Can I use LabVIEW to load data directly into system memory? The serial card I'm using isn't supported by NI nor does VISA recognize it. I'm using a Win32 function to read the data from the card and now I want it to go directly to system memory.

Can I use LabVIEW to load data directly into system memory from a VI? The serial card I'm using isn't supported by NI nor does VISA recognize it. I'm using a Call Library function to read the data from the card and now I want it to go directly to system memory.
The data is being received at 1Mbps.
Thanks

Two questions:
One, if it's a serial card, then presumably it gives you more serial ports, like COM3, COM4, etc. If so, VISA would see the COM ports, and not the card directly. The drivers for the card should make it so that you see the extra serial ports from the OS. If you don't see the extra COM ports from VISA, then it sounds like the drivers for the card are not installed properly. Do the extra COM ports show up in Device Manager?
Two, you said that you're using a Call Library function to get the data and you want to put it into system memory. Errr.... you just read the data and you have it in memory by definition. Are you saying you need a way to parse the data so it shows up on a graph or something?

Similar Messages

I had to wipe VISTA from my machine, and now I want to install it again

I had to wipe VISTA from my machine, and now I want to install it again, but I Lenovo never gave me a CD for it. I assumed
I need to download it and then re-install visa?
Is that what I have to do?
Where can I get the download fot it

you may have tinkered with the partitions,get the recovery cd set.if you still want to use ubuntu try using the live version or use the wubi installer,it installs in a windows partition as a program(you can safely delete it later from add or remove programs) in this way you can use both of them at your choice..
Cheers and regards,
• » νιנαｿѕαяα∂нι ѕαмανє∂αм ™ « •
●๋•کáŕádhí'ک díáŕý ツ
I am a volunteer here. I don't work for Lenovo

How do I add photos to the camera roll that were not taken on my iPad? I imported photos to my iPad from my camera, and now I want to add them to my camera roll which is sync'ed with Dropbox as a back up mechanism.

How do I add photos to my camera roll that were not taken one my iPad? I have iMported photos from my camera to my iPad. Theses photos are in the imported photo album. I want to move these photos to my camera roll but can't figure out how to this. I want them in my camera roll because that is the album that syncs with Dropbox where I want to backup my photos. Thank you for your help.

Consider using sshfs to mount your Pi from your Linux boxes. It's much easier to configure and manage than samba. It sounds like you already have your Windows machines mounting your Pi so Samba is doing its job in that respect.
More info on sshfs in the Wiki: https://wiki.archlinux.org/index.php/Sshfs
To help get you off the dime, here's a modified line from my fstab that I use to mount my Pi with:
gav@PI:/mnt/backup /mnt/rpi/backup fuse.sshfs rw,relatime,user_id=0,group_id=0,allow_other 0 0
Subsitute my mount points with yours.
For a password-less mount:
ssh-copy-id gav@PI
after you've set up ssh and generated some keys on your client box.
Here are some relevant lines from the smb.conf file on my Pi that I use for my one Windows box in the house that might help you with your write permissions:
security = user
hosts allow = 192.168.1.0/255.255.255.0
guest account = gav
; And my share setup:
[rpi]
comment = Public Stuff
path = /mnt
writable = yes
; printable = no
; write list = @krb
[torrent_dl]
path = /mnt/video/torrent_dl
writable = yes
create mask = 0770
directory mask = 0770
guest ok = Yes
case sensitive = No
read only = No
Hope this helps.

I removed my Launchpad app from my dock, and now I want it back. Where do I find it?

I removed my Launchpad app from my dock, and I want it back. Where do I find it?

Choose Applications from the Finder's Go menu and drag it back.
(126790)

Have made a rebbot from Time Machine, and now I lack a lot of pictures. Can see icons, but not enlarge them. Especially pictures where 2009 is included in the date is missing? When I set up my desktop, I can find some of the pictures. Where do They hide,

Missing Pictures.
Have made a rebbot from Time Machine, and now I lack a lot of pictures. Can see icons, but not enlarge them. Especially pictures where 2009 is included in the date is missing?
When I set up my desktop, I can find some of the pictures. Where do They hide, and what shall I do.
Have made back up, but unfortunately a little too late. What to do?
MacBook Pro 15 "late 2008, Processor 2.53 Ghz Intel Core 2 Duo, Graphics NVIDIA GeForce 9400M 256 MB, Software Mac OS X 10.7.4 Lion (11E53).

1. You did not get an error message telling you that your iPhoto library was getting full. You got a message telling you that your HD was getting full, right?
OS X needs about 10 gigs of hard drive space for normal OS operations - things like virtual memory, temporary files and so on.
Without this space your Mac will slow down as the OS hunts for space on the disk, files will be fragmented, also slowing things down, apps will crash and the risk of data corruption - that is damage to your files, photos, music - increases exponentially.
Your first priority is to make more space on that HD. Nothing else can be done until you do.
Purchase an external HD and move your Photos and Music to it. Both iPhoto and iTunes can run perfectly well with the Library on an external disk.
Your Library has been damaged from being run on an overfull disk.
How much free space on it now?

Siri says she can't read my email from the iphone5s lock screen when I'm using the standard headphones, but I could do that on 4s. How can I get my 5s to do that?

Siri says she can't read my email from the iphone5s lock screen when I'm using the standard headphones, but I could do that on 4s. How can I get my 5s to do that?

Hi Liz,
Sorry to hear you are having a similar problem. Last night I went to the tool bar at the top of iphoto, clicked on "File", then clicked "Browse Backups" in the drop down menu.    I have an external hard drive that is set up to Time Machine.   The Browse Backups opened the iphoto pages in the Time Machine. I selected a date one day ahead of the day I performed the now infamous update, and it showed my iphoto library as it had existed that day.   I then clicked "Restore Library" at the bottom right corner of the Time Machine screen.   Roughly 2 hours later my iphoto was back to normal.   When I opened iphoto there was a message saying I need to upgrade my program to be compatible with the new version of iphoto(version 9.2.1). I clicked "Upgrade" and within seconds it had done whatever upgrading it needed to do.
The only glitch in the restoration was that it restored the library as it appeared last week, so I no longer had photos I had imported this past weekend.   I simply went back to the Browse Backups in the drop down menu, when Time Machine opened I selected the page showing my pictures from this weekend and again said to Restore Library.   Roughly 45 minutes later the library was restored including the most recent photos.
I am now a happy camper.
I don't know if any of this will be of help to you because your email says you are having trouble with photos imported after the upgrade was performed.   Have you had any pop up notices when you first open iphoto, that tell you you need an upgrade to be compatible with the new iphoto?     If so have you clicked "upgrade"?
Good luck Liz, if you have Time Machine running as a back up to your library, maybe you wil be able to get help there, by following my instructions above.   Otherwise,   good luck with your investigations.   I'd be interested in hearing how you make out.
Karen

Why U. S. Store refuses my Visa card with it's official and with the global science I can buy from Bahrain store and now my account stoped with reason owe ..

Why U. S. Store refuses my Visa card with it's official and with the global science I can buy from Bahrain store and now my account stoped with reason owe ..

You can ONLY use the itunes store of your country of residence ( proven by the billing address on your credit card) AND ONLY while you are physically located inside the borders of that country.
You would have to live in the U.S and physically be located in the U.S in order ot use the U.S tunes store. The same is true for each countrys itunes store.

How can I input read a line from a file and output it into the screen?

How can I input read a line from a file and output it into the screen?
If I have a file contains html code and I only want the URL, for example, www24.brinkster.com how can I read that into the buffer and write the output into the screen that using Java?
Any help will be appreciate!
======START FILE default.html ========
<html>
<body>
 
<center>

Welcome to a DerekTran's Website! 
Underconstructions.... 
 </center>
 
Hello, 
 
I've been using the PWS to run the website on NT workstation 4.0. It was working
fine. 
The URL should be as below: 
http://127.0.0.1/index.htm or http://localhost/index.htm
And suddently, it stops working, it can't find the connection. I tried to figure
out what's going on, but still NO CLUES. Does anyone
know what's going on? Please see the link for more.... I believe that I setup
everything correctly and the bugs still flying in the server.... 
Thank you for your help.

PeerWebServer.doc
 
CannotFindServer.doc
 
HOSTS file is not found
 
LMHOSTS file
 
How to Setup PWS on NT
 
Issdmin doc
Please be patient while the document is download....
 If you have any ideas please drop me a
few words at [email protected] 
 
 

 
</body>
</html>
========= END OF FILE ===============

Hi!
This is a possible solution to your problem.
import java.io.*;
class AddressExtractor {
 public static void main(String args[]) throws IOException{
 //retrieve the commandline parameters
 String fileName = "default.html";
 if (args.length != 0) fileName =args[0];
 else {
 System.out.println("Usage : java AddressExtractor <htmlfile>");
 System.exit(0);
 BufferedReader in = new BufferedReader(new FileReader(new File(fileName)));
 StreamTokenizer st = new StreamTokenizer(in);
 st.lowerCaseMode(true);
 st.wordChars('/','/'); //include '/' chars as part of token
 st.wordChars(':',':'); //include ':' chars as part of token
 st.quoteChar('\"'); //set the " quote char
 int i;
 while (st.ttype != StreamTokenizer.TT_EOF) {
 i = st.nextToken();
 if (st.ttype == StreamTokenizer.TT_WORD) {
 if (st.sval.equals("href")) {
 i = st.nextToken(); //the next token (assumed) is the '=' sign
 i = st.nextToken(); //then after it is the href value.
 getURL(st.sval); //retrieve address
 in.close();
 static void getURL(String s) {
 //Check string if it has http:// and truncate if it does
 if (s.indexOf("http://") > -1) {
 s = s.substring(s.indexOf("http://") + 7, s.length());
 //check if not mailto: do not print otherwise
 if (s.indexOf("mailto:") != -1) return;
 //printout anything after http:// and the next '/'
 //if no '/' then print all
 if (s.indexOf('/') > -1) {
 System.out.println(s.substring(0, s.indexOf('/')));
 } else System.out.println(s);
}Hope this helps. I used static methods instead of encapsulating everyting into a class.

Ive just learned that i can use loadjava to load jsp pages into the database.

Ive just learned that i can use loadjava to load jsp pages into the database. How is that possible. How can someone go to my lets say, index.jsp page and actually see it if its inside the database? What authenticates it? Where would you set the parameters to tell http(apache) to look inside the db for the pages?
Any ideas?

Thanks for the reply. If I put the file on the database, does it have to be in a particular location? I've put it on the database server, launched sql*plus (as APPS) and ran the following:
execute dbms_java.loadjava('-v', 'ZebraGetPrinterFromXML.class');
PL/SQL procedure successfully completed.Then when I try to run a process that uses this I get this:
ORA-29540: class ZebraGetPrinterFromXML does not exist

I want to change the cantry because I used us voucher and now the remanding only 0.05 and now I want use my Saudi credit card but give massage I have to finish the balance and nothing I can by by this amount I need to remove the balance to change the city

I want to change the cantry because I used us voucher and now the remanding only 0.05 and now I want use my Saudi credit card but give massage I have to finish the balance and nothing I can by by this amount I need to remove the balance to change the city

Click here and ask the iTunes Store staff to zero your account balance.
(105215)

Have upgraded to Lion 10.7 from 10.6 and now it keeps logging off abruptly though the power settings are proper and i can not take backup using timemachine. any help welcome...

Have upgraded to Lion 10.7 from 10.6 and now it keeps logging off abruptly though the power settings are proper and i can not take backup using timemachine. any help welcome...

Have upgraded to Lion 10.7 from 10.6 and now it keeps logging off abruptly though the power settings are proper and i can not take backup using timemachine. any help welcome...

Can Audit Vault be used for getting detailed read type information from the siebel database?

Can Audit Vault be used for getting detailed read type information from the siebel database?

Kramer wrote:
saurabh wrote:
check below cmd to see where archive are generated.
SQL> archive log list
And also check the following
SQL> select flashback_on from v$database;
Hi
Here is the out put
SQL> select flashback_on from v$database;
FLASHBACK_ON
NO
SQL> archive log list
Database log mode              Archive Mode
Automatic archival             Enabled
Archive destination            USE_DB_RECOVERY_FILE_DEST
Oldest online log sequence     11
Next log sequence to archive   12
Current log sequence           12
The flashback is not enabled. But archive log list shows archive destination is specified to use_db_recovery_file_dest. And I checked the log_archive_dest_10 still empty
Flashback off or on has nothing to do with it.

Error while reading file entries from the database

Hi there,
We are running a instance of xmii 12 in a VM (VMware) and after somebody shutdown the host machine without shutting down the VM (great idea isn't it?) we keep getting this message when trying to access xMII:
"Application cannot be started.
Details: com.sap.engine.services.deploy.container.ExceptionInfo: Error while reading file entries from the database."
Any clue? Any suggestion on how we can recover from that?
Thanks a whole lot,
Dom
Server log:
#1.5 #000C29A3B1F20002000000C400000F2800044829A35270F8#1205243578005#/System/Server##com.sap.engine.services.dbpool.deploy.ContainerImpl####n/a##60152160ef7211dcb7a5000c29a3b1f2#SAPEngine_System_Thread[impl:5]_17##0#0#Info#1#com.sap.engine.services.dbpool.deploy.ContainerImpl#Plain###DataSources or DataSource aliases of 'sap.com/tcmonitoringsysteminfo' application started successfully.#
#1.5 #000C29A3B1F20002000000C500000F2800044829A3527A6C#1205243578005#/System/Server##com.sap.engine.services.servlets_jsp.server.container.WebContainer####n/a##60152160ef7211dcb7a5000c29a3b1f2#SAPEngine_System_Thread[impl:5]_17##0#0#Info#1#com.sap.engine.services.servlets_jsp.server.container.WebContainer#Plain###application [] Start of application [sap.com/tcmonitoringsysteminfo] finished successfully on Web Container.#
#1.5 #000C29A3B1F20002000000C600000F2800044829A3527DB5#1205243578005#/System/Server##com.sap.engine.services.deploy####n/a##60152160ef7211dcb7a5000c29a3b1f2#SAPEngine_System_Thread[impl:5]_17##0#0#Info#1#com.sap.engine.services.deploy#Plain###
Operation startApp over application sap.com/tcmonitoringsysteminfo finished successfully on server 305221750#
#1.5 #000C29A3B1F20002000000C700000F2800044829A3527E03#1205243578005#/System/Server##com.sap.engine.services.deploy####n/a##60152160ef7211dcb7a5000c29a3b1f2#SAPEngine_System_Thread[impl:5]_17##0#0#Info#1#com.sap.engine.services.deploy#Plain###
Operation startApp on application sap.com/tcmonitoringsysteminfo finished on current cluster node for 221 ms.#
#1.5 #000C29A3B1F20002000000C800000F2800044829A3528B49#1205243578005#/System/Server##com.sap.engine.services.deploy####n/a##60152160ef7211dcb7a5000c29a3b1f2#SAPEngine_System_Thread[impl:5]_17##0#0#Error#1#com.sap.engine.services.deploy#Plain###Error occurred while initially starting application sap.com/xappsxmiiear:Error while reading file entries from the database.#
#1.5 #000C29A3B1F20002000000CA00000F2800044829A352922B#1205243578015#/System/Server##com.sap.engine.services.deploy####n/a##60152160ef7211dcb7a5000c29a3b1f2#SAPEngine_System_Thread[impl:5]_17##0#0#Info#1#com.sap.engine.services.deploy#Plain###The synchronization of applications with DB completed for 39304 ms.#
#1.5 #000C29A3B1F200040000000200000F2800044829B290A4F8#1205243834341#/System/Server/SLDService##com.sap.sldserv.DataCollector####n/a##0da42150ef7311dcb908000c29a3b1f2#SAPEngine_System_Thread[impl:5]_7##0#0#Warning#1#com.sap.sldserv.DataCollector#Plain###Communication configuration is incomplete. No data transfer possible until corrected.#

Well thanks for the hint. Actually, the DB was up but corrupted. I managed to solve the bug by re-deploying xMII (using the SDM tool) which kept all my data but redeployed both the config db of (x)mii and the class files.

What are the commands available to read a file from application server and

What are the commands available to read a file from application server and store the file into an internal table?

Hi,
To read a file from an Application Server to an Object there is a command in ABAP called READ DATASET. After that file is transported to that object you have to do a loop and put that data in an Internal Table.
This statement exports data from the file specified in dset into the data object dobj. For dobj, variables with elementary data types and flat structures can be specified. In Unicode programs, dobj must be character-type if the file was opened as a text file.
For dset, a character-type data object is expected - that is, an object that contains the platform-specific name of the file. The content is read from the file starting from the current file pointer. After the data transfer, the file pointer is positioned after the section that was read. Using the MAXIMUM LENGTH addition, the number of characters or bytes to be read from the file can be limited. Using ACTUAL LENGTH, the number of characters or bytes actually used can be determined.
In a Unicode program, the file must be opened with an arbitrary access type; otherwise, an exception that cannot be handled will be triggered.
If the file has not yet been opened in anon-Unicode program, it will be implicitly opened as a binary file for read access using the statement
OPEN DATASET dset FOR INPUT IN BINARY MODE.
. If a non-existing file is accessed, an exception that can be handled can be triggered.
Influence of Access Type
Files can be read independently of the access type. Whether data can be read or not depends solely on the position of the file pointer. If the latter is at the end of the file or after the file, no data can be read and sy-subrc will be set to 4.
Influence of the Storage Type
The import function will take place irrespective of the storage type in which the file was opened with the statement OPEN DATASET.
If the file was opened as a text file or as a legacy text file, the data is normally read from the current position of the file pointer to the next end-of-line marking, and the file pointer is positioned after the end-of-line marking. If the data object dobj is too short for the number of read characters, the superfluous characters and bytes are cut off. If it is longer, it will be filled with blanks to the right.
If the file was opened as a binary file or as a legacy-binary file, as much data is read that fits into the data object dobj. If the data object dobj is longer than the number of exported characters, it is filled with hexadecimal 0 on the right.
If the specified storage type makes conversion necessary, this is executed before the assignment to the data object dobj. Afterwards, the read data is placed, byte by byte, into the data object.
System Fields
sy-subrc Meaning
0 Data was read without reaching end of file.
4 Data was read and the end of the file was reached or there was an attempt to read after the end of the file.
Thanks,
Samantak.
Rewards points for useful answers.

I reinstalled my OS and now it wants to empty my phone. How can I get it to back up my phone without removing the data?

I reinstalled my OS and now it wants to empty my phone. How can I get it to back up my phone without removing the data?

You can't. But if you backed up your computer prior to wiping it out, you should be able to restore your iTunes library, contacts, photos, etc. from that backup. Once you do, you can set the phone up again and just sync everything from your library back to it.
If you didn't back the computer up either, you can transfer items purchased on the phone into iTunes, and if you set up at least one contact in whatever application you sync your contacts to on the computer, it will offer to merge the address books on the first sync, saving those. Any media you'd acquired from sources other than the iTunes store will have to be re-downloaded from the source or re-ripped.
The iPhone is NOT a backup device.

Can I use LabVIEW to load data directly into system memory? The serial card I'm using isn't supported by NI nor does VISA recognize it. I'm using a Win32 function to read the data from the card and now I want it to go directly to system memory.

Similar Messages

Maybe you are looking for