Can modprobe.d conf files be multiline?

Hey
i've created a fglrx.conf file which has two lines, one which blacklists radeon and one that load the fglrx module. However, I get the following output, so it doesn't seem to happy
libkmod: kmod_config_parse: /etc/modprobe.d/fglrx.conf line 2: ignoring bad line starting with 'fglrx'
If i need to split it into two files, how do I ensure that one file is parsed before the other? (so the blacklist comes first)

loading modules is done via /etc/modules-load.d/, /etc/modprobe.d/ is only for setting module parameters or blacklisting.

Similar Messages

[SOLVED]No audio after a reboot, can't find conf files to modify.

The first time i installed alsa packets everything went fine, i had audio from my external usb audio card "AudioBox" and i watched some youtube videos on Firefox. After a reboot my audio was gone, i tried to follow the wiki to set my AudioBox 22 as default again, but the conf files listed in the wiki (alsa conf and asound.conf) don't exist. This is the output of aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: SB [HDA ATI SB], device 0: ALC662 rev1 Analog [ALC662 rev1 Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: HDMI [HDA ATI HDMI], device 3: HDMI 0 [HDMI 0]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: HDMI [HDA ATI HDMI], device 7: HDMI 1 [HDMI 1]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: HDMI [HDA ATI HDMI], device 8: HDMI 2 [HDMI 2]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: HDMI [HDA ATI HDMI], device 9: HDMI 3 [HDMI 3]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: HDMI [HDA ATI HDMI], device 10: HDMI 4 [HDMI 4]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: HDMI [HDA ATI HDMI], device 11: HDMI 5 [HDMI 5]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 2: VSL [AudioBox 22 VSL], device 0: USB Audio [USB Audio]
Subdevices: 1/1
Subdevice #0: subdevice #0
cat asound output
cat /proc/asound/modules
0 snd_hda_intel
1 snd_hda_intel
2 snd_usb_audio
Last edited by JebKerman (2014-04-25 10:02:47)

emeres wrote:It is recommended to use vid and pid with modprobe options, since multiple cards use the same module.
Thank you, i had some problems with my "solution" lxmusic was mute, after using the vid and pid in the conf now it works again

Pacman.conf file syntax highlighting for nano

Hi, here is pacman.conf file syntax highlighting for nano. It may be useful for those who edit their pacman.conf regularly.
Just put this lines in the end of your /etc/nanorc or ~/.nanorc file:
# syntax highlithing in pacman.conf
syntax "pacman.conf" "pacman\.conf$"
color brightwhite start="\[" end="\]"
color brightyellow ".*="
color brightred "=.*"
color white "="
color brightblue "\[|\]"
color brightcyan start="/|http|ftp" end=".*"
color green "#.*"
In this thread you can find rc.conf file syntax highlighting.

thank you! i always accidentally open up nano, find out text is practically unreadable with its default colours, close it and then wait the horrific 4 seconds it takes for emacs to spring to life.

[Solvedish] Can color depth be changed in X with no xorg.conf file?

I have a laptop that's working perfectly with no xorg.conf file except for the color depth is at 16 and I want it at 24. Can color depth be changed in X with no xorg.conf file? (I already tried the amazing three line xorg.conf file to no avail.)
Last edited by skottish (2008-03-09 03:15:11)

Won't work on a running X session, and has the same effect as the aforementioned xorg.conf file if run before starting X.
I may just have to make a new xorg.conf file. The last one decided it hated some upgrade I made and started wreaking havoc all over my system. Crashes and lockups and flickers galore!
--EDIT--
It turns out that the xf86-video-intel driver was my problem all along. I reverted to the i810 driver and my xorg file works again (it has more than three lines).
Last edited by skottish (2008-03-09 03:16:45)

How can I stop Lion from overwriting my apache conf files

I am at the point of abandoning OS X forever and returning to loading NetBSD on macs. I have never been so angry at a piece of Apple software.
On reboot, the server completely wiped out my apache configuration and rebuilt it. Thankfully I had backups.
How I can prevent Lion from interfering with my apache setup? I will NEVER use that crappy admin tool again. Webmin is FAR superior to it if I need a GUI tool. I can live in the shell very happily. I don't want to have to install a new webserver from source if I can avoid it. I just want to stop Lion from destroying my conf files.
How do I wrest control from this monster?

All we did was not modify httpd.conf other than adding an include at the end. If you put your content in other files, it doesn't seem to mess with them.

[Solved] Can't boot up due to error in a conf file

After trying to install kpd it seems that the /etc/kpd.conf file contains an error. After restarting the computer I see an error when it is booting up. Then on the login screen when I type my username for every key pressed 3 chars are show ie username => foo output => fffoooooo.
Coming from a ubuntu I figured I would just restart in simple/safe mode, but there doesn't seem to be one, or at least I don't have one on the boot screen.
I am lost to how ti fix the config file. Anyone have some advice?
Thanks for the help.
Last edited by iso (2009-02-08 16:53:25)

iso wrote:
After trying to install kpd it seems that the /etc/kpd.conf file contains an error. After restarting the computer I see an error when it is booting up. Then on the login screen when I type my username for every key pressed 3 chars are show ie username => foo output => fffoooooo.
Coming from a ubuntu I figured I would just restart in simple/safe mode, but there doesn't seem to be one, or at least I don't have one on the boot screen.
I am lost to how ti fix the config file. Anyone have some advice?
Thanks for the help.
If you still have the ubuntu live cd lying around, you could probably try that out.

/etc/modprobe.d/*.conf does not work

I want to pass an option to a kernel mod on bootup. Specifically I want to alter the polling rate of the USB mouse to 500hz, by passing the options usbhid mousepoll=2 to usbhid mod.
I added a new file to /etc/modprobe.d/ called usbhid.conf with the following contents:
options usbhid mousepoll=2
And by executing at runtime:
sudo modprobe -r usbhid && sudo modprobe usbhid
Then the mouse correctly runs at 500hz.
So the conf file works if I execute it manually, but it doesn't get executed on bootup even though I have modconf on the HOOKS= in /etc/mkinitcpio.conf.
Anyone knows what's wrong and why this doesnt work, or how I can debug it to find it out by myself?
Last edited by Nektarios (2014-02-13 12:25:20)

Yes it is.
lsinitcpio -l /boot/initramfs-linux.img | grep modprobe
./usr/bin/modprobe
./usr/lib/modprobe.d
./usr/lib/modprobe.d/usb-load-ehci-first.conf
./etc/modprobe.d
./etc/modprobe.d/vmware-fuse.conf
./etc/modprobe.d/uvesafb.conf
./etc/modprobe.d/modprobe.conf
Maybe I'm missing something here or it's a copy paste error but you said it's called usbhid.conf, that's not in this list.
See: https://wiki.archlinux.org/index.php/mk … activation to rebuild your image.

How can i wrote configuration file in Log4j

iam new log4j .i have seen one small programme in log4j examples folder ..i e. shown below
Sort.java
=====
package examples;
import org.apache.log4j.PropertyConfigurator;
import org.apache.log4j.Logger;
import org.apache.log4j.Priority;
Example code for log4j to viewed in conjunction with the {@link
examples.SortAlgo SortAlgo} class.
This program expects a configuration file name as its first
argument, and the size of the array to sort as the second and last
argument. See its source
code for more details.
Play around with different values in the configuration file and
watch the changing behavior.
Example configuration files can be found in <a
href="doc-files/sort1.properties">sort1.properties</a>, <a
href="doc-files/sort2.properties">sort2.properties</a>, <a
href="doc-files/sort3.properties">sort3.properties</a> and <a
href="doc-files/sort4.properties">sort4.properties</a> are supplied with the
package.
If you are also interested in logging performance, then have
look at the {@link org.apache.log4j.performance.Logging} class.
@author Ceki Gülcü */
public class Sort {
static Logger logger = Logger.getLogger(Sort.class.getName());
public static void main(String[] args) {
 if(args.length != 2) {
 usage("Incorrect number of parameters.");
 int arraySize = -1;
try {
 arraySize = Integer.valueOf(args[1]).intValue();
 if(arraySize <= 0)
 usage("Negative array size.");
catch(java.lang.NumberFormatException e) {
usage("Could not number format ["+args[1]+"].");
PropertyConfigurator.configure(args[0]);
int[] intArray = new int[arraySize];
logger.info("Populating an array of " + arraySize + " elements in" +" reverse order.");
for(int i = arraySize -1 ; i >= 0; i--) {
 intArray[i] = arraySize - i - 1;
SortAlgo sa1 = new SortAlgo(intArray);
sa1.bubbleSort();
sa1.dump();
// We intentionally initilize sa2 with null.
SortAlgo sa2 = new SortAlgo(null);
logger.info("The next log statement should be an error message.");
sa2.dump();
logger.info("Exiting main method.");
static void usage(String errMsg) {
 System.err.println(errMsg);
 System.err.println("\nUsage: java org.apache.examples.Sort " + "configFile ARRAY_SIZE\n"+
"where configFile is a configuration file\n"+" ARRAY_SIZE is a positive integer.\n");
System.exit(1);
and
SortAlgo.java
==========
package examples;
import org.apache.log4j.Category;
import org.apache.log4j.NDC;
Example code for log4j to viewed in conjunction with the {@link
examples.Sort Sort} class.
SortAlgo uses the bubble sort algorithm to sort an integer
array. See also its source
code.
@author Ceki Gülcü */
public class SortAlgo {
final static String className = SortAlgo.class.getName();
final static Category CAT = Category.getInstance(className);
final static Category OUTER = Category.getInstance(className + ".OUTER");
final static Category INNER = Category.getInstance(className + ".INNER");
final static Category DUMP = Category.getInstance(className + ".DUMP");
final static Category SWAP = Category.getInstance(className + ".SWAP");
int[] intArray;
SortAlgo(int[] intArray) {
this.intArray = intArray;
void bubbleSort() {
CAT.info( "Entered the sort method.");
for(int i = intArray.length -1; i >= 0 ; i--) {
NDC.push("i=" + i);
OUTER.debug("in outer loop.");
for(int j = 0; j < i; j++) {
 NDC.push("j=" + j);
 // It is poor practice to ship code with log staments in tight loops.
 // We do it anyway in this example.
 INNER.debug( "in inner loop.");
if(intArray[j] > intArray[j+1])
 swap(j, j+1);
 NDC.pop();
NDC.pop();
void dump() {
if(! (this.intArray instanceof int[])) {
DUMP.error("Tried to dump an uninitialized array.");
return;
DUMP.info("Dump of integer array:");
for(int i = 0; i < this.intArray.length; i++) {
DUMP.info("Element [" + i + "]=" + this.intArray);
void swap(int l, int r) {
// It is poor practice to ship code with log staments in tight
// loops or code called potentially millions of times.
SWAP.debug( "Swapping intArray["+l+"]=" + intArray[l] +
 " and intArray["+r+"]=" + intArray[r]);
int temp = this.intArray[l];
this.intArray[l] = this.intArray[r];
this.intArray[r] = temp;
This program expects a configuration file name as its first
argument, and the size of the array to sort as the second and last
argument. See its source
code for more details.
please help me how can write that configuration file
thanks

Hi bala,
check that log4j manual I pointed to in yer previous thread.
This is a pot-boiler config file... Copy it into some file say "props.conf" and use it.
# Set root logger level to DEBUG and its only appender to A1.
log4j.rootLogger=DEBUG, A1
# A1 is set to be a ConsoleAppender.
log4j.appender.A1=org.apache.log4j.ConsoleAppender
# A1 uses PatternLayout.
log4j.appender.A1.layout=org.apache.log4j.PatternLayout
log4j.appender.A1.layout.ConversionPattern=%-4r [%t] %-5p %c %x - %m%nCheers,

OTC ssl.conf file does not have ssl wallet file location details

Hi B2B Gurus,
While doing the HTTPS configuration in OTC we observed that some of lines were missing in ssl.conf file located at <Oracle_Home>\Apache\Apache\conf. The below mentioned lines are missing in OTC’s ssl.conf but present in OracleB2B’s ssl.conf
Even ssl wallet file location is also missing in OTC ssl.conf file as mentioned below.
Can u please let us know as why these lines are missing or should we manually add these lines when we do HTTPS on OTC ?
Listen 4444
<VirtualHost default:4444>
# General setup for the virtual host
DocumentRoot "E:\Oracle_b2b\cachehome\Apache\Apache\htdocs"
ServerName DSCP17506.TechMahindra.com
ServerAdmin [email protected]
ErrorLog "|E:\Oracle_b2b\cachehome\Apache\Apache\bin\rotatelogs logs/error_log 43200"
TransferLog "|E:\Oracle_b2b\cachehome\Apache\Apache\bin\rotatelogs logs/access_log 43200"
Port 443
# SSL Engine Switch:
# Enable/Disable SSL for this virtual host.
SSLEngine on
# SSL Cipher Suite:
# List the ciphers that the client is permitted to negotiate.
SSLCipherSuite ALL:!ADH:!EXPORT56:+HIGH:+MEDIUM:+LOW:+SSLv2:+EXP
# Server Wallet:
# The server wallet contains the server's certificate, private key
# and trusted certificates. Set SSLWallet at the wallet directory
# using the syntax: file:<path-to-wallet-directory>
SSLWallet file:E:\Oracle_b2b\cachehome\Apache\Apache\conf\ssl.wlt\default
# Certificate Revocation Lists (CRL):
# Set the CA revocation path where to find CA CRLs for client
# authentication or alternatively one huge file containing all
# of them (file must be PEM encoded)
# Note: Inside SSLCARevocationPath you need hash symlinks
# to point to the certificate files. Use the provided
# Makefile to update the hash symlinks after changes.
#SSLCARevocationPath conf\ssl.crl
#SSLCARevocationFile conf\ssl.crl\ca-bundle.crl
# Client Authentication (Type):
# Client certificate verification type and depth. Types are
# none, optional and require
#SSLVerifyClient require
# Access Control:
# With SSLRequire you can do per-directory access control based
# on arbitrary complex boolean expressions containing server
# variable checks and other lookup directives. The syntax is a
# mixture between C and Perl. See the mod_ssl documentation
# for more details.
#<Location />
#SSLRequire ( %{SSL_CIPHER} !~ m/^(EXP|NULL)-/ \
# and %{SSL_CLIENT_S_DN_O} eq "Snake Oil, Ltd." \
# and %{SSL_CLIENT_S_DN_OU} in {"Staff", "CA", "Dev"} \
# and %{TIME_WDAY} >= 1 and %{TIME_WDAY} <= 5 \
# and %{TIME_HOUR} >= 8 and %{TIME_HOUR} <= 20 ) \
# or %{REMOTE_ADDR} =~ m/^192\.76\.162\.[0-9]+$/
#</Location>
# SSL Engine Options:
# Set various options for the SSL engine.
# o FakeBasicAuth:
# Translate the client X.509 into a Basic Authorisation. This means that
# the standard Auth/DBMAuth methods can be used for access control. The
# user name is the `one line' version of the client's X.509 certificate.
# Note that no password is obtained from the user. Every entry in the user
# file needs this password: `xxj31ZMTZzkVA'.
# o ExportCertData:
# This exports two additional environment variables: SSL_CLIENT_CERT and
# SSL_SERVER_CERT. These contain the PEM-encoded certificates of the
# server (always existing) and the client (only existing when client
# authentication is used). This can be used to import the certificates
# into CGI scripts.
# o StdEnvVars:
# This exports the standard SSL/TLS related `SSL_*' environment variables.
# Per default this exportation is switched off for performance reasons,
# because the extraction step is an expensive operation and is usually
# useless for serving static content. So one usually enables the
# exportation for CGI and SSI requests only.
# o CompatEnvVars:
# This exports obsolete environment variables for backward compatibility
# to Apache-SSL 1.x, mod_ssl 2.0.x, Sioux 1.0 and Stronghold 2.x. Use this
# to provide compatibility to existing CGI scripts.
# o StrictRequire:
# This denies access when "SSLRequireSSL" or "SSLRequire" applied even
# under a "Satisfy any" situation, i.e. when it applies access is denied
# and no other module can change it.
# o OptRenegotiate:
# This enables optimized SSL connection renegotiation handling when SSL
# directives are used in per-directory context.
#SSLOptions FakeBasicAuth ExportCertData CompatEnvVars StrictRequire
<Files ~ "\.(cgi|shtml)$">
SSLOptions +StdEnvVars
</Files>
<Directory "E:\Oracle_b2b\cachehome\Apache\Apache\cgi-bin">
SSLOptions +StdEnvVars
</Directory>
SetEnvIf User-Agent ".*MSIE.*" nokeepalive ssl-unclean-shutdown
# Per-Server Logging:
# The home of a custom SSL log file. Use this when you want a
# compact non-error SSL logfile on a virtual host basis.
CustomLog E:\Oracle_b2b\cachehome\Apache\Apache\logs\ssl_request_log "%t %h %{SSL_PROTOCOL}x %{SSL_CIPHER}x \"%r\" %b"
</VirtualHost>
Thanks for your help in Advance.
Regards,
Priyanka

Hi Ramesh,
We added the missing entries in ssl.conf file and tested it out. It is working fine. When we did slient install we are facing this error, we found that this is a bug in 10.1.2.3 AS patch (5983622) silent install. Raised an SR on this and Support is working to get this fixed.
Regards,
Priyanka

Rewriterule in httpd.conf file of oracle application server 10g r1

Hi Team
we had hack in our report server which is load balanced oracle report server and to fix this we found a patch . that was to rewrite the url for report server . but problem is we have virtualhost configure in our httpd.conf file because of that rewriterule is not working is anybody good with httpd.conf file and help us with this.
contact of httpd.conf file
<VirtualHost *:79999>
 ServerName xx.com
 Port 80
 DocumentRoot "/OraHome_1/Apache/Apache/htdocs"
</VirtualHost>
new entry we have put in
RewriteLog /OraHome_1/Apache/Apache/logs/rewrite_din.log
RewriteLogLevel 9
RewriteEngine On
RewriteCond %{QUERY_STRING} (.*)destype=file(.*) [NC]
RewriteCond %{QUERY_STRING} (.*)desname=(.*) [NC]
RewriteCond %{QUERY_STRING} !(.*)desname=/rep_des/[A-Za-z0-9](.*) [NC]
RewriteRule (.*)reports(.*)$ /forbidden.htm [R] [NC]
but still these entries are not working . it still going to old web page not to forbidden.htm
can you please help us .

Hi,
Make sure the value of the NLS_LANG environment variable is compatible with the default locale setting of the operating system.
Check the below links :
http://docs.oracle.com/cd/B14099_19/core.1012/b14004/iasconfig.htm#BHCJHBBB
Postinstallation Tasks
Thanks,
Sharmela

Where is the ojsp.conf file located

The tutorial is kind of misleading. The jsp file is ready and the tutorial tell me to do the following steps
Before you can run the application you need to make sure that your HTTP server is configured appropriately. Perform the following steps:
1. Edit the ojsp.conf in notepad. This file is typically found in the <ORACLE_HOME>\Apache\jsp\conf directory. Add the following alias:
BUT I DO NOT FIND ANY ojsp.conf file at all. I searched for it too. How to go forward on this.
Secondly my apache server is up and running when I hit http://hostname:7777
now under which directory should i place the folder containing the jps on the server to run the application
Thanks in advance

Hi Mthompson,
Look at this on how to create the log file.
http://winrichman.blogspot.com/search/label/xdodebug
am sure, you did not create the email/smtp configuration, thats why you see this error.

Changing to 64 bit soon anyone know the important conf files to bakup?

hello (:
been running arch for nearly half a year now
just got my ram upgrades..
Was thinking of changing to arch 64 bit
Any one know what conf file to backup? ..can help me on this please ?(:
xorg.conf
pacman.conf
any more to back up ..?
um..oh ya .. is it possible to migrate a system architecture ? like changing 32 bit to 64 bit?

maybe /usr/share/{icons,themes} too
also, if you're running a desktop machine, you may consider installing a 64bit kernel on your 32bit arch [ http://bbs.archlinux.org/viewtopic.php?id=66660 ] so you can use skype, google gears, google earth, wine, firefox with enabled tracemonkey without tricks. no point for 64bit on the desktop ATM IMHO.

Xorg.conf file after install? Where?

I know this is probably the worst question to ask but I couldn't find anything in the search for it. I just installed Arch (using a .7 CD) with an FTP install and naturally it chose the xorg7 version. His XServer starts alright but I noticed we both can't seem to find the xorg.conf file... usually it's in the /etc/X11/ folder (I think that's where it is on mine at home.)
The mouse, screen and almost everything works but for the life of me I can't find this configuration file. Does it use defaults if one doesn't exist or perhaps it's somewhere I'm not looking? Any advice would be appreciated as it isn't using the nvidia glx drivers but the basic nv.
Thanks in advance.
(Forgot to mention I'm used to using the X.org 6 version on my home PC and just trying to figure this out before I upgrade to 7.)

mac57 wrote:Alternately, you can just copy an old xorg.conf from another distro you have been using, place it in /etc/X11/xorg.conf and edit appropriately. This is what I did, and it worked like a champ.
You'll want to be carefull about that with xorg7. The path locations will change then. It may be better to generate a new one and copy in the difference in options.

Error in the isqlplus.conf file?

Is there anyone else out there that gets this message? Each time I try to run my HTTP server to access iSQL*Plus, I get:
"Syntax error on line 92 of c:/oracle/ora92/sqlplus/admin/isqlplus.conf: FastCgiServer: redefinition of a previously defined FastCGI server "c:/oracle/ora92/bin/isqlplus"
Does anyone know how I can adjust this config file, or otherwise fix this problem?
Other than that, the Enterprise edition is up and running, including the SQL Plus app.
Any advice is greatly appreciated.
Thanks!
Eric

Hi Alison,
Thanks for the response! Unfortunately, I tried both of these, and neither seems to apply:
http://otn.oracle.com/support/tech/sql_plus/htdocs/runtime.html#isql_duplicate_entriesAt first, I thought this would be the problem, since I installed twice, but there was only one oracle_apache.conf file in the directory...
http://otn.oracle.com/support/tech/sql_plus/htdocs/runtime.html#isql_mutex_errorThis one actually talks about a different config file. I'm getting errors on my isqlplus.conf file. It's saying that there's an error b/c of "FastCGIServer: Redefinition of a previously defined Fast CGI Server" Here's what the config file looks like on that (in relevant part):
# Maps all virtual paths beginning with "/isqlplus*" to the iSQL*Plus
# FastCGI application
<IfModule mod_alias.c>
ScriptAliasMatch ^/isqlplus(.*) C:\oracle\ora92\bin\isqlplus
ScriptAliasMatch ^/isqlplusdba(.*) C:\oracle\ora92\bin\isqlplus
<Directory "C:\oracle\ora92\bin">
AllowOverride None
Options FollowSymLinks
Order deny,allow
Allow from all
</Directory>
</IfModule>
The other reference to the FastCGI server is here: <<#
# Setup the iSQL*Plus FastCGI application.
<IfModule mod_fastcgi.c>
FastCgiServer C:\oracle\ora92\bin\isqlplus -port 8228 -initial-env iSQLPlusNumberOfThreads=20 -initial-env iSQLPlusTimeOutInterval=30 -initial-env iSQLPlusLogLevel=off -initial-env iSQLPlusAllowUserEntMap=none -idle-timeout 3600
</IfModule>
Not sure about where else this FastCGI Server might be called, but it looks like one of the definitions is typographically different from the other. Could this be the issue?
Eric

Mod_jk.conf file is NOT created

Hi Experts,
I am using Apache(2.0.40), JBOSS(3.0.3) and Tomcat(4.0.4) on IBM AIX 5.1 System.
After spending 1 week on Integrating Apache and Tomcat on IBM AIX System (and getting HELP from you guys from Mailing List), I finally builded "mod_jk.so" file for this platform.
I also configured Tomcat's "server.xml" and "workers.properties" file BUT when I start my JBOSS engine, "mod_jk.conf" file is NOT created automatically. I refereed the following document to configure that:
http://jakarta.apache.org/tomcat/tomcat-3.3-doc/mod_jk-howto.html
Do you experts have any suggestion/information as to why "mod_jk.conf" file is not created automatically? The above document says the file is CREATED AUTOMATICALLY once you start Tomcat!
Any related information on this would be appreciated.
THANKS!
Manoj G. Kithany
[email protected]

thanks, I have since figured this one out...
What I cant seem to do is get Apache to use Tomcat to serve any jsp's.
I have spent the last three days working with this and have gotten no where. I am rather frazzled and am about to abandon the thought of using anything Java for a long time.
Let me spell out what I have done for you:
#========================================================
C:\Java\Apache\Tomcat_4.1\conf\auto\mod_jk.conf
#========================================================
########## Auto generated on Fri Sep 13 18:46:55 EDT 2002##########
<VirtualHost localhost>
 ServerName localhost
 JkMount /manager ajp13
 JkMount /manager/* ajp13
 JkMount /examples ajp13
 JkMount /examples/* ajp13
 JkMount /tomcat-docs ajp13
 JkMount /tomcat-docs/* ajp13
 JkMount /webdav ajp13
 JkMount /webdav/* ajp13
 JkMount /admin ajp13
 JkMount /admin/* ajp13
</VirtualHost>#========================================================
C:\Java\Apache\Tomcat_4.1\conf\jk\workers.properties
#========================================================
# Start setup file
#==========================================================
workers.tomcat_home=C:/Java/Apache/Tomcat_4.1
workers.java_home=C:/Java/j2sdk1.4.0
ps=/
worker.list=MyWorker
#==========================================================
# Definition for MyWorker worker
#==========================================================
worker.MyWorker.port=8009
worker.MyWorker.host=192.168.0.2
worker.MyWorker.type=ajp13
worker.MyWorker.class_path=C:/Java/Apache/Tomcat_4.1/bin
worker.MyWorker.class_path=C:/Java/Apache/Tomcat_4.1/common/lib
worker.MyWorker.class_path=C:/Java/Apache/Tomcat_4.1/server/lib
worker.MyWorker.class_path=C:/Java/j2sdk1.4.0/lib/tools.jar
#==========================================================
# End setup file#==========================================================
C:\Java\Apache\Apache2\conf\httpd.conf
#==========================================================
about line# 212:
ServerName 192.168.0.2 # my internal ipat bottom of file:
LoadModule jk_module "C:/Java/Apache/Tomcat_4.1/module/mod_jk.dll"
Include C:/Java/Apache/Tomcat_4.1/conf/auto/mod_jk.conf
JkWorkersFile "C:/Java/Apache/Tomcat_4.1/conf/jk/workers.properties"
JkLogFile "C:/Java/Apache/Tomcat_4.1/logs/mod_jk.log"
JkLogLevel emerg
JkLogStampFormat "[%a %b %d %H:%M:%S %Y] "
JkMount /examples/*.jsp MyWorker
JkMount /examples/jsp/* MyWorkerWhen I put this URL in my browser:
http://192.168.0.2/examples/jsp/
I get a 404 error...
Apache keeps trying to serve the *.jsp's and it fails every time it trys to do so. I know this b/c the Tomcat logs are virtually empty while the Apache logs keep being added to like so:
192.168.0.2 - - [14/Sep/2002:19:04:57 - 0400] "GET /examples/jsp/snp/snoop.jsp HTTP/1.1" 404 294
Can anybody help me figure out how to configure Tomcat4.1 with Apache 2.0?

Can modprobe.d conf files be multiline?

Similar Messages

Maybe you are looking for