Can i send and receive mms messages in my ipad ?
how i can send and receive mms messages in my ipad?
You should be able to do this through the iMessage app if the other person is connected through an apple device If not however there are plenty of apps on the app store that you would be able to use to send pics as long as the other user has a smart phone (does not have to be apple)... for example WhatsApp, Kik, Skype etc Hope that this helps!
Similar Messages
-
I can't send and receive MMS messages
Before I had my package, I was on my blackberry to mobicarte and when is mobicarte can not send mms, it is the rule. So I took a package, which includes sending SMS but also MMS. Except that my blackberry does not mail and do not receive. Is there a manipulation to solve this problem?
please.
Ps : sorry for my bad english, but i'm french.Hello weiliaivy08
Welcome to the Community
If you are having problem in sending MMS from your device have a look at this Knowledge Base it may help :KB13667 But please reconfirm with your Carrier that proper plan has been activated on your device.
Prince
Click " Like " if you want to Thank someone.
If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it.
Click " Like " if you want to Thank someone.
If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it. -
Why I can't send and receive MMS with Redpocket on the 4s,iOS 5.1.1?
Check Settings>Messages>MMS Messaging and make sure it's set to on. Contact Redpocket and make sure your account is provisioned correctly. However, if Redpocket is not a supported carrier, it is possible that not all functions of the iPhone will work or work as expected.
-
HT1355 Can you send and receive text messages in airplane mode?
Can you send and receive text messages while in airplane mode?
No. Regular SMS's require a cellular connection. However, iMessage will work in Airplane Mode, as all that requires is an Internet connection. You can turn WiFi back on while in Airplane Mode.
-
Can't send and receive text messages
Hello,
For around 2-3 weeks I can't send and receive text messages. When I try to text somebody, the message appears as "Not delivered". On the ! there are only 2 options: Try again and Cancel. If I choose to "Try again", the results is the same: the message is not delivered.
When somebody is trying to text me, the message appears as delivered on their phone, but does not reach mine.
Please advice
Regards
IrinaYes, I contact them and the problem was on their side. Now my problem is solved
-
Can I send and receive e-mails on my iPad through Verizon?
Can I send and receive e-mails on my Ipad (third generation) the same as I do on my iPhone 4s? Both are through Verizon. And if I can, where do I set it up at? Thanks.
Yes. Why couldn't you use the same email account?
Settings>Mail, Contacts, Calendars>Add Account>Other. Start there. -
Problem I-message? I can't send and receive the messages.
from last Sunday I have a problem with I-message. It's impossible to send and receive the messages. what's the problem?
I assume you have tried all of the troubleshooting here?
iOS: Troubleshooting Messages
It would also help to head to Settings -> General -> Date & Time and make sure it is set to Automatic. You could also try using Google's DNS servers as doing so has resolved the issue for a number of users. Head to Settings -> Wi-Fi and tap the > next to the network you are connected to. Scroll down to the DNS fields and enter in8.8.8.8and 8.8.4.4.
B-rock -
X3-02 Sending and receiving mms messages
I got this phone for xmas and having problems sending and receiving photos, please could someone explain what I need to set.
Thank youAlready solved the problem. On default, the phone will create a 3g/mms settings and will name it after the network operator. So if you'll open a browser or mail, it will ask you what connection you will use (WLAN/3G or GPRS).
It wont connect me to the internet when ill use that settings then ill choose the 3g/gprs.
Then if ill use my network operator's settings under settings>configuration, it wont let me use WLAN. It will automatically choose the 3g/gprs connection. (that will surely cost me)
can anyone tell me how to combine this settings?
The default got its x-midlet-[insert apps name here] and lots of other stuffs, while my network operator only got its web, multimedia and access point. -
How can I send and receive a message from a queue using standalone program
Hi,
I want to write a standalone Java program which has to post a message to a queue and receive a message from a queue thats specified as a replyto queue.I want to have my application to be completely standalone without the need of a Application server.What all the Jars do I need to include in the application.My aim is to have the application standalone and portable so that the application runs on any machine that has a JRE.
Thanks in advance,
PrathimaHi,
You can get quite simple standalone MQ Java programs from this site http://www.capitalware.biz/mq_code_java.html.
Also regarding the jars required for your application depends on the API being used. If you use MQI API few jars are required and if you decide to use JMS API you'll require few other jars. But you got to either install Websphere MQ Java Client, which will copy the jars to the respective location, or you can choose to copy the jars from some other machine manually.
Eventually, all the jars related to MQI and JMS API will reside under /usr/mqm/java/lib/ or /var/mqm/java/lib/ UNIX Environment. And in case of WINTEL, you should find the jars under C:\Program Files\IBM\WebSphere MQ\Java\lib.
Trust it clarifies...
Naren -
How can I send and receive a message as an SMS?
I just got an iPhone 4S, an it's completely updated. I can send iMessages just fine when I am connected to wifi at home. I can't send an SMS at all, Cellular data or wifi. It shows that it's sent as an SMS(it's green and it says it's sent), but the receiver never receives it. Apparently they can't send an SMS to me either. It shows on their phone that it's sent, but I never receive it. Do I have to have my cellular data turned on to recieve an SMS? Even with it on, it doesn't work.
Hi,
You can get quite simple standalone MQ Java programs from this site http://www.capitalware.biz/mq_code_java.html.
Also regarding the jars required for your application depends on the API being used. If you use MQI API few jars are required and if you decide to use JMS API you'll require few other jars. But you got to either install Websphere MQ Java Client, which will copy the jars to the respective location, or you can choose to copy the jars from some other machine manually.
Eventually, all the jars related to MQI and JMS API will reside under /usr/mqm/java/lib/ or /var/mqm/java/lib/ UNIX Environment. And in case of WINTEL, you should find the jars under C:\Program Files\IBM\WebSphere MQ\Java\lib.
Trust it clarifies...
Naren -
HT3529 How can i send and receive text messages with pictures?
The camera button on the text screen won't let me send pictures. And I also can't recieve pictures.
http://support.apple.com/kb/ts2755
-
If you cannot send and receive MMS messages and had an original iphone...
Call At&t to resolve it.
There is a known problem where At&ts system is still showing the iPhone as the original 2g which is not allowed to send MMS.
In my case customer service showed it as the 3g but tech support showed it as just iPhone (should be iPhone 3g). Tech support said it was a small group of customers that were effected.
Bottom line: If restore and reset and any other thing you've tried doesn't work, take 15 min and call At&t.SMS/MMS are carrier features so take it out with them.
We cannot help here. -
How can i get my iphone on straight talk to send and receive mms?
I have an iPhone 4 on straight talks network. I have never been able to send or receive mms messages to anyone other than a device with iMessage. How can I get it to work? I dont want to change to a Galaxy or any other kind of phone, but I will if this doesnt get figured out. Straight talk says its an issue with Apple products. Please help!!
Hey Jstugelmeyer,
First, I would go through these three steps:
Restart your device.
Update to the latest iOS Software.
If you are trying to send a message to multiple recipients and you type in each contact manually instead of using the contacts list, make sure you tap return instead of space to separate each one.
Then, if you still can't send or receive MMS messages:
To send and receive MMS messages on your iPhone, verify that your wireless carrier supports MMS2.
Ensure that MMS Messaging is turned on in Settings > Messages.
Verify that your phone is able to access cellular data.
Some carriers allow you to edit your APN (Access Point Name), which may prevent MMS from working.
If you are roaming outside your calling area, make sure you have Data Roaming turned on in Settings > General > Cellular to send or receive MMS content.
While on a phone call, you will be unable to send or receive MMS messages when using an EDGE, GPRS, or any CDMA cellular data network. After the phone call ends, you will receive any incoming messages. If you tried to send an MMS message, you may need to send it again.
If the issue persists and your wireless carrier has confirmed that your wireless account is provisioned2 for MMS, restore the iPhone.
via: iOS: Troubleshooting Messages
http://support.apple.com/kb/TS2755
Welcome to Apple Support Communities!
Best,
Delgadoh -
Sending AND Receiving Text Messages on PC through iPhone without jailbreaking
how can i send and receive text messages on my pc with my iphone number? i also would like these messages to still show up on my phone. i know if the phone is jailbroken, wifisms used to work. is there anything for non jailbroken phones?
Is there a checkmark by the phone number, or is it just grayed out? If there is no checkmark, then turn off iMessage, wait a moment and turn it back on. See if it activates. If so, then go to Send & Receive and you should see the checkmark. The phone picks up the number from your phone when it activates iMessage.
-
Suddenly I can't send or recieve i messages on my ipad...can anyone help?
Hi folks,
For some reason I can't send or receive i messages on my ipad. This has just happened within the last few weeks. I think I have checked everything I can, so would be open to suggestions.
The facility to upload photos to facebook has also stopped working.
Don't know if it's connected ?
ThanksYou must not be connected to wifi.
Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are drooping internet connection)
• Launch Settings app
• Tap on Wi-Fi
• Tap on the blue arrow of the Wi-Fi network that you connect to from the list
• In the window that opens, tap on the Renew Lease button
6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
~~~~~~~~~~~~~~~~~~~~~~~~~
Fix WiFi Issue for iOS 7
http://ipadnerds.com/fix-wifi-issue-ios-7/
iOS 6 Wifi Problems/Fixes
Wi-Fi Fix for iOS 6
https://discussions.apple.com/thread/4823738?tstart=240
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
iPad: Issues connecting to Wi-Fi networks
http://support.apple.com/kb/ts3304
How to Boost Your Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.h Mt
Troubleshooting a Weak Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Sig nal.htm
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
10 Ways to Boost Your Wireless Signal
http://www.pcmag.com/article2/0,2817,2372811,00.asp
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
Some Wi-Fi losses may stem from a problematic interaction between Wi-Fi and cellular data connections. Numerous users have found that turning off Cellular Data in Settings gets their Wi-Fi working again.
You may have many apps open which can possibly cause the slowdown and possibly the loss of wifi. In iOS 4-6 double tap your Home button & at the bottom of the screen you will see the icons of all open apps. Close those you are not using by pressing on an icon until all icons wiggle - then tap the minus sign. For iOS 7 users, there’s an easy way to see which apps are open in order to close them. By double-tapping the home button on your iPhone or iPad, the new multitasking feature in iOS 7 shows full page previews of all your open apps. Simply scroll horizontally to see all your apps, and close the apps with a simple flick towards the top of the screen.
Wi-Fi or Bluetooth settings grayed out or dim
http://support.apple.com/kb/TS1559
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
Cheers, Tom
Maybe you are looking for
-
I have an iPad 2, connecting via Wifi to an Actiontec Q1000 modem. The iMac (3.06 GHz Intel Core 2 Duo, 4 GB 1067 MHz RAM, running OS 10.8.2) is also hard wired to the same modem. Internet access is via CenturyLink. Main email is from Shaw cable i
-
Open a Dynamic URL from a Table column link
Hi, Jdev Version (11.1.1.6.0) I have requirement to open a dynamic URL from table column. Any time I click on link, it should generate dynamic URL based on column attribute and open in popup or browser. Can someone pls suggest how to achieve this. Th
-
HT4914 My wife uses a different apple ID than I do. Can she share my music?
We use multiple devices on iTunes and are interested in iTunes match. Can my wife use her own Apple ID and share the music I upload for iTunes match?
-
Oracle salesforce Adapter integration in SOA 11.7
I have implemented a scenario given in Chapter-5 of this pdf http://www.oracle.com/technetwork/middleware/adapters/documentation/ug-sfdcadapter-ps6-2104970.pdf I am facing an issue while invoking Salesforce Adapter. My composite has a bpel process wh
-
When queried v$dataguard_stats results no rows selected at standby db?
Hi Chaps, I have oracle database 10g 10.2.0.4.0 on AIX version 5.3 I am curious about standby database that whether it is in sync with the primary database or not? when I queried at standby to know dataguard stats the result was 'no rows selected' SE