Can I increase size of Note Icon?

Hi, I've just got a new computer which has Acrobat 7.0.9 on it. When I add a comment to a large image (e.g. 30 x 40 inches) the note icon is very tiny and hard to notice. On my old computer which also had Acrobat 7 (not sure which exact version) the note icon looked as large on a large image as it did on an 8.5 x 11 inch page.
Can I increase the size of the note icon? Looking at the properties, it seems I can only change the colour and opacity. I'm not sure why the size of the icon has decreased - maybe it's because I have a more updated version of Acrobat?
Cindy

Hello All,
Again, please remember that modification of the B1 tables is not supported in any way. There are too many possible consequences for this action (upgrade failure, subsequent data processing, data loss, loss of support to name a few)
Should anyone see this type of request in the forums please adice strongly against; thanks to those already who have replied.
Regards,
Paul

Similar Messages

How can I increase the font and icon sizea little in Firefox 7

I have been using Firefox for years. With the change to Firefox & , and using the same glasses, I have to crane my neck forward to read the text. This is a new problem starting with Version 7. I do not want to increase the font and icons very much but they need to be a little bigger. Can this be done?

-> [[How do I use Zoom?]]
* press '''CTRL + +''' to '''Zoom In'''
* press '''CTRL + -''' to '''Zoom Out'''
* press '''CTRL + 0''' (zero) to '''Reset Zoom'''
Check and tell if its working.

How can i increase size of applet

when i run my form in windows my applet don't visible full .how can change the size of applet.what property i have to set.i forget that property.

are you using an application server or the local OC4J container?
In both cases the height and width of your applet can be set in the formsweb.cfg file.
you can find this file under <oracle_home>/forms/server directory
search in the file for with and height
you can put a fixed size in pixels or in percentage of your screen resolution
hope it helps
Erwin

When placing icons on the menu bar, I can not increase size to large icons. I can make icons larger when putting icons on other bars below menu bar. Never had this problem with any earlier version of FF

This happens with all icon themes including default. I like having the large icons on the menu bar so hopefully this can be fixed.

NO way.
Mylenium

Oracle 11.2 default instance volume is 50 GiB - How can I increase size?

Hi,
I created an ebs Oracle 11.2 instance that defaulted to a volume size of 50GiB.
Does anyone know how to increase the volume size to 300GiB?
This didn't work:
I created another volume (300Gib), attached it to the instance, mounted the drive, but when I ran the Oracle install script - that drive didn't show up:
Select a disk device to store your datafiles and redo logs on:
ID DEVICE_NAME
[0] Refresh List
[1] Use Default
[2] /dev/sdc1
Thanks.

I didnt have any luck with the scripts it comes with the AMI so I just cut and paste of what I need heres the script I use.
You can mount the 300G to /u02 or whatever you want
and change the ORACLE_SID to <YOUR_SID_NAME>
Also you have to run it as user oracle instead of Root
and make sure that the ORACLE_HOME is correct
ORACLE_SID=<YOUR_SID_NAME>
SID=${ORACLE_SID}
GLOBAL_NAME=${SID}
SYS_PWD=s
SYSTEM_PWD=s
DBSNMP_PWD=s
SYSMAN_PWD=s
DBF_MOUNT=/u02
FRA_MOUNT=/u02
ORACLE_HOME=/u01/app/oracle/product/11.2.0/db_1
DBCA_TEMPLATE_DIR=${ORACLE_HOME}/assistants/dbca/templates
DBCA_TEMPLATE_NAME=${DBCA_TEMPLATE_DIR}/General_Purpose.dbc
ORACLE_OWNER=oracle
DBCA=${ORACLE_HOME}/bin/dbca
SQLPLUS=${ORACLE_HOME}/bin/sqlplus
EMCTL=${ORACLE_HOME}/bin/emctl
DB_FILE_DIR=${DBF_MOUNT}/oradata
RECO_AREA=${FRA_MOUNT}/flash_recovery_area
CHARSET=AL32UTF8
export ORACLE_SID=${SID}
mkdir -p ${DBF_MOUNT}/admin/${ORACLE_SID}
mkdir -p ${DBF_MOUNT}/admin/${ORACLE_SID}/dbs
mkdir -p ${DBF_MOUNT}/admin/${ORACLE_SID}/adump
export EMKEY_LOCATION=${DBF_MOUNT}/admin/${ORACLE_SID}/dbs
echo
echo "Please wait while your database is created..."
echo
${DBCA} -silent -createDatabase -templateName ${DBCA_TEMPLATE_NAME} -gdbName ${GLOBAL_NAME} -sid ${SID} -sysPassword ${SYS_PWD} -systemPassword ${SYSTEM_PWD} -dbsnmpPassword ${DBSNMP_PWD} -sysmanPassword ${SYSMAN_PWD} -emConfiguration LOCAL -storageType FS -datafileJarLocation ${DBCA_TEMPLATE_DIR} -sampleSchema true -datafileDestination ${DB_FILE_DIR} -recoveryAreaDestination ${RECO_AREA} -characterSet AL32UTF8
RV=$?
if [ $RV -ne 0 ]
then
echo
echo "There was a problem creating your database. Please review the log file shown above."
else
${EMCTL} stop dbconsole
${SQLPLUS} /nolog << EOF
${SQLPLUS} /nolog << EOF
connect / as sysdba
alter system set audit_file_dest='${DBF_MOUNT}/admin/${ORACLE_SID}/adump' scope=spfile;
EXEC DBMS_XDB.SETHTTPPORT(8080);
ALTER USER anonymous ACCOUNT UNLOCK
@${ORACLE_HOME}/apex/.apxxepwd_custom.sql ${APEX_PWD}
shutdown immediate
exit
EOF
mv $ORACLE_HOME/dbs/spfile${ORACLE_SID}.ora ${DBF_MOUNT}/admin/${ORACLE_SID}/dbs/.
mv $ORACLE_HOME/dbs/orapw${ORACLE_SID} ${DBF_MOUNT}/admin/${ORACLE_SID}/dbs/.
ln -s ${DBF_MOUNT}/admin/${ORACLE_SID}/dbs/spfile${ORACLE_SID}.ora ${ORACLE_HOME}/dbs/.
ln -s ${DBF_MOUNT}/admin/${ORACLE_SID}/dbs/orapw${ORACLE_SID} ${ORACLE_HOME}/dbs/.
${SQLPLUS} /nolog << EOF
connect / as sysdba
startup mount
alter database archivelog;
alter database open;
exit
EOF
${SQLPLUS} /nolog << EOF
connect sysman/${SYSMAN_PWD}
@/home/oracle/scripts/osbws/submit_osb_cloud_backup.pls
exit
EOF
${EMCTL} start dbconsole
echo
grep ORACLE_SID /home/oracle/.bash_profile > /dev/null 2>&1
if [ $? -eq 0 ]
then
echo "Not adding ORACLE_SID=${SID} to /home/oracle/.bash_profile"
echo "because ORACLE_SID is already set in that file."
else
echo "Adding ORACLE_SID=${SID} to /home/oracle/.bash_profile"
echo "export ORACLE_SID=${SID}" >> /home/oracle/.bash_profile
fi
OH="\/u01\/app\/oracle\/product\/11.2.0\/db_1"
cp /etc/oratab /tmp/oratab.bak
sed "s/${ORACLE_SID}:${OH}:N/${ORACLE_SID}:${OH}:Y/" /tmp/oratab.bak > /etc/oratab
echo
echo "The database was created successfully."
fi
echo
echo
/home/oracle/scripts/setup_osbws.sh
echo
echo "You can connect to your database as follows:"
echo
echo "Command Line: sqlplus sys/<your-password> as sysdba"
echo "Enterprise Manager Database Console: https://${ORACLE_HOSTNAME}:<port number>/em e.g. https://${ORACLE_HOSTNAME}:1158/em"
echo "Oracle Application Express (APEX): http://${ORACLE_HOSTNAME}:<port number>/apex e.g. http://${ORACLE_HOSTNAME}:8080/apex"
echo "Actual ports numbers can be found in ${ORACLE_HOME}/install/portlist.ini file. If this is the first database being created on this machine, the above example URLs should work."
echo
echo "Thank You for choosing Oracle Database on EC2."Edited by: vxwo0owxv on May 11, 2011 1:01 PM

Can we increase size of launch pad dots

We're teaching seniors how to use Mac OS X. We've already increased the size of the cusor (either Accessibility or Universal Access depending on whether you have Lion or Mountain Lion) so now the seniors aren't having too much of a problem finding their mouse pointer.
However, when we go to Launch Pad, where we have two screens of applications, many of them can't reach the second screen. Normally, the tip of the mouse pointer arrow is the "active" part of the pointer but not when you've increased the size of the pointer. The dots on the Launch Pad screen are so small, many of our seniors haven't been able to find the correct location to have the arrow on the dot in order to display the second screen, or to get back to the first screen if they're lucky enough to get to the second screen.
We're now resorting to having them use the keyboard shortcuts because using the mouse just isn't time effective and it's frustrating to the seniors. Is there an option that we haven't been able to find which would allow us to increase the size of those dots so it would be easier for our seniors to click on them?
Now, I know someone is going to respond about using the two finger swipe on either the Magic Mouse or the Magic Trackpad. We're a SeniorNet Computer Learning Center so we teach both Windows and Apple classes. We're using Mac minis and Windows style mice and keyboards. We can't afford to buy either the Magic Mouse of the Magic Trackpad for our Apple systems.
Tom Adams (SeniorNet volunteer)

Thx for replying Lars... but dont I have any other option besides using Affine transform for each sprite.. it will make my code little clumsy..
It must be possible to zoom whole JPanel in someway!!
I have many sprites.. want to put sprites together in 128*128 pixels only in reality.. so that I can save its location data for mobile games..
but when making animation I can able to zoom JPanel so that I can look where i am putting sprites..
Please if somebody know it.. tell me how to do it!!.. or any other alternative!!
I am stucked in my project bcoz of that..
gervini

How can you increase size of iweb photo album?

In iWeb albums there seems to be a maximum of 500 photos or 5 pages. Can you add more than 500 photos to the same album? How?

are you using an application server or the local OC4J container?
In both cases the height and width of your applet can be set in the formsweb.cfg file.
you can find this file under <oracle_home>/forms/server directory
search in the file for with and height
you can put a fixed size in pixels or in percentage of your screen resolution
hope it helps
Erwin

Why can't I check the Notes icon in the iCloud system pref?

After upgrading my iMac on 11/19, I'm trying to get the Notes app to sync with iCloud, as I use my iPads' Notes app extensively at work. When I open the iCloud system preference, the Notes app is checked at first. It then becomes unchecked and when I try to re-check the box. system preferences quit unexpectedly. I've also tried adding a note first on the iMac, and then going into iCloud system preferences, but get the same result.
Thanks in advance for your help,
Mike

OK, reading others posts about multiple accounts, I went into the Notes on my iPad, and clicked the Accounts button. Sure enough, all of my notes on the iPad were under the account Yahoo. Going into Notes on my iMac, and then going into Accounts under the Notes menu item, I only had iCloud and att.net. When I chose the att.net account AND checked the Notes box, all of my iPad notes synced with the iMac.
I agree with a previous poster in another message, this is not made clear how to set this up. I guess I lucked out that all 3 of my iPads are set up identically with regards to Notes, Accounts, and iCloud.
Hope this helps someone else.
Mike

Reducing size of datatype involved in index fails where as increasing size work

This question is related to my question in SO Database
events that will cause deletion of index
For example if i create a table like
CREATE TABLE dbo.Customers (ID INT IDENTITY(1,1) PRIMARY KEY CLUSTERED, CustomerName NVARCHAR(200));
CREATE INDEX IX_CustomerName ON dbo.Customers(CustomerName);
And then try to change column datatype like shown below to 230 from 200.
alter table Customers
alter column CustomerName nvarchar(230) null
The above alter command runs successfully and index IX_CustomerName is not dropped.
But if i try to reduce the size of column to 150 from 200 then it shows error.
alter table Customers
alter column CustomerName nvarchar(150) null
I get error like
Msg 5074, Level 16, State 1, Line 1
The index 'IX_CustomerName' is dependent on column 'CustomerName'.
Msg 4922, Level 16, State 9, Line 1
ALTER TABLE ALTER COLUMN CustomerName failed because one or more objects access this column.
So reducing the size(data may loss) of a column does not work if index is present on a column where as if the index not present then above
query works successfully. So why does it does not allow reducing the column when index present where as increasing size does not show any problem and works?

Hello,
Indeed, a little bit strange even because in BOL it's documented for a different behaviour, see
ALTER TABLE (Transact-SQL) => Remarks =>
"Changing the Size of a Column
You can change the length, precision, or scale of a column by specifying a new size for the column data type in the ALTER COLUMN clause. If data exists in the column, the new size cannot be smaller than the maximum size of the data. Also, the column cannot
be defined in an index, unless the column is a varchar, nvarchar, or varbinary data type and the index is not the result of a PRIMARY KEY constraint. See example P."
Olaf Helper
[ Blog] [ Xing] [ MVP]

I have Photoshop cs6 Ext on an ASUS laptop. How can I increase the font size of the contents of the FILTER Panel situated on bottom left of screen. The font size is extreamly small and almost unreadable. I have changed display parameters, not the resoluti

I have Photoshop cs6 Ext on an ASUS laptop. How can I increase the font size of the contents of the FILTER Panel situated on bottom left of screen. The font size is extreamly small and almost unreadable. I have changed display parameters, not the resolution, to no avail.
David.

Paragraph breaks are good for readability. ;-)
Have you noticed any difference between your MacBook and others at the Apple store? Wondering whether this is a configurable setting at the system level, i.e., DPI.
You can default Firefox to a larger zoom level to avoid having to zoom every page. You'll still be able to adjust the size for individual sites as needed. It sounds as though you are aware of these add-ons:
* Default FullZoom Level: https://addons.mozilla.org/firefox/addon/default-fullzoom-level/
* NoSquint: https://addons.mozilla.org/firefox/addon/nosquint/
There are some discussions about changing coming in Firefox 22 (I think) to address higher density displays like the Retina display. So perhaps there will be a built-in setting to address this in the future.

Can the size of the app icons be increased. The zoom feature just brings them all up and to the right, but you can't see all of the icons.

I am trying to increase the size of the icons for apps on an iPad, but don't see how. I looked in Universal Access but it is not there. The zoom feature just brings all the icons up and to one side.

No, what you've found is the only way to increase their size. You could try leaving feedback for Apple : http://www.apple.com/feedback/ipad.html

The font size in the iOS 7 slim bar is too small, can i increase it?

The font size in the iOS 7 slim bar is too small (clock, battery status etc), can i increase it?

same complaint here
but under Accessability you can select Bold type. it helps a little to make it more readable, but it's surprising that Apple's built-in apps, like Weather, do not use Dynamic font size font and icons are way too faint and small now.
Apple sticks to all or nothing too often and then markets the heck out if it to brainwash people into thinking it's better.
Ive's sense of stripped down asthetics gets in the way of actual usability too often. hope someone steps in before the iphone is reduced to 1 softbutton that just does whatever apple wants it to do regardless of what the customer needs to accomplish...

I have iphone 4s and just bought an ebook for ibook, trouble is the font is so tiny I can't read it and the font sizer is not working? Please help!

Hi, I have the iphone 4s and just bought an ebook for ibook, trouble is the font is so tiny I can't read it and the font sizer is not working? Please help!

Hello Glittergirl68,
Thank you for using Apple Support Communities.
It sounds like the function to reseize the Font in an iBook is not functioning properly.
I recommend a few things here. First close all the apps that are running in the background:
Double-click the Home button.
Swipe left or right until you have located the app you wish to close.
Swipe the app up to close it.
From: iOS: Force an app to close
http://support.apple.com/kb/ht5137
When you have done that, restart the phone, and try again.
If the issue persists, I would follow these steps from the article:
iOS: Troubleshooting apps purchased from the App Store
http://support.apple.com/kb/TS1702
2. Check for app updates
You can setup apps to update automatically in Settings > iTunes & App Store, but make sure that your apps are up to date:
Open the App Store and tap Updates. If updates are available, tap Update All.
If prompted, enter your iTunes Store account information. App Store will then download and install the app updates.
Note: Some apps may require a Wi-Fi connection to update.
3. Install another app from the App Store
If none of your user-installed apps will launch, there could be an issue with Apple ID authorization. Download and install an app that isn't already installed on your device to reset this information. You can also remove an app from your iOS device and download it again from the App Store or sync the app from your computer.Note: If you have installed apps using multiple Apple ID accounts, you may need to perform this step for each account.
4. Restart the app
If the issue affects only a single app, try closing just that app.
5. Restart your device
Turn the device off and on.
6. Reinstall the affected app
Remove the app from your device and reinstall it:
Tap and hold any app icon on the Home Screen until the icons start to wiggle and show a small "x" in the top-right corner of the app.
Tap the "x" in the corner of the app you want to delete.
Tap Delete to remove the app and all of its data from your device.
Press the Home button.
Go to the App Store.
Search for the app and then download it again.
All the very best,
Sterling

When I am on Firefox, my Netzero email page suddenly dropped to very small print. AOL OK. How do I increase size of the print so I can read the email?

I was using Firefox to read my Netzero email. The print suddenly dropped down to very small and I have difficulty reading the email. Netzero said to oper Mozilla Firefox, click "tools", click "options", and click "content" to change the font to a bigger size. But when I clicked the brown "Firefox" button on the Firefox page, I do not see the buttons Netzero told me to click. Can you tell me what they are referring to or just tell me how to increase the size of the font when I am reading email on Netzero. AOL email font size was not affected when I clicked AOL to read the email there.

See this and reset the zoom level there: <br />
https://support.mozilla.com/en-US/kb/Page+Zoom

Why can't Max Size of Post Data be increased?

We need to do a CFFILE upload of 1 – 3 GB videos and are having troubles.
(I know this is crazy, but FTP, network mapped drives, etc. aren’t going to leave an audit trail like an HTML form will for when people have to upload/update/delete bus incident videos.)
I can't increase the Max size of post data to even 2048MB without people getting "500" errors who are trying to upload small gifs or pdfs. If I move it above 2047MB, no one can upload anything.
Our setup:
CF Enterprise 8.0.1 with Hot Fix 2
2 - Win Servers 2003 R2 Enterprise x64 using replication, load balancing, and MS virtual machine.
CF is clustered so the Java class paths begin with
C:/JRun4/servers/HSWSD0C1O/cfusion.ear/cfusion.war/WEB-INF/...
CF Admin settings:
Max size of post data = 2047MB
Request throttle threshold = 4MB
Request Throttle Memory = 3072MB
Setting of 10 simultaneous requests.
Restarted CF services after Hotfix 2 install.
On the Application.cfm page I put
applicationtimeout="#CreateTimeSpan(0,4,0,0)#"
Basic code for uploading:

   <cffile action="upload"
      filefield="file"
      destination="#fileDirectory#"
      nameconflict="error"
      result="uploadResult">
This code works for small files IF I don't raise the max size of post data above 2047MB, which means we'll never get those videos up.
I've been fighting with this for weeks. Any ideas?
Thanks!

First thought is that Web Servers can impose their own upload throttles. You should check the documentation of your web server as well.
Secondly
I know this is crazy, but FTP, network mapped drives, etc. aren’t going
to leave an audit trail like an HTML form will for when people have to
upload/update/delete bus incident videos
What wouldn't FTP leave an audit trail? FTP communication can leave just as much, if not more, of an audit trail as HTTP communications.
Network mapped drives, I'm not so sure about, but I imagine there are ways to audit these as well. But then if you can use network mapped drives, you must be working with a well defined set of users all of which belong to a well defined network domain.
P.S. Also make sure that the max post size limits fit inside the overall limits of jvm memory. Trying to upload a file larger then the memory it can fit in sounds like a likely source of problems.

Can I increase size of Note Icon?

Similar Messages

Maybe you are looking for