Can I have a blank field on my document when using a combo box with a drop down list in Word 2011 for Mac?

I am creating a drop down list using a combo box in the Developer tab. Once I protect my document I want the field to remain empty and not show any of the items on my drop down list. Is there a way to do this? Currently it shows one of the items on my list.
Thanks

Paul's answer is correct.
Since this is a Word IT forum for Windows, in the future you should use the
answers.microsoft.com forum. It specializes in Word for the Mac. BTW - Paul stops by there also, so you'll still get his advice from there. :-)
Kind Regards, Rich ... http://greatcirclelearning.com

Similar Messages

Can I load Microsoft Office Word 2011 for MAC on an IPAD 2? If yes, then how? I have the software and one more load opportunity left.

Can I load Microsoft Office Word 2011 for MAC on an IPAD 2? If yes, then how? I have the software and one more load opportunity left.
Reason that I ask is that I'm worried that I will not be able to read or work word or excel docs that people send me.

No. Office 2011 for Mac is coded to run with OS X. In order to work on the iPad the app must be coded for iOS instead.
If you look in the iTunes App Store, you will find that there are many apps that allow you to work with Office files on an iPad.
Allan

I'm using the note taking view of Word 2011 for Mac so I can record a meeting as well as take notes. The audio of the internal microphone is so low - can I attach an external mic and have it work with note taking view?

Can I attach an external mic to my Macbook Air to enhance sound input for the note taking view of Word 2011 for Mac? I've tried preferences to up the volume of my sound, but I still cannot hear the recording. Any suggestions? I need to record a meeting as well as take notes so I'd like to use this tool, but the audio is not good enough.

A USB microphone can work with the Air, and I've used them before with my 11" Air. Griffin also made a product (the iMic) that will add a standard computer microphone port, connecting to your USB port. It's heyday was the time of the old iBook laptops (which also lacked a microphone in jack) but I think it's still around.
The single sound port on the 2011 models, as I recall, supports iPhone style headphone/microphone but I don't believe it will support a standard microphone input.
The built in microphone sits on the left side of the computer and I suspect wouldn't work well for picking up a lecture unless you were sitting just right in position vs. the speaker (preferably having the speaker positioned to the left and sitting really close). By design most laptop microphones presume they are going to be mainly used to record a sound coming from the person sitting at the keyboard, while for a lecture you normally would prefer it concentrate on sound coming from behind the screen.

I recently upgraded to Lion and i find that my computer is running slow and applications are crashing. For example I have Word 2011 for Mac and it crashes all the time I end up losing my work. It often happens when I'm in notebook trying to record.

i recently upgraded to Lion and i find that my computer is running slow and applications are crashing. For example I have Word 2011 for Mac and it crashes all the time I end up losing my work. It often happens when I'm in class using notebook and when I press record my computer starts thinking and it freezes.
Also, I feel that it overheats often and my battery runs out pretty quickly. I had the macbook (black) and this never happened before. I'm not sure if I'm doing something wrong or if there is something with my computer.I bought my computer summer 2010, I don't think this should be happening. Please Help......

This is exactly what keeps happening to mine too. I was at a conference taking notes, and I was
using the Notebook template, and doing some audio recording simultaneously. About 3 hours into the conference (not consistently recording, but on and off with the sessions) my file wouldn't save anymore, saying something like "File cannot be modified while in use with another program" and "Invalid file name" when I would go back into my folder to look for it). I tried installing some updates from Microsoft, and when I restarted, I was at least able to open my old notes again, and so far it looks like the audio was working. However, today at the conference, the same thing happened again, but I wasn't actively recording any audio (though after I had copy and pasted my second file of notes into the original, I went back to using it after re-naming it).
Does the crash happen to you under similar cirucumstances? The update might help a little, but it is definitely not the solution. Does anyone have any solutions? Lion shouldn't be this buggy... I moved to Mac to get away from the garbage of bugs and compatibility issues...

How can I fix 'Can't Load Visual Basic for Applications' in Word 2011 for Mac?

How can I fix 'Can't Load Visual Basic for Applications' in Word 2011 for Mac? I reinstalled Office after macbook was restored and now I've tried reinstalling twice but the same error turns up. There seems to be an associated error realted to the database, which send me to Database Utility. This turns up every time I open Word, then the VBA error message turns up 4 times, or if i click on Visual Basic Editor.

in case it's useful to some other soul who searched Google in vain and found this page, I posted a fix that worked for me under https://discussions.apple.com/message/21732017

I have NO scripting experience but am attempting to create "cascading combo box" with two boxes.

I have copied and edited to the best of my ability several options but keep getting errors, mostly illegal character on line...
I do not have LifeCycle, merely Adobe Acrobat IX (and a trial version of Acrobat XI PRO) and the extent of my knowledge ends at placing fields, text, etc. . .
The scenario is as follows:
On the document, there are two combo boxes
1- "DeptName"
2- "Position"
The goal is to be able to select one of 15 different departments, and based on that selection, choose from between 2 to 15 different positions for that corresponding department.
Below is what I was hopeful would work, but alas - FAIL!!
If anyone could assist it would be GREATLY APPRECIATED!
myDeptNameValues =
"ADMINISTRATION – RSADMN (8171)",
"BEVERAGE – RSBEV (8174)",
"CATERING – RCCAT (8959)",
"CLUB – RSCLB (8174)",
"CONCESSIONS – RCCON (8961)",
"CONCESSIONS – RSCON (8173)",
"CULINARY – RSKIT (8177)",
"FACILITIES – RSFAC (6925)",
"RETAIL – RSRET (8175)",
"SUITES – RSSTE (8177)",
"VENDING – RSVND (8173)",
"WAREHOUSE – RSWHS (8173)"
this.getField("DeptName").setItems(myDeptNameValues);
var DeptData =
ADMINISTRATION – RSADMN (8171):["Teller","Security"],
BEVERAGE – RSBEV (8174):["Bartender","Barback"],
CATERING – RCCAT (8959):["Banquet Server",”Banquet Captain"],
CLUB – RSCLB (8174):["Cashier","Counter","Cook","In Seat Server","Runner","Stand Manager"],
CONCESSIONS – RCCON (8961):["Counter","Cashier","Cook","Runner","Beer Attendant/SMC","Stand Lead","Supervisor"],
CONCESSIONS – RSCON (8173):["Counter","Cashier","Cook","Runner","Beer Attendant/SMC","Stand Lead","Supervisor"],
CULINARY – RSKIT (8177):["Cook 1 – Entry Level","Cook 2 – Advanced Level","Cook 3 – Lead Cook","Kitchen Supervisor","Steward"],
FACILITIES – RSFAC (6925):["Lead – Blower/Press","Cleaning Services Worker"],
RETAIL – RSRET (8175):["Warehouse","Supervisor","Warehouse Supervisor","Vendors/Hawkers","Senior Supervisor","Associates"],
SUITES – RSSTE (8177):["Suite Attendant","Ice Cream Cart Attendant","Runner","ReOrder Clerk","Suite Captain","Pantry Supervisor"],
VENDING – RSVND (8173):["Vendor","Vendor Filler","Alcohol Compliance Supervisor","Auditor","Level Supervisor","Senior Supervisor"],
WAREHOUSE – RSWHS (8173):["Runner","Supervisor"]
function SetFieldValues(cDeptName)
this.getField("Position").setItems(DeptData[cDeptName]);
The above code was placed in the document script. Within the format area of the "DeptName" box, I have the following code placed in the keystroke script.
if( event.willCommit )
if(event.value == "")
this.getField("box2").clearItems();
else
SetFieldValues(event.value);
I have spent the past four days, more than 18 hours in the last two alone trying to nail this down and I can't explain how completely defeated I feel, not to mention frustrated.
Again, thanks for your help!!

I suppose I am not meant to figure this out. I am trying my absolute hardest to accomplish compiling this document without having to resort to asking someone to do it for me as I have noticed in a few other threads, but it just seems to get more frustrating. I have accomplished the first thing I set out to do and I completely appreciate your assistance with that. My issue now is that i have other text fields I want to automatically fill based on the selection of the very same DeptName combo box. I can make the cascading/dependent box work with the initial DeptName box, or all the additional text fields with the DeptName box, but cannot seem to accomplish having them work together. I have been working daily, reading blogs/forums, watching videos all in an effort to complete this before it's needed on Feb. 2.
Is it possible to make 7 text fields and a combo box(B) fill based on the selection of a separate combo box (A), and then have 5 more text fields automatically fill based on the selection from the secondary box (B)? I can make it all happen individually, meaning only the text fields for one box or the combo box (A to b) but not in conjunction.
http://1drv.ms/1GDpESS
This is the file, if it helps to see what I'm hoping to accomplish

Use of Zero (0) in Required Drop-Down List Field

Using LiveCycle Designer ES 8.2.1x and Acrobat Pro Extended 9.1.2.
I have a drop-down list (DDL) on a form for entering a quantity. For certain reasons (i.e., quantity bundling/packages), I want to use a DDL.
For one thing, if I set the default value to zero (0), that value does not appear in the DDL in the published form.
Moreover, I've set the field to "User Entered - Required". However, the form doesn't recognize/validate zero (0) as an entry in this field, and I need it to.
Is there a trick to using a zero (0) as a value in a DDL, esp. one set to "required"?

I too was unable to recreate the error/condition, so, I deleted and
re-inserted the fields, without a problem.
B

I have an old user name tht is no longer accessible. I access fierfox through a new user name. I have copied the profile from the old user name. Can I have 2 profiles from which to choose when using firefox in the under the new username?

I have a user name on my computer that was tied in with the domain name of the server at my workplace. I would access Firefox under this user name. I have now changed jobs, and for good and obvious reasons can no longer utilize my previous company associated username.
I have set up a new username on the same computer. When I access Firefox, all of my old bookmarks are gone, because Firefox does not recognize me under the new username as the same person. In the meantime, I have established new bookmarks under the new username.
I have copied my profile from Firefox under my old username. Can I have two profiles under my new username and pick which one I want to use at that time when accessing Firefox?
I am running Windows 7 Professional, with 4 gig ram, Intel i3 CPU, 2.13 GHz, 64 bit operating system, Firefox 7.0.1
Thank you

You can not merge accounts.
Apps are tied to the Apple ID used to download them, you can not transfer them.

Word 2011 for Mac Book pro - I have found that my cursor disappears sometimes when I click on a toolbar function. I found out it is a bug, that the Mac loses 'focus'. I can correct it temporarily by clicking on Format - Font - Cancel. Any info?

I have Word 2011 on a Mac Book Pro and have had problems with a dissapearing cursor - it makes editing tricky
After googling it I found out that there is a bug where the Mac loses focus if you click away from the document - it also does this with italics according to other users.
I had a play with it and found out that when I click on the toolbar in a document where this happens, the cursor disappears, e.g. changing font colour etc. And then, when I click on Format - Font - Cancel it returns
I'd be interested if anyone else has a comment to add, please do
thanks

BTW (speaking as a Dad of 3 daughters in Grad school) if you don't already have and use a DropBox account, or some other similar online "cloud" based backup of your school documents, you should start doing so immediately. By keeping all of your important documents in the Dropbox folder on your computer, you have instant access to them from any other computer (or iPad), should you be w/o your computer while in for repairs (or if, God forbid, it is stolen). It's free for 2 GB of online storage, which is more than enough for a few years worth of Word documents, etc. (If you get other people to sign up via your email "invitation", then Dropbox gives you even more free storage space.) Every time you close a document, it is updated on the Dropbox servers (encrypted), if it is in the Dropbox folder (assuming you give it a few seconds to update before turning off your computer). Do a google search of "Cloud based storage comparisons" to compare the amount of free space each of the competing services give you.

How to insert blank page into pages document when using word processing mode?

I've recently created a 50+ page document using Pages '09. I started the document using word processing mode. Now, when I view in thumbnail mode and try to insert a blank page somehwere in the middle of the document, it won't allow me to select where I want. It just selects all the pages, as thought they are one section. I believe this is because I am in word processing mode. My question is, can I convert the document to layout mode so that each page represents it's own section, without losing what work I've already done? And if so, how?
The document is entirely text boxes and images, so I don't have any need for word processing space. I just need new pages to act as blank templates for the text boxes and images I create.
Is it possible to keep all my work as is, and convert the document to layout mode vs. word processing mode?
Thanks!

It just selects all the pages, as thought they are one section.
That's because they are one section. You must insert section breaks to separate them. There is no need to use page layout which does make each page a separate section. You have to manually add each page & use text boxes or other containers for the text & link the text boxes.

Populate a drop down list with data from Excel and fill in a text field, based on drop down selectio

Hi!
I have a problem with a PDF form: There's a drop down list that I populate with Excel data that I've put in an XML file through an XSD file -- no problem here. The drop down list has a data binding to the XML file, so that a choice in the drop down list can be associated with an object in the XML file. So, when I make a choice in the drop down list, a corresponding object value is fetched from the XML file and put in a text field on the form.
How to do this is described by Stefan Cameron here:
http://forms.stefcameron.com/2006/07/29/dynamic-properties/
There's a snag, though, and to describe it more clearly:
The XML file contains three types of objects: role, role number, and role cost center. Of these I use the first and the third, i.e. the role and the role cost center. The drop down list contains the roles, and when I select a role, the corresponding cost center is filled out in the text field. So far, so good!
But -- if the cost center has the same value for two or more roles, all of these roles "bounce back" into the drop down list, that is, they are all selected in the drop down list. How many of these you can see depend on the height of the drop down list -- if it's low you'll only see the first one.
If I modify Stefan Cameron's data in his example I get the same behavior, so the problem seems to have to do with how XML data are fetched.
I'm sure there's a workaround, but I can't find it! I've spent many hours browsing the web without finding anyone with a similar problem.
Any suggestions appreciated!

Although your issue is far beyond mine, I was hoping you can help me out.....
I need to create a drop down list of names which I wish to somehow link to an Excel spreadsheet.
Please let me know the steps I need to do. I've tried several things, but nothing seems to work and I'm not sure what I am doing wrong.
Thank you

Using the same field on a form for multiple menu/drop down list

I have a form that tracks people that attend orientations. It is possible for an Attendee to attend the same orientation up to three times.
In using the Update record wizard, I have two recordsets, rsAttendees and rsOrientation from two separate tables.
I want to be able to use the rsOrientation to create a drop down list, but I want to use that same recordset field as the source for the dropdown 3 times on the same record.
There are 3 fields on the Attendee form:
Orientation1, Orientation2, and Orientation3.
Using the wizard, I set each up as a Menu, then select the rsOrientation, Orientation.Date as the source for all 3.
The problem is that only the Orientation1 field is populated. Orientation2 and Orientation3 dropdowns are blank.
Name:________________________
Orientation1: __________________<-----------Using Wizard, pull Menu list from Orientation.Date This one works fine
Orientation2: __________________<-----------Using Wizard, pull Menu list from Orientation.Date This one is blank
Orientation3: __________________<-----------Using Wizard, pull Menu list from Orientation.Date This one is blank
Do I need to reset the rs somehow?

>Do I need to reset the rs somehow?
Very possible. You haven't mentioned what server model you are using.

Populate drop-down list from multiple text fields.

Just to begin, I am brand new to this application and brand new to coding in general. Anyways, this is what I am trying to accomplish. I need to populate a drop-down list from multiple text fields. I am able to populate one item using this in the calculate event:
TextField1.rawValue
After I type text in TextField1 and hit enter, it displays the text in the drop-down list. I need to do this but with more than just one text field to populate more options for the drop-down list. I will also need to do something similar with populating a drop-down list from selections made in multiple other drop-down lists.
Thanks for any help you can give me.

Thank you for your suggestion Geo Kaiser. With that, I was able to populate my drop-down lists, but now when I select an option from the drop-down list, the selection dissapears. The selection will appear briefly in the box but then dissapears although my drop-down list options remain there. Here is the code I am using for my text field to drop-down list:
DropDownList1.clearItems()
DropDownList1.addItem(TextField1)
DropDownList1.addItem(TextField2)
And here is my code for my drop-down list to populate another drop-down list:
DropDownList3.clearItems()
DropDownList3.addItem(DropDownList1)
DropDownList3.additem(DropDownList2)
Thanks again for your help. By the way, I am using Adobe Designer 7.0.

How to auto populate a field based on drop down list unless specific item is selected

Hi all,
Apologies if I have posted this in the wrong area but I am new to Adobe LiveCycle, JavaScript and these forums.
I am trying to build an Acrobat form using LiveCycle but am having trouble with the drop down lists.
Inititaly I simply wanted to populate fields in one table based on the selection of a corresponding drop down list in another table.
I used the following code and it worked fine:
Workbook.Content.Table1.Row3.AppropriationDetails.Row4.Cell1::change - (JavaScript, client)
var fFrom = xfa.resolveNodes("Workbook.Content.Table1.Row3.AppropriationDetails[*].Row4.Cell1");
var fTo = xfa.resolveNodes("Workbook.Content.Table2.Row3.AppropriationDetails[*].Row4.Cell1");
for (var i=0; i <= fFrom.length-1; i++) {
     fTo.item(i).rawValue = fFrom.item(i).boundItem(xfa.event.newText);
The problem is that now I want the above code to work UNLESS one of the items in the dropdown list is specifically selected in which case I want the text box in the other table to display a message such as "Enter details in the field below".
I have tried to create an If Else statement using the following code:
Workbook.Content.Table1.Row3.AppropriationDetails.Row4.Cell1::change - (JavaScript, client)
var fFrom = xfa.resolveNodes("Workbook.Content.Table1.Row3.AppropriationDetails[*].Row4.Cell1");
var fTo = xfa.resolveNodes("Workbook.Content.Table2.Row3.AppropriationDetails[*].Row4.Cell1");
for (var i=0; i <= fFrom.length-1; i++) {
     if (fFrom.item(i).rawvalue = "Option 3"){
     fTo.item(i).rawValue = "Enter details in the field below";
     else {
     fTo.item(i).rawValue = fFrom.item(i).boundItem(xfa.event.newText);
The code now populates the field with "Enter the details in the field below" no matter what item I select from the dropdown list.
Your help is greatly appreciated.
Cheers,
ozzy_q

Follow Up:
Ok so ive changed things up a bit and have had some more success.
I have used a Switch statement in my For loop to perform different actions based on the item selected.
The code looks like this:
Workbook.Content.Table1.Row3.AppropriationDetails.Row4.Cell1::change - (JavaScript, client)
var fFrom = xfa.resolveNodes("Workbook.Content.Table1.Row3.AppropriationDetails[*] .Row4.Cell1");
var fTo = xfa.resolveNodes("Workbook.Content.Table2.Row3.AppropriationDetails[* ].Row4.Cell1");
for (var i=0; i <= fFrom.length-1; i++) {
     switch (fFrom.item(i).rawValue)
     case "Option 3":
     fTo.item(i).rawValue = "Enter the details in the field below";
     break;
     default:
     fTo.item(i).rawValue = fFrom.item(i).boundItem(xfa.event.newText);
     break;
This code solves my problem but has thrown up a new issue:
When i select Option 1 or 2 from the dropdown list the change in the text field is instantaneous, however if I select Option 3 it wont appear in the text field until I either select Option 3 a second time or select another item. Its as if the text field is a selction behind what I have enterd in the dropdown list.
Any thoughts?

Adding Drop Down List values from table fields

Hi all,
Recently we have switched from Microsoft's Infopath to Adobe's LiveCycle Designer. In InfoPath i was able to allow a user to enter data in a table and then use that data as values for a drop downlist, which could in turn be used in another table. Infopath made it relatively easy to do this, but I assume it requires scripting in LiveCycle. Here is an example that make make it easier to to explain:
Let's say we have a form with a table that has a colomn where the user can enter a value in a table let's say "Computer Name":
Computer Name | IP | Vendor | Serial Number|
PC 1
---------------------| 192.168.2.34| HP | US4839494
PC 2
PC 3
PC 4
Further down the form there is a nother table with a drop down list. I want the values of the drop down list to be what ever values were entered for "Computer Name" in the previous table. So in this case the table would look like this:
Computer Name | Acquisition Date| End of Life Date
<Drop DownList>| 07/21/2010 | 07/21/2014
The drop downlist values would be "PC1, PC2, PC3, PC4" or whatever values were entered in the previous table. Essentially, I am trying to avoid from having users type in "Computer Name" data every time the "Computer Name" needs to be entered. It would be so much easier to enter all "Computer Name" values and then use those values as part of a drop down list to avoid excessive typing.
I hope this makes sense, it is fairly easy to do in InfoPath and I am sure there is a way to do this in LiveCycle.
Let me know if my explanation is not clear enough.
Thanks!

Thanks for the feedback, but it doesn't seem to quite accomplish what I am trying to do. I've tried using global binding as you specified, but the outcome is not exactly what I want. Perhaps this drawing can help depict what I am trying to do:
http://imageshack.us/photo/my-images/153/dropdownlist.png/
On the picture I manually defined the values for the drop down list. Again, I want these values to be taken from "Computer Name" in the table above.
Thanks!

Can I have a blank field on my document when using a combo box with a drop down list in Word 2011 for Mac?

Similar Messages

Maybe you are looking for