Can I run 2 different domains with same name but on 2 different machines?

I am trying to setup 2 domains with same name (sharedcds1) on 2 different machines (Machine1 and Machine2).
          When I start the weblogic managed server 1 (sharedcds1managedserver1) on Machine2, it throws an error saying it has some conflicts with the managed server 1 running on Machine1. How did the managed server of one machine know about the other server. Can I run 2 different domains with same name but on 2 different machines?
          Here is the error in the log -
          <Jun 14, 2005 10:53:29 AM EDT> <Error> <Cluster> <BEA-000123> <Conflict start: You tried to bind an
          object under the name weblogic.transaction.coordinators.sharedcds1managedserver1 in the JNDI tree.
          The object from 4596206652609838848S:130.170.61.153:[9505,9505,-1,-1,9505,-1,-1,0,0]:sharedcds1:s
          haredcds1managedserver1 is non-clusterable, and you have tried to bind more than once from two or m
          ore servers. Such objects can only be deployed from one server.>
          <Jun 14, 2005 10:53:29 AM EDT> <Error> <Cluster> <BEA-000123> <Conflict start: You tried to bind an
          object under the name weblogic.transaction.coordinators.sharedcds1managedserver1 in the JNDI tree.
          The object from 8842351474821025197S:130.170.61.154:[9505,9505,-1,-1,9505,-1,-1,0,0]:sharedcds1:s
          haredcds1managedserver1 is non-clusterable, and you have tried to bind more than once from two or m
          ore servers. Such objects can only be deployed from one server.>
          Thanks
          Satish

Yes you can. Make sure that domains configured to use different multicast address. WLS uses multicast for communications between nodes in domain.
although your configuration will work, you could have troubles if you going to execute inter-domain calls between domains/servers with the same names.

Similar Messages

Can i rejoin ny SCVMM 2012 server to domain with same name & IP address?

Dear all..
I am in situation where i have to rejoin my scvmm server to domain with same name & ip address.one of the fool admin has deleted my SCVMM's computer object from AD. I have recreated the object & tried to log on but no luck.. i have to rejoin
the server.
Does it have any risks involved or its just fine?

Hi,
First the behavior is normal. If an computer accounts is deleted, you cannot continue using the server without rejoining.
SCVMM it's not depending (integration) on active directory in such way as Exchange.
So, if the computer accounts has been deleted, there is no issue in creating a new one and rejoin the server. As long as the application on the server is able to look up any required directory services, it should be happy again.
Best Regards,
Jesper Vindum, Denmark
Systems Administrator
Help the forum: Monitor(alert) your threads and vote helpful replies or mark them as answer, if it helps solving your problem.

Two soa domain with same name "TestSOADomain" sharing same SOA schema ?

I tried creating two soa domain with same name "TestSOADomain" (different path) sharing same SOA schema .However one domain came UP to Running mode and other domain going to AdminMode and "soa-infra" application of that domain is not active.
I do want to understand can this be possible with SOA ,ie. two soa domain sharing same SOA schema ?
If possible what are all the problems might come
1. While executing soa composites with asyncronous behaviour ?
2. How the polling services will work ?
3. will the XREF_DATA table ROW_NUMBER column inserted uniquely while inserting data from two different domain into same SOA schema ?
4. Other issues ?
Thanks

Each domain is expected to refer to its own unique database schema. Same SOA schema should not be shared by multiple SOA clusters/domains. It is technically possible though, I suppose, and still can run fine any one SOA environment at any given time with the other SOA environments/domains (sharing the same SOA schema) shutdown. It is not the general/recommended practice to share SOA schema across domains and there could be potential implications and unexpected behavior, particularly when the SOA environments pointing to the same schema are all running at a time.

Two methods with same name but different return type?

Can I have two methods with same name but different return type in Java? I used to do this in C++ (method overloading or function overloading)
Here is my code:
import java.io.*;
public class Test{
public static void main(String ar[]){
try{
//I give an invalid file name to throw IO error.
File file = new File("c:/invalid file name becasue of spaces");
FileWriter writer = new FileWriter(file ,true);
writer.write("Test");
writer.close();
} catch (IOException IOe){
     System.out.println("Failure");
//call first method - displays stack trace on screen
     showerr(NPe);
//call second method - returns stack trace as string
        String msg = showerr(NPe);
        System.out.println(msg);
} // end of main
public static void showerr(Exception e){
     StringWriter sw = new StringWriter();
     PrintWriter pw = new PrintWriter(sw);
     e.printStackTrace(pw);
     try{
     pw.close();
     sw.close();
     catch (IOException IOe){
     IOe.printStackTrace();
     String stackTrace = sw.toString();
     System.out.println("Null Ptr\n" + stackTrace );
}//end of first showerr
public static String showerr(Exception e){
     StringWriter sw = new StringWriter();
     PrintWriter pw = new PrintWriter(sw);
     e.printStackTrace(pw);
     try{
     pw.close();
     sw.close();
     catch (IOException IOe){
     IOe.printStackTrace();
     return sw.toString();
}//end of second showerr
} // end of class
[\code]

Overloading is when you have multiple methods that have the same name and the same return type but take different parameters. See example
public class Overloader {
     public String buildError(Exception e){
          java.util.Date now = new java.util.Date() ;
          java.text.DateFormat format = java.text.DateFormat.getInstance() ;
          StringBuffer buffer = new StringBuffer() ;
          buffer.append(format.format(now))
               .append( " : " )
               .append( e.getClass().getName() )
               .append( " : " )
               .append( e.getMessage() ) ;
          return buffer.toString() ;
     public String buildError(String msg){
          java.util.Date now = new java.util.Date() ;
          java.text.DateFormat format = java.text.DateFormat.getInstance() ;
          StringBuffer buffer = new StringBuffer() ;
          buffer.append(format.format(now))
               .append( " : " )
               .append( msg ) ;
          return buffer.toString() ;
     public String buildErrors(int errCount){
          java.util.Date now = new java.util.Date() ;
          java.text.DateFormat format = java.text.DateFormat.getInstance() ;
          StringBuffer buffer = new StringBuffer() ;
          buffer.append(format.format(now))
               .append( " : " )
               .append( "There have been " )
               .append( errCount )
               .append( " errors encountered.") ;
          return buffer.toString() ;
}Make sense ???
Regards,

Can i have xml elements with same name but one is having attrbt..?

Hi all,
I am suppose to take input from one system into BPEL.That system is auto gererating xml file. But that file is strange. It has two xml element with
same name but with completely different sequence. First one is having two comlexTypes while second is having 5 simple types.
Now the difference is First element is having attribute while second is not.
So is that file is correct.?
thanks a lot.
/mishit

can you post the file? or load the file into JDeveloper and check the syntax or use XMLSpy for validation of the XML.

Unable to protect 2 computers with same name, but different Domains

DPM 2012 R2 and UR2
All DC:s and servers are 2012 R2 + Latest patches.
ad.A.com has full 2 Way trust with ad.B.com. (Different forrest)
DPM Server is DPM.ad.A.com
Computer EXCH.ad.A.com is protected without problem
Computer SQL.ad.B.com is protected without problem
When I try to attach agent from EXCH.ad.B.com I'll get problems.
Error 346: DPM is unable to retrieve the configuration information from EXCH.ad.B.com
I'll guess this has to do with same name of computer, although in different domains. Is this as Designed, or is it a defect?
/Peter

please try a different User to attach/install the DPM Agent.
if this is not the solution, you maybe have a Problem with wmi, try and test with wbemtest
Seidl Michael | http://www.techguy.at |
twitter.com/techguyat | facebook.com/techguyat

Migrating multiple domains with same name - how? Rename? Migrate through temporary domain?

Hi,
we have acquired another company, and they have multiple, separate domains with the same name (every site has a domain with NetBIOS name "COMPANY" and DNS name "company.local"). Now we want to migrate all these domains into ours using
ADMT.
Unfortunately, we did not manage to migrate one of these domains completely, so the trust must remain established for some time. But we have to continue with the second domain - which normally would require a trust, but of course we can't establish a trust
to two domains with the same name at the same time.
I found two potential solutions for the dilemma, but I'm not sure if both are reasonable:
1) Rename the domain with RENDOM.EXE to COMPANY2 and company2.local and then migrate with ADMT
2) Migrate COMPANY to a temporary domain such as COMPANYTEMP and then migrate from COMPANYTEMP to our domain
Given that there are roughly 100 users, 2 domain controllers and 8 other servers, what would be the better approach? Is option 2 possible at all, so would I be able to use the sidHistory attribute migrated from the original COMPANY domain in our domain at
all?
There is also an Exchange 2007 server, which seems to make option 1 impossible unless we find another way to migrate it (like, export all mailboxes to PST before migration) ...

Ok, that's what I expected. Still, I have servers in the old domain, so if I do these steps:
first create a new temporary domain i.e COMPANYTEMP and
create trust between COMPANYTEMP -
COMPANY(Right)
then do the migration with sidHistory from COMPANY(right) --> COMPANYTEMP ,
disconnect the domain COMPANY(right) ,
users will lose connectivity to any servers in the domain. I understand that it does not work with all domains connected? Of course I can't make OURCOMPANY's domain controllers see the DCs of COMPANY (right) in DNS (though I could achieve it the other way
round).
My original plan was:
first create a new temporary domain i.e COMPANYTEMP and
create trust between COMPANYTEMP -
COMPANY(Right)
then do the migration with sidHistory from COMPANY(right) --> COMPANYTEMP ,
create trust between OURDOMAIN and COMPANYTEMP
then do the migration with sidHistory from
COMPANYTEMP --> OURDOMAIN,
Migrate users
Migrate computers
Migrate servers
remove trusts and old domain
But I see that this will not work out, right? So, my only option would be:
first create a new temporary domain i.e COMPANYTEMP and
create trust between COMPANYTEMP -
COMPANY(Right)
then do the migration with sidHistory from COMPANY(right) --> COMPANYTEMP ,
Migrate computers and servers to COMPANYTEMP
Install new Exchange server in COMPANYTEMP
migrate mailboxes to COMPANYTEMP
disconnect / abandon COMPANY(right)
create trust between OURDOMAIN and COMPANYTEMP
then do the migration with sidHistory from COMPANYTEMP
--> OURDOMAIN,
Migrate users
Migrate computers
Migrate servers
Migrate mailboxes
remove trusts and old domain
And to minimize user impact, all this would have to be done in one go (over night), which is hardly possible .........................

Importing files with same name but different extensions

Hope I will be clear enough.
Lets say that instead of sending a file from Lightroom to an external editor, I open it directly in Photoshop.
When I'm done, I save the edited photo using the same name but in a different file format : IMG_1333.cr2 > IMG_1333.psd or IMG_1333.tif, and selecting the same folder location.
Then, I come back into Lightroom and synchronise the folder.
Why is the knew version of the picture not showing up beside the original file, despite the different extension ?
I notice that the different extensions ( .psd or .tif ) are recorded in the sidecar files field in the Metadata panel.
Of course, everything works fine if the file name is modified ( or just by selecting the "copy" option in Photoshop's "save as" dialog box ). Lightroom synchronise dialog shows the new photo to import.
So, why is Lightroom not making a difference between files with the same name but different format extensions ?
Thanks for any hint :-)
Gilles.

Gilles-
I think your problem is likely that you have the option to stack the copy with the original turned on. First, right-click on one of these photos and go to the stacking menu. If Unstack is not grayed out then you have a stack -- select Unstack to reveal all copies.
To change the automatic stacking of edited copies from Photoshop, when you next choose to edit a file, in the bottom left corner of the dialog is the check box for unstacking. Clear it, and that choice should "stick" until you change it again.
Hope this helps!
Tony

Server 2012 - Can't access external website from internal domain with same name. Tried everything.

Hello All.
I have read loads of forums and tried numerous fixes and configurations, but nothing seems to work and I am extremely frustrated at this point.
I have a client where I setup Server 2012 Standard with Exchange 2013. After reading best practice documentation for DNS naming and reasons not to use ".LOCAL" I opted to use ".com.na" in which case the Internal Domain Name and Internet
Website now has the same name.
When attempting to open the extarnal website eg. "www.company.com.na" from a client PC within the internal "company.com.na" Domain, I keep getting error "403 - Forbidden: Access is denied. You do not have permission to view this
directory or page using the credentials that you supplied."
I should also mention, the website is hosted by an ISP and not locally.
I added a "www" Host record in the Forward Lookup Zone, I have added the url and ip address to the Hosts file on a client pc (Windows 7) and even tried setting up Split-Brains DNS. Nothing seems to work.
Running a Tracert takes me to the correct public ip address of the website, but I keep getting this 403 error.
I am so sick and tired of this issue that iI am at the point of backing up the Exchange and re-rolling the entire server with the ".local" DNS domain name. I have a mirror setup in a VMWare environment and simply using "rendom" to rename
the domain seems to cause new issues with Exchange connectivity.
Any pointers and help will be greatly appreciated.
Thanks in advance.
Hentie Loots

I opted to use ".com.na" in which case the Internal Domain Name and Internet Website
now has the same name.
This ends up with a split-DNS stup for internal and external resolution which requires extra administration tasks and attention from the administrators.
When attempting to open the extarnal website eg. "www.company.com.na" from a client PC within the internal "company.com.na" Domain, I keep getting error "403 - Forbidden: Access is denied. You do not have permission to view
this directory or page using the credentials that you supplied."
I should also mention, the website is hosted by an ISP and not locally.
I added a "www" Host record in the Forward Lookup Zone, I have added the url and ip address to the Hosts file on a client pc (Windows 7) and even tried setting up Split-Brains DNS. Nothing seems to work.
Running a Tracert takes me to the correct public ip address of the website, but I keep getting this 403 error.
This means that you are able to reach the Website but it is responding with the access denied error message. That should be checked on the middleware level so if this is IIS running then I would recommend asking them in IIS forum: http://forums.iis.net/
If this is a Website that is completely managed by your ISP then I would recommend checking with them.
This posting is provided AS IS with no warranties or guarantees , and confers no rights.
Ahmed MALEK
My Website Link
My Linkedin Profile
My MVP Profile

Change selected file to a file with same name but different extension.

So I'm getting better at using Automator to create useful Services but still a bit of a newbie with doing powerful things with AppleScript... and I think this task requires some applescripting. Here's what I want to do:
1. Based on a selected text file I want to run a pre-existing script that converts this file into an HTML file. This new file has the same name as the text file but has the .html extension rather than the .txt extension. (This step is easy enough and it works just fine already.)
2. BUT NOW, I want to take that resulting HTML file and run another pre-existing script that converts the HTML file into an RTF file. The problem is that I basically want to change the selection from selectedfile.TXT to selectedfile.HTML so that I can proceed to this next step...
3. AND THEN, I want to launch an app with this resulting RTF file. Again, I need to change the selection to selectedfile.RTF.
Right now this requires me to run three different services, and changing the selected file between each step... But I'm sure there's an easy applescript way (or other way) to do this using just one service -- probably involves some filename parsing and some magic to change the selection??? -- or something like that...
Could anyone point me in the right direction???
Thank you thank you thank you!
~zyyyy

You can chain your scripts together - depending on the complexity of your pre-existing scripts, you could do this with either AppleScript or Automator. The workflow would just take the selected text file (from step 1), convert to both HTML (2) and RTF (3), then launch your application with the resulting RTF - no need to change any selection.
By the way, this is the Tiger Automator forum - Snow Leopard's Automator is quite a bit different, so you will probably have better luck posting in the Snow Leopard forum.

How to mass-reindex files with same name but different file extensions

(reposting cos I'm confused about if I posted in the proper place before. Please delete if it is a repost.)
So I'm on a remote workflow. I pick all the raw data and convert it in two quality standards, one on 'high' with full specifications and one on 'low' so I can send 2gb instead of 80gb of files through the internet for me to work remotely on, and to speed up the overall work rhythm because files are lighter. All I need to do is to work at my home with the low quality files, send it back to the client's computer after finished, re-index all files in their high resolution twins and we are good to go to finish the product with highest quality possible. But both high and low quality files need to be the same extension, that I picked .mp4 for it is the standard for pretty much anything.
The point is, if I want to go full mobile, I only have an old HP Pavillion notebook and I really need to work with a video codec that goes very easy on it. I can only think about some 16:9 DV format. But the point is, this format generates a different file extension than my .mp4 standard, and Premiere, to my knowledge, really can't reindex files using only the file name while ignoring the file extension. It really should. And I really need to know how.
We also need to consider Premiere versions that allow themselves to be installed at x32 processors. My desktop is x64 and I really have no problem to work on these standards, the problem is, in my notebook I really can't.
So, halp?

i want to say it was added in cs7, which requires subscription, so in that case might as well be using latest version 8. if you had to use an older version like cs5, you could still use h264 or low bitrate dnxhd/prores codecs inside a quicktime .mov file. that would allow you to have same file ext on both versions of files.

Can I have two Aperture projects with same name?

Hi. I'm new to Aperture and an advanced iPhoto user. I started using Aperture sharing the same library with iPhoto (that new functionallity).
I've read lots of manuals and tutorials (Apple's and others) as well as this support topics. I understand iPhoto Events are now Aperture Projects and I've read a lot about how should it be organized and so on.
My problem is: I got, for example, 4 iPhoto Events with the name "Friends". The appear in Apperture as 4 Projects named "Friends". I decided to rename one of them and the I came back to "Friends" name. Aperture won't let me: it appends "(1)". It seems I cannot name to Projects the same way, although I have that.
Before: Friends, Friends, Friends, Friends
After renaming one of them and trying to get back to original name: Friends, Friends, Friends, Friends (1)
I have that duplicated name because it is like a title, photos of my friends in different time (one Friends is from 2005, other from 2010, and so on, for example).
It seems pretty bad I have to come up with a new name for each new Project, considering I have hundreds of them today. Any tips? Thanks.

If there is nothing separating the images then put them all in the same project. If you have a project Friends you know all your friends images are in there and you can find the ones you want by date or keyword or even Face.
There is no requirement to have the images from different times at the bar to be in different projects. I personally wouldn't work that way but if having a project called Friends at Bar works for you then place all the images of your friends at the bar in that project.
Of course another way to look at this is to use albums to pull all the images of your Friends at Bars together. Don't have the name of the project organize your library, create albums and/or smart albums to collect the images into meaningful groupings.
regards

Changing a DC in Domain, with Same name and IP

hey we have a domain with 3DC (srv1, DC Operation Master and GC ; srv2 DC and GC ; and srv3 only DC)
srv3 is a file server with many shares like //srv3/folder/myfiles
so i really want to keep the name and IP!!
my plan is to degrade the srv3 to normal server and add to a workgroup.
Delete it from ad under domain controllers. So my domain only works with my two domain controllers.
Wait 1 or 2 Days. perhaps do a manuel replication ... so be clear tat the srv3 is really removed from the domain.
And after all i would take my brand new Server give him same name and ip an add him to the domain. level him up to a dc and i hope all would be fine :)

Greetings!
Just demote the DC successfully (No Force Removal!)and check the replication between two domain controllers. If everything were in good condition you can use the same IP and Name in a new server. No need to wait for couple of days.
Regards.
Mahdi Tehrani |
|
www.mahditehrani.ir
Please click on Propose As Answer or to mark this post as
and helpful for other people.
This posting is provided AS-IS with no warranties, and confers no rights.
How to query members of 'Local Administrators' group in all computers?

Using multiple SSIDs with same name but different PSKs

I have a central WLC 2504 controller that is being used for remote site FlexConnect 1141 APs. They all advertise three different SSIDs. One SSID is a global SSID that is the same at every office. One is a hidden SSID using 802.1x machine auth.
The one I am trying to get working is the local office guest network. These SSIDs are all the same at each office but should have different PSKs. They are local to the office, therefore would only ever be applied to a specific FlexConnect group.
I understand why in theory this is generally not a good idea but given these are for remote sites I'd like it to be possible. I always get this message though:
"WLAN with duplicate SSID and L2 security policy found"
Is there a way around this? New WLC code that allows it maybe?

I was able to configure three (more I think possible) WLANs with same SSID name and all are WPA2-AES-PSK on the same WLC and all are enabled at hte same time.
Note that you can not have any of those broadcasting on same AP group. Each WLAN can be only broadcasted on a separate AP group. For your sites, It will probably need you to define an AP group for each site to broadcast different WLANs on different sites.
You can do that if all your WLANs have an ID of 17 or higher. (the reason is, WLANs of 1-16 are by default broadcasted on the default AP group. and because those can not be on the same AP group - including the default one - then you can't have them with WLAN IDs 1-16. i.e on same - default - AP group)
HTH
Amjad
rating useful replies is more useful than saying "Thank you"

Grouping albums with same name but different artist?

I have two albums in iTunes 7 which will not group correctly - either they show up as 24 or so separate albums or a single compilation or so on! I've tried marking them as compilations, as not compilations, you name it.
They share the same album name, but have different artists and genres. How can I convince iTunes that they are two distinct albums? (I would have thought this test should be part of the application's logic, to be honest!)
Gavin

Note: I have this album set to be a compilation, I have filled in Queen in all 17 tracks as the album artist and all 17 tracks have the same Album name, it still does not group together properly when sorting by Album Artist (only when sorting by Album Name).
iTunes 7 adds support for the ¨Album Artist¨ tag (as used and required by Windows Media Player). Adding support for this tag was actually a request I made myself a while ago.
Unfortunately iTunes is not using this tag in a useful way (as it was intended). The purpose of this tag (as used by Windows Media Player) is to cope with Albums that contain more than one artist, a good example album is Queen's Greatest Hits III (see http://phobos.apple.com/WebObjects/MZStore.woa/wa/viewAlbum?id=161431875&s=14344 4 ) this album contains tracks by or featuring David Bowie and George Michael (amongst others) as well as Queen themselves, despite this, everyone would consider the Album itself to be by Queen.
The purpose of the Album Artist tag is so that you can browse by the Album Artist and see the entire album listed (and not just those tracks specifically by Queen themselves). Therefore iTunes should if in browse view mode and sorted by Album Artist show the entire album grouped together - IT DOES NOT. Instead it appears to be being sub-sorted by Artist (as well as Album Artist) and this results in it being split in to 3 or more sections. This applies to all three view modes including the Coverflow view.
As things stand the only benefit I get from iTunes now supporting the Album Artist tag is greater compatibility with Windows Media Player, apart from that it appears completely useless in iTunes as currently implemented.

Can I run 2 different domains with same name but on 2 different machines?

Similar Messages

Maybe you are looking for