Can I turn on shutter sound when taking a photo with iPad air 2

Can I turn on the shutter sound when taking a photo?

THere should be a button on the side by the volume buttons... Slide it down so it has a little red piece showing and it should silent the shutter button

Similar Messages

  • When taking a picture with IPad. Camera my recipients always receive the photo upside down. WHY?

    When taking a photo with my IPad, then sending it, my recipients always the phot upside down.  WHY?   Help Please.

    I think that this is a philosophical question. I, for one, hold my iPad in landscape mode with the Home button on the right-hand side and in portrait mode the Home button is on the bottom.
    Anyway, you're welcome!

  • Silence shutter sound when taking picture?

    Hello all,
    I was curious to know if there was a way to silence the shutter sound effect when taking a picture during an ichat session. That is, so that neither I, nor the person on the opposite side, can hear it. Also, if there is a way to turn off this sound effect when taking full screenshots, please let me know. I use this feature a lot when designing presentations, and hearing this noise over my music is driving me absolutely insane.
    Thanks!!

    Hi,
    Not simply is the short answer.
    Possibles.
    Go to System Preferences > Sound > Sound Effects
    Turn the volume down for Alerts (iChat sounds are played as if they were System Alerts).
    iTunes has it's own volume where you can adjust it to be louder of softer compared to the Master Volume setting (and therefore louder than the Alerts)
    Deeper method for iChat.
    Right/Control Click the app in Applications.
    USe the Show Contents item
    Open Contents
    Open Resources.
    Change name of Shutter sound.
    It will now not play in iChat.
    Using the Keyboard to take Screen shots invokes a sound I have not looked for (it is not associated with the Grab App in Applications/Utilities than can turn the sound Off)
    9:37 PM Thursday; May 13, 2010
    Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"

  • Turn of click sound when taking a picture

    I have a BB Tour 9630.  Is it possible to disable the clicking shutter sound the camera makes when you take a pic?

    There is nothing natively on the device that will do that.
    There are a couple of 3rd party apps that do, though.  One is called BerryAnnoying and *I think* QuickLaunch will do it but don't quote me on that one. 
    1. Please thank those who help you by clicking the "Like" button at the bottom of the post that helped you.
    2. If your issue has been solved, please resolve it by marking the post "Solution?" which solved it for you!

  • How can i turn of the sound when you open a new tab?

    What is happening since today:
    Every time I open a new tab and it's done loading it gives a short "bloink" or whatever to call it.
    How do I turn it off?
    Thanks in advance for any tip you guys can give me.
    xxx

    That must be coming from the Windows operating system, as Firefox has one sound by default - for Type Ahead Find / Find As You Type.
    Unless you have an extension installed that added that sound feature, check Sounds and Audio Devices in the Win 7 Control Panel.

  • Hi, I upgraded to iOS 7 on both my 4s and iPad.. But I don't have the flash symbol to turn the flash on when taking night photos. Can someone advise me please? Thanks.

    I recently upgraded both my 4s and iPad to to new iOS 7. Now when I use either camera I can't take night photos. I did look into other forums and one said that there is a lightning bolt in the pure left hand side of the 4s...not on mine!
    Can someone advise what I can do? Thank you.

    Check out the image here. Top left corner.

  • Is there a app to turn off shutter sound

    I know you can not turn the shutter sound off on the 4s iphone but is there a app that can?

    I don't think the mute switch will mute the shutter sound on phones sold in countries where it is illegal to disable the camera sound. The mute switch is input to the operating system; it does not physically turn off the speaker. Which is why you will still get alarms when the phone is muted.

  • How to turn off sound when taking a video

    How to turn off sound when taking a video

    debrafromusa,
    This would be an extremely bad idea, the start up tone is there for a reason. It tells you when your system is attempting to  boot, it is also necessary in the even resets like a PRAM reset are done. There is software to mask the sound however as stated it is a very poor idea.
    Also, why turn it off. Why not simply put the display to sleep when the machine is not in use. You can easily do that in System Preferences - Energy Saver

  • How can I turn off the sound from the original midi  or audio tracks when I turned on the duplicate tracks for editing ?

    How can I turn off the sound from the original midi or audio tracks when I edit or listen to the duplicate tracks in Logic Pro 9 ?
    I'm using iMac desktop with Mac OS X Version 10.7.3. Pls advise.

    Dan,
    It sounds like one of your preferences has changed.
    Go to preferences > audio > general, and make sure "track mute/solo" is set to "CPU saving (slow response)". It is probably set to "Fast " at the moment.
    This setting (fast) basically causes immediate muting from the channel strip while your song is in play. This is because the audio is still being read from the hard drive, but the channel strip is simply muted.... like a hardware mixer. When set to "CPU saving", the audio from that track, when muted, is actually stopped from streaming from the hard drive, but there is a couple second delay before the audio is actually muted.
    One would think that the fast setting is generally preferable, except when you need to do what you are doing. The only way to keep duplicate copies of channel strips acting independent of one another is to leave this setting on the "CPU saving" setting.
    Hope that helps

  • How can I turn off the volume when I turning on my computer?

    Hi,
    how can I turn off the volume when my imac is turn on? later if i use it to listens music or whatever I can turn it on manually
    I don't want to sound that indicates the computer is on
    thanks
    adaltam

    Hello:
    Simply hit the mute key on your keyboard (found over the F10 key).
    Barry

  • Help me  My iPhone is in recovery mode and I do not see it on my laptop and on iTunes. Moreover, I can not turn it off and when I try it comes up all the time in the recovery mode.

    help me
    My iPhone is in recovery mode and I do not see it on my laptop and on iTunes. Moreover, I can not turn it off and when I try it comes up all the time in the recovery mode.

    Hey Yan Heng,
    Thanks for the question. It sounds like your iOS device is not recognized in iTunes for Windows, while in recovery mode. The following resource may help to resolve your issue. While you should run through each step, the specific information related to your symptom is outlined in Step 5 (If the device is not recognized while in Recovery Mode).
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    Thanks,
    Matt M.

  • When taking a picture with home button and sleep button can you get rid of the tool and task bar??

    When taking a picture with home and sleep button can you get rid of the tool and task bar?? (the search bars)

    No, but you can use any picture editing tool to crop out the bars.  (Many are free in the App Store.)  Me personally, I use PhotoPad, which I use to crop as well as rotate the screen shot.  Takes less than a minute to do both with PhotoPad.

  • My new macbook pro 13" just died and i can not turn it on. When i connect the power cort it also does nor charge. No light is commong on. I was working on battery power when it died and the battery was fully charged. What is the problem?

    My new macbook pro 13" just died and i can not turn it on. When i connect the power cort it also does nor charge. No light is commong on. I was working on battery power when it died and the battery was fully charged. What is the problem?

    Take it back to the Apple Store for repair since it's still in warranty.

  • I have read the thread about turning off dialpad sounds when calling a number. I used to always be able to do this on my 4S but not so since the latest software on the 5. Keyboard clicks are turned off and still have dialpad sound. I've NEVER had to mute.

    I have read the thread about turning off dialpad sounds when calling a number. I used to always be able to do this on my 4S but not so since the latest software on the 5. Keyboard clicks are turned off and still have dialpad sound. I've NEVER had to mute to dial before.

    I really do not think it is the iPad or your network connection. Other users have reported this very same issue. Try this and see if it works for you - it may not work - but it's easy to try - harmless - and it has worked in the past for others.
    Try signing out of your account and restart your iPad.
    Go to Settings>Store>Apple ID and tap the ID and sign out. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button. Go back to Settings>Store> Apple ID and sign in again.

  • How can I turn off computer screen, when mirroring to apple tv?

    How can I turn off computer screen, when mirroring to apple tv?
    Thanks.

    Welcome to the Apple Community.
    You can't. Mirroring is just what it says, it mirrors exactly what is on your computer screen, if there is nothing on your computer screen, that's what you will see on your TV screen.

Maybe you are looking for

  • ITunes 12: use 'Artist' name in "Artists view" rather than 'Album Artist'?

    I.e. if I have an album with artist name X and album artist name Y it seems to sort by Y (the album artist name) in "Artists" view (i.e. the one with the pictures on the left)-is there a way to make it use the artist name (X) instead? Say artist is "

  • Product upload to R/3. (field z mapping to field standar)

    Hi experts, I have a problem and i dont know how to solve it. I am uploading products from CRM to R/3. First I do a job calling a report based in a standar function: COM_PRODUCT_API_UPLOAD. This works perfectly, all the products i am uploading I can

  • How this query executing internally

    Dear All, This query picks the nth highest paid employee details, we can acheive this by rank or desnse_rank functions also But those execution is easily understandable.But Iam not able to understand , how this below correlated subquery executing int

  • To run a tcl script in ombplus

    how do i run a script in ombplus when i give a command ompplus.bat test.tcl the script doesnt run. it is given in a doc that in INTERACTIVE SHELL the SOURCE should be set as test.tcl and then ombplus.bat test.tcl command should be given in the ombplu

  • 3.0 .avi problems

    I've been working on a project for sometime, and until yesterday, everything worked fine. Now, all of the .avi files in the project can't be found (though they've never been moved), and when I reimport them, they are only found as audio files. I've u