Can I report on massage Failed to wake up the device

I have a bundle to wakeup machines for patch and updates. I would like to be able to report on the failing ones. when they fail I see a message under each failed workstaion that says "Failed to wake up the device". I need to track down these machines to see why they do not wake up.

Originally Posted by mcdonalj
Hello there...
I do the same type of thing and was looking for the same info. I need to find out which computers are failing to WOL. Did you ever find a way to do this?
kind of...... We created a vb script that reads a txt file exported from zen of mac addesses, IPs and machine names. It does a ping, wakeup if not active. a modified script runs again in a few hours that just does a ping. if machines do not respond back we look into why.
We exclude laptops from this and do that in a seperate script. this also alows us to keep tabs on what users NEVER take thier laptops home with them. We we can wake them up evernight then they obviously do not need a laptop ;)

Similar Messages

  • Can you report on aggregares? If so whats the scenario?

    Can you report on aggregares? If so whats the scenario?

    Here is a good place to start looking:  http://tinyurl.com/6k8gdqm

  • Failed to authenticate with the device at ip.ip.ip.ip using TELNET

    Hi!
    I can no longer use CCA :-)
    I tried everything, but when I enter user and password after waiting a few tens of seconds I get the following error window: "Failed to authenticate with the device at ip.ip.ip.ip using TELNET. TELNET access is required for access to voice configuration. Cannot continue. Exiting CCA."
    Given that I do not understand the need to use the 'telnet', I verified that UC500 was reachable from the PC via telnet. But CCA 2.2.5 don't work and I find no reason, even logging on to see go console error messages or anything else that turn me to the solution. Before removing CCA and back to 2.2.4, I see if I could solve the problem somehow.
    I tried to see what was going on the network with wireshark:
    Time          Source          Destination     Protocol     Info
    722.508214     pc.pc.pc.128     uc.uc.uc.1     TELNET     Telnet Data ... (the password in clear text!!!!)
    722.713551     uc.uc.uc.1     pc.pc.pc.128     TCP     telnet > xs-openstorage [ACK] Seq=80 Ack=37 Win=4092 Len=0
    722.713606     pc.pc.pc.128     uc.uc.uc.1     TELNET     Telnet Data ... (a '/r/n' after send user pwd on previus pkt)
    722.911528     uc.uc.uc.1     pc.pc.pc.128     TCP     telnet > xs-openstorage [ACK] Seq=80 Ack=39 Win=4090 Len=0
    724.608892     pc.pc.pc.128     uc.uc.uc.1     TCP     xs-openstorage > telnet [FIN, ACK] Seq=39 Ack=80 Win=65456 Len=0
    724.611192     uc.uc.uc.1     pc.pc.pc.128     TCP     telnet > xs-openstorage [ACK] Seq=80 Ack=40 Win=4090 Len=0
    724.721538     uc.uc.uc.1     pc.pc.pc.128     TELNET     Telnet Data ... (a '/r/n')
    724.721589     pc.pc.pc.128     uc.uc.uc.1     TCP     xs-openstorage > telnet [RST, ACK] Seq=40 Ack=82 Win=0 Len=0
    ...but do not understand why the PC ends the connection!
    NB: Obviously the username and password are correct and the UC does not report login errors.
    Can anyone give me a hint? 1k thanks
    73,
    Arturo

    Most files are 0 bytes long, only Application_Log report some output:
    ++: DEBUG:  : User Preference Settings App Version=2.2 (5)
    ++: DEBUG:  : Current App Version=2.2 (5)
    ++: DEBUG:  : *** Site name: DIM - Lab
    ++: DEBUG:  : *** Remove site from history list: DIM - Lab
    ++: DEBUG:  : Last used connection string: http://DIM+-+Lab:80/
    ++: DEBUG:  : Filtered connection string: DIM+-+Lab
    ++: DEBUG:  : SiteName : DIM+-+Lab DecodedName: DIM - Lab
    ++: DEBUG:  : DIM - Lab is customer site name: true
    ++: DEBUG:  : Set connection string to: ---.---.---.---
    ++: DEBUG:  : Filtered connection string: DIM+-+Lab
    ++: DEBUG:  : Duration for [upd Mirror<--Device() @ com.cisco.cpnm.features.defn.connect.ConnectDialogTask] = [1265] msec.
    ++: DEBUG:  : *** Site name: DIM - Lab
    ++: DEBUG:  : *** Remove site from history list: DIM - Lab
    ++: DEBUG:  : Last used connection string: http://DIM+-+Lab:80/
    ++: DEBUG:  : Filtered connection string: DIM+-+Lab
    ++: DEBUG:  : SiteName : DIM+-+Lab DecodedName: DIM - Lab
    ++: DEBUG:  : DIM - Lab is customer site name: true
    ++: DEBUG:  : Set connection string to: ---.---.---.---
    ++: DEBUG:  : Filtered connection string: DIM+-+Lab
    ++: DEBUG:  : Filtered connection string: DIM+-+Lab
    ++: DEBUG:  : Filtered connection string: DIM+-+Lab
    ++: DEBUG:  : WDTask::setHierarchy .TroubleshootingLogsTask
    ++: DEBUG:  : Duration for [create() @ com.cisco.cpnm.features.defn.logs.TroubleshootingLogsTask] = [78] msec.
    NB: I understand that the program tries to connect using something invented name of the site?
    I create another site with a valid DNS name and I try to connect... Last log lines are:
    ++: DEBUG:  : conn string: HTTP://valid.name.tld:80/
    ++: DEBUG:  : ConnectionMediator:connect() : http://valid.name.tld:80/
    ++: DEBUG:  : URL After Decoding :http://valid.name.tld:80/
    ++: DEBUG:  : ConnectionMediator:isFederation() : http://valid.name.tld:80/
    ++: DEBUG:  : initAppMode():http://valid.name.tld:80/
    ++: DEBUG:  : ConnectionMediator:isFederation() : http://valid.name.tld:80/
    ++: DEBUG:  : initAppWithConnection():http://valid.name.tld:80/
    ++: DEBUG:  : Found Module For device type : UC540W-BRI-K9
    ++: DEBUG:  : *** RouterInfo.ShVer.Fields=[UC540W-BRI-K9, cme, 1 day  23 hours  49 minutes, flash:uc500-advipservicesk9-mz.150-1.XA2, , 15.0(1)XA2, N, N, , UC500-ADVIPSERVICESK9-M, , 1 ]
    ++: DEBUG:  : AuthGrp@1978622: getAuthCreds() called for: telnet://uc.uc.uc.1:23; realm: null
    ++: DEBUG:  : AuthGrp@1978622: getAuthCreds() called for: telnet://uc.uc.uc.1:23; realm: null
    ++: DEBUG:  : AuthGrp@1978622: getAuthCreds() called for: telnet://uc.uc.uc.1:23; realm: null
    73

  • Keep getting error message "Failed to connect to the device"  when......

    Hi,
    I keep getting the following message:
    (this is an icon in this area of a camera sitting on pictures)
    Failed to connect to the device.
    -Check the I/F cable connection between the device and your computer
    -Please turn off the device once, and then turn ON the device again.
    Then try again.
    [MTW005] OK (this is highlighted like you can click on it, but nothing happens when you click on it)
    I don't have this device even plugged in because I haven't a need for it. Yet the message keep showing up. I thought I would out smart the error message and plugged in the device (ScanDisk 4 in 1 (media card) reader. But I was the one out smarted. Nothing changed. I still have the error message, even after restarting the computer or shutting down and turning back on. All I can do with the message is slide it the edges of my screen display so it isn't in the way. Help, how do I get rid of this problem. This has happened before and then one day the error message disappears for awhile to only come back yesterday to drive me nuts (short drive by the way).

    Hello, 
    Try going to Macintosh HD > Applications > Image Capture > Image Capture menu > Preferences... > General tab > "When a camera is connected, open: " set it to 'iPhoto' or 'No Application'.
    regards
    mrtotes

  • I bought a used iPhone and found him email iCloud does not affect me so how can I deleted this email in order to use the device freely and privacy

    I bought a used iPhone and found him email iCloud does not affect me so how can I deleted this email in order to use the device freely and privacy
    help me please

    You can't. Return the phone for a refund, if you can, because without the previous owner's Apple ID/Password, you will not be able to re-activate the phone. It will be useless to you.
    Apple can't/won't help you with this.

  • HT201441 where and how can i find his id to contact him if the device is not activated and idon't know how to riech him

    where and how can i find his id to contact him if the device is not activated and idon't know how to riech him

    i will have to agree with hasscoo90. we badly need help how to contact the owner of this phone. we do understand the purpose of activation lock. and this is why instead asking Apple or any other company that offers a service (if there is any) to remove the activation lock for us, help us provide any contact information of the owner of this serial number we have and we will inform them of exactly what to do so that we can already use this iphone.
    please help us. we really badly need your help.

  • E72 - The driver \Driver\WUDFRd failed to load for the device ROOT\SYSTEM\0001

    I have a problem with my ThinkCentre E72 (Windows 8).
    Suddenly, it shuts down with "shut-down" screen. Later, in my Event Viewer, I found the following System Warning:
    "The driver \Driver\WUDFRd failed to load for the device ROOT\SYSTEM\0001" where the source of problem is Kernel-PnP.
    Only thing that is plugged in my computer is mouse, keyboard and monitor.
    Many thanks,
    Matija

    Hi,
    PNP0A0A is not a default pnp ID, you need go to the manufacturer websites to find the ACPI driver, download and install it.
    Alex Zhao
    TechNet Community Support

  • Application launch failed. Ensure that the device screen is unlocked - after the phone update

    I have the following error "
    Error    1    Application launch failed. Ensure that the device screen is unlocked and device is developer unlocked. For details on developer unlock, visit http://go.microsoft.com/fwlink/?LinkId=195284.         0    0 
    I'm pretty sure it happened after the last update. I was able to use my phone as a dev one before
    and my account shows it as a registered device.
    The OS version is 7.10.8107.79.
    The steps that I tired
    -Registered again my phone with the registration tool
    -Check the issue with Zune auto-launcher (zune isn't syncing and the phone is connected)
    -Close and start everything again
    Other possible issues
    - Do I have to have sdk 7.1 to deploy?
    - Do I have to wait 24h for registration?

    You should be using SDK 7.1 anyway, so install that.
    After the update, the phone may have locked itself.  This may not be reflected in your AppHub account though.  Using the Developer Registration Tool, register the device, unregister it, then register it again.

  • PLEASE HELP. How can I make a Label in my application display the devices Serial Number?

    I need the label to display the users serial number. Thanks guy, you help alot i apresciate it

    Yes you can get the device id, try following stuff:
    NSString *uuid = nil;
    CFUUIDRef theUUID = CFUUIDCreate(kCFAllocatorDefault);
    if (theUUID) {
      uuid = NSMakeCollectable(CFUUIDCreateString(kCFAllocatorDefault, theUUID));
      [uuid autorelease];
      CFRelease(theUUID);
    Now create a label and set string uuid.
    UILabel* label = [[UILabel alloc] init];
    [label setText:uuid];
    [self.view addSubview: label];

  • HT1459 i can't find my shuffle serial number anywhere on the device

    can't find my shuffle serial number anywhere on the device

    Pepe2123,
    if you still have your MacBook Pro’s original box, its serial number will be on one of the stickers on the box. If you no longer have its original box, you can try contacting Apple directly since you’d registered it with Apple, or you can try contacting Best Buy direcly to see if they’d kept a record of exactly which MacBook Pro you’d purchased.

  • Is there any way I can get my lost iPhone online with iCloud. The device is either off or out of battery.

    lost my iphone. downloaded "find my iphone" to the phone from my mac using icloud. I was wondering if there is a way to turn the phone online from my computer. Since I don't have the phone, I can't set up the locator app to appear online.

    If you did not activate Find My iPhone on the device when you had it, you will not be able to track it. The Find My iPhone app has nothing to do with it. That is only for trying to track another iOS device with it. Log into www.icloud.com and if you cannot see the device, you did not have Find My iPhone activated. If you see the device, but it says offline, then it could either be powered off or the battery dead. There is nothing that you can do without the phone in your hand about activation. Did you have a passcode on the device? Did you send a lost/wipe command? Do you have iOS 7 on the device. If you had iOS 7, then the phone cannot be restored and activated without your Apple ID and password. The device would be worthless to the thief. Change all of your passwords for accounts that you had on the phone.

  • Why does my mac say "failed to connect to the device" when I try to print through airport express?

    So a little back ground.  I have a unibody 2 ghz core 2 duo running 10.5.8 and a mac book air running 10.7.5.  I set a airport express and added a new printer to both computers using bonjour.  My mac air has no problem connecting and printing but my unibody does.  The "failed to connect to device" message come up after I open print que for that printer and then utility.  It unibody sees the printer through bonjour and installs the printer but when asked to connect, nothing happens.  can anyone help please?

    If you updated from a previous version of OS X to 10.9 and had an older version of driver installed, then you can get this message. Sometimes a quick fix is to reset the printing system. Note that this action will remove all devices from the Printers & Scanners preference pane, but not the supporting drivers, so if you do have other printers or scanners on this Mac you will have to add them again.

  • How can i re download movies onto my iPad if the device 'is already associated with another apple id'?

    Every time I try to play a movie/tv show on my ipad that i've bought but haven't downloaded, a message comes up saying 'This device is already associated with an apple id, you can download past purchases on this device with just one apple id every 90 days. You cannot associate this devicethis device with a different apple id for 90 days'. I have no idea what this means so I will be eternally grateful if someone could help.

    Well I changed the email for the same account, however I used '.com' instead of '.co.uk' which obviously caused alot of complications. After about an hour on the phone this is all sorted out now and I am left with one apple id, but this is still happening. If this makes no sense to anyone I don't blame you as it took me a good half hour to get my own head round it.

  • HT4962 I have an Ipod Touch 2nd generation with version 4.2.1 IOS and it no longer seems to be recognized as a device when I plug into my computer. I want to update my sync settings but can't do this without being able to select the device. Any suggestion

    I have an Ipod touch 2nd generation with version 4.2.1 IOs and it is no longer recognized as a device when I plug into my computer. This means I can not change synch settings - any ideas on what I need to do ?

    See:
    iOS: Device not recognized in iTunes for Windows
    I would start with:
    Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
    or
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP

  • HT4864 my iCloud emails disappear on all my devices after about a week and I can't find where they have gone, none of the devices say to delete from server, I move my samsung note emails to trash after reading - no other accounts are deleted from other de

    My icloud email messages disappear on all my devices after about a week and I cannot locate them - not in archive on icloud.
    I use several devices to receive emails - imac, ipad, iphone and samsung galaxy note. I put all read emails to trash on samsung, ipad and iphone but keep on imac and wish to retain there for reference. All other accounts remain but icloud emails disappear. No devices say to delete from server. Can anyone please help?

    mazzaja wrote:
    I put all read emails to trash on samsung, ipad and iphone but keep on imac and wish to retain there for reference. All other accounts remain but icloud emails disappear. No devices say to delete from server.
    If this is your iCloud email account, whcn you delete an email from any of your devices, they are moved to the trash on all devices/computers, then the trash is automatically deleted after 30 days.  That's how IMAP accounts work.  You can't delete them from your device and keep it on the server because you are reading and deleting from the server itself.
    If you want to keep them on your Mac, you'll need to move them to a folder rather than deleting them.  When you do, they will be moved to the same folder on your other devices.

Maybe you are looking for

  • Supposed to be simple: XQuery issue mapping array of objects (duplicate)

    I've been having an issue having a web service return a repeating set of elements. The xsd seems correctly formatted with the right structure and maxOccurs set to ounbounded etc. This is the actual service: public RecArea[] getAllRecAreas() throws Ex

  • Airport express wont install

    i just bought a new macbook with the new santa rosa motherboard and chipset, etc. with my mac i decided to buy airport express but when i put in the disk it said that it could not install the software on my version on os x. someone help i need my net

  • Install issue with FlashBuilder 4.5

    HI.   I've tried to install FlashBuilder 4.5 on my vista PC.  It installed okay, but when I go to run it, it shows me the license agreement.  I can click OK, it brings up the FlashBuilder 4.5 logo page, then the license agreement reappears.  If I cli

  • AIR SDK 16.0.0.283 : iOS - IPA Size

    The new SDK seems to have added an extra 3.5MB on ipa (release) depending on the app. On the basic app that does nothing it adds 3.5MB, on one of our apps it added 7MB. Anybody else got a size increase?

  • Firefox crashes when launched

    Hello, Every time i try to launch firefox it crashes before a page loads, what can be done to fix this? Thanks Lee