Can I write Design-time for JSP custom tag(not JSF components)

I have some old JSP custom tags(not JSF components), and I want to use them in the IDE through the toolbox.
Now I have already written the BeanInfos for these tags, and they can be drag from the toolbox; but it will throw a Exception when render the tags, and the properties in the Property Editor are not which I describe in the BeanInfos.
How can I write Design-time for these tags? or whether it is possible to write the Design-time for these tags?
the Exception is shown as follow:
java.lang.ClassCastException
     at com.sun.rave.insync.faces.FacesPageUnit.renderNode(FacesPageUnit.java:1347)
[catch] at com.sun.rave.insync.faces.FacesPageUnit.renderBean(FacesPageUnit.java:1086)
     at com.sun.rave.insync.faces.FacesPageUnit.getFacesRenderTree(FacesPageUnit.java:993)
     at com.sun.rave.css2.FacesSupport.getFacesHtml(FacesSupport.java:152)
     at com.sun.rave.css2.CssContainerBox.addNode(CssContainerBox.java:373)
     at com.sun.rave.css2.CssContainerBox.createChildren(CssContainerBox.java:354)
     at com.sun.rave.css2.DocumentBox.createChildren(DocumentBox.java:90)
     at com.sun.rave.css2.DocumentBox.relayout(DocumentBox.java:160)
     at com.sun.rave.css2.PageBox.layout(PageBox.java:392)
     at com.sun.rave.css2.PageBox.relayout(PageBox.java:454)
     at com.sun.rave.css2.DocumentBox.redoLayout(DocumentBox.java:313)
     at com.sun.rave.css2.PageBox.redoLayout(PageBox.java:460)
     at com.sun.rave.css2.DocumentBox.changed(DocumentBox.java:634)
     at com.sun.rave.designer.DesignerPaneUI$UpdateHandler.changedUpdate(DesignerPaneUI.java:1012)
     at com.sun.rave.text.Document.fireChangedUpdate(Document.java:851)
     at com.sun.rave.text.Document$5.run(Document.java:631)
     at java.awt.event.InvocationEvent.dispatch(InvocationEvent.java:178)
     at java.awt.EventQueue.dispatchEvent(EventQueue.java:454)
     at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:201)
     at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:151)
     at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:145)
     at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:137)
     at java.awt.EventDispatchThread.run(EventDispatchThread.java:100)

Similar Messages

Design view for jsp custom tags.

when we drag-and-drop custom tag control in the source of jsp page, when we switch to the design view of jsp we should be able to view controls as desired.
Observation: 1) Eclipse 3.2 doesn't have design view for jsp pages.
2) which software uses the design view. we need to extend eclipse core framework and we do not find any technical approach document to proceed further on this.
3) RAD 6.0 we can see a JSP in design view.
I'm searching for any technical approach document to create plugin that can intercept the custom tags and provide a design view.
Will any one suggest the plugin for that.

Jeff,
I have checked with engineering and found that JSP Design View support on
Linux is a planned feature for the next release. I don't think we will have
this feature as part of a Service Pack for 8.1
Regards,
Raj Alagumalai
WebLogic Workshop Support
"Jeff Cassanvoa" <[email protected]> wrote in message
news:3f4df04e$[email protected]..
>
Raj,
Thanks for the information!! Any timeframe when it might be supportedon Linux
Thanks,
Jeff
"Raj Alagumalai" <[email protected]> wrote:
Jess,
Unfortunately, the JSP design view is currently not supported on Linux.
Workshop does allow to do remote development where the IDE is running
on a
Windows machine and connects to a server running on Linux/Solaris.
Regards,
Raj Alagumalai
WebLogic Workshop Support
"Jeff Cassanova" <[email protected]> wrote in message
news:[email protected]..
Does anybody else who is running the Linux version of Workshop 8.1have
troubling
getting the Design View of JSP files to come up. All I see is thesource,
with
no tabs at the bottom to switch to/from the Design View. When I bootover
to
Windows and run 8.1 Workshop, I see both tabs and I am able to useboth
views.
Is it something I have set in Preferences somewhere that disablesthe
Design
View ???
Thanks,
Jeff

JSP Custom tag not working correctly for multiple users

I am doing some support work for an existing web system. When doing single user access (a custom tag is called within the JSP); the output of the Custom tag is fine. However, during multiple user access to the JSP, as I could see on the log files, 2 users access the custom tag at exactly the same time- the output of one of the users was incorrect. The custom tag btw, uses TreeMap, Stringbuffer and does not have a body, only attributes passed to it. It takes an input file and a Hashmap as input attributes and it sets a string in the page context which is later being used in the JSP. No error is logged, its just that the string produced(placed in the page context) is incorrect. This only happens when this tag is called at same time(when multiple users accessing the page) Has anyone encountered this problem? Is there a known pooling/thread problem with custom tags?

in a servlet/jsp (a jsp is compiled into a servlet),
the class atrributes are shared. only the
variables declared in the doservice (doGet or doPost)
method are threadsafe.
post your jsp plzhere's the snippet of the jsp code:
<%@ page language="java"
errorPage="Error.jsp"
autoFlush="false"
buffer="128kb"
import="java.text.*,
java.math.BigDecimal,
java.rmi.RemoteException,
java.util.*,
java.io.*,
%>
<%@ include file="Secure.jsp" %>
// a set of request.getParameter are being called here
HashMap myMap = new HashMap();
myMap.put(xmlDPhoneNumber, dPhoneNumber);
myMap.put(xmlDPhoneType, "D");
myMap.put(xmlDPhoneExt, dExtension);
myMap.put(xmlDPhoneDigits, dPhoneDigits);
// other myMap putting of key values are called here
%>
<test:applyCustomerSearchValues id="resultXml" xmlTemplate="/xml/message/CustomerUpdateRequest.xml"
xmlMap="<%= myMap %>" />
<test:transformXMLString id="customerUpdateRequest"
xmlString="<%= resultXml.toString() %>"
xslFileName="/xsl/message/CustomerCreateRequest.xsl"
paramMap="<%= PMap %>"/>
now here's the thing: the xml produced by test:applyCustomerSearchValues is resultXml which is used in test:transformXMLString. I got no problem with the output of test:transformXMLString. I am sure that a phone number is being passed into the former as part of the HashMap key-value. However when test:applyCustomerSearchValues is called when 2 users access the jsp, it seems like the the first xml produced does not have the phone number in it - but the other has it. The xml is OK for both users, its just that the values of the HashMap do not seem to be passed correctly into the xml produced.
--- here's the snippet of the log, the first httpWorkerThread-80-6 does not have the phone number, however the second one-httpWorkerThread-80-7 has the phone number. The first one should also have a phone number as in the start of the log, the number was listed, but as the system called the test:applyCustomerSearchValues tag, the number was not included. There are different phone numbers for the 2 users. The odd thing here is, the userID which is the 'LastUpdatedBy' element has been set correctly. The userID is being fetched from a session attribute while the phone number is fetched from a request parameter, both are being placed in the HashMap attribute passed to the custom tag.
2007-06-05 10:55:41,954 DEBUG [httpWorkerThread-80-6] (?:?) - ApplyCustomerSearchValuesTag : String produced is :<Values><Customer>
<Status>
     <CustomerType></CustomerType>
     <FirstContactDate>2007-06-05</FirstContactDate>
     <StatusFlags>
          <Fraud>N</Fraud>
          <BadCheck>N</BadCheck>
          <BadCredit>N</BadCredit>
          <DoNotMerge>N</DoNotMerge>
          <ARHoldRefundCheck>N</ARHoldRefundCheck>
     </StatusFlags>
     <LastUpdatedDateTime>2007-06-05 10:55:41</LastUpdatedDateTime>
     <LastUpdatedBy>5555</LastUpdatedBy>
     <OPAlertClass></OPAlertClass>
     <MailListStoreID></MailListStoreID>
     <OriginatingSource>CSA</OriginatingSource>
</Status>
<DPhone id="D">
     <DPhoneNumber></DPhoneNumber>
     <DPhoneDigits></DPhoneDigits>
     <DPhoneType></DPhoneType>
     <DExtension></DExtension>
     <DAreaCode></DAreaCode>
     <DPhoneCountryCode></DPhoneCountryCode>
</DPhone>
</Customer>
</Values>
2007-06-05 10:55:41,954 DEBUG [httpWorkerThread-80-7] (?:?) - ApplyCustomerSearchValuesTag : String produced is :<Values><Customer>
<Status>
     <CustomerType>N</CustomerType>
     <FirstContactDate>2007-06-05</FirstContactDate>
     <StatusFlags>
          <Fraud>N</Fraud>
          <BadCheck>N</BadCheck>
          <BadCredit>N</BadCredit>
          <DoNotMerge>N</DoNotMerge>
          <ARHoldRefundCheck>N</ARHoldRefundCheck>
     </StatusFlags>
     <LastUpdatedDateTime>2007-06-05 10:55:41</LastUpdatedDateTime>
     <LastUpdatedBy>1840</LastUpdatedBy>
     <OPAlertClass></OPAlertClass>
     <MailListStoreID></MailListStoreID>
     <OriginatingSource>CSA</OriginatingSource>
</Status>
<DPhone id="D">
     <DPhoneNumber>(123) 123-4788</DPhoneNumber>
     <DPhoneDigits>1231234788</DPhoneDigits>
     <DPhoneType>D</DPhoneType>
     <DExtension></DExtension>
     <DAreaCode>123</DAreaCode>
     <DPhoneCountryCode>US</DPhoneCountryCode>
</DPhone>
</Customer>
</Values>
Message was edited by:
Mutya

Can't find Design View for JSP page on Unix

I'm using weblogic workshop to develop page flow on Solaris, and I can't find the Design View tab to build
JSP page. I searched all menus and can't find one to enable this function. Is this function supported on Unix?
Thanks
Zhong

Zhong--
Unfortunately, no; Workshop 8.x does not support design view on UNIX.
Eddie

Entering custom backend service in Design Time for Processes and Forms

Hi all,
I am trying to create a form that have 3 fields:
1. pernr
2. ename
3. effective_date
I done all the necessary setup of BADI ,class, interface and form.
However I cannot seem to insert my custom backend service in the Design Time for Processes and Forms workbench (t-code:hrasr_dt).
Currently, I am just using SAP_PA for my backend service which is unable to load the ename into my form. The code in my custom class will not be triggered if I did not use my custom back end service in the Design Time for Processes and Forms.
Whenever I tried using my custom back end service, I will encounter the assertion_failed dump.
Anyone have any idea?
Edited by: Siong Chao on Dec 22, 2010 6:35 AM

Hi Siong Chao,
The filter name you have used in the BADI for your generic service requires to be defined in the Create / Edit Generic Service - Definition.( You can see this on selecting the Back-end services node under Form Scenario definition while using HRASR_DT transaction code)
Once you do that, you can import the fields defined in the Generic service BADI - using the same procedure used in standard SAP backend sevices.
Hope this clarifies. Please let me know if you have any further questions.
Best Regards
G Raj

Design Time for Processes and Forms

Hi experts,
When trying to open "Design Time for Processes and Forms" in order to create a process, I get a dump.
Could you let me know what could be wrong ? config? etc..
Hereunder is a sample of what I found in T.code ST22
The following checkpoint group was used: "No checkpoint group specified"
If in the ASSERT statement the addition FIELDS was used, you can find
the content of the first 8 specified fields in the following overview:
" (not used) "
" (not used) "
" (not used) "
" (not used) "
" (not used) "
" (not used) "
" (not used) "
" (not used) "
    referenced node must exist
      READ TABLE object_hierarchy_nodes TRANSPORTING NO FIELDS
                 WITH KEY node_id = object_hierarchy_node_wa-ref_node_id
>>>      ASSERT sy-subrc = 0.
    ENDIF.
provider has to be specified (except in case of recursion)
    IF object_hierarchy_node_wa-ref_node_id IS INITIAL.
      ASSERT object_hierarchy_node_wa-provider_id IS NOT INITIAL.
    ENDIF.
Thanks in advance,
Louis

note: Note 1075650
Re: Assertion_Failed dump when accessing Design Time for Processes & Forms EP3
regards,
Prakesh.

Assertion_Failed dump when accessing Design Time for Processes & Forms EP3

After exhausting SAP note searches and the SDN community forums, blogs & wiki searches, I decide to make my first SDN post:
After installing Enhancement Pack 3 to the base ECC 6.0, we got the Design Time for Processes & Forms node in the IMG under HR Administrative Services. I was able to get in to it the very first time without any issues; however once I selected one of the sample SAP processes, I received an "Assertion_Failed" dump in the section of code saying a referenced node must exist. In debugging, we did see a node that is referencing a node that does not exist, which is causing the dump. The dump occurs in CL_HRASR00_DT_OBJECT_BROWSER, Method ASSERT_OBJ_HIER_IS_CONSISTENT (line 71).
I now get this dump each time I try to execute the Design Time for Processes & Forms node in the IMG. Note: when accessing process the old way, there is no issue.
To me is seems like either EP3 was not installed completely, something went wrong in the activation of those business functions, or the copy of the sample forms from client 000 did not grab everything. In debugging, it appears that the missing reference node is related to some form scenario node. Also note that all the steps under Technical Settings were completed.
Has anyone seen this issue before?
Thanks for any help you can give. If I find the solution, I will post the answer here as well.
-Jeff Glynn
Edited by: Jeffrey Glynn on Oct 22, 2008 1:54 AM

Hi Jeff,
I believe we had the same issue here.
There is an SAP Note (below) for this. Please let me know if this works.
Note 1075650 - New Design Time tool Corrections for the dump
Note Language: English Version: 1 Validity: Valid from 18.07.2007
Summary
Symptom
Dump on executing the transaction HRASR_DT which starts the new design time
tool of the HR Administrative services
More Terms
Design time tool HRASR_DT HRadmin
Cause and Prerequisites
Solution
The solution to the dump occuring would be resolved by applying the SP
Alternately the dump can be
resolved by performing the following steps manually :
1.Start SE16 transaction
2.Give the table name as T5ASRDTOBJHIER and press RETURN key
3.Execute the Selection screen by pressing on F8 Key
4.Select the following entries:
i. OBJECT TYPE = PROCESS and NODE TYPE = PROC_REF_FSCN_DIRECT
ii.OBJECT TYPE = PROCESS and NODE TYPE = PROC_REF_FSCN_DIRECT_START
5. Click on EDIT entries button on the header
6. Enter in the field REF_OBJECT_TYPE the value as FORM_SCENARIO
7. Click on the Next button on the header bar to navigate to the next entry
8. Repeat Step 6 for this entry also
9. Save the modification
Additionaly, perform the following steps as well:
1.Start SE16 transaction
2.Give the table name as T5ASRDTTOOLS and press RETURN key
3.Execute the Selection screen by pressing on F8 Key
4.Click on CREATE entry button on the header
5.Enter the following to create a new entry:
TOOL TYPE = FSCN_MSG_MAPPER
OPERATION = DISPEDIT
TOOL CLASSNAME = CL_HRASR00_DT_FST_MESSAGE_MAP
6. Enter the following to create a new entry:
TOOL TYPE = PROC_EXEC_FREQUENCY
OPERATION = DISPEDIT
TOOL CLASSNAME = CL_HRASR00_DT_PRT_EXEC_FREQ
7. Save the new entries
These adjustments should resolve the dumps hindering to start the new
design time tool

Can anyone write a actionscript for flash project

Hi All,
Can anyone write a Actionscript for my project.
I want to develop my project with the flash.
My project scenario is, I have total no of 60 (.swf) flash
movies and are about to take 4 to 5 minutes each, my aim is to
display 20 .swf files randomly at a time on the screen.
i.e., if we click on a button for the first time, it should
display a 20 flash movies on the screen and when we click for the
second time it should display other set of 20 flash movies it may
or may not repeat the previous ones. It means every person should
be displayed with a different set of flash movies, no two persons
can get the same set of movies. The movies should be randomly
selected.
Could you please direct me to meet my scenario, could you
please write a script for my flash.
Thank you for your precious time.

Ndippy,
Folks on here are pretty good about helping out others who
are trying to learn actionscript, or have trouble with
understanding concepts. They are less likely to volunteer to do an
entire project for you. I'd suggest trying to do it yourself, and
asking specific questions about the process. Both of your posts are
way to general to allow anyone to give advice that would be
worthwhile. You have said that you have 60 .swfs in your first
post. However, in your second, you said they were 60 quicktime
files. There are very different processes for each option there.
Are you planning to display 20 at once, or let people scroll
through them? What size are your clips and what size are you
developing for?
Start small, like just trying to load one movie clip
randomly, and then work your way up. Experiment with changing the
positions, sizes, etc. When you run into trouble, ask a specific
question about what you are trying to do, and people will be happy
to help.

Can't write cache file for while creating domain in soa 11.1.1.5 on HP-UX

Hi,
Installing SOA 11.1.1.5 on HP-UX and during domain creation/configuration I am getting the below errors
**sys-package-mgr: can't write cache file for**
and have lots of cache file errors for different packages
Any idea what might be wrong and whats the cause of these errors and is it safe to ignore these errors if not what is the work arround. As I already looked at the below post but I don't find */var/tmp/wlstTemp* on my machine as suggested in the post below.
SOA 11.1.1.5 install got can't write cache file
So wondering if there's anything else I can do i.e. while creating or configuring a Domain pass some parameter to config.sh etc.
Thanks

Hi,
I don't see python.cachedir in config.sh. Here is config.sh
#!/bin/sh
mypwd="`pwd`"
# Determine the location of this script...
# Note: this will not work if the script is sourced (. ./config.sh)
SCRIPTNAME=$0
case ${SCRIPTNAME} in
/*) SCRIPTPATH=`dirname "${SCRIPTNAME}"` ;;
*) SCRIPTPATH=`dirname "${mypwd}/${SCRIPTNAME}"` ;;
esac
# Set the ORACLE_HOME relative to this script...
ORACLE_HOME=`cd "${SCRIPTPATH}/../.." ; pwd`
export ORACLE_HOME
# Set the MW_HOME relative to the ORACLE_HOME...
MW_HOME=`cd "${ORACLE_HOME}/.." ; pwd`
export MW_HOME
# Set the home directories...
. "${SCRIPTPATH}/setHomeDirs.sh"
# Set the config jvm args...
CONFIG_JVM_ARGS="${CONFIG_JVM_ARGS} -DCOMMON_COMPONENTS_HOME='${COMMON_COMPONENTS_HOME}'"
export CONFIG_JVM_ARGS
# Delegate to the main script...
"${WL_HOME}/common/bin/config.sh" "$@"Thanks

How can identify the default currency for a customer?

How can identify the default currency for a customer?
I know that this is being determined when you create a sales order for a particular customer, for example, so I could break this process open and find out what it uses. But I thought it worth asking in this forum first.
Blue

Hi Gary,
As per my understanding of your question I am replying , If you are looking some thing else then I request you to please elaborate your query.
If you see the BP sales area data in transaction BP, In billing tab you maintain the currency for a customer which is default currency when you create a sales order.
<b>Reward points if it helps!!</b>
Best regards,
Vikash

Create Adobe Form using Design Time for Processes and Forms

Hi all,
I am trying to create a form that have 3 fields:
1. pernr
2. ename
3. effective_date
I done all the necessary setup of BADI ,class, interface and form.
I need the step to step guide where you create the adobe form using the Design Time for Processes and Forms. Anyone have any idea?
Edited by: Siong Chao on Jan 3, 2011 4:54 AM
Edited by: Siong Chao on Jan 3, 2011 5:00 AM

Hi,
I couldn't get to your query..
What do you mean by step by step procedure for a design time & process for forms.
if you are a beginner and looking for basic examples to implement adobe forms there are lot of them in SDN, please search them.
let me know if your query was a very specific one.
Cheers,
Sai

How can we write the code for opening the command prompt and closing the

how can we write the code in java for opening the command prompt and closing the cmd prompt from eclipse (cmd prompt should close when click on the turminate button in eclipse)

rakeshsikha wrote:
how can we write the code for opening the command prompt and closing theBy typing in Eclipse (which you seemingly have)?

How can i write the trigger for Global Temporary Table

Hi Grus,
How can i write the trigger for Global Temporary Table.
I was created the GTT with trigger using the below script .
CREATE GLOBAL TEMPORARY TABLE GLOBAL_TEMP
EMP_C_NAME VARCHAR2(20 BYTE)
ON COMMIT PRESERVE ROWS;
CREATE OR REPLACE TRIGGER TRI_GLOBAL_TEMP
BEFORE DELETE OR UPDATE OR INSERT
ON GLOBAL_TEMP
REFERENCING NEW AS NEW OLD AS OLD
FOR EACH ROW
BEGIN
INSERT INTO EMPNAME VALUES (:OLD.EMP_C_NAME);
END;
trigger was create successfully, but the wouldn't insert into to EMPNAME Table..
Please guide whether am correct or not? if not kindly give a correct syntax with example
Thanks in Advance,
Arun M M

BEGIN
INSERT INTO EMPNAME VALUES (:OLD.EMP_C_NAME);
END;
you are referencing old value in insert stmt.
BEGIN
INSERT INTO EMPNAME VALUES (:new.EMP_C_NAME);
END;then run ur application it works fine...
CREATE GLOBAL TEMPORARY TABLE GLOBAL_TEMP
EMP_C_NAME VARCHAR2(20 BYTE)
ON COMMIT PRESERVE ROWS;
CREATE OR REPLACE TRIGGER TRI_GLOBAL_TEMP
BEFORE DELETE OR UPDATE OR INSERT
ON GLOBAL_TEMP
REFERENCING NEW AS NEW OLD AS OLD
FOR EACH ROW
BEGIN
dbms_output.put_line(:OLD.EMP_C_NAME||'yahoo');
INSERT INTO EMPNAME VALUES (:new.EMP_C_NAME);
dbms_output.put_line(:OLD.EMP_C_NAME);
END;
create table EMPNAME as select * from GLOBAL_TEMP where 1=2
insert into GLOBAL_TEMP values('fgfdgd');
commit;
select * from GLOBAL_TEMP;
select * from EMPNAME;
output:
1 rows inserted
commit succeeded.
EMP_C_NAME
fgfdgd
1 rows selected
EMP_C_NAME
fgfdgd
1 rows selectedgot it Arun
Edited by: OraclePLSQL on Dec 28, 2010 6:07 PM

Will my mac back up to time machine wile it is on but shut (asleep) and can you set a time for backups???

will my mac back up to time machine wile it is on but shut (asleep) and can you set a time for backups???

If your Mac Model supports POWERNAP under Mountain Lion, yes backups and software updates can occur while the mac is taking a power nap (kind of light sleep).

Design Time for processes and forms : Short Dump

Hi All,
When I try to execute Design Time for processes and forms - (tcode :HRASR_DT), I am getting below short dump.
The following syntax error occurred in program
"CL_HRASR00_DT_FSCN_PD_DATA====CP " in include
"CL_HRASR00_DT_FSCN_PD_DATA====CM00E " in
line 177:
"The obligatory parameter "FORM_SCENARIO_VERSION" had no value assigned"
" to it."
Please suggest what could resolve this.
Thanks.
Tejas

note: Note 1075650
Re: Assertion_Failed dump when accessing Design Time for Processes & Forms EP3
regards,
Prakesh.

Can I write Design-time for JSP custom tag(not JSF components)

Similar Messages

Maybe you are looking for