Can I use a dll created in Visual Basic 2010?

I am reading up on the new extention system for air 3.0.
I have successfully (I think) managed to integrate the Air 3.0 prerelease into Flash CS5.5 (I don't use flex or flash builder)
So now I am trying to read up and learn how to use extentions.
Now, I don't know C/C++. My experience with it has been very limited over the years. But I know visual basic pretty well as I have been using that since VB4. (back in the programming stone age, heh)
Right now, I have Visual Studio 2010 and Flash CS5.5.
I am developing for the iPhone and iPad and up until now I have created a working iOS application that works pretty well.
Can I create a dll in visual basic (A class library) and then use the extention system to load that into my application to run on the iOS mobile device?

I thought I'd seen this question asked somewhere before, but I can't find the thread. In theory there should be no problem. However, you'll need to have both the LabVIEW 5.1 and LabVIEW 8.6 run-time engines installed, and I don't know if there are any operating systems on which both of those versions are supported. If the run-time engine is properly installed, then calling a LabVIEW-built DLL is just like calling any other DLL. There might be some special optimization if the calling application and DLL both use the same version of the run-time engine.

Similar Messages

LabView TEDS library into DLL or ActiveX Control so that I can use it in C or Visual Basic?

We are developing software in LabWindows/CVI and Microsoft C. I heard that LabView can generate DLLs. Can I turn LabView TEDS library into DLL or ActiveX Control so that I can use it in C or Visual Basic development environment?

Technically what you are proposing is possible with LabVIEW. With LabVIEW's application builder, VIs can be built into dlls. Also, LV has ActiveX hooks and so you could create a system for calling into it from CVI. However, this is not what I would recommend.
The LabVIEW VIs have been written to a preliminary version of the IEEE specification (1451.4) that describes the TEDS data which is primarily why I'm advising you against using them. Once the IEEE spec is approved (the current timeline is currently late March), it will become public and you can write your own code according to the specification (or wait for someone else to write it). To help you get started, the spec includes flex and bison code that describes the syntax and structure of the template files
Internally, we've written some C, C++ and Java code to the preliminary version of the spec and we've found that we can duplicate the functionality of the TEDS Library for LV in roughly 2 weeks in any other language.

How can I use sdk to create a dll?

I would like to extract text with it's coordinates using Acrobat SDK (I think I can use PDEdit API).
Can I use my plug-in like a dll?
I want to use it from the external application.
Thank you.
Tanya

How can I use java to create a shortcut on a surfers
desktop?
A surfer clicks on a link and it creates a shortcut
back to a certain website and/or a shortcut is created
on load
thanks
You have to sign your applet to create files... and thank god too. I hate it when web pages add shiite to my desktop.

How to use the dll created by c++ but not write a jni wrapper around

how to use the dll created by c++ but not write a jni wrapper around through a java program. now I can't access that dll like this directly from java.

Your question is unclear. (You haven't said what dll you are talking about.)
But:
If you are talking about an existing dll, then the only alternative to writing a wrapper is to use one of the wrapper generators floating around. Do a search on JACE.
If you are talking about a dll you are writing, then run jah and get the interface to match java right away; then you won't have to write a wrapper.

Can't use function in creating record group

Gurus,
This question is for developers. Is this true one can't use
function in creating record group. I am using form5.
thanks,
ZW

I figured out the issue... they changed the way Group Calls are limited.
Here's a full explaination - and a suggestion for a behavior fix: http://community.skype.com/t5/Windows-desktop-client/Please-Fix-Group-Video-Voice-Calling-Limit-Beha...
Long story short, you can't do a video calling at all if the group has more than 10 people in it total (including you).
Also, you can't do voice calling in groups with more than 25 people.
Text chats are limited to 300 people (or so I've been told by Skype employees). I've been in a chat with over 100 participants though so I know it goes that high at least.

How can I use forms to create a printable document or an html page?

This question may be a little confusing, so below is a link to an example of what I want to create using Dreamweaver.
http://www.howard.edu/technology/info/web/hosting/request/default.htm
On this webpage, the user is asked to fill in the forms with their info and when they press "view printable form", a html page using the info that was inputted is created for the user to print and sign.
So, I basically want to create the exact same thing in Dreamweaver - any suggestions? Any help is greatly appreciated.
Thanks in advance.
Jonathan

How can I use java to create a shortcut on a surfers
desktop?
A surfer clicks on a link and it creates a shortcut
back to a certain website and/or a shortcut is created
on load
thanks
You have to sign your applet to create files... and thank god too. I hate it when web pages add shiite to my desktop.

Can i use visual basic 2010 console mode or later versions on a macbook?

hello. i want to buy a macbook but i am taking computer classes that require visual basic 2010 console mode or later versions. Can i use this on a macbook or does it work only on windows' laptops?

Sometimes they do work - i've done it before. I have a late 2008 Macbook Uni and used the install dvd of my 2009 Macbook White and it worked.
Why not just clone your hard drive? It'll save you a lot of time doing a clone rather than doing a clean install.
Unless you're having issues with your old set up or your old hard drive is dead.
You can download Carbon Copy Cloner - install your new hard drive in a external usb enclosure (around $10) and clone fromt here then test it before you install it in your Macbook.
Once you've done the swap, you can install your old hard drive in the USB enclosure and use it as a backup drive.
Good luck

Witch version oepe-all-in-one-juno can I use to do create osb configuration

witch version oepe-all-in-one-juno can I use to do create osb configuration project ?
I use ubuntu 12.04 64

You can check all these out via the Web Part Maintenance Page. After the PageName.aspx, add ?contents=1 and you'll get a list of the webparts that are open and published on the page.
You can't do too much here but you can reset the parts that you think might be causing the problems.
Steven Andrews
SharePoint Business Analyst: LiveNation Entertainment
Blog: baron72.wordpress.com
Twitter: Follow @backpackerd00d
My Wiki Articles:
CodePlex Corner Series
Please remember to mark your question as "answered" if this solves (or helps) your problem.

Can i use AcroRd32.dll to get Object of AcroApp

Hi all,
Can i use AcroRd32.dll to get Object of AcroApp. I don't want to use acrobat professional.
My code is :
Dim objAcroApp As Acrobat.AcroApp
Dim objAXDoc As Acrobat.AcroAXDoc
Dim objAVDoc As Acrobat.AcroAVDoc
Set objAXDoc = CreateObject("AcroExch.Document")
Set objAcroApp = objAXDoc.Application
(I have taken refernce to Adobe 7.0 type library in my VB application)
But the last line is giving me error (Object doesn't support this action)
Plz help me.
Many Thanks,
Nitin

Hi all,
Can i use AcroRd32.dll to get Object of AcroApp. I don't want to use acrobat professional.
My code is :
Dim objAcroApp As Acrobat.AcroApp
Dim objAXDoc As Acrobat.AcroAXDoc
Dim objAVDoc As Acrobat.AcroAVDoc
Set objAXDoc = CreateObject("AcroExch.Document")
Set objAcroApp = objAXDoc.Application
(I have taken refernce to Adobe 7.0 type library in my VB application)
But the last line is giving me error (Object doesn't support this action)
Plz help me.
Many Thanks,
Nitin

Can i use APNS certificates created by the "Apple push certificates portal" to send regular push notifications to my iphone app (not MDM related)?

Can i use APNS certificates created by the "Apple push certificates portal" to send regular push notifications to my iphone app (not MDM related)?
The push notifications are sent from servers of my customers and i don't want to give them my own push cert (with the private key)

As KiltedTim mentioned you should be "good to go" in a couple weeks when IOS 8.0 is released to the public for your iPad. Here's more info. Scroll down to the "Send any kind of text message from any of your devices" section:
https://www.apple.com/ios/ios8/continuity/

OAM with OVD SSL , can I use openSSL to create certificate

OAM with OVD SSL , can I use openSSL to create certificate . In the doc, it use miscrosoft cert server . But I want to use openssl , but not success. Does anyone success to do?

OAM with OVD SSL , can I use openSSL to create certificate . In the doc, it use miscrosoft cert server . But I want to use openssl , but not success. Does anyone success to do?

Can WEBUTIL_C_API call dll coded in visual basic

Hi all
I wonder if WEBUTIL_C_API supports calling methods in a dll coded in Visual Basic? Or it only supports C, C++ and Visual C++?
Thank you

Hi
I am wondering because in webutil documentation I found this:
The WebUtil_C_API is a comprehensive API which allows you to call into C libraries on the client. The API only supports Win32 Clients.
Thank you

Using Crystal Reports in Visual Basic 2010

I am trying to add several Crystal Reports to a new project and having a major problem. Here's the situation. I created a new Visual Basic 2010 project with only one form, In visual Basic I added Crystal Reports.   I then imported a form that was created in Crystal Reports 8.5.
There were no errors and the report with valid data was visible. I then tried to run...it wouldn't run and 31 errors appeared.
Obviously I missed something. I have searched for a very simple basic tutorial and either can't find one or didn't recognize one.
Can anyone point me in the right direction.
Milt

Ok. So, you added the report to the project. Now we have to add the CR assemblies to the project, add the viewer (if need be) and fire it off. Simplest code would be:
Public Sub New()
        ' This call is required by the designer.
        InitializeComponent()
        ' Add any initialization after the InitializeComponent() call.
        CrystalReportViewer1.ReportSource = ("path to report")
    End Sub
In this case you are using the viewer SDK to runt he report. The report will prompt for any logon parameters - but you can code these also. You can load the report via the engine as bellow. Again, the report will prompt. I prefer to use the engine as it is way more "extensible"...
Public Sub New()
        ' This call is required by the designer.
        InitializeComponent()
        ' Add any initialization after the InitializeComponent() call.
        Dim crReportDocument As New CrystalDecisions.CrystalReports.Engine.ReportDocument()
        crReportDocument.Load("path to report")
        'Bind the report to the viewer
        CrystalReportViewer1.ReportSource = crReportDocument
    End Sub
If you have a report added to the project (strongly typed) the code would be:
CrystalReportViewer1.ReportSource = New myReport()
For more details, I'd recommend looking at the sample app vbnet_win_simplepreviewreport.zip available from the following location:
https://wiki.sdn.sap.com/wiki/display/BOBJ/CrystalReportsfor.NETSDK+Samples
The developer help files are here:
[SAP Crystal Reports .NET SDK Developer Guide|http://help.sap.com/businessobject/product_guides/sapCRVS2010/en/crnet_dg_2010_en.zip]
[SAP Crystal Reports .NET API Guide|http://help.sap.com/businessobject/product_guides/sapCRVS2010/en/crnet_api_2010_en.zip]
- Ludek

I want to install a new hard drive on my 2008 MacBook but do not have the instillation discs that came with my computer. Can I use instillation discs from a 2009 or 2010 MacBook?

I want to install a new hard drive on my 2008 MacBook but do not have the instillation discs that came with my computer. Can I use instillation discs from a 2009 or 2010 MacBook? The hard drive I am planning to install is a WD Scorpio Black 500GB SATA 2.5'' internal hard drive.

Sometimes they do work - i've done it before. I have a late 2008 Macbook Uni and used the install dvd of my 2009 Macbook White and it worked.
Why not just clone your hard drive? It'll save you a lot of time doing a clone rather than doing a clean install.
Unless you're having issues with your old set up or your old hard drive is dead.
You can download Carbon Copy Cloner - install your new hard drive in a external usb enclosure (around $10) and clone fromt here then test it before you install it in your Macbook.
Once you've done the swap, you can install your old hard drive in the USB enclosure and use it as a backup drive.
Good luck

How to connect to oracle database from visual basic 2010 express edition

I have installed visual basic 2010 express edition on windows xp. But visual basic 2010 express edition supports Microsoft sql server database file,Microsoft sql server compact 3.5, Microsoft access database file. I want to connect to oracle database from visual basic 2010 express edition. So what drivers are required and how to do connectivity?

Hello,
I wasn't clear on what you were using to make the connection. I had a look in Visual Studio 2010 (don't have express to test sorry).
I think you mean the Data Sources available under the menu Data-> Datasources. this seems to match the description you give when I
look at the list of datasource options.
In here you can make ODBC connections via the Microsoft .net Data Provider .
If you select ODBC as a datasource you can see listed the DSN's you created - for example I see 2 which use the Oracle ODBC driver.
This assumes you installed an Oracle Client + the oracle version of the ODBC driver (comes with the oracle client).
Once you created a server connection then you should see it in the server explorer.
You can also download the Oracle Developer Tools for Visual Studio which is an add on for VS.
** I suspect this is only for VS 2010 and I didn't see that Express was supported.
http://www.oracle.com/technetwork/developer-tools/visual-studio/overview/index-097110.html
Let me know if that helps.
John

Can I use a dll created in Visual Basic 2010?

Similar Messages

Maybe you are looking for