Can I set up custom default printer profiles for different printers in mountain lion?

I have 2 printers connected to my Mac. An officejet and an Eltron label printer. I constantly need to manually change the default label printer size to print to the label printer or officejet. Is there a way to set it where all print jobs going to the label printer is 4x6? Sometimes, I forget and waste some labels to the eltron or send a job to my office jet and it prints a 4x6 image of the document on letter paper. Obviously its a bit of a hassle. If anyone has a trick for this or even third party software, please advise.

Andrew,
If i am clear with your requirement then You can achieve this by setting the value manually in PR.
OAMessageChoiceBean createMessageBean=(OAMessageChoiceBean)webBean.findChildRecursive("CreateEditIjp");
createMessageBean.setText(pageContext,"InitialValue");Regards,
Gyan

Similar Messages

  • How do I set the default print margins for ALL printers in mozilla.cfg

    How do I set the default print margins for ALL printers in mozilla.cfg, even ones that are not yet installed / connected to the computer?
    I'm trying to install firefox with MDT and apply certain print options, but the printers themselves are connected at a later stage so the print.printer_myprinterhere cannot be used.

    Best answer I could find: [https://mike.kaply.com/2012/03/16/customizing-firefox-autoconfig-files/#comment-132668]
    If you can figure out how to add the printer name, this can be used to lock the margins.

  • How can I set up the canon printer mf4380dn for macbook pro MD318

    I can not set up the canon printer mf4380dn for macbook pro MD318 even thought I set up the printing driver already. The printer usually work good for printing via windows laptop.
    I tried some way but error appear "unable to verify the printer on your network". I printing IP is available

    Upgrade your RAM to at least 4GB's.  Your machine can support 6GB's, but upgrade to 4GB's first. Regardless of what Apple says, you need at least 4GB's to run Lion properly.

  • Default Domain profiles for different OUs / departments - GPO ?

    Hi,
    i know there is only one default domain user profile possible.
    We are using Windows 2012 R2 and Windows 7/ 8.1 Clients.
    We would like to delegate a few OUs.
    How is the best way to handle delegation and different profiles ?
    Should we create only one default domain user profile without any sofware installed ?
    Next we save this profile in Netlogon ?
    And each department / different OU admin deploy his software ?
    Is it possible to control where will be use the default user profile ?
    Maybe by security filtering ?
    Is this the right way ?
    Thank you very much & best regards
    Andi

    Hi Andi,
    Based on your description, did you mean that want to set default domain user profile? From Darrell Gorter’s
    description in
    this thread, this option seems to be unsupported and known it have issues.
    Meanwhile, please refer to following article and check if can help you.
    A Better Way to Customize the Windows
    Default Profile
    Please Note: Since the web site is not hosted by Microsoft, the link may change without notice. Microsoft
    does not guarantee the accuracy of this information.
    If anything I misunderstand or any update, please don’t hesitate to let us know.
    Hope this helps.
    Best regards,
    Justin Gu

  • Need a good print manual for Mavericks and/or Mountain Lion

    I'm still a print guy even after using Macs for almost 20 years. I have currently have a copy of David Pogue's Mac OS X Leopard Edition of The Missing Manual and have found it quite helpful over the past seven years.  I recently have upgraded my Macs to a 21.5" iMac (summer 2013) running Mountain Lion and a MacBook Pro (January 2014) running Mavericks.  Would it be helpful to get Pogue's Missing Manual for Mavericks?
    I have not yet updated my iMac to Mavericks.  I'm a little leery of the "bugs" that folks say are present in Mavericks. As a matter of fact, I am leery of any Apple system updates. I had problems updating a 2007 iMac and more recently my iPad. But that's another story.
    How about Pogue's manual?

    Mavericks for Dummies is good too. OS X Mavericks For Dummies (For Dummies (Computer/Tech)): Bob LeVitus: 9781118691885: Amazon.com: Books
    Usually, though, all the info I need is already in the Help menu.
    For what it's worth, I haven't had any problems with Mavericks. Fast and flawless. Almost without exception, the problems people report on this discussion are from incompatible/old/bad third party software, in particular, the crapware twins, MacKeeper and CleanMyMac, and antivirus software.

  • When creating a custom default user profile for an image, I get the error "A keychain cannot be found to store "safari" when a new user logs in for the first time.

    My "profile" account works flawlessly with the exception of safari. I had copied the entire user template folder to the default location in OS X 10.10 and removed the entire keychain folder. However, whenever someone logs into the computer for the first time and opens Safari, they are greeted with the error message "A keychain cannot be found to store safari".

    If you've just changed your login password in Recovery mode, follow these instructions. Otherwise, see below.
    At some point, you may have reset your keychain to default in Keychain Access. That action would have caused your login keychain to be renamed.
    Back up all data before proceeding.
    In Keychain Access, delete the login keychain from the keychain list. Choose Delete References when prompted, not Delete References & Files.
    Triple-click anywhere in the line below on this page to select it, then copy the text to the Clipboard by pressing the key combination command-C:
    ~/Library/Keychains
    In the Finder, select
              Go ▹ Go to Folder...
    from the menu bar, paste into the box that opens (command-V), and press return. A folder will open. Rename the file "login.keychain" in that folder to something like "login-old.keychain". Rename the file "login_renamed_1.keychain" to "login.keychain". You can then close the folder.
    Back in Keychain Access, select 
              File ▹ Add Keychain...
    from the menu bar. Add back the file now named "login.keychain". If any of your needed keychain items are missing from it, also add back the file you named "login-old.keychain". I suggest you transfer any needed items from that keychain to the login keychain, then delete it. The transfers are made by drag-and-drop in Keychain Access. You'll need to enter your password for each item transferred.

  • Changing Default Print Quality for Photosmart Printers in Stand Alone mode

    Hello Everyone. I am using a group of Photosmart Printers in Stand Alone mode for events where I shoot and print on site. Although I have quite a few printers with me (6 total at a time), I prefer to have the printers print in "Normal" Print Quality Mode, instead of "Best". Images come out twice as fast, and because I have a disciplined shooting technique, I get "GREAT" results from the "Normal" setting. I and/or my assistant have to go to my "Preferences" to change my Print Quality everytime we prepare to print another batch of photos. Sometimes we have groups that will want 5 copies, and it simply takes FOREVER in Best mode, and really, although with a 5x Loupe I can tell the difference, My customers can't with their naked eye. Sometimes we forget to change the setting due to the pressure of the pace sometimes. OOPS!
    I am using the following Photosmart Printers: A516, A512v and the 335.
    As I stated, I don't use these with a computer, I drive them straight from CF Cards. I do have all the original software, if I need to use the computer to make some changes. Just tell me how. Manual says nothing about getting the setting to default to normal.
    Thank you so very much in advance.
    BLAYZE!

    Hello:
    One way of assuring high quality would be to export the photo to the desktop (at highest quality) and then print from there.
    In my own case, I find that when I occasionally print a photo from iPhoto, the quality is quite good.
    Barry

  • How can I sync a custom number of podcasts for different podcasts?

    I dislike the option that I have to choose a specific number of podcasts to sync, e.g. the 10 latest, 10 oldest unplayed, etc. And that I have to choose this specific number for ALL podcasts!
    How hard can it be to let me sync, for example, all episodes of podcast A, 20 most recent of podcast B, 10 oldest unplayed of podcast C, etc?! Just make a row next to each podcast with the settings, even if it's in 5-step increments.
    Do you know of a way to do this?
    If it's not possible, could you please listen, Apple?
    Message was edited by: Pellevinken
    Message was edited by: Pellevinken

    Import the songs into your iTunes Library.
    Use the Songs view, and display the Date Added column;
    Sort on the Date Added column, with the latest songs at the top of the list by clicking on the Date Added column so that the arrow points down:
    Now select all these recently added songs and untick them by right-clicking (in the blue-highlighted area) and selecting Untick Selection:
    Only the highlighted songs will be unticked.

  • How do I set the default startup sequence for iWork documents under mountain lion?

    I am frustrated when starting Pages under Mountain Lion (OSX 10.8.2). Instead of opening with the documents that I was working on when I closed the app, it opens with a standard "open" dialog box. I am forced to navigate through my folders and files or "create a new document" and then go to previously opened files. I would like Pages to open in the same status it was when I last used it, or if no files were open, to then automatically "create a new document" using the "Blank" template. In other words, how do I open Pages directly without the intervening dialog boxes?

    Open General preferences and uncheck these boxes:

  • Advice for Creating a Custom Default User Profile in Windows Enterprise 8/8.1 Preview

    Just after some advice on the Best way to create a custom Default User Profile for our Windows 8 Enterprise Image.
    We are also looking at the Windows 8.1 Enterprise preview so advice on creating a Default User profile for this would also be appreciated.
    My Requirements are listed below
    -Pinned Web sites that open in Windows 8 App style IE
    -Default Windows 8 pre-installed Apps
    -The Microsoft Lync Windows 8 Client from the App Store *I understand this would be tricky, not fussed though if it cant be done*
    -Customised Start screen layout
    I have tried the Copy Profile tag in the Unattend.xml and syspreped the machine, this did not work.
    I have tried using the new "Start Screen Layout" Group Policy object, this also did not work
    The Closest I can get was to setup a user profile, Backup the Default User profile, Rename the User I worked on to "Default", Clean up the temp folder, then navigate through the user registry and replaced any absolute profile paths with the %USERPROFILE%
    variable. This worked in terms of setting the layout of the start screen, but the Lync App was not present, and Windows 8 apps, eg Video, Music and IE, would crash when attempting to open them.
    I know I am doing something wrong, so any advice would be much appreciated.
    Thankyou

    Still not getting the results that I want, to recap I am trying to do the following.
    Create a Windows 8.1 Enterprise Standard Operating Environment (SOE) Image for laptop devices at our school. These devices will be in the Students hands 24/7 and will be joined to our Windows 2012 based domain.
    I am trying to create a custom Default user profile for the image so that when a student logs onto the Laptop for the first time they get a start screen that we have created.
    The start screen consists of Pre-installed Modern Apps, a modern app created by our Software team that is side-loaded, Office 2013 Applications, and most importantly Tiles for Websites such as our Learning Management System and Intranet Portal.
    Now to the issues
    I boot the target system into Audit mode, and setup the start screen accordingly. For the Websites,
    I open the websites in the IE11 Modern app and use the built in control to pin the site to the start screen. Everything goes and looks as expected.
    I then run sysprep with a custom unattend.xml with copyprofile inside it. Again everything runs as expected.
    Now when I create a new user on the system the custom start screen appears however the websites that were pinned are no longer on the start screen. BUT when I manually open the Modern IE11 app, navigate to the website and pin the site, The Tile now appears
    on the start screen in the location I put it.
    <Rant>
    Now this puts us in a situation where we can no longer deliver a Standard Operating environment for not just our managed laptops but also our labs where a student just wants to logon and get to work.
    Why as a Desktop and System Administrator, who manages a fleet of 300+ Desktops and 1000+ Laptops do I not have the full power to customise things they way I want them.
    Yes I am aware of the new Group Policy setting for deploying Start screen configurations, Doesn't work when Web sites are pinned
    Yes I am aware of AppsFolderLayout.bin, Doesn't work for Pinned sites.
    Do the links above to Microsoft TechNet articles explaining how to customise Start Screens help, No they do not.
    Finally I am aware that I can just create a shortcut to the websites and pin those, the issue is that this does not utilise the new Live Tile code that was introduced with IE11 and we plan to use these Tiles as another notification system for our staff and
    students.
    I will continue to work on this, if I manage to find a solution myself I will post the process, however if anyone in the community, or from Microsoft for that matter, has a proven solution to pinning websites to the default user profiles start screen, please
    post it.
    </Rant>
    Thankyou

  • MN05: setting the number of printer copies for the whole range of vendors

    Hi all,
    by t.code MN05 I can set the number of copies of the MM documents printed the FIRST TIME. I can do it for doc.type or vendor.
    I can't set the number of printer copies for the whole range of vendors. Should I do it for each one of them?
    Thanks
    Gandalf

    Unfortunately,
    setting for document type, it doesn't work for all range of vendors.
    Setting for document type, in the field "PartF" I've put in "OA". Could it depend on it?
    you do for document type and then it will cover all range of vendors.
    If you want prints for a specific vendor then set condition recrod for that vendor only.
    regards

  • How can I set up a default (pre-recorded) voicemail greeting on iphone 4s?

    How can I set up a default (pre-recorded) voicemail greeting on iphone 4s?i dont want a custom one with my voice i want the pre-recorded where a lady says my number . how do i get that?

    Voicemail is a cell phone carrier function.  Contact your carrier to see if they have this option.  If not, i'm sure you can download a sound file from the internet with a greeting and add your name.  Then play it back on you PC while holding your iPhone near the speaker when recording the greeting to voicemail.

  • How can I set up a default page in CS5-CC?

    How can I set up a default page in CS5-CC?

    Save or modify one of the presets here on Mac (windows similar location):
    HD\Users\(user name)\Library\Application Support\Adobe\Adobe Illustrator CS#\en_US\New Document Profiles
    When making a new document, choose the preset you saved.

  • How can I set firefox as default browser in citrix server, only for few groups. does -silent -setdefaultbrowser option working in latest version?

    How can I set firefox as default browser in citrix server, only for few groups. does -silent -setdefaultbrowser option working in latest version?

    I think so: [http://discussions.citrix.com/topic/330585-firefox-default-browser-for-all-users/]
    Can you also set the default programs in the Group Policy User Settings?
    Reference: [http://community.spiceworks.com/topic/884740-default-user-profile-in-citrix-environment]

  • How can I set up a preferred printer so I don't have to pick the printer each and every time I print something out?  At the moment, even immediately after printing one thing, it prompts me to pick a printer, which is very time consuming.

    How can I set up a preferred printer so I don't have to pick the printer each and every time I print something out?  At the moment, even immediately after printing one thing, it prompts me to pick a printer, which is very time consuming.

    Compass Health Systems wrote:
    How can I set up a preferred printer so I don't have to pick the printer each and every time I print something out?  At the moment, even immediately after printing one thing, it prompts me to pick a printer, which is very time consuming.
    No, there is not setting for a default printer.The system scans for available airprint printers each time you print.

Maybe you are looking for