Can I hook use an  older iMac as an display for my Macbook Pro?

Can I use an older iMac as an display for my Macbook Pro?  The Macbook Pro has the Mini display port and the iMac has the older (larger) display port.  I am trying to have a document open on the iMac while writing a paper on the Macbook Pro.
Thank you for your time.

Welcome to Apple Support Communities
You can use the Mid 2011 iMac as a display for your 2011 MacBook Pro. Both have Thunderbolt, so you won't have any problem > http://support.apple.com/kb/PH11302?viewlocale=en_US&locale=en_US
Buy a Thunderbolt cable and press Command and F2 keys on the iMac to enable Target Display

Similar Messages

  • Can I use a 2009 iMac as external display for 2007 macbook pro with DVI port only

    I have a late 2009 imac with minidisplay port and  a 2007 macbook pro with DVI port. I connected a mini diaplay port to DVI cable but all I get on the imac is a blank screen when I press F2. Can I use the imac this way?

    I'm not sure if it works with DVI but your late 2009 must be a 27". Try Command-F2 or Copmmand-Fn-F2

  • Can I use my iMac as a 'display' for my MacBook Pro?

    Hi all, I am really hoping someone can help me here.
    I am wondering if I can use my 24" iMac as a display for my MacBook Pro (both running Snow Leopard).
    It's my father's 80th birthday party in about 24 hours time. I am doing up the music and slideshow (thanks Apple - so easy!).
    My plan was to simply take my iMac and use it. However, I managed to drop the wireless keyboard (darn those dogs) and now my keyboard won't work. I have no backup keyboards here (gave the wired one to Dad to use with his Mac mini). I live in a country area with no access to a Mac store and it will take more than 24 hours to get a new one. Went to my local 'other computer' general store last night: I really don't want to buy an ugly black keyboard..... I have just had a great idea:
    Can I network my MacBook Pro and use it as the source for the slide show and simply use the iMac as a display? I have plenty of DVI adaptors but am just not sure how I would go about the software side of things? Or should I simply buy an ugly PC keyboard (and if I do, will the WIndows button work as an Apple button???)
    Any suggestions would be really appreciated.
    Thanks!

    The imac 24 can't be used as a monitor over a DVI connection or the like, Suzanne, but you may be able to achieve what you want to using "Screen Sharing" by networking the two computers. This lets your MBP effectively control what is running on the iMac.
    See HERE for the basic setup. For information about how to access the "shareable" screen from the MBP see HERE.
    One possible problem may be actually getting this set-up on the iMac if it is not already enabled, however, unless you can borrow a keyboard from someone (your password may have to be entered to enable it). You may be able to get around this, if necessary, using the "keyboard viewer" (which you can place in the menubar using System preferences > Keyboard, if you don't already have it there).
    Cheers
    Rod

  • TS1367 Is there are a way to use my imac as a display for my macbook pro? I have a thunderbolt cable but it doesnt seem to do anything

    Is there are a way to use my imac as a display for my macbook pro? I have a thunderbolt cable but it doesnt seem to do anything

    Hello eassic,
    Thanks for the question, and welcome to Apple Support Communities.
    It sounds like Target Display Mode may be what you are looking for:
    Target Display Mode lets you use a Mac as the external display for another “primary” Mac. In some cases, you can also play the sound from your primary Mac on the speakers of the external Mac. For example, a MacBook Pro could use a 27-inch iMac as the display and play its audio on the iMac as well.
    OS X Mountain Lion: Use another Mac as a display
    http://support.apple.com/kb/PH11302
    Use an iMac with Thunderbolt as a display
    If you have an iMac with Thunderbolt, any other Mac with Thunderbolt can use it as a display. The iMac will play both the video and audio from the other Mac.
    1. Connect the Thunderbolt cable to the Thunderbolt ports on each computer.
    2. Make sure both Mac computers are turned on and awake.
    3. Press Command (⌘)-F2 on the keyboard of the external display Mac.
    4. If you want the external display Mac to play audio as well as video from the primary Mac, choose Apple menu > System Preferences, click Sound, and then click Output. Select the external display Mac from the list of devices.
    Thanks,
    Matt M.

  • How can I use my iMac6.1 as a display for my MacBook Pro

    I have a relatively old iMac 6.1 that I would like to use as a diplay for my MacBook Pro:  any idea of how I can do that and what connecting cables I would need?
    Thanks.
    Vittorio

    Unless the MBP has Thunderbolt you can't use the iMac as an external monitor unless you get ScreenRecycler. If the MBP does have Thunderbolt you need a Thunderbolt cable. Because Thunderbolt is so new finding a cable could be quite a challenge, you may want to contact Lacie and see if they can sell you one other than that I have no idea where to find one now. 

  • Can I use a PowerPC iMac as a monitor for my MacBook Pro?

    I have an early 2011 MacBook Pro running Mountain Lion. I need an external monitor for it and have an old iMac laying around that I'm wondering if I could use. The iMac is the first gen white square all-in-one screen one. It's a G5, 20" 1.8 GHz from 2005. PowerPC.
    Can I connect my MacBook Pro to it to use as a second monitor? Or even to mirror the display? If so, what kind of connector cables do I need to make this happen?

    You need to use a product such as ScreenRecycler over a network connection. All of these products require the capability to boot the iMac.
    (72779)

  • HT3924 using 2008 imac 24" as display for 2011 macbook pro

    can i use my  2008 iMac 24" as the display for my 2011 Mac book pro

    Not really on that year, only thing that may work for you is Screen Sharing, where you run one from the other one, but not much help with what you wan't.

  • Can I use my iMac (20" G5) as a display for the MacBook Pro 13"?

    Can I connect an iMac(20" G5) as a display for the MacBook Pro 13"? If yes, what adapters I need? Does it need modification or software for the iMac?

    You need to use ScreenRecycler or a VNC client.
    (49933)

  • Can i use a thunderbolt display for my macbook pro and hp laptop with windows 7 and what adapters will i need

    Can i use a thunderbolt display for my macbook pro and hp laptop with windows 7 and what adapters will i need

    Hi jayhrab,
    Currently, the system requirements listed for an Apple Thunderbolt Display are:
    Thunderbolt-enabled Mac computer, including MacBook Air, MacBook Pro, Mac mini, and iMac
    OS X v10.6.8 or later
    Apple - Thunderbolt Display - Read the tech specs.
    Regards,
    - Brenden

  • How do i use my imac 21.5" 2011 as a display for my macbook pro late 2011, through thunderbolt cable ? I have tried and it doesnt seem to work, neither does target disk mode.

    How do i use my imac 21.5" 2011 as a display for my macbook pro late 2011, through thunderbolt cable ? I have tried and it doesnt seem to work, neither does target disk mode.
    Could it be a borked cable ? I just bought it new from the store today, i have updated both imac and macbook pro to latest thunderbolt firmware and updates. Both 10.7.3.
    MacBook Pro:
      Vendor Name:    Apple, Inc.
      Device Name:    MacBook Pro
      UID:    0x0001000A17016E60
      Firmware Version:    22,1
      Port:
      Status:    No devices connected
      Link Status:    7
      Port Micro Firmware Version:    FFFF.FF.FF

    You are correct, here is what Apple Says:
    http://support.apple.com/kb/TS3775
    I was able to find these instructions, however they referr to 2009-2011 27" iMacs. I think it's the same, if it's not then contact Apple directly for instructions. If either of the machines is less than 90 days old or covered by AppleCare then call AppleCare tomorrow for help, they should be able to easily answer this for you. You will find the number in your manual or you can use the AppleCare Contact Info link.
    Your iMac should automatically recognize the presence of a digital video signal at the Mini DisplayPort and enter Target Display Mode.
    If your iMac does not automatically enter Target Display Mode, press command + F2 to manually enter Target Display Mode.

  • 27" iMac (refurb, June 2011) not working as an external display for my MacBook Pro.

    I just got a 27" iMac (refurb, June 2011) and it's not working as an external display for my MacBook Pro (not Thunderbolt).  Any idea why?  Command+F2 does nothing.  I am connecting via Belkin Minidisplay Port-to-Minidisplay Port adapter.
    Any help is appreciated...thanks!

    Currently the ThunderBolt iMacs can only be used as an external display by other ThunderBolt Macs.
    http://docs.info.apple.com/article.html?path=Thunderbolt/10.6/en/30822.html
    Apple is very clear about that.
    2009 and 2010 27" iMac with a Mini DisplayPort can be used by other Macs with a MDP-to-MDP cable.
    Stefan

  • Can I return My IMac to exchange it for a Macbook Pro?

    I have had a IMac 27 inch since march and it is the newest one. I dont like it, so can i return it for a macbook pro? I have the receipt and everything that it was bought with.
    Please let me know, because im going to the apple store soon!

    If it is past 30 days then no you cant, which by what you said in your post; you purchased in march. If it is in the past 30 days then you will most likely only be able to do it through corporate apple. To the best of my knowledge the Apple retail stores aren't fit to handle returns and exchanges all that well. So call 1-800-my-apple or chat with an apple store rep to ask about exchanges. If you want directions for how to chat then just ask, they are lengthy so I don't want to type them if you aren't going to use them.
    Remember, you can only exchange/return within 30days, restocking fees may be applied. See Apple, Inc. For more information.

  • Using imac as external display for my MacBook

    Can I use the new iMac as an external display for my MacBook?

    Here's the >New iMac Spec's and there is only Mini-DVI output port and "NO" input port.

  • Use 21.5 inch mid 2010 imac as a display for 2013 macbook air?

    I would like to use my 21.5 inch mid 2010 imac as a display for my 2013 macbook air. I tried using Screen Recycle, however I would prefer more of a monitor situation than a side-by-side extra screen situation. Ideally with my wireless keyboard and mouse. Does anyone have any advice, or am I asking too much from apple? Thanks very much.

    Yes. With an Ethernet cable and a product such as ScreenRecycler.
    (62511)

  • How can I use my Iphone as wireless internet receiver for my MacBook Pro?

    Can anyone tell me how to use my Iphone 4 a wireless internet receiver for my macbook pro? Thanks & greeting from the Netherlands! Matthijs

    Apple!!!! Please listen to your customers!!!!
    http://finance.yahoo.com/news/Smartphone-Fans-Want-FM-iw-1184795842.html?x=0&.v= 1
    Give us or make us pay for FM app already!!!!!
    http://www.tomsguide.com/us/Apple-iPhone-iPod-FM-Receiver,news-4855.html

Maybe you are looking for

  • Windows Zero Configuration does not start automatically

    It won't start automatically, even though I have set it to automatic in the Services Tab. Every time the computer goes to sleep, logs out or restarts, I have to go back into Services and restart it. How can I get it to start automatically. NOTE: I HA

  • Fatal error in data pump import

    Hi Please help me in solving this error while importing data from dmp file Import: Release 10.1.0.2.0 - Production on Thursday, 15 February, 2007 3:54 Copyright (c) 2003, Oracle. All rights reserved. Connected to: Oracle Database 10g Enterprise Editi

  • Oracle 10g - Insert in to Temporary Table - Record count mismatch between s

    We are trying insert records from a select query in to temporary table, some of the records is missing in the temporary table. The select statement is having multiple joins and union all which it little complex query. In simple terms the script conta

  • BAPI for POST INVOICE

    Hi all,     Which is the BAPI used to Post an Invoice after the delivery has been made. Thanks, Madhan.

  • Flex, CF, SQL project

    I have project in (web development) Flex ColdFusion and SQL. I need someone to work on that project from beginning to end. I want a person who I can email if there is a problem and the problem is fixed in 24 hour period. The project hasn't started ye