive

  • Can I get some help from a live person?

    thelman81312280 I have followed the instructions for installing flash player 15 times and it is still not installed. How can I get a live person to help me

    Hi Thelma,
    The user forums are a peer-to-peer forum mainly used by users to help each other, while staff does participate, it is not our primary duty.  As such, you can't possibly expect a response within 2 minutes of posting in the forums.  In addition, Flash Player is a free product and Adobe does not provide support via any other channel.
    With that said, you've provided no information for anyone to assist you. Please Read Before Posting: How To Get A Useful Answer To Your Question.  Once you provide detailed information on your issue, we'll try to assit
    Maria

  • I just bought and installed mountain lion, and I can't get to sign in to hotmail.Can I get some help please. Thanks.

    I just bought and installed mountain lion, and I can't get to sign in to hotmail after several trials. I need help please. Thanks.

    so its in a forum, which I didn't stumble upon because it wasn't anywhere in the adobe troubleshooting steps for Windows 8 that automatically came up for me when I clicked that I couldn't see the test flash movie on their site. I guess if I spent another half a day googling I might have found it.
    BTW, unchecking Active X filtering in IE10, was NOT the fix. I had to go into the security tab, and change the custom active X setting I listed above. So this link you provided which mentions unchecking Active X filtering was not the fix that worked in my scenario.

  • HT204408 My applications folder has a black question mark on it at the bottom of my screen. I do not know what error I made, but my fan effect of the previous applications has gone away. Can I get some help with this?

    One day ago I inadvertantly removed my applications folder. In it's place is a folder with a black question mark which appeared after I attempted to open up the applications file. Also, previously when I clicked on the file applications would open in a fan display. Could I please get some assistance with this?

    ...removed my applications folder.
    From where? And to where?
    If you trashed it and emptied the trash, what backup, if any, do you have? If it's still in the Trash, move it back.
    If no backup, reinstall Snow, which will give you the version as of the DVD you use, then update back to 10.6.8, and run all other needed updates, including any security updates. This should save all your third party programs, as well as settings.
    The white puff of smoke is nothing, it only means you moved it out of the Dock. If you still have it, or had it, as soon as you open it it would reappear in the Dock. The item in the Dock is only a kind of alias.

  • How can I get some help with Verizon's customer service?

    I want to preface this by stating that this is the first time in the 10 years in which I've been a Verizon wireless customer, that I've had a problem that cannot be resolved to my satisfaction.  My issue started with a Verizon Wireless Stores in Bethlehem, PA.  I asked one of the sales clerks for some assistance (which I now regret).  My question to her was that I simply wanted to be able to connect my home laptop computer to the internet data on my mobile plan. Without even discussing the different options, I was "told" I needed to purchase a Mobile Hotspot Device (for $69.99, but just $20 after rebate!).  I told the clerk I didn't want to have to pay an additional bill every month and didn't want something that wasn't absolutely necessary.  She neglected to give me the more costly details, like the fact that it would require a 2 year contract on the device, and it would also cost me an additional $20 per month.  She knew I wasn't really sure what the most cost-effective option was, so I trusted her knowledge.  I even had my husband speak to her over the phone about the device, since he's more savvy about technology than I am.  The clerk spoke with him the entire time she completed my transaction, and when she rang the sale up, she did not have me sign anything.  She handed me the receipts, and told me I had 14 days to decide If I wanted to keep the device.  When I got home and tried to use it, it would not connect to my computer.  I took it to a local Verizon store on my lunch break one day and they looked into the transaction.  They told me it was never put on my account; it was charged to someone else's account in error.  I had to go back to the store where I originally purchased it.  I wasn't able to get back to the original store right away, but I made sure to get there by the 14th day.  It took two store managers to look at my account and figure out the error.  They fixed it, but no one apologized to me for the inconvenience; they simply told me they could activate the device for me, or if I didn't want it any more, they would take it back (minus the $35 restocking fee). I took issue with the restock fee, because the store made the error by not giving me the full information at time of purchase, and then not charging it to my account so that I could try it out for 14 days.  I was very upset that the manager refused to remove the restocking fee due to "policy" and that I "signed a contract" and I had to pay it.  I argued that she should make an exception in this case, because I was inconvenienced.  I told her if she valued my future business at her store, she would reconsider.  She refused to budge and told me that I didn't need to shop in her store any more.  I thought that was quite rude and insulting. So, I took all of my original receipts, along with the receipt that indicated that she refunded the $69.99 plus tax (minus the $35 restock fee).  I left the store quite upset, but figured there wasn't much else I could say to her. Meanwhile, it's days later and my bill still shows the entire amount of $74 for the mobile hot spot device still on there.  There is no credit for the return at all.  I called customer service on my lunch break yesterday, and was on the phone for 45 min with a "Kendra R" to no avail.  The entire call, she kept putting me on hold, and my bill was still not straightened out. When I asked to speak with a supervisor or manager, she said there was no one else available.  Later that afternoon, I got an automated call (that left a voice message) from Verizon Customer Service to do a survey on my customer service experience.  I did the survey and explained that my problem was not resolved and I would like a call back.  No one has called me back yet, and I am stuck with no resolution to my problem.  Now the Verizon store has the device back, and I still have the entire amount for it on my bill.  Can you help me please?

    Nope, it was a Verizon Wireless Store.  I went in there in the first place because I trusted the Company for their professionalism, but I've been let down badly.  I posted my story on here because I'm hoping to be able to get the attention of someone from Customer Service.  It seems like the only way you can actually speak with a live person who knows what they are doing, is when you stop paying your bill on time.  After you pay your bill, they transfer you to a poorly trained "rep" that has no authority to handle anything important. I'm actually a pretty patient person, but when it takes someone over 45 min mostly just to keep me on hold, and then tell me they can't help me, I'm not really impressed with their idea of customer service.

  • Can I get some help with my assets

    Hi Everyone.
    I've got a menu that I created and I made it an asset.
    <a href="../pages/index2.html">Home</a> | <a href="../pages/Men.html">Men</a> | <a href="../pages/women.html">Women</a> | <a href="../pages/bio.html">Who is Eric Jay? </a>| <a href="../pages/contactUs.html">Contact Us</a></font>
    Here is a link to it in order see it in action.
    http://www.designsbyericjay.com/pages/WomenDesign5.html
    You can see the link towards the top of the page all the words are jumbled.
    I cannot figure out why this is.
    Does anyone have any suggestions?
    Thanks!
    -Drew

    Thanks Nancy.
    I've been reading up and really studying your links.  I've came to a roadblock that I'm hoping you can help me with.
    #1.  The adobe dreamweaver forum isn't working for me right now.  So I hope this email makes it through to you as I am stuck.
    #2.  I have read up on positioning, floating and clearing but I must be doing something wrong.
    Here is the current page
    http://www.designsbyericjay.com/pages/index3.html
    My questions/statements are these.
    Someone said to not position things using any absolute divs.  However, i cannot get around this.
    I have started over from scratch. I first created a container div and set its position to relative with auto margins on the left and right of it.  I want to put everything in my website inside that container div.  I set a background image on it that I want to use.
    The way I understand things is that if I place a 2nd div into the container div- the 2nd it will reside inside the container.  If I add margin's to the 2nd div but leave positioning alone the div will move around inside the container relative to the container.
    If I set the 2nd div to absolute I can position it anywhere relative to the size of the upper left corner of the browser window.  
    The problem is- if I leave the 2nd div position empty (or set it to relative) and then use margins to move it around- it does not move relative to the container.  It actually takes the entire container and moves it and leaves a huge white gap at the top.
    Please see link
    http://www.designsbyericjay.com/pages/index4.html
    Also,
    I have a "central" graphic area where I want to have descriptions of a tshirt and a picture as well.
    I created a new div (inside of the container div) and labeled it something like mainGraphic.  Inside of that I put a 2nd div labeled something like tShirt description and an image.  I set the tShirtDescription div to float left and the image to float left as well so they will butt against each other.  I used no positioning.  But set a width limit on the tShirtDescription.  My thoughts on this are that the tShirtDescription div can grow/expand as needed and always reside on the left hand side of the mainGraphic div.  The graphic will float next to it.
    This worked great until I applied some padding to the tShirtDescritption div.  After I went over 3px of padding the image dropped below the tShirtDescription div. (as you can see in the above link)
    I am confused but feel like I'm really close to understanding all this.  I'm obviously missing something at the root level.  If you could give any suggestions I would appreciate it.
    Thanks
    Drew

Maybe you are looking for

  • Output 24pn video for television?

    Here is the situation. I'm working on a video which I shot 720p 24pn on my HVX200. I need to output the video onto tape to play on local TV channels (so I'm assuming i need to make the tape NTSC 29.97 interlaced, 720x480) I'm using fcp 5.1.4. My sequ

  • How to center or format embedded youtube video in Dreamweaver CS4?

    I'm pretty new at using Dreamweaver, but I created a website that I would like to embed a youtube video in. I've got the embedding part down-- copying code-- but it doesn't format. I have a couple of APDivs at the top of the page, and I'd like the vi

  • Sharing files wirelessly with N80

    For some reason I can set up the phone to find the WLAN and can happily browse the net on the handset. But for some reason, selecting "View on home net." or something similar with a media file doesn't do much - it just goes to "searching for devices"

  • Oracle Balance Sheet Planning Initialization

    Hello all, I am trying to install Oracle Balance Sheet Planning over Oracle EPM Planning 11.1.2.3 running on a CentOS 6 64bits server. I am using the official guide, Oracle Financial Services Balance Sheet Planning Product Configuration Guide 6.1, an

  • Information kept in client browser cache

    Hi all, Does anyone know what kind of information is stored in client browser cache when users are logged into Planning or Workspace? We have a concern from customer Information Security department concerning to confidential information (data) that c