Can I use conditional formatting in OWA?

Can I use conditional forwarding for emails in OWA. I would like to set up rules in OWA that will allow certain messages to change their display upon receipt.

Hi,
Based on my knowledge, I'm afraid that we can't do it via OWA. You need to setup the conditional formatting on Outlook. Here is the steps for your reference.
On the View tab, in the Current View group, click View Settings, and then click Conditional Formatting. Click Add to create a conditional formatting rule.
For more information, here is a blog for your reference.
Conditional Formatting: Highlight your most important mails
http://blogs.office.com/2012/05/10/conditional-formatting-highlight-your-most-important-mails/
Hope it helps.
Best regards,
Amy
Amy Wang
TechNet Community Support

Similar Messages

Find missing data using conditional formatting?

Hello,
I'm familiar with Excel but new to Numbers.
Can I use conditional formatting to find the blank cells in a table?
If so, how?
If not, what would be the best way to find blank cells in a large table?
Thanks

Jerry's suggestion in that thread was:
Designate a blank cell to be your comparison for the conditional format and set a fill color to be present whenever your data cells are "Equal To" the content of the blank cell that you have designated. Then when you enter data, the fill color will revert to what it was for the rest of the table.
The problem with that method was that zero values and blank cells both triggered the conditional formatting. Badunit chimed in with:
Use "text is" instead of "equal to".
Which solved that problem.
Here's an example, using the conditional formatting rule incorporating the revised suggestion:
The conditional format rule shown is applied to all of the cells in column B.
Regards,
Barry

Can you transfer data from one numbers spreadsheet to another using conditional formatting?

I have a tracker document set up for client payments and when I indicate payment received, it flags green using conditional formatting. However I would like these to automatically transfer to another sheet - without having to cut and paste the associated data to the other sheet. Can I set up conditional formatting to do this? If not how could I get and automatic transfer?
thanks forum.

Hi Kangers,
There are a number of ways to transfer data from one table to the next. It should not be hard to set up.
Conditional formatting would not be involved it moving the data but you could set it up to flag the data in the new table.
Without knowing what your tables and data look like it is hard to propose a solution.
quinn

How do i use conditional formatting to edit the color of other selected other cells?

I have been playing around with the conditional formatting feature of Numbers, I have figured out how to change font and background color of the cell i am working with.
However what i am looking to do is apply a background color formatting to another cell (i.e. F2) if conditions are met in (B2).
the end game is this,
I want to make a column of check boxes, and using contional formating i want adject cells to change color (I.e. the example above: if (B2) is a check box, then when unchecked the reffered Cell (F2) does nothing, but when check the color of (F2) changes)
I can make this happen with Logic equations, the give (i.e. F2) some letter or number value, then using conditional formats i can have the color change. but this leaves that particular cell useless to me (i.e. F2) I am not free to enter or edit text in that cell. (i.e. =IF(B2=TRUE,"Paid","Due") ----> then add a conditional statement that chages color when the value is either "Paid" or "Due")
How do i have F2 change color, when B2 is checked and still retain the ability to enter information (or potential have another formula) in F2? (The Cell is not used up by "Paid" or "Due" it is editable just like any other cell)
is there anyway to change cell characteristics like font, color, and background color inside a formula, because in that way i would be able build it manually
i tried using the formula editor inside the conditional format pane, but the only infor it will allow me to retain is one partictular cell. i cannot add modifiers like "+" or "=" or anything else. what is that space used for then?
thanks for anyones help

MC,
You can do what you want in Numbers. It requires an auxiliary column and it's a bit tedious to set up because conditional formatting by comparison to another cell isn't relative, so each cell has to be programmed individually with no option to Paste or Fill to other cells in a range.
For explanation purposes, let's say your checkbox is A2, your cell to be conditionally formatted is B2, and your auxiliary cell is C2. To have the format of B2 determined by the checkbox status in A2, you will:
1. In C2 write: =IF(A, B, " ") The " " is any string or value that you don't expect to encounter in B normally, and using the space character means you don't have to worry about having it visible if C is in View.
2. In B2 use Conditional Format: "Equal To" cell C2 and set your text and fill attributes to be used when the box in A is checked.
That's it. Do that for every cell in the range.
Jerry

Can i use exfat format for my external western digital harddrive so that i can use in both windows and mac?

can i use exfat format for my external western digital harddrive so that i can use in both windows and mac?
thanks in advance.
<Email Edited by Host>

Yes you can. OS X version 10.6.6 and later can read/write exFAT. Windows XP SP3 and later can read/write exFAT. As posted by Radiation Mac, you can do it from Windows or from OS X.
However, I've noticed Windows to be somewhat picky about drives formatted on a Mac. So, if Windows can't read it, try formatting it on the Windows machine, and see how it works on the Mac.
Posting your email on a public forum isn't a very good idea. It will likely be harvested by spambots and used as the reply-to address for spam it sends out.
Also, most people are not going to send an email to you for similar reasons. Nobody knows who you are, so sending an email to you could be giving a spammer a valid email address.
The forum is set up to automatically notify you when there are responses to your questions. When you get one, you would log back into this forum and check to see what the answer was.

How to hide a row in BI Publisher using conditional formatting

Hi,
I am using BI Publisher 11.1.1.5.0.
I need to hide entire row based on the condition (if sal > 0 then hide entire row), please can you help on how can I achieve this?
thanks

Hi,
I've found the solution in
Report Designer's Guide for Oracle Business Intelligence Publisher Release 11g (11.1.1) Part No. E13881-02 - Section Conditional Formatting.
thanks

Using conditional formating on member columns in essbase hirarchy in obiee

Hi All,
I ws analysing an existing sample PnL report in obiee 11g.
Wht I found that there is conditional formating used on 'Balance' member column based on one of the member column (net income) from 'income statement' hirarchy of essbase cube. I tried to open the 'Conditional Format' tab and tried to look into the conditional formating based on the columns above. Wht I noticed that , in the filter, some values are uses such as equal to is in 300000 and so on.. I thought of editing the value to specify another value, but could not edit the value as it is non editable.
Can anyone tell me how to specify such value.? I tried to furhter investigate and found that is is actually comming from net income member, but I am not able to edit it modify it.. I wanted to used this formatting feature in my another report which I created from scratch, but not able to understand how to do it..
Any help, please?
Thanks and Regards
Santosh

Hi Dhar,
Thank you for your quick reply.
I have added couple of screenshot to flickr to clarify my problem: http://www.flickr.com/photos/93812026@N07/
Picture 1:
Yes, your assumption is correct. We are using gen x level members in report, but these members are shared members or Dynamic calculations i.e. we have created custom account hierarchy for them.
Picture 2:
Basic situation, when I query that hierarchy. I.e. it returns account names for both members in the hierarchy. Furthermore, so far I have used only one pair of account, i.e. WOC
Picture 3:
I'm able to "merge" these two account members simply by adding "case when" statement to account dimension object. It shows values correctly in a table (picture 4)
Picture 5:
BUT, when adding other accounts to query filter, the returned values are no longer correct, but some sort of multiplication.
--> it seems, that OBIEE cannot figure the context it should do the calculation against and I don't know how to define it there.
Ps. Next step was, that we tried to use dashboard prompt to return correct values to calculations, but after being able calculate correctly values for these above mentioned accounts, we ran into problem, when trying to add entity level to dashboard prompt (OBIEE gave an error refering Essbase). I believe this is a bug in this version.
-Esa-

Can we preserve Conditional Formatting in excel even after export ?

Hi,
I have requirement where I need to preserve the formulae and conditional formatting when exported in excel format.
The user is supposed to be changing the values and so the final result values and cell formats should change as well.
I tried the workaround to preserve the formulae as directed in other threads but would like to know if we also have a workaround to preserve the conditional formatting of the cells.
I know OfficeWriter can help me to get this requirement done but still I wonder if we have any workaround for this requirement.
Thanks.

Hi Rikz,
According to your description, you want to preserve the formula and conditional formatting when export report to excel format.
According to my knowledge, In earlier versions of Reporting Services, there was limited support for translating expressions in RDL to Microsoft Excel formulas. Since SSRS 2008, when you export a report to Excel, RDL expressions are not translated to Excel
formulas, which is documented at
http://msdn.microsoft.com/en-us/library/ms143380(v=SQL.100).aspx by Microsoft. When we export a report to excel, only the final data is exported. If some user want to preserve specify cells’ conditional formatting, we can use IIF function as a workaround
as below:
IIf(Globals!RenderFormat.Name Like "EXCEL*", Excel Formula, RDL Formula)
For more information about export formulas to Excel, please refer to the following feedback:
https://connect.microsoft.com/SQLServer/feedback/details/488517/ssrs-2008-export-formulas-to-excel
If you have any more questions, please feel free to ask.
Thanks,
Wendy Fu

Using conditional formatting on negative values in Web Analysis 931

Hi All,
Can I please have your thoughts on the below:
We open a web analysis report in Analyze View.
The scenarios are in the columns and we are trying to apply conditional formatting on negative values.
We right click the scenario in the columns and click Formatting...
We then tick the Conditional Formatting check box and we want to add a condition on negative numbers.
However we can only enter positive values as the - sign is not accepted. This means we cannot apply conditional formatting on negative values.
Does anyone know how this can be done? Am I missing the obvious?
Thanks for your help.
Seb

Gotcha. Ok. Have you thought about creating a new hidden calculated ColumnB whereby you multiply the values in ColumnA by -1 and then set your formatting based on the result in ColumnB. If the value in B is positive then you know A was a negative number so you can go from there, in a round about way? I don't have time at the moment to think it all the way out but something to think about. If your formatting involves just colors you could use Traffic Lighting to set the color on ColumnA based on result in ColumnB. Traffic Lighting out of the box is limited but it's a start until you have time to build your own.
-Karen

Can I use conditional build tags in CSS files?

I am using RoboHelp X5.0.2 and building CHM files.
I use conditional build tags to output different Help files
for the different products we have that all have similarities.
In the past I have setup the CSS file to show headers, links
etc in the color scheme we use to keep the look and feel of our
branding. One of the new products uses a different branding color
scheme.
I was wondering if there is a way I can use conditional build
tags in the CSS file so that when I build one type of help it uses
header in one color and when I build another help it uses a
different header color. Does anyone know how to do this? If it is
not possible in my current version, is it possible in the latest
version of Robohelp?

[WORKAROUND ALERT IN X502]
For .chm output, you could:
1. In the Topics pane, select all the topics (click on one
topic and press Ctrl+A).
2. Right click in the highlighted area and select Properties.
3. In the Appearance tab, select the different style sheet.
4. Click Save.
5. Generate the .chm file.
6. (optional) Repeat steps 1-4 to revert to previous style
sheet setting.
Good luck,
Leon

Can I use conditional and advanced actions on the same button?

I'm fairly new to Captivate, but come from a background of flash and am struggling to use Captivate to do some things I would have expected to be fairly simple and a normal requirement.
I want to create a screen with a number of interactive objects, in this case pictures, that the learner clicks on to display a piece of text.
On clicking the next picture the first piece of text is hidden and a second piece shown.
There are 6 pictures/buttons that need to work this way.
However I also want to assess whether all the buttons have been used, as we have to force the user to view the entire slide before they continue.
I can do the hide/show of text and buttons, and I've written a conditional action to check the variables for each button. However I don't know how/when to call this action.
I was hoping that in my advanced action for each button I could add in a call to the conditional 'check variables' action, which would nicely fulfil this requirement, however this doesn't seem to be the case.
I have also got animation/effects on the timeline before the images are on screen meaning I don't want to go back to the start of the timeline to use a 'on enter' event.
I'm surprised this isn't something more people need as although it may be frowned upon out in the e-learning field, disabled navigation is frankly not going away and working for any large corporation will be a must.
If anyone can shed some light on this, or maybe suggest a better approach then I would appreciate it.
Thanks.

Hi Lilybiri,
Thank you for this, I suspected that this was going to be the way I would have to progress.
I have to ask though, at present the company I work for uses a very straight forward off the shelf WYSIWYG elearning content designer.
One of the core template pages is a hotspot page, which works in the way I have explained at the top.
This is also one of the standard e-learning pages I have used in all my other positions, including when building in Flash.
It seems incredible to me that to do such a simple, commonly used, page type we will require what is a fairly involved process rather than this being one of the page types or templates.
I am currently trying to pilot Captivate to show how much better it is to the current product, however the other designers have no programming background and I think will stuggle with the conditional actions, meaning that this is pretty much going to be a no go which I'm gutted about...
I think I stand a chance of teaching advanced actions but anything beyond that is unlikely initially.
RodWard, thanks for your comments, I'm finding the actions ok in Captivate, as I say above I'm just amazed that this simple and commonly used page is so convoluted to create!
My other frustration is the lack of control of the events, not being able to specify x and y for motions etc. but I'm finding work arounds...
Is there a way to create my own page template? Could I write all the actions and bundle that into a page to provide the other designers so with some naming conventions they could use this functionality?
Thanks for your help.
Matt

Can I use NTFS format on an external hard drive?

Hello all,
I have a Western Digital MyBook 2.0 500GB External Hard Drive that is formatted in fat32 format. The problem is, the files I wanted to back up are all 6-8GB dmg's and fat32 only supports the transfer of files up to 4GB (more like 3.75 in reality...).
Can I reformat the drive to NTFS and still be able to use it on my Mac?
If so, is there a particular way to do so that anyone can recommend?
Or, is there another format that is out there that allows larger file transfers than 4GB and is still Mac-friendly?

I don't need to use it with a PC at all, thankfully I've ditched every remnant of PC's in my life...
Except for my Xbox 360
So, reformatting to OS Extended (Journaled) will allow me to transfer files that are about 7GB?

How can you use a format string to make all information in a string line up and stack up?

I am trying to post data on screen using "format into string" and make all data line up into one indicator string

Not exactly sure what you are looking for. Could you elaborate, or post a screen shot of what you are trying to accomplish. I would hate to give you an answer based on my interpretation of your problem.

Can I use png format images when sending an iphoto book for printing?

Writing an iPhoto book, I want to use some photographs taken by friends, and these photos are in png format. Will they work when I upload them for printing?

Dear Larry
Thank you very much for the information. I hate pressing buttons when I am not sure of what will happen!
Many thanks
Chris

Using conditional format for company logo

Hi
Before running the report, customer, will enter some data into the promt(Entity dimensions - Holding structure)
Every company has unique logo, and depending on selection , in report should display the company's logo
Is it possible?
Regards
Alexander

One way you might be able to do this is to have each logo/graphic on a separate text row and then add conditional suppression on the rows only to show that row if it matches the required value for the entity.
Depending on how many entities you have it could be confusing and be maintenance intensive if new entities were added.
Hope this helps. Cheers.

Can I use conditional formatting in OWA?

Similar Messages

Maybe you are looking for