Can I install 1333 MHz DDR3 RAM in my Macbook Pro?

I have a 2010 MacBook Pro and I want to upgrade to 8 GB of RAM. I found 1333 MHz RAM for cheaper than I could find the 1066MHz RAM that the computer is spec'ed for. Will the RAM work in my computer?

You can however I would not advise this option. It will seem to work for a time and then a periodic kernel panic.
A kernel panic is an action taken by an operating system upon detecting an internal fatal error from which it cannot safely recover.

Similar Messages

  • Can I install PC3-8500 DDR3 RAM in my Macbook Pro Mid-2012?

    I have two 4GB sticks of PC3-8500 DDR3 memory which I bought some time ago for a Mac Mini I had. Can I safely install it in the 13-inch Macbook Pro model I just bought? According to this Apple support article (http://support.apple.com/kb/HT1270?viewlocale=en_US#link1), this Macbook only supports PC3-12800.

    That's way too slow.  Memory's like under $100 for 16GB.  If you're dead set on 8 (not much of an upgrade), it's even less.  Buy some Corsair memory from Newegg or Amazon.  Works great.  Go for the Vengeance type and it'll work fine..

  • Can I install one 8 GB ram in a MacBook Pro (13-inch, Early 2011).

    Can I install one 8 GB ram in a MacBook Pro (13-inch, Early 2011).  The other slot is not working, I have only one slot that works. It is stated in this link http://support.apple.com/kb/HT1270#link1 , that the maximum memory is 8 GB where every slot slot has 4 Gb.  Is there any problem if i install only one 8 Gb ram in the working slot ?

    You should be able to do that.
    Maximum Memory
    16 GB (Actual) 8 GB (Apple)
    Memory Slots
    2 - 204-pin PC-10600 (1333 MHz) DDR3 SO-DIMM
    Understand that there is no guarantee it will work, but based on the above it should work for you.

  • How can I install Windows 8.1 Enterprise on my Macbook Pro  With BootCamp?

    How Can I Install Windows 8.1 Enterprise on my MacBook Pro?

    Hi Armin.S,
    I apologize, I'm a bit unclear on the exact nature of your question. If you are asking about the system requirements for running various versions of Windows under Bootcamp, or just more generally how to set up Bootcamp on your Mac, you may find the following articles/pages helpful:
    Boot Camp: System requirements for Microsoft Windows operating systems
    http://support.apple.com/kb/HT5634
    Mac Basics: Using Windows on your Mac with Boot Camp
    http://support.apple.com/kb/HT1461
    Apple - Boot Camp Support
    https://www.apple.com/support/bootcamp/
    Regards,
    - Brenden

  • I can't install adobe flash player update on my macbook pro. Goes to " Device" lather then download

    I can't install adobe flash player update to my macbook pro. Download to " device" lather then " download" When I click device for Adobe flash player, it won't finish installing. I am so done with this update. When I watch youtube, keep popping up " out to date flash player message . Please help me…...

      1. Save downloaded files to "Downloads" folder.
          Safari > Preferences > General
          Save downloaded files to:
          Select "Downloads".
    2. System Preferences >  Flash Player > Advanced >  Delete  All
        Press the "Delete All" button.
        Install Adobe Flash Player.
        http://get.adobe.com/flashplayer/
       Download it first.
       The next step is important.
       Click Safari in the menubar and select “Quit Safari”.
         Follow the prompts and install the Flash Player.

  • I can't install OS X mountain Lion to my macbook pro. It says when I'm trying to choose the disk, (This disk is used for time machine backups'. What can I do about it? thanks!

    I can't install OS X mountain Lion to my macbook pro. It says when I'm trying to choose the disk, (This disk is used for time machine backups'. What can I do about it? thanks!

    From the Finder's Go menu, choose Computer:
    Double-click your hard disk icon. It is usually named "Macintosh HD":
    Look for this folder:
    Drag it to the Trash.

  • Can I install window 7 enterprise 32 bit on MacBook Pro

    I have installed window 7 enterprise 32 bit on my MacBook Pro but it appears no software drivers such as Bluethoot USB Bost Controller, Enternet Controller, FaceTIme HD Camera (Built-in), Network Controller...etc. Then I tried to download Boot Camp Support Software 4 but it did not work.
    So, can i install window 7 enterprise 32 bit on Mac? How to solve this problem?
    Thanks!

    You don't say what year/version Macbook Pro you have. Newer Macbook Pros only support 64 bit Windows. See the tables here to see which Windows your computer supports. http://support.apple.com/kb/HT5634
    There are several reasons you should use 64 bit Windows on a newer Macbook Pro:
    Your computer is 64 bit
    32 bit Windows can only use about 3.5 GB of your installed ram
    32 bit programs run in 64 bit Windows
    There is no reason to use 32 bit Windows in a modern Macbook Pro.

  • Can I install an additional hard drive to my Macbook Pro? (2 Hard drives)

    I was wondering whether I could install a second hard drive to my 2011 Macbook Pro (2.0 GHz, 500GB HD 4GB Ram) making a total 1TB hard drive space?

    There are third party solutions out there, however be warned they will most likely void any current warranty - as it involves removing your optical drive.   I don't have details on them myself, but when my apple care expires I might consider that on a Late 09 model and push it to dual SSD's

  • How can I install epson stylus nx625 driver on my Macbook Pro?

    I've spent a frustrating few hours today going back and forth between Apple tech support and Epson tech support and still do not have a solution to what should be a simple problem.  I got a new MacBook Pro as a work computer and want to install my home printer on it so that I can print when working from home.  The printer is an Epson Stylus NX 625 all in one.
    The directions on Epson's website indicate that the only way to install is use the "Software Update" function by going to the Apple icon on the upper left corner.  When doing this, the system looks for an update and finds nothing.  Printer is connected to the MacBook  via usb cable and is also on my wireless network.  I called Apple tech support and they said they don't have a driver for this Epson device and I should contact Epson.  I called Epson tech support and they say that they don't even have the driver for this device on their website because "Apple has signed off on ownership of this driver and only they can deliver this to you via their software update".   Can anyone help?
    I am running Mountain Lion, OS X 10.8.1
    Thanks for any assistance provided.

    Patrickdom wrote:
    The directions on Epson's website indicate that the only way to install is use the "Software Update" function by going to the Apple icon on the upper left corner.
    I am running Mountain Lion, OS X 10.8.1
    Thanks for any assistance provided.
    Epson Stylus NX 625 drivers for Mountain Lion.

  • How can I install my CS2 upgrade to my new macbook pro?

    Help! I have a new Macbook pro and an old upgrade of CS2 photoshop (upgraded from Photoshop 6). I bought these two for a PC and was told in the Mac shop that I could run them on my fancy new machine..........apparently not, it won't install classic photoshop 6 as presumably it's too old. I also have CS2 Indesign but can't find the install button to press for that either......Am I screwed? I can't afford new programmes.

    CS2 is the oldest version that can be upgraded to CS5. You may want to do that now before you lose the opportunity when CS6 comes out. You can upgrade and crossgrade to CS5 for Mac.
    Another thought...
    I run CS2 for Windows on Linux through Wine. It works fine. You could probably install Wine on Mac and do the same.
    The salespeople might have been referring to running your Windows software on Mac with a virtual machine... with the help of such apps as VMWare Fusion or Parallels. These let you run Windows on top of Mac OS X without rebooting into a Windows partition. See the marketing line: "It Runs Windows Too".

  • How can I install software of a CD on my MacBook Pro 13' ?

    I have bought software (SPSS, adobe, office) to install on my Macbrook Pro 13'.
    However, the software has been delivered in CD format.
    How can I install this software on my macbook?
    Do I have to copy the CD to a USB?
    Already thanks for your tips!
    Fleur

    Fleur,
    you could borrow or buy an external CD/DVD drive with a USB connector to install the software from your CD to your MacBook Pro.

  • Can i install a Medcin CD program into my Macbook Pro Laptop?, can i install a Medcin CD program into my Macbook Pro Laptop?

    Can i install any programs to my MacBook Pro without my Laptop getting messed up?

    what do you mean by "without my Laptop getting messed up".  Messed up in what way?  I have several programs installed on my MacBook Pro and it's not messed up.

  • HT1899 Can I install and run Windows XP on my MacBook Pro 13in. OS X 10.7.5?  If so, where can I buy it?

    I'm planning to use my macbook pro to record music, but some of the programs I will be using are only compatible with Windows.  I was told that it was possible to install & run windows XP onto my macbook pro by using Bootcamp.  I just don't know how fullproof or problematic this might be, or if it has even been successfully attempted yet.  Please help!
    Thx, K

    You can use XP with 10.7.x by installing XP when the Mac is operating from OS X 10.6.8. It can then be up graded to 10.7.x. Below I have reproduced the "Hatter " method instructions that I have used successfully. If your MBP cannot boot from and install 10.6.8 then it is a no go situation.
    Upgrade 10.6.8 to 10.7 or 10.8
    Use a maintenance utility like Yasu or Cocktail to prepare existing internal Mac OSX  HDD.
    Clone the internal Mac partition to an external HDD with SuperDuper or Carbon Copy Cloner.
    Restart from the cloned external HDD and select it as the startup volume via System Preferences / Startup Disk.
    Install 10.7 or 10.8 on the cloned external HDD replacing 10.6.8 or 10.7.x.
    Install 10.7.x or 10.8.x updates on the external HDD
    Restart the updated 10.7.x or 10.8.x  external HDD and test and adjust the preferences if needed.
    When satisfied, clone only  the 10.7.x or 10.8.x  external HDD back to the existing internal Mac HDD replacing 10.6.8 or 10.7.x  but don't include the recovery partition.
    The Boot Camp partition will not be altered as to drive id which appeared to cause problems for a few people.
    The recovery partition will be on the ext HDD and can be used for trouble shooting. A more convenient way to have the recovery/reinstallation environment is to create a Lion install USB thumb drive.

  • Can i install a multi-gesture touchpad in my macbook pro

    Can I upgrade my touchpad to a multi gesture touchpad on my macbook pro?

    What you have is what you get.  That hardware cannot be altered on a MBP.
    Ciao.

  • Can I install windows xp via bootcamp onto my macbook pro 15"? The XP in question is an "OEM" disk but it is NOT branded to any computer brand i.e Dell. Thanks.

    Will XP be ok to use via bootcamp?
    Does it matter if it's OEM?

    Technically it's Lion Boot Camp Assistant doesn't support XP, it is after all 11 years old, and is a booger Microsoft is even trying to flick off with hardly much success.
    http://www.itworld.com/windows/266924/clock-ticking-xp-time-start-os-migration
    The hardware in question, almost invariably will run Windows XP OK. There might even be XP video drivers for this laptop, etc. but not the easy collection of drivers for XP specifically for this Macbook. The OP would  have to track down the drivers manually. But it is possible to shrink the Mac HD volume, boot a Windows XP disk directly and have it format and install on the free space created. But it's a guess how much of a rabbit hole it is to track down XP specific drivers for this brand new hardware.
    But that's the alternative to "Buy Windows 7". Of course, you can run XP in a Virtual Machine, on Lion, however.

Maybe you are looking for