Can I get the Mac address in Audit logs of Active directory server for the user's machine which connect to the network/Domain

Hello All,
I am trying to get the information of all the user's who connect to our Domain network by signing in using the domain account. For this I am using the Windows audit group policies ( I am not sure of there is any other way). I can see when the user tries
to login to the network there is a audit event created on the AD/DC server. I can see the Kerberos authentication and logon/logoff events in the audit events under event viewer.
However the info which is being populated in these events include :- Hostname, IP address, Username and so on... But I can't see the MAC address of the user machine/system. Is there any way I can
get the Mac address of the endpoint system as its one of the important criteria for our project.
Any inputs on this would be appreciated, incase if there is any other way other than group policies please suggest.
Thanks,
Kavish

> include :- Hostname, IP address, Username and so on... But I can't see
> the MAC address of the user machine/system. Is there any way I can get
> the Mac address of the endpoint system as its one of the important
> criteria for our project.
If you use DHCP, you can query the DHCP server. There's no builtin
method to get the MAC address directly.
Martin
Mal ein
GUTES Buch über GPOs lesen?
NO THEY ARE NOT EVIL, if you know what you are doing:
Good or bad GPOs?
And if IT bothers me - coke bottle design refreshment :))

Similar Messages

How can i get local MAC address?

How can i get local MAC address or desk ID?
thanks a lot;

How can i get local MAC addressUse the command line command ipconfig or ipconf (depending on o.s.)
or desk ID?Look at the desk and see if it has a number on it.
(Untested as my desk doesn't have an id)
thanks a lot;Your welcome.

Pre-populate adapter for setting the Active Directory OU for a user

Hi All
I created a pre-populate adapter that set the Active Directory OU for a user...
In the end the status of the resource is still showing "provisioning"..
It must be "Provsioned"..did I miss something ?
The logs speak as below :-
08:01:12,678 INFO [STDOUT] Running Create User
08:01:12,678 INFO [STDOUT] Before appending Root Context:OU=Human Resources,
08:01:12,678 INFO [STDOUT] tcUtilLDAPController.java : hierString : OU=Human Resources,dc=mydomain,dc=com
08:01:13,553 ERROR [ACTIVEDIRECTORYCONTROLLER] Problem creating object: javax.naming.OperationNotSupportedException: [LD
AP: error code 53 - 0000001F: SvcErr: DSID-031A0FC0, problem 5003 (WILL_NOT_PERFORM), data 0
]; remaining name 'cn=ASYMONDS'
08:03:18,756 INFO [[xlWebApp]] action: LogonAction: User 'XELSYSADM' logged on in session 8116CBC0FA1481D06A207A1941B9
E096
08:22:31,256 ERROR [WEBAPP] Class/Method: ProvisionedResourcesForUserAction/confirmEnableSelection encounter some proble
ms: No checkbox was checked.

Just verify the OU value is correctly populated , first try doing the provisioning by manually giving OU and everything .
Is it successful ?
Then we can check if something wrong going with pre pop.
Thanks
Suren

How can i get the network my iphone4 is locked to?

how can i find the network my phone 4s is locked to..?

Surely you must know who your carrier is? Who bills you?

I can not get my ipod 4 gen to log into Free Wifi hotspots. It shows that it is connected but I have to internet activity. I was at several hotspot locations last night and could not get on any, but other people were. HELP.

I can not get my Ipod 4 Gen to log into free WIFI hot spots. It shows that I am connected but I have no internet activity. I was in several hot spots last night and could not log in, other people were, but I could not. HELP!

- Did the other users who successfully connected have iDevices?
- Frequently you have to open Safari/a browser and agree to the terms and conditions of the wifi spot before yo can get to the internet. Some wifi spots use Flash or Java to log on which the iPod (and other iDevices) do not support)
- Have you tried resetting network settings: Settings:General>Reset>Reset Network Settings
- Does you Ipod successfully connect at home?.

Stolen black mac book how can i get my mac address

had my black 13 inch mac book stolen while visiting inlaws. we know who took it but need proof. filed a police report and gave serial number but need some way or tracking the computer..dont know what if any tracking capabilities the system had on it. and how can I find the Mac address for the laptop...any help would be great ....thanks
Derek..
<Edited By Host>

Yea the serial number will help if it ever gets pawned or found..but thats if she pawns it...what I need I someway of seeing the computer pop up in her town as she the main suspect and the only one who lives in that town..I do have the original box (never throw anything away drives my wife nuts) what does the number look like? and where would it be located on the box..??thanks for the help so far....

How can I get a Mac to run a LabVIEW VI that was created for Windows? (it calls DLL files)

This is for a spectrometer. A motor controller is connected by serial and a lock-in amplifier is connected through GPIB. I have a Windows version of the VIs I need to get it all running, but I need to get it running on a Mac. The program was written in LabVIEW 6.0.1 and I have both version of 6.1. Is there a type of file that Mac uses that are similar to DLLs? Is this even possible? Any advice is greatly appreciated.

> Thanks for your help. The supplier of the VIs hasn't made a Mac
> version. Is there a way I can find what the information is that is
> being passed? and use a static library to pass the information to the
> Mac? I'm very interested in hearing the 'not necessarily easy' answer
> if you would share it. ([email protected])
>
You can open the VIs on a PC or Mac and double click on the DLL node.
It will show you the parameter info, the function name, path to the DLL,
etc.
If you have the source code to the DLL, then make it on the mac using
the Metrowerks CodeWarrior compiler. If you don't have the source, then
you need to either shift to using diagram nodes exclusively or come up
with some other way of replacing the DLL.
For the details on compiling a DLL, you should look at your manual that
came with CodeWarrior and look at the CIN Manual or search online for
something ...
Greg McKaskle

Where is the "Prevent Active Directory synchronization for this user" stored in the Project 2010 DB tables?

I would like to create a report from the DB that gives me all users in Project/PWA 2010 where the "Prevent AD sync..." box has been checked in the user/resource configuration, but I cannot find where this is in the Project databases. Our
DB is SQL 2008 R2.
Thanks,
Marty Hadden
MS Project Administrator

Hi Marty,
I might be wrong but the Prevent AD Sync details are not available in the Reporting db. Maybe you can check the published/draft databases (not supported) or you can configure a separate custom field and you can duplicate the information for each user
into this field. The custom field can be used in the reports based on the reporting database.
Hope this helps
Paul

Get Hardware (Mac) Address through Applescript

Hi All,
How can I get Hardware (Mac) Address using applescript. Please tell me how can I do it. I have searched in the dictionary but I found nothing there.
Why I need it, I have developed some tool for InDesign & Quark User. I want to add the mentioned module in my application, so that as user will run the tool it will first validate the Hardware address, and if it match then application will run otherwise it will show a piracy message.
Thanks
Rajeev

>get if addr en0 failed, (os/kern) failure
Then you don't have an active interface. You can't use ipconfig to query an interface that isn't up.
You need to decide how you want to deal with this - you won't know in advance what interfaces the user may have active. For this reason, relying on the MAC address is inherently problematic. You might be better off using the system's serial number (which is less likely to change anyway):
<pre class=command>set serialNum to do shell script "system_profiler SPHardwareDataType| awk -F: '/Serial/ {print $2}'"</pre>

I can't get the connect to work after base installion.

Hello, everyone, I am new to Arch Linux.
I follow the installation guide install Arch Linux, Everything run pretty smooth, except at the part when I need to choose the package, I am not so sure what I am doing. So I choose everything except for the thing that I am sure I would never need.
When the installation is complete, I try to go to the next setup which update my system, but some how, I can't get the connection working, switch mean, I couldn't do anything beyond that. (both wireless and wired network, BTW I am using DSL and I do try the adsl thing)
Every thing seem make sense to me during the installation, but I just can't get the network connection working.
BTW: my laptop is a Toshiba portege M100.
Any idea?
Thanks
Last edited by ioky (2008-06-25 06:18:58)

Try typing in:
dhcpcd eth0 (or whatever interface you are using)
and hit enter, I had the same type of problem and this woke up my network connection.
Edit: Also, once you gain your connection up and running, you might want to install ifplugd. It is a daemon which will automatically configure your Ethernet device when a cable is plugged in and automatically unconfigure it if the cable is pulled, which is good for laptops. Once installed make sure you put it in /etc/rc.conf under the DAEMONS section.
Here is some info in the wiki http://wiki.archlinux.org/index.php/Configuring_network
Last edited by ArchGentoo (2008-06-26 01:22:45)

How can i set the network time on my appleTV?

Since the last update I have been unable to use my Appletv. It says it can't get the network time. I've restarted my router and unplugged the appleTV numerous times. I've heard others have this problem too. What is the solution?

Log into your iCloud account on your computer, then click your user name in the right top then click on the time zone in the popup window.

Get Password Expiration Date of Group members in Active Directory

hi,
How can I get password Expiration date of Group members in Active Directory – please advise me
Fasil CV

Or DSQUERY Commands.
dsget group "CN=Group1,DC=myinfralab,DC=com" -members | dsget user - -acctexpires
Santhosh Sivarajan | Houston, TX | www.sivarajan.com
ITIL,MCITP,MCTS,MCSE (W2K3/W2K/NT4),MCSA(W2K3/W2K/MSG),Network+,CCNA
Windows Server 2012 Book - Migrating from 2008 to Windows Server 2012
Blogs: Blogs
Twitter: Twitter
LinkedIn: LinkedIn
Facebook: Facebook
Microsoft Virtual Academy:
Microsoft Virtual Academy
This posting is provided AS IS with no warranties, and confers no rights.

How can I get the MAC address of my Apple TV?

How can I get the MAC address of my Apple TV? I currently do not have an HDMI device to connect it to, and the MAC is not listed on the box or the Apple TV itself.
(to answer the obvious, I am trying to pair it with an iPad, and I need to register the Apple TV for the network so the two can see each other)

As long as I know java doesn't have support to work on link-layer, only internet and transport layers. You may write simple native code. On windows, IP Helper functions, like SendARP allow you to pass an IP address and get the hardware address. You store the hardware address on your database/file and later, when that machine is off, you send a frame to the address you stored previous.
[http://msdn.microsoft.com/en-us/library/aa366071(VS.85).aspx]
I haven't seen it on Linux, but if you need help let me know I'll check the Linux API's too.

Can I get a Mac email address without using the cloud?

Can I get a Mac email address without having to use the cloud? The OS on my desktop computer has not been upgraded to support it yet, but my phone will.

Apple don't provide @mac.com addresses anymore. They haven't done for years.
You can get an @me.com email address but ony by signing up for iCloud on an iOS device or Mac.

HT1600 I have an Apple TV 2nd Gen, iPad 2 and can't get the icon to appear when i swipe from left to right. What am I missing? I am able to get the 'Home sharing' 'user and password on my Mac.

I have an Apple TV 2nd Gen, iPad 2 and can't get the icon to appear when i swipe from left to right. What am I missing?
I am able to get the 'Home sharing' 'user and password on my Mac.
Also using IPad 2 I am able to get the ITunes to accept the user name and same password as the Mac.
However, the only way I can see the 'Home sharing; icon is in Music on the Ipad. When I tap on the Icon it asks for a password.
When I give the same password, it is rejected.
Help!!!!
Jaxxdiggs

Personally I think the iOS devices are poor at reconnecting - Airplay establishes that a link is available but when the iPhone/iPad has been away from the house and rejoins the network i think AppleTV already thinks it's connected with a different IP address and fails to recognise it has joined the network again with new credentials.
Something along those lines anyway.
I find that a combination of restarting AppleTV, router and iOS device tends to fix it, but not for everyone.
AC

Can I get the Mac address in Audit logs of Active directory server for the user's machine which connect to the network/Domain

Similar Messages

Maybe you are looking for