Can I run a BI Publisher report from interactive report

Hi,
I have an APEX interactive report and want to run a BI publisher report by clicking on a column value within the interactive report. Is that possible?

Hi 918900,
This is possible.
Set the column in the interactive report as link to page 0 with the report name in the request field
PRINT_REPORT=<your report>. Don't forget to specify the Display type for the column as 'Standard Report Column'.
Geert.

Similar Messages

  • Can we run one report from another Report in reports 6i

    Actually my requirement is i want to run 4 reports from another report(driver report) by passing parameter same as the driver report.
    i want to see the out put on the screen report by report next to driver report output.is it possible?? actually i got the solution for printing or taking file. but i want to show the output on the screen.
    Edited by: user9165808 on Feb 16, 2010 3:21 AM

    I used SRW.RUN_REPORT () . But my question that is it possible to show report in batches on screen??
    Edited by: user9165808 on Feb 19, 2010 4:23 AM

  • Can I run a Unique Clients and Users Summary report customized by both floor area and SSID?

    In Cisco Prime, can I run a Unique Clients and Users Summary report customized by both floor area and SSID?

    Allright guys. I appreciate the quick responses. I've worked a lot in CR however i am not understanding the solution so I'd appreciate if you can dumb it down for me. If i understand it correctly you guys are suggesting to make a formula, that either return my group by string (which is a formula in my report) or the Quantity. I tried writing a formula like this
    if ({@param} = 1 then
    GroupName ({@GroupBy})
    else
    {NetPNL.GrossAfterAdj}
    but it seems like CR does not allow you to return 2 different data types. Even if it had worked i would not know what to do from there. Can anyone please dumb it down for me. To make my situation more clear below is an example of how my data is..
    MN 100
    MN 200
    MN 50
    CA 300
    CA 500
    when the data shows in the report, its grouped by state, so it comes out like
    MN 350
    CA 800
    I want the users to decide whether they want it sorted by state  (ascending)
    CA 800
    MN 350
    or Total quantity (asc)
    MN 350
    CA 800

  • How can we read the screen field values from the report selection screen wi

    Hi expart,
    How can we read the screen field values from the report selection screen with out having an ENTER button pressed  .
    Regards
    Razz

    use this code...
    AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_posnr.
    **Read the Values of the SCREEN FIELDs
    CALL FUNCTION 'DYNP_VALUES_READ'

  • How Can I Run a SQL Loader Job from Schedular

    How Can I Run a SQL Loader Job from Schedular , So that It Runs every Day.

    Depends on a couple of factors.
    If you are on a UNIX platform, you can create a shell script and schedule it with cron.
    If you are on a Windows platform, you can create a batch file and schedule it with the Windows scheduler.
    Or, if you are on Oracle 9i or 10g, you could use the external table feature instead of SQL*Loader. Then you could write a stored procedure to process the external table and schedule it using the Oracle scheduler (DBMS_JOB). This would probably be my preference.

  • CR2008 Not enough memory while exporting reports from Crystal Reports 2008

    I have recently upgraded our Crystal Reports version from Crystal Reports Basic for Visual Studio 2008 to Crystal Reports 2008. After upgradation I am facing the problem "Memory full.OtherErrorFailed to export the report. Not enough memory for operation" when I am trying to export the report from Crystal Reports 2008 Report viewer, or directly from the code behind. The application is hosted application. The problem occurs in our production environment.
    Server details:
    OS: Windows 2003 Enterprise Edition R2 with SP2
    IIS: IIS 6
    .Net Framework: 3.5
    Application details:
    Hosted application using Crystal Reports 2008 SP 3
    Crystal Reports Viewer version: 12.0.2000.0
    The data binding of the report object is done through an ADODB dataset.
    Web.Config:
    <configuration xmlns="http://schemas.microsoft.com/.NetConfiguration/v2.0">
      <configSections>
        <sectionGroup name="businessObjects">
          <sectionGroup name="crystalReports">
            <section name="printControl" type="System.Configuration.NameValueSectionHandler" />
            <section name="crystalReportViewer" type="System.Configuration.NameValueSectionHandler" />
          </sectionGroup>
        </sectionGroup>
      </configSections>
      <businessObjects>
        <crystalReports>
          <printControl>
            <add key="url" value="http://myserver/mysite/PrintControl.cab" />
          </printControl>
          <crystalReportViewer>
            <add key="documentView" value="weblayout" />
          </crystalReportViewer>
        </crystalReports>
      </businessObjects>
      <appSettings>
        <add key="CrystalImageCleaner-AutoStart" value="true" />
        <add key="CrystalImageCleaner-Sleep" value="60000" />
        <add key="CrystalImageCleaner-Age" value="120000" />
      </appSettings>
      <system.web>
        <httpHandlers>
          <add path="CrystalImageHandler.aspx" verb="GET" type="CrystalDecisions.Web.CrystalImageHandler, CrystalDecisions.Web, Version=12.0.2000.0, Culture=neutral, PublicKeyToken=692fbea5521e1304" />
        </httpHandlers>
        <compilation debug="false">
          <assemblies>
            <add assembly="CrystalDecisions.Data.AdoDotNetInterop, Version=12.0.2000.0, Culture=neutral, PublicKeyToken=692FBEA5521E1304" />
            <add assembly="CrystalDecisions.Shared, Version=12.0.2000.0, Culture=neutral, PublicKeyToken=692fbea5521e1304" />
            <add assembly="CrystalDecisions.ReportAppServer.ClientDoc, Version=12.0.1100.0, Culture=neutral, PublicKeyToken=692fbea5521e1304" />
            <add assembly="CrystalDecisions.Web, Version=12.0.2000.0, Culture=neutral, PublicKeyToken=692fbea5521e1304" />
            <add assembly="CrystalDecisions.Enterprise.InfoStore, Version=12.0.1100.0, Culture=neutral, PublicKeyToken=692fbea5521e1304" />
            <add assembly="CrystalDecisions.Enterprise.Framework, Version=12.0.1100.0, Culture=neutral, PublicKeyToken=692fbea5521e1304" />
            <add assembly="CrystalDecisions.ReportSource, Version=12.0.2000.0, Culture=neutral, PublicKeyToken=692fbea5521e1304" />
            <add assembly="CrystalDecisions.CrystalReports.Engine, Version=12.0.2000.0, Culture=neutral, PublicKeyToken=692fbea5521e1304" />
          </assemblies>
      </system.web>
      <system.webServer>
         <handlers>
             <add name="CrystalImageHandler.aspx_GET" verb="GET" path="CrystalImageHandler.aspx" type="CrystalDecisions.Web.CrystalImageHandler, CrystalDecisions.Web, Version=12.0.2000.0, Culture=neutral, PublicKeyToken=692fbea5521e1304" preCondition="integratedMode" />
         </handlers>
      </system.webServer>
    </configuration>
    Sample Code:
    Report = new CrystalDecisions.CrystalReports.Engine.ReportDocument();
    Report.Load(Server.MapPath(strReportPath));
    Report.SetDataSource(dsReport);
    Creportviewer.ReportSource = Report;
    For exporting the report to PDF
    string Filename = Path.Combine(Environment.GetFolderPath(Environment.SpecialFolder.InternetCache).ToString(), Guid.NewGuid().ToString() + ".pdf");
    Report.ExportToDisk(ExportFormatType.PortableDocFormat, Filename);
    Clean Up Code: (Page_UnLoad event)
    if (Report != null)
         Report.Close();
         Report.Dispose();
    Creportviewer.ReportSource = null;
    Creportviewer.Dispose();
    dsReport = null;
    GC.Collect();
    GC.WaitForPendingFinalizers();
    Can someone help me resolve the issue.

    The .rpt file size is 14MB with the Data Save option enabled, 12MB without Data Save.  Presumably the 12MB file size is because of the 24bit PNG we have as our background.
    The Designer executes the report in less than a second and we can scroll through all pages and see the image fields perfectly.
    When we Export to PDF, the Designer takes a long time, eventually gets to the 77%, the 7th record and returns "Export report failed" followed by "Memory full".  If we export only page 1 of the 3 pages, it also returns a Memory full error.  However, when the same report is run with only 1 page, that page exports to PDF but with a ridiculously large size and export time.
    The machine has 2GB of physical memory with an 8GB pagefile with Windows 2003 (latest everything).  The process runs up to about 1GB before reporting the memory full error.
    We've also tried a variety of other suggestions posted in the other thread with no success.
    We're happy to provide the RPT file to the Report Team to diagnose the problem.  Ultimately, we need to be able to produce a 15 page report with approximately 45 images.
    Our preferred scenario is fixing problem 2.  The CR Designer seems quite capable of rendering our report and printing it to our third party PDF printer in a timely manner with small size.  However, the API reports memory full.
    The API resides in a dedicated reporting web service with NO other code except for loading the report, setting parameters and printing.  When executing, it uses up to about 1.1GB before reporting the error.
    Are there any other suggestions for fixing what we have?  Are there known problems with large images in reports?  Do we need to lodge a formal support request?
    Regards,  Grant.
    PS.  Grr and my message formatting is lost when I edited this message!!!
    There is a 1500 character limit and then all formatting is removed to save space. Break you posts into separate entries.
    Edited by: grantph on Sep 30, 2009 2:49 AM

  • Calling a report from a report (10g)

    Hi
    I am using DeveloperSuite 10g and Application Server 9.0.4 - I am trying to call a report from another report.
    I believe I am correct in thinking that as buttons don't exist in reports any more I have to use a hyperlink containing the URL to the reports service with appropriate parameters to invoke the required report.
    My problem is that when I click on the hyperlink I do not see the called report, but get an html screen saying "Oracle Report Status - Successfully run".
    My hyperlink is formed like this:
    /reports/rwservlet?module=reportb.rdf
    Is there an additional parameter I must pass to get the report to display on the client browser window?
    Thanks

    Hi,
    Can someone let me know as to what the maximum length of the URL string that could be formed? I believe in IE browser a maximum of 64,000 characters can only be formed. If I need to pass many parameters and the length of the values passed exceeds the default length in IE, the rest of the values will not be captured in the report server.
    Please let me know on how to proceed with this problem.

  • Calling a Report from another Report.....URGENT

    Hi,
    I am calling a report from another report using hyperlink. I want that this new report should come in a new page.
    Can any body help me where i can set this property, so that the new report will open in a new page.
    Thanks in advance
    Regards
    Kamal

    Try to call report from report by a button in the calling report:
    1     In the Layout Model view, click in the tool palette. Note
    2     Click and drag a rectangle.
    3     Double-click the button object to display the Property Palette.
    4     Under the Button Label node, set the Label Type property to either Text or Icon:
    n     If the button label is text, set the Text property to the text you want to appear on the button.
    n     If the button label is an icon, set the Icon Name property to the name of the file containing the icon (the file must reside in the directory specified by the UI_ICON environment variable).
    5     Under the Button Behavior node, set the Type property to PL/SQL.
    6     Double-click the PL/SQL Trigger property value field.
    7     In the PL/SQL Editor, define the PL/SQL for the action trigger or format trigger when the button is clicked in the formatted report.
    8     Set other properties as desired.
    9     To activate the button, run the report, then display it in the Runtime Previewer.

  • Download data from interactive report

    Hi all. I'm on apex 3.1.1.00.09.
    I have this problem: when I download data from interactive report I can download only in CSV and PDF. If I try to download into pdf it creates a file of only 1 KB.
    I would know if I must configure my apex in order to download correctly in pdf and if I must configure it in order to download in doc and xls format.
    Thanks all for collaboration,
    Fabrizio

    Thank you for your reply.
    I am able to download the csv file, but my problem is: I don't want the column headings to show.
    Is it possible to download only the data, not the column headings?

  • Calling a report from another report

    Hi,
    Is there any way ,(any built in ) to call a report from another report in Report Builder 2000 and Report Builder 6i.
    Regards

    Try to call report from report by a button in the calling report:
    1     In the Layout Model view, click in the tool palette. Note
    2     Click and drag a rectangle.
    3     Double-click the button object to display the Property Palette.
    4     Under the Button Label node, set the Label Type property to either Text or Icon:
    n     If the button label is text, set the Text property to the text you want to appear on the button.
    n     If the button label is an icon, set the Icon Name property to the name of the file containing the icon (the file must reside in the directory specified by the UI_ICON environment variable).
    5     Under the Button Behavior node, set the Type property to PL/SQL.
    6     Double-click the PL/SQL Trigger property value field.
    7     In the PL/SQL Editor, define the PL/SQL for the action trigger or format trigger when the button is clicked in the formatted report.
    8     Set other properties as desired.
    9     To activate the button, run the report, then display it in the Runtime Previewer.

  • Calling a report from a report

    I would like to know how to call a report from another report
    Thanx in advance
    RAM

    you can use a SRW.RUN_REPORT to calla report from a report

  • Can anyone plz send a simple example of interactive reports

    Hi gurus,
    Can anyone plz send a simple example of interactive reports using subscreenswhich contains at line-selection, at user-command, pf and other commands.
    Thanks in advance.

    Hi,
    * Macro definition
    DEFINE m_fieldcat.
      add 1 to ls_fieldcat-col_pos.
      ls_fieldcat-fieldname   = &1.
      ls_fieldcat-ref_tabname = &2.
      ls_fieldcat-cfieldname  = &3.
      ls_fieldcat-qfieldname  = &4.
      append ls_fieldcat to lt_fieldcat.
    END-OF-DEFINITION.
    TYPE-POOLS: slis.                      " ALV Global types
    TYPES:
      BEGIN OF ty_vbak,
        vkorg TYPE vbak-vkorg,             " Sales organization
        kunnr TYPE vbak-kunnr,             " Sold-to party
        vbeln TYPE vbak-vbeln,             " Sales document
        netwr TYPE vbak-netwr,             " Net Value of the Sales Order
        waerk TYPE vbak-waerk,             " Currency
      END OF ty_vbak,
      BEGIN OF ty_vbap,
        vbeln  TYPE vbap-vbeln,            " Sales document
        posnr  TYPE vbap-posnr,            " Sales document item
        matnr  TYPE vbap-matnr,            " Material number
        arktx  TYPE vbap-arktx,            " Short text for sales order item
        kwmeng TYPE vbap-kwmeng,           " Order quantity
        vrkme  TYPE vbap-vrkme,            " Quantity Unit
        netwr  TYPE vbap-netwr,            " Net value of the order item
        waerk  TYPE vbap-waerk,            " Currency
      END OF ty_vbap.
    DATA :
      gs_vbak TYPE ty_vbak,
    * Data displayed in the first list
      gt_vbak TYPE TABLE OF ty_vbak,
    * Data displayed in the second list
      gt_vbap TYPE TABLE OF ty_vbap.
    SELECT-OPTIONS :
      s_vkorg FOR gs_vbak-vkorg,           " Sales organization
      s_kunnr FOR gs_vbak-kunnr,           " Sold-to party
      s_vbeln FOR gs_vbak-vbeln.           " Sales document
    SELECTION-SCREEN :
      SKIP, BEGIN OF LINE,COMMENT 5(27) v_1 FOR FIELD p_max.    "#EC NEEDED
    PARAMETERS p_max(2) TYPE n DEFAULT '20' OBLIGATORY.
    SELECTION-SCREEN END OF LINE.
    INITIALIZATION.
      v_1 = 'Maximum of records to read'.
    START-OF-SELECTION.
      PERFORM f_read_data_vbak.
      PERFORM f_display_data_vbak.
    *      Form  f_read_data_vbak
    FORM f_read_data_vbak.
      SELECT vkorg kunnr vbeln netwr waerk
        INTO CORRESPONDING FIELDS OF TABLE gt_vbak
          UP TO p_max ROWS
        FROM vbak
       WHERE kunnr IN s_kunnr
         AND vbeln IN s_vbeln
         AND vkorg IN s_vkorg
         and vbtyp = 'C'.                  " C = Sales Orders.
    ENDFORM.                               " F_READ_DATA_VBAK
    *      Form  f_display_data_vbak
    FORM f_display_data_vbak.
      DATA:
        ls_fieldcat TYPE slis_fieldcat_alv,
        lt_fieldcat TYPE slis_t_fieldcat_alv.
    * Build the field catalog
      m_fieldcat 'VKORG' 'VBAK' '' ''.
      m_fieldcat 'KUNNR' 'VBAK' '' ''.
      m_fieldcat 'VBELN' 'VBAK' ''  ''.
      m_fieldcat 'NETWR' 'VBAK' 'WAERK' ''.
      m_fieldcat 'WAERK' 'VBAK' ''  ''.
    * Display the first list
      CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
        EXPORTING
          i_callback_program      = sy-cprog
          i_callback_user_command = 'USER_COMMAND'
          it_fieldcat             = lt_fieldcat
        TABLES
          t_outtab                = gt_vbak.
    ENDFORM.                               " F_DISPLAY_DATA_VBAK
    *       FORM USER_COMMAND                                             *
    FORM user_command USING u_ucomm     TYPE syucomm
                            us_selfield TYPE slis_selfield.     "#EC CALLED
      CASE u_ucomm.
        WHEN '&IC1'.
          READ TABLE gt_vbak INDEX us_selfield-tabindex INTO gs_vbak.
          CHECK sy-subrc EQ 0.
          PERFORM f_read_data_vbap.        " Read data from VBAP
          PERFORM f_display_data_vbap.
      ENDCASE.
    ENDFORM.                               " USER_COMMAND
    *      Form  f_read_data_vbap
    FORM f_read_data_vbap.
      SELECT vbeln posnr matnr arktx kwmeng vrkme netwr waerk
        INTO CORRESPONDING FIELDS OF TABLE gt_vbap
        FROM vbap
       WHERE vbeln = gs_vbak-vbeln.
    ENDFORM.                               " F_READ_DATA_VBAP
    *      Form  f_display_data_vbap
    FORM f_display_data_vbap.
      DATA:
        ls_fieldcat TYPE slis_fieldcat_alv,
        lt_fieldcat TYPE slis_t_fieldcat_alv.
    * Build the field catalog
      m_fieldcat 'VBELN'  'VBAP' '' ''.
      m_fieldcat 'POSNR'  'VBAP' '' ''.
      m_fieldcat 'MATNR'  'VBAP' '' ''.
      m_fieldcat 'ARKTX'  'VBAP' '' ''.
      m_fieldcat 'KWMENG' 'VBAP' '' 'VRKME'.
      m_fieldcat 'VRKME'  'VBAP' '' ''.
      m_fieldcat 'NETWR'  'VBAP' 'WAERK' ''.
      m_fieldcat 'WAERK'  'VBAP' '' ''.
    * Display the second list
      CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
        EXPORTING
          it_fieldcat = lt_fieldcat
        TABLES
          t_outtab    = gt_vbap.
    ENDFORM.                               " F_DISPLAY_DATA_VBAP
    2nd example
    * Macro definition
    DEFINE m_fieldcat.
      add 1 to ls_fieldcat-col_pos.
      ls_fieldcat-fieldname   = &1.
      ls_fieldcat-ref_tabname = &2.
      append ls_fieldcat to lt_fieldcat.
    END-OF-DEFINITION.
    TYPE-POOLS: slis.                      " ALV Global types
    SELECTION-SCREEN :
      SKIP, BEGIN OF LINE,COMMENT 5(27) v_1 FOR FIELD p_max.    "#EC NEEDED
    PARAMETERS p_max(2) TYPE n DEFAULT '20' OBLIGATORY.
    SELECTION-SCREEN END OF LINE.
    TYPES:
    * Data displayed in the first list
      BEGIN OF ty_kna1,
        kunnr TYPE kna1-kunnr,             " Customer number
        name1 TYPE kna1-name1,             " Customer name
        ort01 TYPE kna1-ort01,             " Customer city
      END OF ty_kna1,
    * Data displayed in the second list
      BEGIN OF ty_vbak,
        vkorg TYPE vbak-vkorg,             " Sales organization
        kunnr TYPE vbak-kunnr,             " Sold-to party
        vbeln TYPE vbak-vbeln,             " Sales document
        netwr TYPE vbak-netwr,             " Net Value of the Sales Order
      END OF ty_vbak,
    * Data displayed in the third list
      BEGIN OF ty_vbap,
        vbeln  TYPE vbap-vbeln,            " Sales document
        posnr  TYPE vbap-posnr,            " Sales document item
        matnr  TYPE vbap-matnr,            " Material number
        arktx  TYPE vbap-arktx,            " Short text for sales order item
        kwmeng TYPE vbap-kwmeng,           " Order quantity
        netwr  TYPE vbap-netwr,            " Net value of the order item
      END OF ty_vbap.
    DATA:
      gs_kna1 TYPE ty_kna1,
      gt_kna1 TYPE TABLE OF ty_kna1,
      gs_vbak TYPE ty_vbak,
      gt_vbak TYPE TABLE OF ty_vbak,
      gt_vbap TYPE TABLE OF ty_vbap.
    INITIALIZATION.
      v_1 = 'Maximum of records to read'.
    START-OF-SELECTION.
      PERFORM f_read_data_kna1.
    END-OF-SELECTION.
      PERFORM f_display_data_kna1.
    *      Form  f_read_data_kna1
    FORM f_read_data_kna1.
    * Read customer data with a least one order
      SELECT kunnr name1 ort01 INTO TABLE gt_kna1
               FROM kna1 AS k
                 UP TO p_max ROWS
              WHERE EXISTS
           ( SELECT kunnr FROM vbak WHERE kunnr = k~kunnr ).
    ENDFORM.                               " F_READ_DATA_KNA1
    *      Form  f_display_data_kna1
    FORM f_display_data_kna1.
      DATA:
        ls_fieldcat TYPE slis_fieldcat_alv,
        lt_fieldcat TYPE slis_t_fieldcat_alv.
    * Build the field catalog
      m_fieldcat 'KUNNR' 'KNA1'.
      m_fieldcat 'NAME1' 'KNA1'.
      m_fieldcat 'ORT01' 'KNA1'.
    * Display the first list
      CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
        EXPORTING
          i_callback_program      = sy-cprog
          i_callback_user_command = 'USER_COMMAND_KNA1'
          it_fieldcat             = lt_fieldcat
        TABLES
          t_outtab                = gt_kna1.
    ENDFORM.                               " F_DISPLAY_DATA_KNA1
    *       FORM USER_COMMAND_KNA1                                        *
    FORM user_command_kna1 USING u_ucomm     TYPE sy-ucomm
                                 us_selfield TYPE slis_selfield."#EC CALLED
      CASE u_ucomm.
        WHEN '&IC1'.
          READ TABLE gt_kna1 INDEX us_selfield-tabindex INTO gs_kna1.
          CHECK sy-subrc EQ 0.
          PERFORM f_read_data_vbak.        " Read data from VBAK
          PERFORM f_display_data_vbak.     " Display orders
      ENDCASE.
    ENDFORM.                               " USER_COMMAND_KNA1
    *      Form  f_read_data_vbak
    FORM f_read_data_vbak.
      SELECT vkorg kunnr vbeln netwr
        INTO TABLE gt_vbak
        FROM vbak
          UP TO p_max ROWS
       WHERE kunnr = gs_kna1-kunnr.
    ENDFORM.                               " F_READ_DATA_VBAK
    *      Form  f_display_data_vbak
    FORM f_display_data_vbak.
      DATA:
        ls_fieldcat TYPE slis_fieldcat_alv,
        lt_fieldcat TYPE slis_t_fieldcat_alv.
    * Build the field catalog
      m_fieldcat 'VKORG' 'VBAK'.
      m_fieldcat 'KUNNR' 'VBAK'.
      m_fieldcat 'VBELN' 'VBAK'.
      m_fieldcat 'NETWR' 'VBAK'.
    * Display the second list
      CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
        EXPORTING
          i_callback_program      = sy-cprog
          i_callback_user_command = 'USER_COMMAND_VBAK'
          it_fieldcat             = lt_fieldcat
        TABLES
          t_outtab                = gt_vbak.
    ENDFORM.                               " F_DISPLAY_DATA_VBAK
    *       FORM USER_COMMAND_VBAK                                        *
    FORM user_command_vbak USING u_ucomm     TYPE sy-ucomm
                                 us_selfield TYPE slis_selfield."#EC CALLED
      CASE u_ucomm.
        WHEN '&IC1'.
          READ TABLE gt_vbak INDEX us_selfield-tabindex INTO gs_vbak.
          CHECK sy-subrc EQ 0.
          PERFORM f_read_data_vbap.        " Read data from VBAP
          PERFORM f_display_data_vbap.     " Display items
      ENDCASE.
    ENDFORM.                               " USER_COMMAND_VBAK
    *      Form  f_read_data_vbap
    FORM f_read_data_vbap.
      SELECT vbeln posnr matnr arktx kwmeng netwr
        INTO TABLE gt_vbap
        FROM vbap
       WHERE vbeln = gs_vbak-vbeln.
    ENDFORM.                               " F_READ_DATA_VBAP
    *      Form  f_display_data_vbap
    FORM f_display_data_vbap.
      DATA:
        ls_fieldcat TYPE slis_fieldcat_alv,
        lt_fieldcat TYPE slis_t_fieldcat_alv.
    * Build the field catalog
      m_fieldcat 'VBELN'  'VBAP'.
      m_fieldcat 'POSNR'  'VBAP'.
      m_fieldcat 'MATNR'  'VBAP'.
      m_fieldcat 'ARKTX'  'VBAP'.
      m_fieldcat 'KWMENG' 'VBAP'.
      m_fieldcat 'NETWR'  'VBAP'.
    * Display the third list
      CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
        EXPORTING
          it_fieldcat = lt_fieldcat
        TABLES
          t_outtab    = gt_vbap.
    ENDFORM.                               " F_DISPLAY_DATA_VBAP
    3rd Example
    ** Macro definition*
    *DEFINE m_fieldcat.*
      *add 1 to ls_fieldcat-col_pos.*
      *ls_fieldcat-fieldname   = &1.*
      *ls_fieldcat-ref_tabname = &2.*
      *append ls_fieldcat to lt_fieldcat.*
    *END-OF-DEFINITION.*
    *CONSTANTS :*
      *c_x VALUE 'X'.*
    *TYPE-POOLS: slis.                      " ALV Global types*
    *TYPES:*
    ** Data displayed in the first list*
      *BEGIN OF ty_vbak,*
        *vkorg TYPE vbak-vkorg,             " Sales organization*
        *kunnr TYPE vbak-kunnr,             " Sold-to party*
        *vbeln TYPE vbak-vbeln,             " Sales document*
        *netwr TYPE vbak-netwr,             " Net Value of the Sales Order*
      *END OF ty_vbak,*
    ** Data displayed in the popup list*
      *BEGIN OF ty_vbap,*
        *posnr  TYPE vbap-posnr,            " Sales document item*
        *matnr  TYPE vbap-matnr,            " Material number*
        *arktx  TYPE vbap-arktx,            " Short text for sales order item*
        *kwmeng TYPE vbap-kwmeng,           " Order quantity*
        *netwr  TYPE vbap-netwr,            " Net value of the order item*
      *END OF ty_vbap.*
    *DATA :*
      *g_vkorg TYPE vbak-vkorg,*
      *g_kunnr TYPE vbak-kunnr,*
      *g_vbeln TYPE vbak-vbeln,*
      *gt_vbak TYPE TABLE OF ty_vbak,*
      *gt_vbap TYPE TABLE OF ty_vbap.*
    *SELECT-OPTIONS :*
      *s_vkorg FOR g_vkorg,                 " Sales organization*
      *s_kunnr FOR g_kunnr,                 " Sold-to party*
      *s_vbeln FOR g_vbeln.                 " Sales document*
    *SELECTION-SCREEN :*
      *SKIP, BEGIN OF LINE,COMMENT 5(27) v_1 FOR FIELD p_max.    "#EC NEEDED*
    *PARAMETERS p_max(2) TYPE n DEFAULT '20' OBLIGATORY.*
    *SELECTION-SCREEN END OF LINE.*
    *INITIALIZATION.*
      *v_1 = 'Maximum of records to read'.*
    *START-OF-SELECTION.*
      *PERFORM f_read_data_vbak.*
      *PERFORM f_display_data_vbak.*
    **      Form  f_read_data_vbak*
    *FORM f_read_data_vbak.*
      *SELECT vkorg kunnr vbeln netwr*
        *INTO TABLE gt_vbak*
        *FROM vbak*
          *UP TO p_max ROWS*
       *WHERE kunnr IN s_kunnr*
         *AND vbeln IN s_vbeln*
         *AND vkorg IN s_vkorg.*
    *ENDFORM.                               " F_READ_DATA_VBAK*
    **      Form  f_display_data_vbak*
    *FORM f_display_data_vbak.*
      *DATA:*
        *ls_fieldcat TYPE slis_fieldcat_alv,*
        *lt_fieldcat TYPE slis_t_fieldcat_alv.*
    ** Build the field catalog*
      *m_fieldcat 'VKORG' 'VBAK'.*
      *m_fieldcat 'KUNNR' 'VBAK'.*
      *m_fieldcat 'VBELN' 'VBAK'.*
      *m_fieldcat 'NETWR' 'VBAK'.*
    ** Display the first list*
      *CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'*
        *EXPORTING*
          *i_callback_program      = sy-cprog*
          *i_callback_user_command = 'USER_COMMAND'*
          *it_fieldcat             = lt_fieldcat*
        *TABLES*
          *t_outtab                = gt_vbak.*
    *ENDFORM.                               " F_DISPLAY_DATA_VBAK*
    **       FORM USER_COMMAND                                             **
    *FORM user_command USING u_ucomm     TYPE sy-ucomm*
                            *us_selfield TYPE slis_selfield.     "#EC CALLED*
      *DATA:*
        *ls_vbak TYPE ty_vbak.*
      *CASE u_ucomm.*
        *WHEN '&IC1'.*
          *READ TABLE gt_vbak INDEX us_selfield-tabindex INTO ls_vbak.*
          *CHECK sy-subrc EQ 0.*
          *PERFORM f_read_data_vbap         " Read data from VBAP*
            *USING ls_vbak-vbeln.*
          *PERFORM f_display_data_vbap.*
      *ENDCASE.*
    *ENDFORM.                               " USER_COMMAND*
    **      Form  f_read_data_vbap*
    *FORM f_read_data_vbap USING u_vbeln TYPE vbeln_va.*
      *SELECT posnr matnr arktx kwmeng netwr*
        *INTO TABLE gt_vbap*
        *FROM vbap*
       *WHERE vbeln = u_vbeln.*
    *ENDFORM.                               " F_READ_DATA_VBAP*
    **      Form  f_display_data_vbap*
    *FORM f_display_data_vbap.*
      *DATA:*
        *ls_private  TYPE slis_data_caller_exit,*
        *ls_fieldcat TYPE slis_fieldcat_alv,*
        *lt_fieldcat TYPE slis_t_fieldcat_alv.*
    ** Build the field catalog*
      *m_fieldcat 'POSNR'  'VBAP'.*
      *m_fieldcat 'MATNR'  'VBAP'.*
      *m_fieldcat 'ARKTX'  'VBAP'.*
      *m_fieldcat 'KWMENG' 'VBAP'.*
      *m_fieldcat 'NETWR'  'VBAP'.*
      *ls_private-columnopt = c_x.          " Optimize width*
    ** Display items in a POPUP*
      *CALL FUNCTION 'REUSE_ALV_POPUP_TO_SELECT'*
        *EXPORTING*
          *i_selection = ' '*
          *i_tabname   = 'GT_VBAP'*
          *it_fieldcat = lt_fieldcat*
          *is_private  = ls_private*
        *TABLES*
          *t_outtab    = gt_vbap.*
    *ENDFORM.                               " F_DISPLAY_DATA_VBAP*
    ***************** END OF PROGRAM Z_ALV_GRID_AND_POPUP *******************
    reward if helpful
    raam

  • Calling another report from a report

    just wanna explore the possibility...
    i have a.bat which will call a.rep.
    in a.rep, a function will loop and call b.rep.
    is this possible?

    Hi KLC
    This is prasanth again. In reports we can call a report from another report which is called "drilleddown reports"
    If ur requirement is this one, then we can do this by using SRW builtin called srw.run_report.
    syntax is srw.run_report(reportname,<arguements if any)
    Place a push button in report 'a' and put this code in that button.
    I think this will solve your problem. I dont know exactly what requirement you have. Because for ur last question regarding distribution not clearly understood, so i suggestion is incorrect. any way i am trying to distribute the date based on sql model and i will suggesst you soon, Since i am also a developer,please try my suggestion but i am not sure that will work 100% correctly.
    thans and regards
    prasanth a.s.

  • Calling a report from a report in reports 10g !

    Which one is the most easist way of calling a report from a report in Reports 10 g ?
    Capri !

    Actually the scenario is that I have a report in which suppose a list of names is there. I want another report called on the basis of a name selected by passing that name_id as a parameter to the called report.
    In Reports 6i that is easily done by a BUTTON. But i am unable to find a solution here.
    Hope its clear now.
    Capri !

  • Problem while calling a report from the report

    Hi
    i want call a report from the report, i have written URL in the Hyperlink and its working
    but
    1) i want open it in the diffrent window.
    2) suppose if u have a report called emp it should call antoher 2 report at a time.
    ( how to put 2 URL in the hyperlink?).
    i,e if i press a hyperlink it should open emp1 and emp2
    Please help me.
    thanks and regards

    Thanx,
    I have solved this problem.
    Regards,
    Hafeez

Maybe you are looking for

  • Cinema Display 24" won't work with Mac Mini 3.1

    I recently purchased a refurbished Apple LED Cinema Display 24" from a buddy.  I'm pairing it with my used Mac Mini 3.1 (2009?). The display port mini connections seem to match.  The USB is plugged in.  The only cable unused is the "macbook power" pl

  • Need to update Exchange 2010 to SP1 from base

    I need to update my base install of Exchange 2010 to SP1 and eventually SP2. This sits on a 2008 R2 server. in reading other upgrade articles, there are references to needing hotfixes at the server level - 2008 R2. There are about 5 hot fixes referen

  • Download 8i Lite

    i have been trying to download 8i Lite for days and keep getting the user login error for FTP. Any clue if there is a problem on Oracle's end or mine? Thanks.

  • ACE design with inter-Vlan routing

    Hello all. I'm working on a design for a customer where the ACE will perform inter vlan routing. A few questions about that : - is routed traffic enforced in hardware with some kind of CEF-like mechanism ? (I suppose yes because there is a FIB ? per

  • Updating iWeb from a different computer

    I cannot find a way to access my iWeb editing pages from a different computer (work desktop vs laptop). Is it even possible? Is there a "file sharing/permissions" thing I need to establish? When I open iWeb on the "other" computer is there a way to a