Can I Place an Image in a Table Cell?

I have a table in ID CS3. Can I place an image in one, or more than one, table cell? I see a place to manage fills, but don't see an option for images.

I am working on a calendar project and variously want to: (1) put an individual image in a box, (2) put a continuous image behind more than one box like two dates side by side, (3) put a continuous image in multiple boxes that although they constitute a multiple of boxes, might not be rectangular, (4) put text over any or all of the preceeding.
I can places gridlines on the page, create text and image boxes for for each date, and the join the images boxes as necessary. Then for the box lines I could use an empty table or I could draw them individually and group them. This would get me what I want. I just thought this might be done easier with a table.

Similar Messages

How to insert an in-line image into a table cell using Pages on OS X?

How can I insert an image into a table cell using Pages (OS X) without it becoming the cell background? I want it to be a regular in-line image, but can't figure out how to do this for the life of me. Thanks!

Welcome to Discussions.
To insert an image into a cell, select the cell, then go to the Graphics Inspector and from the Fill drop down choose Image Fill and then select then image you want. You can now select from a new drop down how you want the image to fit.
Walt

Can you place an image in a div tag and then add type over top of it?

I told someone in class lastweek that I wanted to be able to
place type over an image. They said you can just add the image into
the div tag as a background image, which will allow you to then
type over it if you like. How is this done? I have tried and
failed. I have an image that is 200x590 going down the left side of
my page. I want to run type over it, and keep the image consistent
on every page, but change the header and type. I've seen this in
several sites. How do you do this with the div tag box model method
of building a page. Can I insert an image into the div and then run
type over it. What does the code look like?

Here's an example of using a css and a background image to a
table cell...
sample principle for a div
#div {styles go here{
http://tinyurl.com/yqeptp
You may also want to go through the beginner css tutorials at
the Adobe
site:
http://www.adobe.com/devnet/dreamweaver/css.html
(pay attention to the ones
by Adrian), beginner moving onto to creating full css
layouts.
Hope this helps :-)
Nadia
Adobe® Community Expert : Dreamweaver
CSS Templates |Tutorials |SEO Articles
http://www.DreamweaverResources.com
~ Customisation Service Available ~
http://www.csstemplates.com.au
Forum Posting Guidelines:
http://www.adobe.com/support/forums/guidelines.html
>I told someone in class lastweek that I wanted to be able
to place type
>over an
> image. They said you can just add the image into the div
tag as a
> background
> image, which will allow you to then type over it if you
like. How is this
> done?
> I have tried and failed. I have an image that is 200x590
going down the
> left
> side of my page. I want to run type over it, and keep
the image consistent
> on
> every page, but change the header and type. I've seen
this in several
> sites.
> How do you do this with the div tag box model method of
building a page.
> Can I
> insert an image into the div and then run type over it.
What does the code
> look
> like?
>

The HOLE filter. Can I place an image behind the hole created in another image?

The HOLE filter. Can I place an image behind the hole created in another image?

Here's an example of the hole filter composited against a background image. This filter will run in the Pixel Bender Toolkit.
<languageVersion : 1.0;>
kernel HoleCompositedAgainstBackground
<
namespace: "pb::forums";
     vendor: "spotted chicken";
    version: 1;
description: "Hole filter composited against a background image. The original 'Hole' filter was written by Jerrynet. See the Pixel Bender Exchange, <http://www.adobe.com/cfusion/exchange/index.cfm?event=extensionDetail&extid=1550519#> for more information.";
>
//< namespace : "net.Jerry.PixelBender";
// vendor : "[email protected]";
// version : 4;
// description : "A Hole Distortion Effect.";
//>
parameter float radius
<
     minValue:    float(0.0);
     maxValue: float(1000.0);
defaultValue: float(100.0);
aeDisplayName: "Radius";
>;
parameter float2 center
<
     minValue:   float2(-800,-800.0);
     maxValue: float2(1600.0,1600.0);
defaultValue:   float2(120.0,120.0);
aeDisplayName: "Center";
>;
parameter float EdgeSmooth
<
     minValue: float(0.0);
     maxValue: float(3.0);
defaultValue: float(1.0);
aeDisplayName: "Edge smoothing";
>;
input image4 src;
input image4 background;
output pixel4 dst;
void
evaluatePixel()
float2 Pos_from_cen = outCoord() - center;
float p_length = length(Pos_from_cen);
float fun = (radius*radius)/abs(p_length);
float m = fun/sqrt(Pos_from_cen[0]*Pos_from_cen[0] + Pos_from_cen[1]*Pos_from_cen[1]);
float2 pp = -float2(m*Pos_from_cen[0], m*Pos_from_cen[1]) + outCoord();
pixel4 final = sampleLinear(src,pp);
if (p_length <= (radius+EdgeSmooth/2.0))
//smooth the circle edge
if (p_length >= (radius-EdgeSmooth/2.0))
final *= (p_length-radius+EdgeSmooth/2.0)/EdgeSmooth;
else
final = sampleNearest(background, center + Pos_from_cen);
dst = final;

Scaling of images in a table cell

Hi,
I have an issue aboute the scaling of images in a table cell. The table layout is fixed but the images can vary. I tried to transform the images but every time the transformation matrix has a scaling != 1.0 the function results in an error.
The following code is used.
PageItem pi = myCell.getNthChildPageItem(0);
TransformationMatrix[] matrix = pi.transformValuesOf(kCoordinateSpacesInnerCoordinates.value);
TransformationMatrix scalemat = matrix[0].scaleMatrix(OptArg.makeDouble(0.5), OptArg.makeDouble(0.5));
Unit[] matValues = UnitUtils.createDouble(scalemat.getMatrixValues());
pi.transform(
enums.kCoordinateSpacesInnerCoordinates.value,
VariableTypeUtils.createEnumeration(enums.kAnchorPointCenterAnchor.value),
VariableTypeUtils.createUnitList(matValues),
OptArg.makeVariableType(VariableTypeUtils.createEnumeration( enums.kMatrixContentScaleValues.value ) ),
OptArg.noBoolean()
Any suggestions?
Regards,
tom

Hi!
You may try to vary the settings for property "type"
navigation
function
reporting
result
If this does not help to solve your issue open a ticket at SAP Support.
There are several UIElements which show such a behaviour and you have no (documented) chance to change this.
Hope this helps.
Regards,
Volker

How can I recover BFILE images from a table?

I`m a Spanish student, so excuse me for my poor english.
I have used LOB objects to insert images into some tables of a DataBase. However, I have tried to recover the inserted images to put those into a Developer 6 Form, and I haven4t done it.
?Have I need an specific procedure?
?Is There some option in Developer 6 to do it easily?
Please, help me.

If you have access to a PC I believe - if memory serves me correctly - that the free download SubRip can rip the highlight overlays back to graphics files from the Menu VOBs
There is a subtitle ripping program for Mac - D-Subtitler - which may do the same job but I have never found it to be as good at ripping stuff as SubRip.
I guess the only other way is if they are not too complex is to recreate the overlays in Photoshop using frame grabs for reference?

How can we place an image in already created inline graphic frame?

Hi,
AIM::
To place an image in the inline graphic frame.
OBSERVATION::
As i have analysed the snippet Runner,i came to know that it allows to load the placegun with the file(in my case image). but in order to place it,we need to click on the document..and then the image is placed at (0,0) of the page(I suppose Indesign does it automatically).
what is needed,is to place image in already created inline graphic frame. i have created a inline graphic frame at some position in the story,but now i required to place image in this created frame.

I have the same problem. Can you give me a short code sample for that.
I have an image and want to place it in the currently selected frame...

Can I place an image in the Note section of Contact book . I use a MacBook Pro with Yosemite 10.10 . I am NOT talking about using an image to identify the contact, just an image that contains some information relevant to the contact. I have tr

I want to place an image in the Note section of my Contact book . I use a MacBook Pro with Yosemite 10.10 . I am NOT talking about using an image to identify the contact, just an image that contains some information relevant to the contact. I have tried copying and pasting, dragging and dropping.

From reading Vista forums support for SSD is one of the things Vista SP2 and Windows 7 hope (need) to improve upon. I was in a similar discussion once befoe on SSDs:
http://discussions.apple.com/thread.jspa?messageID=8482110
http://news.cnet.com/8301-13924_3-10026010-64.html
http://www.intel.com/design/flash/nand/mainstream/index.htm
http://www.google.com/search?hl=en&rls=com.microsoft%3Aen-US&q=IntelSSDVista
I don't think it is EFI issue, but with XP and drivers, lack, and wonder if you can try with Vista?
http://arstechnica.com/news.ars/post/20080908-intel-tosses-hat-into-ssd-ring-wit h-80gb-launch.html
That won't solve performance issues, but should work.
http://www.reghardware.co.uk/2008/07/22/sandiskssd_vistabeef/
"My guess is that [Samsung and Microsoft] are maybe working on the OS recognizing an SSD with a 4K-byte sector size instead of a hard disk drive with a 512-byte sector size," Wong said.
Sun is already working with Samsung to bulk up SSD support on the ZFS (Zettabyte File System), which is included in the Solaris OS, and will also be supported in Apple's upcoming Mac OS X 10.6, codenamed Snow Leopard. Sun is adding capabilities to boost the durability and performance of SSDs on ZFS-based operating systems. For example, Sun may add defragmentation capabilities for SSDs, which organizes data in a particular order to enable quicker data access.
SSDs were not considered ideal for defragmentation because of limited read-and-write capabilities, Wong said. However, Samsung and Sun in July jointly announced an 8G-byte SSD that bumped up durability from 100,000 read-and-write cycles to 500,000. That brings defragmentation in SSDs closer to reality, which could improve its caching and provide quicker access to data. Sun plans to put SSDs into storage products later this year.
http://www.itworld.com/operating-systems/54115/samsung-microsoft-talks-speed-ssd s-vista

How can I place an image in an Report without it getting pixelated

Hello,
I am creating a report from my program using NIReport. In my report, I have graphs and images that are being placed in the report. My current method is using a bitmap to take a screenshot of the current view of a control, then using that bitmap to create a JPEG file and appending that file to the report. However, the graphs and images are very fuzzy and pixelated. Is there another way of adding a graph or image to the report?

The nirconvertsample.cws example seems to have images in the table for NIReport. You can dig through that example code to see how they do it.
Mark P.
Applications Engineer
National Instruments
www.ni.com/support

Double spreads - can I place an image across two pages in facing page mode?

Hi, I'm just getting into Pages to be able to create custom wedding album designs easily (I use Aperture). I'd really like to be able to place an image across two facing pages and I noticed that there is a 'facing page' mode, but this looks like it only applies to the view.
I tried laying an image across two 10x13 inch pages, but of course this doesn't work. I also tried to insert a 10x26 inch page as an alternative so that I can treat it as a double page. However, when I try to do this, every page resets to that size.
Is there a way of creating two page sizes (one normal, the other double width) in the same document so I can do this, or is there a way of spreading an image across two facing pages?
Thanks

brown,
You've bumped into one of Pages' limitations -- it won't allow one image across a spread. I've heard rumors of people kludging it by cutting the image in half, and putting each half on the spread pages.
-Dennis

How can I place an image hot spot on top of a ap div with an image in the background of the ap div?

It won't let me

Right. You can't make an image map out of a background. You must insert the image directly into the page (HTML markup). Then apply hotspot tools to the image.
HTML Image Map
http://w3schools.com/html/tryit.asp?filename=tryhtml_areamap
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
http://alt-web.com/
http://twitter.com/altweb

How can i place a Image

Hello Friends,
I want to create a image project using JSP & HTML (NWDS) and want to place the image In the portal By iview creating from par file..,plz help me any one step by step procedure or
If u have any code plz mail to my id : [email protected]
Thanks in advance
Bye
<b></b>

This question is better answered in the portal environament.
Regards,
Benny

How can i embed an image within a table

how can i embed an image within a single column of a table

noticed this question elsewhere and have seen that the trick is to copy and paste not drag & drop
incase anybody else was wondering

Placing text beside image in a table cell?

I'm creating business cards (using a Printworks template), and I want to place text to the right of the inserted picture.
I've copied and pasted the jpg fine onto the left side of the cell, yet when I try to type text, the cursor only lets me begin typing at the bottom right side of the photo, not up at the top right side, where I want the info to start.
Further, when I try to insert a Text Box into the cell, it won't go inside.
So, my question: *How do I get image and text together inside a table cell?*

I made an ultimate test.
I grouped a jpeg picture and a shape in which I inserted a piece of text. You may see it on the screenshot.
I inserting the group in the cell hoping that the group will be correctly displayed.
Nada, only the picture appears.
If I select the object embedded in the cell, copy it, paste it in an other location, I may ungroup it but the now separated shape no longer contains the original text
Yvan KOENIG (VALLAURIS, France) lundi 7 juin 2010 17:55:18

Problem with images inside of table cells

I've run into a problem on this web page:
http://www.solidrocknet.org/index2.html
The the background of the table cells which contain an image
is showing
through in the form of a strip at the bottom of the cell. You
can see
this as a black strip in the cells which contain the logo
graphic,
centerpiece photo, and the photo strip and as a blue strip
under the 4
separate photos on the bottom.
These problems are appearing in Firefox. It almost looks
correct in
IE6/7 except that the blue strip appears under the bottom
photos.
Can anyone see what I am doing wrong?

The best practice is to include -
a img { border:none; }
in your CSS so that any image inside an anchor tag is
prevented from having
the border.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"K0rrupt" <[email protected]> wrote in
message
news:f5i5fc$bhp$[email protected]..
> sometimes browsers like to display a blue lines around
pictures. So as
> good practice you should add it.
>

Can I Place an Image in a Table Cell?

Similar Messages

Maybe you are looking for