Can I use NI TestStand for testing ZigBee and Bluetooth transceivers and processors

Hi , I should create , maintain snd excute  software test plans for testing low power wireless networks such as ZigBee, Bluetooth  using Python scripts and QA Methodology .The test design includes testing 
 RF transceivers, RF transmitters, RF receivers, System-on-Chips, Front Ends, ZigBee Processors, Bluetooth LE Processors, and RFID reader
I am a LabVIEW Developer and familiar with testing RF Components using NI Hardware such as PXIe system but I am new to TestStand and Python. Can I use Teststand to develop and deploy the tests for this purpose and also LabVIEW instead of Python
If it is possible could you please let me know that are the advantage and disadvantage of using LabVIEW and NI Test Stand for these kind of test design and implementation.
I greatly appercaite your help and advice on this matter .Many thanks.

Hi en99,
I am unsure what you mean by usign LabVIEW instead of Python - what part of the system would LabVIEW replace? Usually if you were using Python in automated test, it would be to handle the test processing, which in this case is done by TestStand.
As for advantages of TestStand over LabVIEW, the main one which SunRS mentioned is that TestStand has a test management engine, which covers result logging and passing test parameters to the various test modules, which can be written in many languages. As I mentioned above, it is Python which is commonly used to write alternative test managament engines. It is possible to write one in LabVIEW, but for good results it must be carefully architected and is typically a very time-consuming task if you want to keep it modular and use it for other applications. TestStand also has a number of built in tools which help to monitor various aspects of the test sequences, as well as provide multithreading optimisations.
I hope this helps 

Similar Messages

  • Can I use Parallel execution for Global Temporary table within SP and How

    Dear Gurus,
    I have Global temporary table as below
    Create global temporary table Temp_Emp
    empno number,
    ename varchar2(20),
    deptno number
    ) on commit preserve rows;
    During processing I insert the data into this table and then fire query on Temp_Emp, get the data and pass it to front end.
    The SP as shown below
    Create or replace procedure get_emp_data
    empid in number,
    emp_detail out RefCsr -- Ref cursor
    as
    begin
    -- some code here
    open emp_detail for
    select *
    from Temp_Emp
    where empno = empid;
    end get_emp_data;
    Can use Parallel Query execution on Temp_Emp table and how ?
    i.e. do need to explicitly use parallel construct in query or is it default.
    Because I have many SQL like above (on global temporary tables) within Stored Procedures.
    Can anybody give me any suggestion.
    Thanking in Advance
    Sanjeev

    How come you are populating a temporary table and then opening a cursor on this temporary table for the front end to use?
    Couldn't you presumably just form a query out of the code you use to populate the temporary table? This is the recommended approach in Oracle.

  • I download ios8 I can't use my song for ringtone and other ringtone it is not loud and I miss call

    I Download ISO 8 and I can't use the song for my ringtone , but it vibrate and I can't hear the phone rings . Other ringtone it is not loUd

    There is a difference between the passcode and the sync key.<br />
    The passcode allows to setup all sync parameters with a single code on other devices.<br />
    To enter the sync key (and user name and password) you need to click on "I don't have the device with me" at the bottom of the "Add a Device" window (Click Connect).
    * https://support.mozilla.com/kb/where-can-i-find-my-firefox-sync-key
    * https://support.mozilla.com/kb/find-code-to-add-device-to-firefox-sync

  • Can I use an iPad for taking hand written notes using a stylus? Not a large stylus, but a one like Sumsungs.

    Can I use an iPad for taking hand written notes using a stylus? Not a large stylus, but a one like Sumsungs.

    Hi HawkeyeD1977, thank you for watching!
    1) I don't think you can really scratch the screen with the Jot Script. I don't have a screen protector, but I have reasons to think it will still work if you have one (I tried the Scrip through a think sheet of plastic, and I still works: more on that in my next video).
    2) It's true that the Script is noisy, but as I often say: have you ever tried to focus on the background noise of, say, a classroom? It is very noisy too! I'm always surprised by how good our brain is to filter background noises. So really, it depends on your environment and on the ability of your brain to filter noise. For me, I'd rather use a stylus that is a little noisy but very precise. It also depends on how you write text: as you can see on my video, I don't lift my pen very often, I write big groups of letters together.
    3) You should watch my latest video about that: I talk about Memo and Notes Plus. Memo has a handwriting technology that you can test for free, and buy as an in-app purchase inside Notes Plus, to use in a realy note-taking app. In Notes Plus, you can indeed convert just selected areas containing text.
    4) It won't have a text convertor, not in the next update. Maybe latter!
    If you want more information about the Jot Script, stay tuned: by the end of the week, I will have uploaded a video to talk about the Scrip with more hindsight after one month.

  • Can I use one account for both my labtop and my ho...

    can I use one account for both my labtop and my home computer?
    Solved!
    Go to Solution.

    Softthunder wrote:
    can I use one account for both my labtop and my home computer?
    Hello,
    Yes you can. You can access your account using any Skype enabled computer/device in any country worldwide.
    TIME ZONE - US EASTERN. LOCATION - PHILADELPHIA, PA, USA.
    I recommend that you always run the latest Skype version: Windows & Mac
    If my advice helped to fix your issue please mark it as a solution to help others.
    Please note that I generally don't respond to unsolicited Private Messages. Thank you.

  • HT204053 Dear Support Team, every time i tried to logon Icloud its gives me wrong user name or password and at the end it show me error " This Apple ID is valid but is not an ICloud Account" then how can i use one account for same Apple ID and ICloud???

    Dear Support Team,
    Every time i tried to logon Icloud its gives me wrong user name or password and at the end it show me error " This Apple ID is valid but is not an ICloud Account" then how can i use one account for same Apple ID and ICloud?
    Thanks

    It is not possible to create a new iCloud account using a Windows machine. You must create the account using a Mac (10.7.5 or more) or an IOS device (iPhone etc). Once that is done you can sign into and use the account on your Windows machine.

  • Can i use one hardrive for time machine and other data?

    i want to buy an external drive for my macbook pro retina. i want to knwo if i were to buy an external hardrive big enought ot back up my 768 on my retina could i also put other media on it (like video and movie) without it overwriting or something like that

    screenfreak wrote:
    i want to buy an external drive for my macbook pro retina. i want to knwo if i were to buy an external hardrive big enought ot back up my 768 on my retina could i also put other media on it (like video and movie) without it overwriting or something like that
    Buy one hard drive for TimeMachine, large as possible for maximum amount of saved states, keep it connected more often so it updates more often to recover deleted files.
    Buy one hard drive the same size or slightly larger to clone your boot drive to it, it will be a hold option key bootable clone in case your boot drive fails to boot. Update it before doing anything major to your machine. Keep it disconnected in case of malware so it doesn't get infected or delete your files.
    Buy one hard drive for extra storage if your boot drive is getting full for instance.
    Buy one hard drive to backup the extra storage drive and treat it like the clone, make sure you have clean extra storage drive before connecting and updating it.
    Label and date each drive, your memory will fail you and you'll accidentally overwrite a drive.
    Keep your drives separate and in their respective purposes, in other words do not use partitions or use TimeMachine to backup other drives.
    Never use Filevault, it's cracked, it's worthless, impossible to recover data and you'll have to give up the password for repair or customs/searches anyway. Use a external hardware based encrypted drives and USB Iron Keys. This way your sensitive data is off the machine and can be used with another machine.
    Despite how many drives and backups, it's good to also make burned and labeled DVD's of your most important files like music for instance when you first get them. It's because sectors fail on hard drives and takes out your data and thus on all backups made afterwards. With burned DVD's it's permanent, unless you scratch it, melt it or loose it.
    Hardware also fails, more often than software because it's moved/abused while in operation.
    If you lose your TM drive, you ALSO lose what's on the other partitions on the drive or data that TM drive was backing up from other drives.
    Drives are cheap, data is not. Protect the data. Because it's a fortune trying to recover lost data off a dead drive.

  • Can I use touch ID for App Store without using a passcode?

    It seems that the ony way I can use the touch ID for App Store and iTunes is if I have a passcode to get into my phone. I don't want a passcode, it get in and out of my phone too often to have to unlock it all the time and I hate manually typing in my password for App I buy. Why can't it do both, isn't the touch ID just as secure for purchases even if you don't have to unlock the phone to get to it??

    From the article:
    You can set up Touch ID in iOS Setup Assistant or by tapping Settings > Touch ID & Passcode. To set up Touch ID, you must first set a passcode. Touch ID is designed to minimize the input of your passcode, but you need a passcode for additional security validation, such as enrolling new fingerprints.
    So yes, that's how it's designed. You must have a passcode, though as long as you understand the caveats:
    In addition, you will need to enter your passcode to unlock your iPhone in these conditions:
    After restarting your iPhone 5s
    When more than 48 hours have elapsed from the last time you unlocked your iPhone 5s
    To enter the Touch ID & Passcode setting
    and
    You can't use Touch ID for purchases if Require Password in Settings > General > Restrictions is set to Immediately.
    you should be able to use Touch ID without needing your passcode. If none of those circumstances is true and you're still being asked for your passcode to make a purchase from the iTunes Store, it would seem that something is amiss with your iPhone.
    Regards,

  • HT3354 how can i use one table for reference to another

    how can i use a table for a referance to another eg when i type a word in a cell, i will like it to match the word with another table then return the information in the cell i am using

    you can use vlookup() (or any of the lookup family of functions) to locate an item based on a key value:
    Here is an example of something you can do with two tables:
    The table on the right is title "Data" and stores a list of names with age and favorite color.
    The table on the left uses the value in the first column to lookup up information in the table Data
    in the table on the left:
    B2=IFERROR(A2&" is " & VLOOKUP(A2, Data :: A:D, 2, 0)&" years old and likes the color "& VLOOKUP(A2, Data :: A:D, 3, 0), "NOT FOUND")
    I know this look complicated.  so I'll break it up into smalled pieces:
    first the "&" is called the concatenate operator and joins two strings.  like this:
    a string is a set of characters between double quotes.
    so "string 1" & "string 2" becomes "string 1string2"  or "Sam " & "Jones" becomes "Sam Jones"
    you can use cell references instead of strings directly in which case the concatenation is performed on the contents of the cells.
    so if cell A1 contains "Hi " and the cell A2 contains "There"  then A1 & A2 will result in "Hi There"
    so you could add the formula
    A3=A1 & A2
    this is short hand for select cell A3 then type everything including the A3 so that A3 contains "=A1 & A2" (omit the double quote)
    OK.  So the formula I provided concatenates several items together:
    it concatenates A2, then the string " is " then a formula, then the string " years old and likes the color " then a formula
    the two formulas (highlighted in blue) perform a lookup of the value in cell A2 in columns A thru D of the table named "Data".  If if finds the value in cell A2 in the first column of the lookup range in the table Data (column A) then it returns the value from the same row but in the second or third column.
    all that is in a function calld iserror() to trap the condition where the calue you enter in A2 does not exist in the table Data:
    You will find the Numbers users guide and function reference helpful.  You can download then from Apple here:
    http://support.apple.com/manuals/#productivitysoftware

  • Can I use same account for android and PC and how ...

    Can I use same account for android tablet and PC and how do I link both?

    You can use the same Apple ID for both phones, you would then be able to use the purchased Apps/Content on both phones without having to pay again.

  • I have two iphone one is iphone 5 and othere is iphone 4 . can i use same id for both ? And do i have to purchase the application again for iphone 4 which i have buyed for iphone 5.??

    i have two iphone one is iphone 5 and othere is iphone 4 . can i use same id for both ? And do i have to purchase the application again for iphone 4 which i have buyed for iphone 5.??

    You can use the same Apple ID for both phones, you would then be able to use the purchased Apps/Content on both phones without having to pay again.

  • Can I use a domain for one site and mobile me for a different site?

    Can I use a domain for one site and mobile me for a different site?
    I have two sites, I would like to have up and I would like to do one through a domain and one through mobileme is this possible?

    Yes you can. You can use the CNAME method of forwarding for the first site (the top site in iWeb) and use the MMe URL for your account for the other site: http://web.me.com/YourAccount_Name/SiteName/
    OT

  • Have iPad, iPod Touch and iPhone 4s. Can I use one charger for all

    I have and iPad, iPhone 4S and iPod 4. Can I use one charger for all 3 and if so, which one. TZ all

    You can use the iPad charger for all.

  • In Bte can i use same Product for 2 different process

    in Bte can i use same Product for 2 different process

    hi
    as per i know yes but since there r two type of interface behaviour is defferent .
    For
    Publish & Subscribe interfaces 
    if any event occur in this type both the process can work simultaneously and they will not intervene each other
    whereas in
    Process interfaces
    at an time any one process can be active.
    Reward if usefull
    Cheers
    Snehi

  • Can you use one PC for 2 different Ipods, with out erasing the others music from Itunes?

    Can you use one PC for different Ipod touch's , with out erasing the other persons Itunes music?

    Yes.  See:
    How to use multiple iPods, iPads, or iPhones with one computer

Maybe you are looking for