Can not find "Work Folder" in windows server standard edition
Guys, I have a testing lab and all is working with the exception of the fact that I can not find "work Folder" to install it. I'm using windows server 2012 standard evaluation copy edition. Normally work folder should be under >file
and storage service>file and iSCSI services. However, it is not there. Can someone help please
staphisco
Hi,
From the overview, Work Folder is not supported in Windows Server 2012 (only Windows Server 2012 R2).
Work Folders Overview
http://technet.microsoft.com/en-us/library/dn265974.aspx
Software requirements
Work Folders has the following software requirements for file servers and your network infrastructure:
A server running Windows Server 2012 R2 for hosting sync shares with user files
If you have any feedback on our support, please send to [email protected]
Similar Messages
-
Two instances can not simlutaneouly work together on Windows Server 2003 R2
Hi Gurus,
I installed Netweaver on a server which is already having ECC 6.0 which we are using on insctance 10 but i can work only one at a time if one is Up and running the other one should be down this is what am facing.
I have the developer trace log file. Pleaase see below and help me with this.Log below is for Netweaver that i installed and if ECC is UP it throws this in trace.
Total Physical Memory of server = 32 GB
Available Physical Memory of server = 11 GB
In task Manager it shows PF usage of 73 GB and total paging file size set for all drives is 44.98 GB.
LOG
trc file: "dev_disp", trc level: 1, release: "700"
sysno 20
sid NWC
systemid 562 (PC with Windows NT)
relno 7000
patchlevel 0
patchno 144
intno 20050900
make: multithreaded, Unicode, 64 bit, optimized
pid 13772
Wed Mar 04 16:06:10 2009
kernel runs with dp version 232000(ext=109000) (@(#) DPLIB-INT-VERSION-232000-UC)
length of sys_adm_ext is 576 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (20 13772) [dpxxdisp.c 1243]
shared lib "dw_xml.dll" version 144 successfully loaded
shared lib "dw_xtc.dll" version 144 successfully loaded
shared lib "dw_stl.dll" version 144 successfully loaded
shared lib "dw_gui.dll" version 144 successfully loaded
shared lib "dw_mdm.dll" version 144 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3920
Wed Mar 04 16:06:15 2009
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 5 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 5371]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >specsaptm_NWC_20 <
DpShMCreate: sizeof(wp_adm) 25168 (1480)
DpShMCreate: sizeof(tm_adm) 5652128 (28120)
DpShMCreate: sizeof(wp_ca_adm) 24000 (80)
DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
DpCommTableSize: max/headSize/ftSize/tableSize=500/16/552064/552080
DpShMCreate: sizeof(comm_adm) 552080 (1088)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm) 0 (104)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (72)
DpShMCreate: sizeof(vmc_adm) 0 (1864)
DpShMCreate: sizeof(wall_adm) (41664/36752/64/192)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: SHM_DP_ADM_KEY (addr: 000000000CD60050, size: 6348592)
DpShMCreate: allocated sys_adm at 000000000CD60050
DpShMCreate: allocated wp_adm at 000000000CD62150
DpShMCreate: allocated tm_adm_list at 000000000CD683A0
DpShMCreate: allocated tm_adm at 000000000CD68400
DpShMCreate: allocated wp_ca_adm at 000000000D2CC2A0
DpShMCreate: allocated appc_ca_adm at 000000000D2D2060
DpShMCreate: allocated comm_adm at 000000000D2D3FA0
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 000000000D35AC30
DpShMCreate: allocated gw_adm at 000000000D35ACB0
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 000000000D35ACE0
DpShMCreate: allocated wall_adm at 000000000D35ACF0
MBUF state OFF
DpCommInitTable: init table for 500 entries
ThTaskStatus: rdisp/reset_online_during_debug 0
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 4096 kByte.
Using implementation view
<EsNT> Using memory model view.
<EsNT> Memory Reset disabled as NT default
ERROR => <EsNT> CreateFileMapping name=ES_SEG_20_001 error=1455 [esnti.c 1184]
ERROR => <EsNT> paging file too small for 2044 MB mapfile [esnti.c 1186]
Memory diagnostic *
Systeminformation
Processor-Typ : Processor-Count : 16
Operating System : NT 5.2, Build 3790
Service Pack : Service Pack 1
NT Pagefile Informations
Config. minimum size : 47185920 K
Config. maximum size : 47185920 K
Avail. maximum size : 47185920 K
Num
Pagefile
Min.Size
Max.Size
Avail.Max
Curr.Size
1
c:\pagefile.sys
20971520 K
20971520 K
20971520 K
20955136 K
2
o:\pagefile.sys
15728640 K
15728640 K
15728640 K
15728640 K
3
s:\pagefile.sys
10485760 K
10485760 K
10485760 K
10485760 K
NT Task Manager Informations
Total Handles : 0
Total Threads : 0
Total Processes : 2027253931
Commit Charge Total : 0 K
Commit Charge Limit : 2143554319 K
Commit Charge Peak : 2047 K
Phys.Memory Total : 131657184 K
Phys.Memory Available : 0 K
File Cache : 2143594271 K
Kernel Memory Total : 2047 K
Kernel Memory Paged : 393225 K
Kernel Memory Nonpaged : 3851 K
Memory usage of current process
Total virt.address space : 0000008589934464 K
Avail.virt.address space : 0000008589043192 K
Private Pages : 0 K
Total heap size : 26229 K
Virtual memory regions : 0 K
Uncommitted heap memory : 16392 K
Allocated heap memory : 8196 K
Moveable heap memory : 2202 K
DDE shared heap memory : 0 K
Memory usage of all processes
PID
Image
Instance
Work.Set
WS Peak
Priv.Pages
PP Peak
Pg Fault
17072
sapstartsrv.exe
21452 K
21848 K
23768 K
23888 K
85
11308
msg_server.EXE
[MS] NWC_21
10624 K
10624 K
13984 K
13984 K
2
11712
enserver.EXE
[**] NWC_21
16476 K
16476 K
58040 K
58040 K
4
7116
msg_server.EXE
[MS] NWC_20
10960 K
10960 K
14432 K
14436 K
2
13772
disp+work.EXE
43272 K
43648 K
75636 K
82264 K
11
17560
igswd.EXE
[**] NWC_20
4108 K
4408 K
3208 K
3572 K
1
7072
igsmux.exe
14308 K
14308 K
18036 K
18072 K
3
16988
igspw.exe
3544 K
3544 K
4012 K
4012 K
0
5504
igspw.exe
3544 K
3544 K
4012 K
4012 K
0
Sum
128288 K
215128 K
Error 11 while initializing OS dependent part.
ERROR => DpEmInit: EmInit (1) [dpxxdisp.c 9634]
ERROR => DpMemInit: DpEmInit (-1) [dpxxdisp.c 9561]
DP_FATAL_ERROR => DpSapEnvInit: DpMemInit
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
NiWait: sleep (10000ms) ...
NiISelect: timeout 10000ms
NiISelect: maximum fd=1
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Mar 04 16:06:26 2009
NiISelect: TIMEOUT occured (10000ms)
dump system status
Workprocess Table (long) Wed Mar 04 10:36:26 2009
========================
No Ty. Pid Status Cause Start Err Sem CPU Time Program Cl User Action Table
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
0 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
1 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
2 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
3 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
4 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
5 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
6 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
7 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
8 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
9 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
10 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
11 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
12 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
13 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
14 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
15 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
16 ? -1 Free no 0 0 0
Dispatcher Queue Statistics Wed Mar 04 10:36:26 2009
===========================
--------++++--
+
Typ
now
high
max
writes
reads
--------++++--
+
NOWP
0
0
2000
0
0
--------++++--
+
DIA
0
0
2000
0
0
--------++++--
+
UPD
0
0
2000
0
0
--------++++--
+
ENQ
0
0
2000
0
0
--------++++--
+
BTC
0
0
2000
0
0
--------++++--
+
SPO
0
0
2000
0
0
--------++++--
+
UP2
0
0
2000
0
0
--------++++--
+
max_rq_id 0
wake_evt_udp_now 0
wake events total 0, udp 0 ( 0%), shm 0 ( 0%)
since last update total 0, udp 0 ( 0%), shm 0 ( 0%)
Dump of tm_adm structure: Wed Mar 04 10:36:26 2009
=========================
Term uid man user term lastop mod wp ta a/i (modes)
Workprocess Comm. Area Blocks Wed Mar 04 10:36:26 2009
=============================
Slots: 300, Used: 0, Max: 0
--------++--
+
id
owner
pid
eyecatcher
--------++--
+
NiWait: sleep (5000ms) ...
NiISelect: timeout 5000ms
NiISelect: maximum fd=1
NiISelect: read-mask is NULL
NiISelect: write-mask is NULLIf you installed the system with default memory parameters both instances will try to allocate 1/2 of the virtual memory on startup.
I suggest you decrease the parameter
es/initial_size_MB
to a value that both instances will fit into physical memory (so e. g. 4000). Then try to start both instances.
Markus -
Hi, Need help. I am trying to download the latest iTunes for Windows application but on running the program it says that it can not be completed as it can not find the folder location of the file "iTunes.msi" . Any clues would be appreciated
(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
(2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time? -
Since I updated or auto updated to Firefox 5.0.1 I get a windows error, can not find when I try to open Firefox from the icon.
It fixed opening Firefox, but when I click Yahoo mail or Hotmail I still get a error message. I only seen a Yahoo Messenger in file folder, which I changed like I did for Firefox with no results. Thanks for your help.
Wayne -
Can not find virtual copies in Windows folder.
I can not remember to have encountered this before, so here I go: I just created a virtual copy of some photos from my summer holiday, and all works well. But when I needed to access these photos going the Windows' way (Windows/My Pictures that is), the virtual copies do not appear in my YYYYMM folder. Going back to LR though, they will appear there with a /Copy 1 extension. RIghtclicking the VC, then "Show in Explorer" will highlight the original in the folder, the VC still not being there. Part of the frustration is that I can not remember this happening before (or maybe it has), so I'm wondering if I by accident have changed any settings.
Running LR 4.1 on Windows 7 64-bit.
Thanks in advance.Andrew Rodney wrote:
richardplondon wrote:
My only point, was an observation that there is very little actual practical difference between a virtual copy and a "master" ANYWAY.
So you have 1 master (an actual raw) and 10 VC’s. What happens to the VC’s if the master gets corrupted?
If your master has say Adobe Standard as the DNG Profile but the VC has a custom DNG profile, what happens to the VC if that profie goes missing or gets corrupted? Try it.
If by "master", you mean the Raw file on disk, then if that is corrupted (something I have never yet experienced IIRC; although I still backup against this possibility) then certainly, all images derived from that will suffer. However adding VCs does not increase the absolute risk of that. The way I was using "master", was to refer to the one LR metadata set which, unlike a VC metadata set, currently asserts a functional link to the source file. If that LR metadata set were to get corrupted, (something I have never yet experienced either IIRC, although I still backup against that possibility too) then I might be glad of a VC which I could immediately promote to that role and status instead.
Certainly bad things may happen to a VC if a required external file is lost or changed - but these are exactly the same bad things, as if the exact same events had happened for the "master" version alongside. I do take the point that there is protection in redundancy - no question - and also that instantly written-out metadata is a useful separate backup of one's work (as I mentioned, I'd be glad if VCs could get the same thing too somehow, someday).
One-to-many dependency on a single source file can make some good things happen too,though, which may be judged worth any potential added risks. Say deliberate changes are newly made to a Photoshop edit on which several LR image versions are based. These updates will ripple through all virtual versions automatically; whereas if these versions had instead been fully independent, the same changes would need to be made repeatedly to get the same result; assuming one wants all these versions to reflect the changes; which is (should be; needs to be) the realistic expectation, when one has opted to use a cluster of VCs in the first place. -
I was dragging a folder and now can not find the folder at all
Hello,
is there any way to find a folder that is now lost on my MacBook Pro. I was dragging the folder from the finder window to another folder using the mouse tracking on my MacBook Pro laptop. But I didn't get a chance to reach the other folder and lost the file. I check every where on the laptop using the search and nothing. Even check the trash can nothing still. A folder containing about a 1000 pictures just vanish.
Please help me fiind this folder.
I am at lost.
DoelHi, would you believe that I did that too. I have the iimages on Lightroom so I keep typing in the file name and nothing. I am like going mad with this.
I don't even understand how a folder can disappear just like that. I have been up all night trying to do everything. The Mac is not like Windows where at least you have some history of what n where files could be.
I know I didn't go to the trash, because it didn't ask me and nothing of the sort of replacing folders or files.
I'm at a lost.
Thank you though. -
ORA-12516: TNS:listener could not find ... on Windows Server 2003
We are getting "ORA-12516: TNS:listener could not find available handler" while testing asp.net web application.
We have following configuration:
- A 10g database server on Windows Server 2000
- A Web Server running IIS6 on Windows Server 2003
- ODP.Net for 10g client installed on Web Server
we are testing our web app with 75 concurrent users, as far as I can tell we are closing connections in our app and open connection only while retrieving and saving records.
I saw this error very first time when we upgraded our web server to use 10g client. Before that we were using Oracle 9 client and have tested this app with 100 concurrent users without any error.
Does anyone can help or point a resource that can help to resolve this error?
Thanks.Hi,
You'll likely want to take that up with the networking folks as the error seems to be coming from the Listener.
How many connections does each instance of your app make? If you make the same number of connections via sqlplus for example rather than ODP, do you see the same results? I know creating 60 or sqlplus sessions may not be fun, but it will help determine if this issue is truly somehow related to ODP. It doesnt seem likely it would be, and if ODP can be removed from the picture, it will be that much easier to troubleshoot.
One thing I'd suggest though, is to make sure your app is cleaning up after itself properly to as to use resources efficiently. If you have access to My Oracle Support, see the following note:
Note 730678.1 Oracle Data Provider for .Net Best Practices
Hope it helps,
Greg -
Beginner:Why I can not find webConsole tab on my server?
Hi All,
Now I have set up Oracle,Sap J2EE engine,web AS 6.40 and can deploy common applications.But after I have developed one mobile application with MDK, I cannot find the webConsole tab(http://sap-server:50000/me/webConsole) on my server, thus I can not deploy my application.
Do I need any more packages?
If any document or tutorial available please send it to [email protected]
Appreciate you very much.Any hint will be very useful.
YuhuiLiu.Hi Yuhui Liu
Can you please check if your J2EE engine is running, and without any errors. Also check if the URL http://sap-server:50000/index.html displays the J2EE engine home page. If I understand your message correctly, you said after you developed an application you are not able to access the web console. But were you able to access it before that??
Please check the following link for documentation
http://help.sap.com/saphelp_nw04/helpdata/en/27/095904caf7964ebfbb969a910517ee/frameset.htm
Best Regards
Sivakumar
Message was edited by: Sivakumar V
Message was edited by: Sivakumar V -
how can i uninstall windows 8.1 preview from my macbook pro?? ive looked for over an hour for the readme file for the windows 8.1 preview and have had no luck. ive done almost everything i can think of at the moment and nothing is working. somebody please help, thanks
Windows 8.1 Preview cannot be uninstalled. However, if what you want is to remove Windows completely, start up in OS X, open Boot Camp Assistant (in /Applications/Utilities) and follow the steps to remove the Windows partition.
If what you want is to install the final Windows 8.1 version, read this Microsoft support article > http://windows.microsoft.com/en-us/windows-8/update-from-preview -
Can not sync my iPod. Can not find a specific folder. What do I do?
I want to sync my iPod. Connect iPod to your computer, the iPod says that is not sinhronezatsiya otklyuchaye device, I go to itunes, the iPod loading to remove the device from the computer and the computer screen when sinhronezatsii some time out two windows: "Can not sync iPod" iPod ". can not find a disk," and "Can not sync iPod" iPod ". can not find the folder you want." What do I do?
Restores the system also writes.Contact itunes support.
-
I can not find library/application support folder for garageband
Hi,
i am trying to install au plug ins to garageband but i can not find the folder library/application support/audio
please help
Many ThanksThat was for audio plug-ins.
Here is the Application Support:
Here is the Path: Hard drive --> Library --> Application Support --> Garageband -
Firefox says it can not find the server (Windows Internet Exployer works fine
When I try to connect to Firefox,I get the message can not find server.(All my hardwired computers,to Dsl).When we try Windows Internet Exployer it works fine.That is what I am using to send this message.
Not sure of your answers: is the problem solved (as marked) or not.
Did you go through the solution for the Firewall that you use.
:http://kb.mozillazine.org/Firewalls
When you say it works okay on new browser do you mean IE or do you mean if you reinstall Firefox. As far as I know it is the Firefox updates that get are mostly affected. What Firewall do you have.
Also see
:http://kb.mozillazine.org/Error_loading_websites#Other_security_programs -
Hi. I have updated my computer to Windows 8.1 and now suddenly my Apple TV can not find the computer, it says "turn on the home sharing". Both of these are on, iTunes and Apple TV, what to do? It was working perfect before update.
Thanks in advance.Make sure the firewall and wifi router is not blocking it you can likely see if its the wifi router by connecting by etherent cable that would mean itsopen in terms of ports
-
After installing the latest update - automatic updates and after rebooting without any error, the finder application can not open any folder or device anymore.
Seems the appication crashes after which the following pop-up appears :
Anybody any idea ?I would do the following:
Reinstalling Lion Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion: Select Reinstall Lion and click on the Continue button.
Note: You can also re-download the Lion installer by opening the App Store application. Hold down the OPTION key and click on the Purchases icon in the toolbar. You should now see an active Install button to the right of your Lion purchase entry. There are situations in which this will not work. For example, if you are already booted into the Lion you originally purchased with your Apple ID or if an instance of the Lion installer is located anywhere on your computer. -
WLAN driver fails to install on G580 Windows 7 x64 with error "BCM4313: Can not find setup file"
Summary:
I have installed Windows 7 Ultimate x64 on my G580. Everything is working fine except the WLAN driver fails to install with the error "BCM4313: Can not find setup file".
Details:
I bought lenovo G580 with Windows 8. Since my parents are not comfortable with the learning curve of Win 8, I successfully downgraded to Windows 7 Ultimate x64. Everything is working fine but my WLAN card is not recognized because of lack of driver.
The lenovo parts look-up page says I have broadcom WLAN card - CBT BCM4313 MOW HMC WLAN
I looked at lenovo driver downloads site and tried following driver files for Windows 7 and both of them failed to install with the following error. I tried installing other WLAN drivers also but they won't even install as required hardward is not there.
Error - "BCM4313: Can not find setup file"
Drivers Tried:
- http://support.lenovo.com/en_US/downloads/detail.page?DocID=DS028105
- http://support.lenovo.com/en_US/downloads/detail.page?DocID=DS028208
Any help about how to get past this error will be appreciated. The previous Widnows verison (Windows 8) is still on my hard-drive as windows.old folder. Let me know if I can copy a specific file from there.
Thank you.
BJS
Solved!
Go to Solution.Download this driver bcm4313
Start setup and extract the files.After that go to star menu/control panel/system/device manager.There you probably find out that network adapter driver is missing.Choose it and click with right mb for drop menu to show up.Select properties then Driver/Update Drivers...Select to load driver from computer hard drive and choose the path where extract files is.Default path is main partion C: and search for directory named Driver.
And yes...you get "Can not find setup file" error but dont worry.Files needed to instal driver are extract fine.
Maybe you are looking for
-
My friend just sold me her ipad she got Jan 2013. The software says its up to date with iOS5.1.1, but when i try to download certain app it tells me I need to update to iOS6.0 or later but when i go to the setting there are no updates. so how do I ad
-
Can I manage my iTunes Library from my iPhone?
I have a playlist in iTunes on my PC called 'iPhone', which is selected to sync with my iPhone 4. I tend to sync via WiFi because I often don't have access to the computer used to manage my library (it is used for streaming films to the TV). During t
-
Can not open flex application in IE
Dears, I met a problem as below. I login a pc client which restricted to access D drive (no read permission) and can not access internet as well. But, it is able to access the intranet servers. However, I found that I can not open the flex applica
-
IPhoto calendar upload problem
I am trying to purchase/upload a calendar. When transferring calendar the assembIy step work but then freezez on the upload. I have tried several times over the past 3 days. Having to re-click "buy now" to get to the upload window again. I purchase
-
Why is Firefox for Android and Nook HD+ such garbage?
it's very annoying, u can't save pages, the menu system sucks, the top is stupidly designed to hide after a few seconds, the tab system is stupidly hidden and confusing and hard to use! make it the way it is in windows, not this simpleton trendy crap