Can not create the node in Repository

Hi, 
I am trying to create a content node in BEA repository. But BEA is throwing following error:
Error creating Node: NODE NAME. Please verify the Node name size is within the Repository limits.
 
I have no idea why I am getting this error. I am creating node whose name is well under the size which is allowed by CM_NODE's node_name column. Have any one come across these kind of errors? Is there any place in portal administration where I can check for minimum/ maximum limits?
 
I really appreciate your help.
 
Thanks 
Sanjay

Hi All,
After wasting significant amount of time, I finally found the real cause of the problem. In our application, we have some indexes on CM_NODE table. Those indexes were in unusable state. So instead of giving that error, weblogic server was giving some other error as mentioned in the previous post which resulted in lot of wastage of time. But after looking at jdbc.log file, things got cleared up. So once we fix the indexes, every thing worked fine. Too bad that portal administartion tool could not throw that exact error in debugging console.
 
Thanks
 
Sanjay

Similar Messages

Can not create the connection in the enrironment!!

hello,every one:
please see the following code:
 Environment *env = Environment::createEnvironment(Environment::OBJECT);
 Connection *conn = env->createConnection(userName,password,connectString);
try
//use the conn
 catch (SQLException &ex)
 env->terminateConnection(conn);
 Environment::terminateEnvironment(env);
 throw;//re-throw
 env->terminateConnection(conn);
 Environment::terminateEnvironment(env);
 Environment *ev = Environment::createEnvironment(Environment::OBJECT);
//the program stopped here,display i can not create the new connection
 Connection *cn = ev->createConnection(userName,password,connectString);
 ev->terminateConnection(cn);
 Environment::terminateEnvironment(ev);
I have terminated the connection and the environment,then why I can not create the
connection in the new environment?
I have tried several times,if you connect the same database as the former,then it
does not work,but if you connect a new database ,it can create the new connection!
plus:I don't want to use conection pool .
Can I have some method to solve the problem?
Please help me!
Thanks a lot in advance!
tony from China

Hi Tony,
This similar sample works perfectly fine for me. Can you
retry with this?
#include <iostream>
#include <occi.h>
using namespace std;
using namespace oracle::occi;
int main()
 Environment *env = Environment::createEnvironment(Environment::OBJECT);
 Connection *conn = env->createConnection("scott","tiger","inst1");
 try
 //use the conn
 catch (SQLException &ex)
 env->terminateConnection(conn);
 Environment::terminateEnvironment(env);
 cout<<ex.getMessage();
 env->terminateConnection(conn);
 Environment::terminateEnvironment(env);
 Connection *cn;
 Environment *ev;
 try{
 ev = Environment::createEnvironment(Environment::OBJECT);
 cn = ev->createConnection("scott","tiger","inst1");
 catch (SQLException &ex)
 ev->terminateConnection(cn);
 Environment::terminateEnvironment(ev);
 cout<<ex.getMessage();
 ev->terminateConnection(cn);
 Environment::terminateEnvironment(ev);
}Rgds
Amogh

User can not create the quotation in PCUI

Dear All,
User salesrep is not able to create the quotation in PCUI. When he select the quotation tab and click on create button one pop up appears but no quotation appears in it and he can not select it for creating the quotation.
I have checked the authorization objects for this user. Seems everything is ok from authorization point of view.
User has authorization to create, display and delete for quotation in object CRM_ORD_LP.
Please help me regarding this.
Regards
Pankaj Vispute

Hi,
Please check whether u have assign transaction type of quotation and iviews to salesrep user from Portal admin and related portal role to u r User.
Regards,
DD's

Prime Infrastructure 2.0 can not create the guest account on WLC 5508

The PI can manage the WLC which means the connection between them is ok, but I am not able to create the guest account on it. The WLC has guest SSID with web auth configured correctly..
Any idea why?
Thanks!

raymond,
that's good to know that it required :
1) not only a RW community string
2) but also as well ssh credentials
i too would have thought option 1) would be all that was required but it doesn't appear that way w/ your response.
the only way i'll go to add devices in is by doing both SNMP RW and ssh at the same time.
now we know
thanks for pointing this out

I can not create EPS

Hello,
I have a problem in P6 EPPM V8.1. I can not create EPS nodes, when I try it an error message pop up telling me that Activity codes longer than 20 characters are not allowed but I revise all the projects already loaded and there aren´t codes longer than 20 characters. Can anybody tell me why is this happening? Is this a software bug?
Regards
Andres

Hi,
First of all check with your administrator whether you have the right privileges to create an EPS in EPPM. In release 8.1 the web version is called EPPM and the client is called Optional Client. All administrative works are done in EPPM. So for creating an EPS also you need to log in to EPPM.
If you have the privileges for creating an EPS then log in to P6 EPPM and go to EPS page under Projects tab. There you will find the button of creating Sibling EPS. You can also create a sibling or child EPS from Action menu > Add > Add Sibling EPS/Add Child EPS
Thanks,
Dip

Can not confirm the qty in schedule line in MTO case

Hi All,
I used item category ZTAN for Make-to-order purpose when I create the sales order. I set the KEVV for ZTAN in requirement assignment and requirement class 060 is assigned to KEVV.In 060 I set the availiablity is false, requirement transfer is true and Allocation Indicator = 3.
Then I do below transaction in SAP:
1/Create sales order
2/Run MRP
3/Generate the production order
4/GR against production order
5/Create delivery note
By the way, the strategy group for the my finished goods is 40.
But in the step 5, the system tell me that not confirmed qty in the order schedule line so that I can not create the Delivery. I go back to sales order and check the schedule line, but and press the button of Item Availiablity, the system can not confirmed the qty for the schedule line. Do any one know what probelm in my setting or oerations?? I will appreciate if any feedback. Thank you in advance.
Joe

Hi Friends,
Any comments please? It is quite urgent.
BR
Joe

Why I can not create PO confirmation in standalone scenario?

Dear experts,
I am in standalone scenario in SRM 7.03.
But why I can not create PO confirmation?
Please help on this.
Regards,
Hayashi.

Wendy ,
Thank you for your previous reply.
While, I am afraid I have to ask you more.
Why I can not create the PO confirmation ?
And I already checked the PO item information.
Wish your response.
Thanks
Regards,
Hayashi

FRM-10044 Can not create a file URGENT PLEASE!!

I installed Oracle 8i and Forms 6i in a pentium 4 changing the symcjit.dll -> symcjit.old.
Now I want to use the same scripts and Forms that I have saved using my old machine but I can't save new forms or update the old ones.
FRM 10044 Can not create the file
I can run the scripts in SQL.
Please Help me it is urgent.
I have installed and uninstalled the Data Base many times and I have read previous posts.
Thank you a lot.

Hi,
"Cannot Create File" means forms failed to create/save the file. Check the following
* Do you have full access to the drive?
* Did you mark either the form or its directory as read only?
Regards,
Momen.
Hi Helena,
How are you? We are into Arabic development environment. I am trying to migrate from 6i (CS) to 9i (web). Everything went fine but when I run the report, the browser is displaying junk characters.
Did you experience this problem?
If you have any suggestions you can mail me on [email protected]
Regards,
Momen.

7-zip can not create temp folder arcive

after downloading and running the download the dialog box woz
7-zip the message woz can not create the temporary folder archive.

After much messing around and frustration, I finally solved the problem by (1) uninstalling 7-Zip; (2) rebooting the computer; (3) reinstalling 7-Zip; (4) creating a 'temp' folder in the 7-Zip program; and (4) running the installation of Firefox directly from the download page instead of downloading it first onto my computer and running setup from the downloaded file. Worked like a charm.
FWIW: strangely enough, uninstalling 7-Zip and rebooting the computer did not get rid of the '7-Zip' error message when trying to install Firefox. I know next to nothing about how computers' innards work, but it struck me as bazaar that uninstalling 7-Zip and rebooting the computer didn't at least get rid of the 7-Zip error message.
Thanks to all for the suggestions

SAP RM: How can I create a Node when the node is not visible for the user

Hi,
Product: SAP records Management for Public Sector
Version: 7.00
is it possible to create a instance node when the model not is not visible for the active user?
I looked in the CL_SRM_XML_REC_MODEL but every methode I used gave me no results with the special user.
Regards and thanks for every beginning
Fanninger Thomas

Hi,
here an example.
When I use the method CL_SRM_XML_REC_INSTANCE->IF_SRM_XML_POID~GET_ALL( POID_TAB COUNT_USER_REST COUNT_POID_AUTH ).
When I used the user with no right for viewing the invisible nodes I get no elements in the tabelle POID_TAB and 38 in the value COUNT_USER_REST.
So did any one know a solution you can I create a nodes and change the restriction for the new node with the normal user?
Regards
Fanninger Thomas
Edited by: Thomas Fanninger on Feb 5, 2008 8:15 AM

HT5787 My apple id has been hacked. hacker has changed all information in the apple id so I can not change the password. Account information from the apple id created is still in my mail. How do I regain apple id. Thanks

My apple id has been hacked. hacker has changed all information in the apple id so I can not change the password. Account information from the apple id created is still in my mail. How do I regain apple id. Thanks

Contact Apple support: Apple ID: Contacting Apple for help with Apple ID account security

TS2167 i'm getting an error message.. can't create the file "header.jpg." The disk may be damaged or full, or you may not have suuficient access priveleges.

I need to publish to a local folder on my desk top and I am getting this error message.
can’t create the file “header.jpg.” The disk may be damaged or full, or you may not have suuficient access priveleges.
Please help... I need to copy to a disk... it was working fine until I attached a big project, I tried to delete the project, but still not workng.

Try the following:
1 - delete the iWeb preference file, com.apple.iWeb.plist, that resides in your
User/Home/Library/ Preferences folder.
2 - delete iWeb's cache file, Cache.db, that is located in your
User/Home/Library/Caches/com.apple.iWeb folder (Snow Leopard and Earlier).
3 - launch iWeb and try again.
NOTE: In Lion and Mountain Lion the Library folder is now invisible. To make it permanently visible enter the following in the Terminal application window: chflags nohidden ~/Library and hit the Enter button - 10.7: Un-hide the User Library folder.
OT

Can we create the Purchase order that using P&L account or just using account do not use cost center.

Dear Experts,
Could you please advise :
1) Can we create the purchase order that using profit and loss account ? ( if yes , which kind of account assignment category we should use ?)
2) How to create a purchase order for service charge .( just using GL account )
Thanks & Best Regards,
Watson

Hi,
   May I know why you do not use cost center for consumption?
   You may create a new account assignment category in OME9 by copying K and maintain the cost center as optional. Please note that you have to maintain the item category blank and the account assignment category combination in OMG0. Now, you can use a GL account in PO which doesnt require a cost center assignment (in OBC4 against the field status group of the GL)
   You may use the same account assignment category created in the previous step with item category D, after you maintain the combination of the account assignment with item category D in OMG0.
    Please test the scenario and revert back.
Regards,
AKPT

I can not create an Installer, After install the Vision Builder Demo and then uninstall it. I can not create a Labview installer anymore, it asks me for a Vision Builder Installer, even if My Labview program does not have nothing to do with it...

I can not create an Installer on LabView, After install the Vision Builder Demo and then uninstall it. I can not create a Labview installer anymore, it asks me for a Vision Builder Installer, even if My Labview program does not have nothing to do with it...
Solved!
Go to Solution.

Hi Shada this can happen if you are including additional installers to your installer for example DAQmx. When you are doing this the installer has to include other files like MAX (Measuremente and Automation Explorer). Probably when you installed Vision Builder it updated MAX, so when your installer is trying to Include MAX, its asking for the source where it was installed in your computer in this case Vision Builder.
Here you can cache the information so its not asked again, or you can download a newer version fo DAQmx, so it will update MAX and change de dependecy.
You can find more details about this issue in this KB:
KnowledgeBase 3S88PJMY: Why Do I Get A "Missing Distribution" Error When Trying to Build an Installe...
And for keeping a copy here is more info:
How Do I Stop the Missing Distribution Notification Each Time I Build An Installer?
Best Regards
Benjamin C
Senior Systems Engineer // CLA // CLED // CTD

I'm having trouble with custom ringtones. I have downloaded the free software "makeTones" and have created some ringtones. I then copied those to Mac and played them in ITunes. My Itunes does not have a ringtone tab. I can not sync the ringtones.

I'm having trouble with custom ringtones. I have downloaded the free software "makeTones" and have created some ringtones. I then copied those to Mac and played them in ITunes. My Itunes library does not have a ringtones tab. I can not sync the ringtones (or I don't know how)! Please help.

Yes, the file extension is M4R. Does it matter where I save these files on my Macbook? I then opened them in Itunes and played them. I did find the Tones folder in Itunes but the Tones or Ringtones tab does not show up when I select Iphone (within Itunes). When I open the Tones folder in the Library, it is empty. Thanks in advance for your help.

Can not create the node in Repository

Similar Messages

Maybe you are looking for