Can I save MOV files to MPEG-2 Format?

Can I save my MOV files to MPEG-2 files? I bought the Pro version because it seems that almost no one I send MOV movies to has the player and I have to walk them through the setup. I was hoping the Pro version would help, but the only common format I can export to is AVI - which are very large files. I was hoping to exort to MPEG-2, but I only see MPEG-4 format, which I can't open in Windows Media Player 10 (even though it says it can.)
Can the Pro version do it, or should I have bought another program like ConvertMovie 2.1 instead?

QTPro cannot export mpeg-2 files on a Mac or PC. They do sell a mpeg2playbackcomponent that works in Windows or Mac but it will not export mpeg-2 format even if you buy QT Pro. Pro and the component will export mpeg2 to other video formats but will not export the soundfrom mpeg-2. Here is a FAQ link that mentions somemore those limitations.
http://www.apple.com/quicktime/mpeg2/faq.html
Since you do have Pro you may want to try this avi codec for QT. It is not as modern as some of the other QT codecs for .mov files but it does make reasonably good avi files that will play on a PC with no need for special playback software. Indeo5 for QT for Windows
One way to increase quality is to reduce the frame size to 320x240 and the FPS to 15 and then use the saved data space for increasing the datarate. I have made Indeo 5 videos in Windows98SE that look nearly as good as Sorenson3.

Similar Messages

How can I save .mov file as another .mov file after trim from Pre9?

I would have thought this would be simple. Just like I can crop a still image in Photoshop and save it with a new name (or the same name), I expected to be able to trim or split an .mov file in Premiere Elements 9 and save the resulting file(s) under a new name (or the same name) while preserving the same format.
But SIX hours later, NO.
Instead, after I split or trim the .mov file, it seems to be held hostage inside a project that won't let it go. I even tried "exporting" it but the choices are different than the properties of the source file (a BAD thing), and the resulting two files from the export are unreadable on my computer (USELESS).
The .mov file was shot with a Canon EOS Rebel T3i. Windows with Vista. Adobe Premiere Elements 9. I also have Photoshop CS5 Extended and Lightroom 3.4.x, if either of those would help.
I'm sure that I'm mistaken, There MUST be a secret menu option to SAVE-the-trimmed-CLIP-as-a-SOURCE-file.
How could there not be something this basic?

~ ~ ~ ~ ~ *** ~ ~ ~ ~ ~
Quoting Steve:
"I'll say it once more: It's impossible to cut a piece of video and then resave your file.....[because] IT'S [against] THE NATURE OF EDITING VIDEO WITH EVERY VIDEO EDITING SOFTWARE IN THE WORLD."
~ ~ ~ ~ ~ *** ~ ~ ~ ~ ~
I'm very pleased to say that I've found out how to do exactly what I wanted to do, despite Steve's strongly stated opinion that it is "impossible."
I can:
..... trim or split a video
..... and save it under the same name or a different name(s)
..... WITHOUT converting it to something else before or after trimming
..... WITHOUT changing it from its original format
..... WITHOUT exporting (compressing) it
..... WITHOUT "rendering" it different in any way except my desired length change (and resulting smaller file size)
This is desireable to me in order to:
..... save many gigs of space on my terabyte drives
..... while retaining source file footage that may be useful in future projects
..... IN ITS ORIGINAL (source) FORMAT !!!!!
YAY!!!
I got thinking about the software that came with my camera. I didn't install it because it included things like a program to handle RAW images (and I prefer to use Adobe Lightroom 3) and a program that I thought might be similar to Bridge (and I really like Adobe Bridge).
But I decided to install it and see if there was anything there that would allow me to work with the videos and sure enough, there it was - the ability to trim my videos of the junk while keeping the rest in original perfect format, just as it was shot. From a user's point of view, it is a precise video version of cropping a still image in Photoshop. EXACTLY what I wanted to do!!!
Here is a collage of the properties box of the "before" version (the original original), collaged together with the properties box of the "after" version (the trimmed original). The properties boxes are the properties as reported by Adobe Premiere Elements 9.
In the above-shown collage of the screenshots that I've made for you, you can see that nothing has changed in terms of the properties. The only changes are the length (because I cut it), the file size (because it is MUCH smaller now), and the name (because I wanted to preserve the original file in order to make a screenshot of its properties for you). I WANT TO REPEAT - the new CUT file is identical to the original, except the unwanted portion has been cropped away. It was NOT compressed, it was NOT rendered, it was NOT exported. It is a true source file utilizing original footage in its original format.
(This forum limits images to 450 pix wide so to see that all the relevant format properties are the same in both properties boxes, you may have to increase the size through your browser by holding down the [Ctrl] and hitting the "=" key (the one with the "+" above the "=" sign).)
~ ~ ~ ~ ~ *** ~ ~ ~ ~ ~
Here are the steps I took to make the screenshot above:
1 - Opened the original file in Canon ZoomBrowser EX 6.7 (which came with the camera).
2 - Trimmed ("cut") the file by placing a start point and stop point around the desirable footage.
3 - Saved under a different file name. (NOTE: This was a true save, NOT an export, NOT a "render" of some sort.)
4 - Switched to Adobe Premiere Elements 9 and started a new "project."
5 - Used "Get Media" to pull the original version and the cut version of the video into the project. NOTE: I pulled the cut version in first, so if there had been a format mismatch (as compared with the DSLR-1080p30 @29.97 setting I normally use when creating a new project), Premiere would have said so. But there was NOT a format mismatch. And it runs perfectly, just as it did before, including audio.
6 - Right clicked each video and took a screenshot of the properties of each to show you.
And this means I can use the trimmed footage for any purpose down the road, yet I didn't have to save the entire file which included unwanted footage. And I've saved a considerable amount of space on one of my terabyte drives.
SUMMARY:
Easy as pie:
I trimmed the excess off a video WITHOUT "converting," "exporting," "compressing," "rendering" or changing the format away from the original in any way.
No loss of any type of data whether audio or visual or "other." (Except, of course, the unwanted footage.)

Can I save a file created in CS5 format .ai version 7?

Hello
I use a software that interfaces between my pc and laser engraver machine. This software can import documents only in formats of AutoCAD and Adobe Illustrator version 7.0.
Currently I make my drawings with CorelDrawX3 and later export to .ai 7.
Now I want to update my software, but the new version of CorelDraw not allow me to export to 7.0. I can make the effort and pay Illustrator (and change my drawing habits), but ¿can I save as 7.0 in the latest version of Adobe Illustrator?
Thanks

The latest versions only have 10, (9), 8 and 3 as Save options. No version 7. Sorry.

How to save mov files on CD

I am using Windows XP with quicktime but I can not save mov files on CD. I donot mean to watch mov on VCD but save mov as data files to free my hard disk.
Thank you for your assistant

Thank you for your information. I take photos and movies from my digital camera, I can download photos (jpeg) & movies (mov) form SD card to harddisk and I can save photos from harddisk to CD. But if I insert any mov files on the list to be saved on CD, Windows say save fail at last second. Then I try Express Burn program and I get the same result (save fail). Please help

How can I convert .mov files for use with other apps?

When loading movies taken on a friend's digital camera to my PC, the video files were saved as Quicktime .mov files. I am now unable to pull those files into any other software program (I want to put them onto a CD or DVD and play on external players.) How can I convert .mov files to a .wmv or .avi or mpeg?
Thanks - J
RS720G Windows XP

Kodak Digital Camera QuickTime MOV Problems
After battling a number of serious problems with the videos taken by my new Kodak Digital Camera, I decided to write up this page so that anyone searching the web would find out the true answers without as much grief!
I’ve also made some other comments about my experience with the camera, in case anyone was considering buying a Kodak camera in the near future.
I bought the camera just before Christmas 2004 in the US. At the time of writing, it is a pretty good model for domestic use—about 5.2 megapixels, costing about US$400 (or AU$600 back here in Australia). From a company as reputable as Kodak, I expected no problems.
The first disappointing thing was that the spring inside the spring-loaded battery clip, inside the camera, came loose within days. It proved impossible to reattach it without completely dismantling the camera, which (despite my engineering qualifications) I was not willing to do. This would usually have been a warranty item, but Kodak’s warranty does not extend to other countries. I’ve since had to jam cardboard in to keep the battery clip engaged, and have taped the battery bay shut to avoid it opening accidentally when taking the camera out of the case. This works fine with the docking station (an extra AU$100!), but it means I can no longer charge the battery without the docking station (since you need to take it out to charge it). I was not impressed!
The camera takes good photos, and I have no complaint with that. The controls and camera menus are well-designed. The large display is excellent.
The EasyShare software is not as easy to use as it looks, has a habit of crashing, has a web update program that is always running in the background of Windows, and transferring images is nowhere as easy or quick as it should be. I’ve now uninstalled it completely, and simply copy the photos directly from the device. (If the camera memory is nearly full, and you just want to transfer the last few photos, then it’s impossible to use the EasyShare software to browse the camera’s photos without it actually downloading the whole lot through the USB cable—and it takes forever! Copying from the device directly doesn’t hit this bug.)
The capability to take video using the camera was a great attraction when I selected it, and, if it worked properly, it would make it quite a handy little camcorder in its own right. With a 512 MB memory card in it, over an hour of video can be recorded at Video-CD quality (320 x 240 24fps video, 8 kHz audio). It’s not full digital video, but it would still be a pretty good feature for a US$400 camera. If it worked.
The first disappointing thing about taking videos is that the optical zoom cannot be adjusted while the camera is recording. It can only be adjusted between video sequences. I don’t know why this restriction was made in the design.
The real problems, however, start when you try to do anything with the video clips captured by the camera. Kodak has chosen to capture the videos in QuickTime format. This is fine—QuickTime is, technically, excellent—except that there is no simple way to convert QuickTime MOV files to AVI or MPEG or VCD. The Kodak software comes with a QuickTime player, so you can see the video clips on the computer you installed the software on—and they look good. Problem is that you can’t just dump those MOV files onto your Video-CD creator (it will usually want AVI or MPEG files).
It takes some time to realise that Kodak have not even bothered to include any software with the camera that can convert these MOV files to a more useful format. This is a serious PR blunder, and anyone bitten by this is unlikely to go near the Kodak brand ever again.
After some web searching, owners of these cameras generally find that the best (only?) freeware solution to convert MOV to AVI is Bink and Smacker’s RADtools program.
RADtools is amazingly powerful for the price (i.e. free), but it hits two fundamental problems with Kodak Digital Camera MOV video files, that are the fault of the Kodak camera, not RADtools. (I know this because every other MOV converter hits the same problems—except one, as you will see below.)
The first problem is that the sound cannot be converted properly. When you convert any Kodak MOV files, there is an “aliasing” of the sound at the upper frequencies. This is a technical description—you get a whispery, tinny, C3PO type of echo to everything. It really destroys the quality of the video clips (especially bad when I am trying to capture priceless memories of my 4- and 7-year-old sons—I don’t want their voices destroyed for all time).
Every conversion program I tried ended up with the same audio problem. I concluded that it is something strange in the way the Kodak cameras store the MOV files.
Strangely enough, I noticed that the QuickTime player didn’t distort the audio like this. The audio sounds just fine through QuickTime. More on this shortly.
The second, more serious problem is that RADtools could not properly convert some of the video clips at all. (This problem only affected less than 10% of the clips I originally filmed, but most of those clips were very short—less than 20 seconds. It seems that the probability of this problem gets worse, the longer the clip.) RADtools would misreport the number of frames in the clip, and would stretch out a small number of frames of video (in slow motion) to match the length of the audio.
Again, I confirmed that this is a property of some of the MOV files stored by the camera. Other conversion tools also had problems with the same MOV clips.
After more angst, I found a number of websites in which frustrated owners of these Kodak cameras have reported the exact same problems.
It was only then that I discovered that QuickTime itself can convert MOV files to AVI. Believe it or not, it’s built into the QuickTime Player that Kodak supplies, or that you can download free from apple.com. The problem is that you can’t use it unless you pay Apple to upgrade to QuickTime Pro.
After realising that this would probably be the only way to get decent audio for these clips, I paid the AU$59 to Apple Australia to get the licence key that enables the extra “Pro” menu options in QuickTime.
Sure enough, you can “Export” any MOV file to a number of formats, including AVI. And guess what? The audio comes out fine!
So, the first piece of advice I can give is: pay Apple the US$29 (or whatever amount it is in your country) to upgrade QuickTime to QuickTime Pro.
From here, however, there are still a few snags to untangle.
The first is that the default settings for Exporting to AVI don’t give a great result. It defaults to the Cinepak codec, medium quality. This looks terrible compared to the original QuickTime movie. Even on maximum quality, that codec just doesn’t give good results.
I finally found that the best option is to use the Intel Indeo Video 4.4 codec, set on maximum quality. This creates AVI files that are 10 to 20 times larger than the original MOV files, but the quality is there. If (like me) you only want the AVI files so you can dump them into your Video-CD program, then you want to keep the quality as high as possible in this first step. The extra hard disk space is not really a concern. When your VCD program converts the AVI files to MPEG, it will compress them to the usual VCD size.
Now for the biggest snag: those problem MOV files are still a problem, even for QuickTime Pro. Unbelievably, these Kodak cameras are spitting out MOV files which have some sort of technical flaw in their data specifications. QuickTime is able to play them back fine—and that seems to be all that the Kodak engineers really checked. However, if QuickTime Pro tries to export them, then when the progress bar gets to the end, it never finishes. It just keeps going. If you check the output folder with Explorer, and keep hitting F5 to update the file listing, you can see the file getting bigger, and bigger, and bigger. It never stops.
That this happens even for QuickTime itself (the native format for these files) confirms that the problem is with the software built into these Kodak cameras. It would be nice it they issued a patch or a fix. I couldn’t find one.
Fortunately, there is a “workaround” for this problem. I found it when trolling the net trying to find solutions to all these problems. The workaround is to use QuickTime Pro’s cut and paste facility. Open the problem MOV file, then press Ctrl-A (the standard key combination for “select all”—in this case it selects the entire film clip, as you can see by the grey selection of frames at the bottom of the player). Then hit Ctrl-C (i.e. copy, which in this case copies all the frames, but not the incorrect data structure in the original MOV file). Now hit Ctrl-N (i.e. new, in this case a new MOV file or player). In this new player, press Ctrl-V (i.e. paste). Now you have a new version of the MOV file with the bad data structure exorcised. You can save this under a new name, but make sure you specify “Make movie self-contained”—otherwise, it will simply be a link to the original (bad) MOV file, which you are probably going to delete once you save the exorcised version. (You also cannot overwrite the original file, because it needs to access that to make the “self-contained” movie. You need to give it a slightly different name, save it “self-contained”, then delete the original and rename the new copy back to what you wanted it to be. A pain, I agree, but at least the **** thing works—finally!)
The exorcised MOV file can now be used to Export to AVI format. (I also keep all the MOV files on a separate CD, in case I want to reconvert them to a different format in the future. I figure it’s better keeping the exorcised ones than the haunted ones.)
So I hope that all this answers a few of your questions. No, you weren’t being incredibly stupid.

Can I save my files to a flash drive?

How can I save my files to a thumb drive?

Hi !@#$%^&*()_+ (I hear ya!),
Are you referring to files stored in your Acrobat.com online account? If so, you can log in to your account at https://cloud.acrobat.com/files and select the files that you want to download/save to a flash drive. By default, they should download to your Downloads folder. From there, you can move them on to a flash drive.
Best,
Sara

"Can't Save the File. Can't Print the File" error in Illustrato CS3

I get the error "CAN'T SAVE THE FILE. CAN'T PRINT THE FILE". In Illustrator CS3
According to adobe this is an issue of having more that 28 spot colors, so I went to the swatch palette and pulled the fly-out menu out and told it to remove any unused swatches which took me down to 6 spot colors, but I still get the error when trying to save it to EPS format, which is the format I have to have for the ripping program for the vinyl printer in my sign shop. Saving it in AI format causes no issues.
Is there still something I am missing?
Thanks
Roger

I appreciate your comment, I see what your saying.
However...my issue is...I am making a vehicle wrap on a full size van for a radio station and it consist of pictures of a clouds for the background with two pictures of music artist that are associated with the kind of music this station plays, then there is a big round logo of the radio station that involves three spot colors (Purple, white and one of which is technically the black "K" ribbon) along with the web address of the station but it is of the same colors of the radio station logo...then there is the corporate logo that utilizes another spot color (blue)so as you can see I need the spot colors that I'm using.
So just to make sure I'm clear...I can only have 28 different individual colors, even though I have photos involved in the rendering? How can I make that work because photos obviously have more than 28 colors in them. It doesn't make sense because you can do a live trace on something in literally hundreds of colors.
Would it help if I flattened the photo work from photoshop before I move it to Illustrator? The reason I ask is because when I go to save and choose EPS the next save dialogue that comes up...down at the bottom there is two exclamations that one says something about embedding fonts, which I'm not concerned about and the other is something about there is some artwork that needs flattening.
Please bear with me here cause I am definitely a newbie!! My boss threw to the wolves on this adventure and I am learning by reading and trial and error.
Thanks
Roger

QuickTime Player 10.1 no more includes the ability to save a movie file in the same format as the original movie after editing it? No, it doesn't!

Since upgraded to Lion, I have to wait for QuickTime Player 10.1 to "CONVERT" every file that I edited in it.
Yes, it might save some disk space for me.(Which is not always the case though.) But it also takes almost 10 times or more as it did when back on Snow Leopard with QuickTime Player 10.0 there I could save any file in the same format as the original movie WITH NO NEED TO CONVERT IT.
Now I have to wait like 10 minutes to delete just a few frames.(The time it takes depends upon the original size of that movie. The larger the longer.) And guess what? If you have two clips originally split up from a movie and sperately getting saved(converted actually) with a loooooooot of time, and you naively added one of them to the other's end and then saved the finished one. It converts AGAIN! Doing so back on Snow Leopard with QuickTime Player 10.0 only takes you even a few seconds only!
Seriously, are we eating Apple or dirt this time?

My existing movies are all the following types straight from FinalCut
Apple Intermediate Codec, 1920 × 1080, Millions
16-bit Integer (Little Endian), Stereo, 48.000 kHz
This particular movie is 6.66 Gb
The new Quicktime player in OS Mavericks converts these to the following format:
Apple ProRes 422, 1920 x 1080
Linear PCM, 16 bit little-endian signed integer, 2 channels, 48000 Hz
And a movie size of 6.48 Gb
It seems obvious from other forum posts this is a planned move so that everything is the "new mobile device" ready state/format. To use Marc Speth's post as material....
https://discussions.apple.com/message/23749558#23749558
this is probably about dumbing down desk top OS to that pf iPhones and iPads. This is not what I paid good money to own a Mac Book Pro for....
Today I rolled all the back to Snow Leopard. Really good move...... All those new features hey? I lost the ability to work in spaces and of course the whole Quicktime debacle.
The rolling back process was easy, restored from a point prior to installing Lion and Mavericks and the only issue was my iPhoto libraries. Thank my stars that I still had back ups that I had not converted yet.... viva la Mavericks...NOT. Apple can keep it.
Unsure if you are just venting or if there is supposed to be a question here. Basically, I assumed this to be Apple's idea of an improvement. That is, I really believe the ProRes 422 codec is a better intermediate codec than the AIC codec but most of my old HDV camcorder family tapes were imported by iMovie (for compatibility with my wife's non-FCP computer configuration) and, like your content, is/remains stored as AIC/PCM MOV files. At first I thought this might be a generalized change affecting all QT X based apps but when I went to check the latest iMovie v10.0 update, became confused when I noted that AIC source files were not automatically updated to ProRes 422 and continue to play natively in the iMovie source media viewer.
I guess this is supposed to be a logical evoluption and we were supposed to have seen the "handwriting on the wall" dating back to when Apple's first released the free ProRess "player" ProRes 422 codec. Still, it would have been nice if Apple had given some warning during the last few years so users could plan and prepare for such a drastic change. For the moment, I am just thankful that AIC remains, at least temporarily, supported nativelyby the iMovie video editor under Mavericks. Thank goodness for small favors.

Can't save movie captures to server...only to client

l have iMovie 11 (9.0) on a 10.6.8 client. I can't save movie clips to the server, but can save to the client. When I try to "File->Import from camera" (local iSight), then "capture", on the dialog that pops up I see "Save To:" with three shares:
1) "Mac HD" (local main partition),
2) "Data Store" (local data partition), and
3) "SERVER-USERDATA" (the main area on the server for network user data).
Share#1,2 show lots of gigs free, and I can save to these areas. (But I think I'll have a problem with network users if they log onto another machine, the clip won't be available.)
Share#3 shows 0gig free. But there is plenty of space on the server. If I try to save here, i get a dialog that says "... you may not have permissions to write to "/Network/Servers/rbserver.lan/SERVER-USERDATA/iMovieEvents.localized."
Where does it pull these sharepoints from? (SERVER-USERDATA is NOT a share of it's own, there are shares "under" it, like /server-userdata/students/...)
2 Questions:
1) any idea why it's not recognizing any free space on server share?
2) If I want to change the sharepoint that shows up for iMovie clip saving, where can I specify that? (on the client)

thanks Abhilash.
i've never configured pass-through html for the cr for enterprise viewers before but others have...please see this thread. you may wish to get this to work first before you get too far.
even if you don't use webelements and write your own embedded html & javascript, you need to activate pass-through html as that's the required feature. a simple test to see if you've got it to work is to create a formula to put on your report like the following and if the tags don't show up then your implimentation was successful.
'<DIV>this is a div</DIV>'
once that works, you can copy the syntax for the weautorefresh and create a formula based on that syntax and it should work in theory. however, the code for that function was written for the dhtml viewer for crystal reports and not the viewer for crystal reports for enterprise.
please do let us know how this part goes though.

HT3523 I can play an .mov file but cannot open it to move it to another drive/disc/etc. When we try to open it, we get a message that says "The movie file for "beanmine.mov" cannot be found. Without this file, the movie cannot play properly."

We can play a .mov file (a full-length film created in final cut pro) but cannot actually open it in QuickTime. We get the error message saying that a file is missing, and the movie can't play properly without the file. The thing is, we can play the film, we just can't open it to move it to another drive. Help?
Also, can the lost file (which was deleted) be recovered from a Mac HD or an external hard drive?
Help!

We can play a .mov file (a full-length film created in final cut pro) but cannot actually open it in QuickTime. We get the error message saying that a file is missing, and the movie can't play properly without the file. The thing is, we can play the film, we just can't open it to move it to another drive. Help?
Sounds like you created a "Reference" file here. I.e., a "Reference" file is a file that tells the player how to play the data contained in a "Resource" file. When you try to open the "Reference" file in the QT Player app, the first thing the player does is check to see if the "Resource" data file is is still available where it is supposed to be. (I.e., moving/deleting the resource file or moving reference file without moving the resource file to maintain the relative path between the two will generate the error message you mentioned.)
Also, can the lost file (which was deleted) be recovered from a Mac HD or an external hard drive?
That depends. Deleting a file does not actually erase the data immediately. Instead, the operating system just tells the system directory that the space containing the movie data is available for reuse if/when needed. As time passes, the chance that some of the data sectors will be re-written by other data continuously increases. To restore the file normally requires use of a special utility that both locates and restores all of the linked sectors containing the "deleted" movie data in their correct order. Other methods of restoring files would depend on the software you routinely have active on your system. For instance, do you use "TimeMachine?" or orther software that automatically backs up your data periodically? If so, then follow the instructions for your particular application to recover a deleted file.

How can I save a file from an email on an iPad to upload to my web based ap

I use my iPad in my business, I get emails sending me files that I then need to upload up to my Salesforce.com web based application. I can't see where I can either save the file to or pick the file up from ? Is there a way to do this or is at an iPad limitation ?

Hi,
What is the mail app that you use to read emails on your iPad? Is it Apple Mail?
Would you take a look at the Mail section of the following FAQ document to see if it answers your question?
How to open PDF documents in Adobe Reader for iOS (iPad on iOS 7 or 8 version)

I've doubled my RAM but still can't save big files in photoshop...

I have just upgraded my Ram from the shipped 4GB to 8GB but I still can't save big images in photoshop. It seems to have made no difference to the speed of general tasks and saving and I can't save big files in photoshop at all. I already moved massive amounts of files off my computer and onto my external hard drive, so there is much less in my computer now, and twice the RAM but it is making no noticeable difference. When I click memory, under 'about my mac' it shows that the RAM is installed and now has twice the memory. Could this be something to do with photoshop? I'm running CS6.

Also, I just calculated 220 cm into inches and this is roughly 86.5 inches. Over 7 feet in length.
WIth an image that large, you may want to consider down sampling to a lower DPI to help with being able to work on and process images of this size much easier and it will be easier for your Print house to process, as well.
You might want to consider working with these rather large images at 225 DPI instead of 300 if resolution at close distances is still a concern.
Or what you good try is working with the images at 300 DPI, but then save them/export them as a Jpeg image at the highest image quality setting.
I do a lot of project where I use a high resolution jpeg image to save on image proceesing overhead.
The final printed images still come out pretty clear, clean and crisp without having to process those large files at a print house or having to deal with using that full resolution image in a page layout or illustration program.

Infopath submit - how to hide - Save as dialog box - You can only save this file to the current site

HI,
I have a infopath form. In the submit options, i have used the below:
submit options -
sharepoint document library
Data connection - Sharepoint Library Submit
Doc library - lib location
File name: concat("User Info - ", ResourceName, "-", PersonalID)
Allow overwrite if file exists is checked.
When I try to save a record, I am getting a popup:
Save As:
You can only save this file to the current site
File Name: textbox
save location: doc lib.
save, cancel buttons.
How to override this save as option(save as option should not be shown to user), and save the file using the file name mentioned?
Thanks

Are you clicking "Save" when you're using the form or "Submit"??
You should be using "Submit" and it will ... submit your form to the document library with the file name you specified.
To disable the "Save" button, click on "File" then "Form Options". Under the "Filler Features" area you can uncheck the box beside "Save and Save As". Click OK then re-publish your form.

Can't open movie files in browser or email

Hi, I'm not sure if this issue has been dealt with yet; however, I can't open movie files contained in emails or in my Safari Browser--even ones labeled as QT files. I am running Quick Time 7.0.4 on my 10.3.9 eMac. This is a recent problem, as I didn't have this difficulty until the last month or so. I had unchecked the "Open Safe Files" box in Safari's preferences some time ago as a precaution against a virus/worm, but rechecked it after the last one or two Security Updates. What else should I do to resume opening movie files? QT Player runs just fine with movie trailers, etc, but not in mails or the browser.
eMac, iBook Mac OS X (10.3.9) 1 Ghz G4, 768 mb ram

Under the Safari Help menu choose "Installed Plug-ins". This will confirm your QuickTime install.
Under Safari Preferences/Security make sure you've got plug-ins enabled.
Try dragging the email attachment to the Desktop and see if it plays from there.

Hi, I have problem with importing MOV files from SJCAM 4000. MOV files are in supported formats for Adobe Premiere Elements 11. But if I'm importing MOV file, only audio part is imported, video part is not imported. How can I solve this problem?

Hi, I have problem with importing MOV files from SJCAM 4000. MOV files are in supported formats for Adobe Premiere Elements 11. But if I'm importing MOV file, only audio part is imported, video part is not imported. How can I solve this problem?

haben
From looking at the specifications of your camera (SJCam 4000), we know already what video compression your camera is using. It is H.264.
A H.264.mov file should be supported by Premiere Elements 11. On what computer operating system is your Premiere Elements 11 running?
Do you have the latest version of QuickTime installed on your computer? And, are you running QuickTime and Premiere Elements 11 from a
User Account with administrative privileges? Please go to Premiere Elements 11 Publish+Share/Computer/QuickTime to confirm that you find
presets there for the QuickTime choice there.
What are the properties of these H.264.mov files - is it 1080p30 (1920 x 1080p30) or something else? Do you know if this camera is recording with a variable or
a constant frame rate?
Please review and consider and then we will decide what next.
Thank you.
ATR

Can I save MOV files to MPEG-2 Format?

Similar Messages

Maybe you are looking for