Can intermedia be used to index the results of a query

The objective is to search for a key word in the results from two different tables got by a jointed query

Or, you could try something like
select ...
from contextIndexedTable
where contains(textColumn, 'keyword') > 0
and rowid in
(select rowid from contextIndexedTable
where contains(textColumn, 'origquery') >0)
Should work, but not sure how it will perform. You could also place the rowids
from the original query into a temporary table and modify the query above to join to that first-level table instead of re-running the query. That may perform better.
If your original query is all text, you can
simply extend the text query:
(originalquery) AND (newquery)
but I get the sense that the original query involves structured conditions.

Similar Messages

Creating index using XMLIndex, changes the result set when querying

Hi there,
I was tasked with populating an Oracle 11Gr2 database with data from 800,000 XML files. I used the Oracle documentation, and in about 2 days I had the data loaded into a simple table.
Queries of this table were SLOW, so this morning I read about using XMLIndex to index the table... I did this, and it works great -- the queries got a LOT faster.
However -- a "column" from my XML data is supposed to return values of 2000-4000 characters. It worked fine, until I created my index -- after I created the XMLIndex, the data is being truncated to 80 chars in my query.
CREATE TABLE TEST_XMLTABLE OF XMLType; /* XML data has a "node" called TEXT which can be up to 4000 chars */
SELECT to_number( extractValue(OBJECT_VALUE, 'newsitem/@itemid')) as ITEM_ID, Text.text <----- value here will contain full text body up to 4k chars
FROM TEST_XMLTABLE KTX,
XMLTABLE('/newsitem' PASSING ktx.Object_Value columns "TEXT" clob PATH 'text') TEXT
/* now create the index */
CREATE INDEX IDX_xmlindex ON TEST_XMLTABLE (OBJECT_VALUE) INDEXTYPE IS XDB.XMLIndex;
Now, run my query again, and TEXT.TEXT is truncated to only 80 chars!?!?!
I'm not sure what to do next... my users need the full text, so for now I have dropped the XMLIndex... the queries are slow, but they are getting all the data.
Thanks in advance for any help or ideas.
Keith

I still do not have an answer back from Oracle, regarding if this is a "bug" or not....
but for now, I have a "workaround" that seems to fix the problem. After I create the XMLIndex, I can remove the troublesome "path" from the index by doing an index rebuild, as shown:
ALTER INDEX IDX_xmlindex REBUILD PARAMETERS ('PATHS (EXCLUDE ADD (/newsitem/text))');
After I rebulld the index, I get all the chars in my TEXT node properly. However, the performance of the queries is noticably slower than before I did the ALTER INDEX.. albeit still faster than with no index at all.

Using the results of one Query in a workbook as a filter in another query

Hello!
I'd like to have one workbook which my users can execute and the result from one Query (e,g, Customer Account Number) will then be used as a filter in a second query (which would be from a different cube).
Can this be done?
Cheers.

Hi,
As far as I understand your requirement, you want to pass the result of one query to another query as a filter.
Well you can do this, by Using Replacement Path Variable.
For e.g. you want to pass Values of Custmomer Account Number to another query. In the second query, create one variable on Customer Account Number with type Replacment Path. Here it will ask you to enter the name of the query from which you would like to take the values of Customer Account Number.
When you will run the second query , it will execute the first query from which you want to read the customer accoutn number in the back-end. And it willl display the output the second query as per the valeus of customer account number.
This will help.
- Jaimin

How can 2 people use itunes in the same household? we both have iphone 4 and separate id but the same itunes? pleasehelp

how can two people use itunes in the same household? i had a iphone before so alreday had an itunes account now me and my husband have upgraded and we now both have them. he has set up a username and i have mine yet when he logs in he seems to just get my account? please help

Decide which iPhone will be keeping the current iCloud account. On the one that will be changing accounts, if you have any photos in photo stream that are not in your camera roll or backed up somewhere else save these to your camera roll by opening the photo stream album in the thumbnail view, tapping Edit, then tap all the photos you want to save, tap Share and tap Save to Camera Roll. If you are syncing Notes with iCloud, you'll also have to email your notes to yourself so they can be recreated in the new account as they cannot be migrated.
Once this is done, go to Settings>iCloud, scroll to the bottom and tap Delete Account. (This will only delete the account from this phone, not from iCloud. The phone that will be keeping the account will not be effected by this.) When prompted about what to do with the iCloud data, be sure to select Keep On My iPhone. Next, set up a new iCloud account using a different Apple ID (if you don't have one, tap Get a Free Apple ID at the bottom). Then turn iCloud data syncing for contacts, etc. back to On, and when prompted about merging with iCloud, choose Merge. This will upload the data to the new account.
Finally, to un-merge the data you will then have to go to icloud.com on your computer and sign into each iCloud account separately and manually delete the data you don't want (such as deleting your wife's data from your account, and vice versa).

How do you use BOBJ SDK to retrieve the results of a query in XML

I am trying to programatically get the results of a query given the query id
My old code used BusinessObjects Enterprise Web Services API to Retrieve a document's contents
DocumentInformation biDocInfo;
RetrieveData retBOData = RetrieveData.Factory.newInstance();
Action[] actions = new Action[1];
retBOData.setRetrieveView(xmlView);
biDocInfo = rEngine.getDocumentInformation(queryId, null, actions, null, retBOData);
(XMLView) biDocInfo.getView();
Is there an equivalent way to retrieve the results of the query using SAP BusinessObjects BI 3.x Developer SDK Library ?
Thanks for any information

Hello.
Are you wanting to use the BusinessObjects Enterprise SDK along with the Report Engine SDK as opposed to using the Web Services SDK that you were using previously?
Also, what part of a webi document are you trying to get the XML format of?
- Whole document
- Single report within a document
- Report page of a report
- Report part within a report
- All data providers
- Single data provider
If you are trying to use Business Objects Enterprise along with the Report Engine SDK, there are numerous samples for the various parts of the webi document that I mentioned above available at the following link:
http://wiki.sdn.sap.com/wiki/display/BOBJ/JavaReportEngineSDKSamples
I hope that this information helps.
Regards.
- Robert

I bought the Adobe Photoshop Classroom in a Book for CS6 by accident and I have CC. I know, stupid mistake. But I can't take return the book. Is is similar enough to CC that I can still get use out of the book? Thank you so much

I bought the Adobe Photoshop Classroom in a Book for CS6 by accident and I have CC. I know, stupid mistake. But I can't take return the book. Is is similar enough to CC that I can still get use out of the book? Thank you so much

Each version of Adobe products builds upon the previous ones. Some things like filters and advanced features may evolve or become deprecated over time, but the basic tools have remained pretty much the same for decades. As long as you know there are subtle differences between versions, I think you will still get a great deal of value from C in a B for CS6.
Also refer to the CC online tuts
Photoshop CC tutorials | Learn how to use Photoshop CC
Learn Photoshop CC | Adobe TV
Nancy O.

Why the bottom of the screen of my ipod can not be used to open the application but the application could be to shift

why the bottom of the screen of my ipod can not be used to open the application but the application could be to shift, please help me

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup. See:
iOS: Back up and restore your iOS device with iCloud or iTunes
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

I can no longer use all of the "Computer Management" tools against a remote computer. "Local Users and Groups", "Event Viewer", "Performance Logs and Alerts" and "Device Manager"

Hello All,
I can no longer use all of the "Computer Management" tools against a remote
computer. "Local Users and Groups", "Event Viewer", "Performance Logs and
Alerts" and "Device Manager"
kindly see the below snapshot for assistance
REGARDS DANISH DANIE

This link may help....
http://windowsxp.mvps.org/admintools.htm
Freeman

He writes that my phone ID, can not be used to activate the phone. my ID, was used from the start. help

He writes that my phone ID, can not be used to activate the phone. my ID, was used from the start. help

Welcome to the Apple community.
Unfortunately, you cannot do very much with your phone unless you get assistance from the previous owner, they should either provide you with the password to unlock it or remove their account from the phone entirely remotely through iCloud.com > Find My Phone.

MAC Mail: I have 2 accounts set up. I used to be able to add attachments to both accounts, but now I can only attach using 1 of the accounts. The other one doesn't work.

MAC Mail: I have 2 accounts set up. I used to be able to add attachments to both accounts, but now I can only attach using 1 of the accounts. The other one doesn't work.

Try unmounting the volume on your iMac using Disk Utility. Then mount it again. You may need to reboot the laptop or relaunch its Finder process (using the Force Quit window) after remounting the drive on your iMac. Remember that no process may be accessing any files on the drive you plan to unmount, or the unmount will fail. Unmounting and remounting an external drive on my iMac made it become visible on my MacBook Pro after it had disappeared.

Hi; I lost my iPhone4!!! How can i block the device so it can´t be used to see the important notes and contacts inside???

Hi; I lost my iPhone4!!! How can i block the device so it can´t be used to see the important notes and contacts inside???

You cannot unless you had find my iphone activated on the iphone before it was lost.
MobileMe: Find My iPhone overview

If I buy an iPad2 in the USA can I still use it in the UK?

If I buy an iPad2 in the USA can I still use it in the UK? Thank you

Yes, but you will need the wall charger adapter for UK as the USA has two prong and not three.

Can Java be used to manipulate the Windows registry?

Can Java be used to manipulate the Windows registry? If so, can someone point me to some examples?
Thanks!

There is no supplied capability to do this, because the registry is Windows platform specific.
It might be possible by making the call through a native Windoze app.

How to execute a procedure depending on the result of a query?

Hello, I'm new in ODI.
I want to execute a procedure depending on the result of a query Oracle table.
We have a Oracle Table whit a column that contains two possibles values.
I want read the table, row by row, and depending on this value, execute a Procedure or execute another.
How can i do?

what you need to do is
1. create a variable which "new_var2" which has the count of the number of rows you want to process. must be data type numeric.
2. copy "new_var2" to the package screen.
3. duplicate the "new_var2" on the package screen and evaluate the variable and test for "> 0" zero, call it "new_var2_E"
3. create a new odi variable "new_var1" with a refresh of "select field1 fom (select field1,rownum as rownumber from tablex) where rownumber = #new_var2" in the relevant schema and technology.
4. copy "new_var1" into your package (some where in the flow)
5. right click the "new_var1" variable in you package screen and you should get the option duplicate step (click on that)
6. select the the duplicate "new_var1" on the package screen and correct the the name to something meaning full to you "new_var1_E", also change the "type" to "evaluate variable" then you should see a "value" box. enter one of the values you want to test in the box (remember do not put in quotes ' )
7. now back on the package screen join the "new_var1" to the "new_var1_E" with an OK line
8 you now join "new_var2" to "new_var2_E" with OK
9 you join "new_var2_E" to "new_var1"
10. you then join the "new_var1_E" with an OK or a KO line to the relevant procedure.
12. you need to duplicate "new_var2" in the package screen one more time this time and call it "new_var2_D" set the type to evaluate and then select the increment of -1
13. the relevant procedure to "new_var2_D" with an OK
14. join the "new_var2_D" to the "new_var2_E" with an OK
15. this should close off the loop now the exit point is "new_var2_E" with a KO line to the next part of your process....
Basically you should end up with a loop on new_var2 decementing, and it is used to get a specific next record row from your table.
Hope this helps, sorry it is a little long winded..
Edited by: DavidGD on Feb 8, 2009 3:29 PM

I need return the result of a query on a stored procedure

I need return the result of a query on a stored procedure, I mean when I execute a stored procedure it returns a result set as a select query.
Best regards...

If you want some pl/sql code that can be used in a query as it were a table you may be interested in table functions:
SQL> create or replace type
2 t_emp is object (
3 name            varchar2(30),
4 hire_date date,
5 salary       number);
6 /
Tipo creato.
SQL> create or replace type
2 t_emptab is table of t_emp;
3 /
Tipo creato.
SQL> create or replace function tab_fun(p_dept in number)
2 return t_emptab is
3 e t_emptab;
4 begin
5    select t_emp(ename,hiredate,sal)
6      bulk collect into e
7      from emp
8     where deptno=p_dept;
9
10    return dip;
11 end;
12 /
Funzione creata.
SQL> select *
2 from table(tab_fun(20));
NAME                           HIRE_DATE SALARY
SMITH                          17-DIC-80        800
JONES                          02-APR-81       2975
SCOTT                          09-DIC-82       3000
ADAMS                          12-GEN-83       1100
FORD                           03-DIC-81       3000A procedure cannot be used in a select statement.
Max
http://oracleitalia.wordpress.com

Can intermedia be used to index the results of a query

Similar Messages

Maybe you are looking for