Can not get Flash to work

My computer was reimaged the other day and since then I have had to reinstall a number of programs.  Today when I tried to view an online show I found that my flash driver was no longer there.  I have tried to install it through the adobe site but not having any luck getting the program to run.
I have version 10,3,181,14 installed.  I have Windows 7 64 Bit systtem runing Professional.  I am using IE9.  In my C: drive under sys I have a Macromed folder with bot the Activex10 .exe file and Flashutil10 .ex file both of which have been installed.  During the download process it used Adobe Download Manager and when it seems to get towards the end it disappears and no further instructions are seen.
I go back into the shows and still it does not work.  Any ideas?  Much appreciated.

Ausbren wrote:
 During the download process it used Adobe Download Manager and when it seems to get towards the end it disappears and no further instructions are seen.
I think it would be best to start with a clean reinstall:
download the FP uninstaller from http://kb2.adobe.com/cps/141/tn_14157.html (save it to disk);
download the installer (EXE) from http://www.adobe.com/products/flashplayer/fp_distribution3.html (save to disk);
close all browser windows, then run the downloaded uninstaller, followed by the installer.
Now can you see the Flash animation (rotating red 'F') at http://www.adobe.com/software/flash/about/ ?

Similar Messages

  • Help, I can not get Flash Plyer to install.

    I have been working on this for 7 hours and can not get Flash Player to work.
    I have IE 9.0.8112.16421, Windows Vista, Disabled McAfee Virus and Firewall and run as administrator.
    Uninstalled Flash Player ( it did show up on my installed programs but when I checked with Adobe FP checker it did not show as installed.) I keep getting a notice that says I need to install the latest Flash Player.  Tried to update IE to IE 9.0 enhanced but I get the notice to install FP.
    I Shut down and reboot with all programs closed everywhere including tool bar.
    Started FP installer from desktop as administrator and went through Download manager and then install FP 10. I get message that says the installation is complete.  I Quit and reboot.  But  FP is not working.
    Checked internet tools -- security on Medium and internet on Medium.
    Is there a problem with Flash Player 10 and IE 9.0?
    Can anyone help?

    faneboda1 wrote:
     Started FP installer from desktop as administrator and went through Download manager and then install FP 10.
    That doesn't make sense; if you have saved the installer to your desktop, then then the DLM does not come into play.
    A few questions:
    what is your Windows version, and is it 32-bit or 64-bit?
    what files do you have in C:\Windows\system32\Macromed\Flash (32-bit) or C:\Windows\syswow64\Macromed\Flash (64-bit)?
    on IE, Tools, Add-ons, do you have Shockwave Flash Object, and is it enabled?
    can you see the Flash animation (rotating red 'F') at http://www.adobe.com/software/flash/about/ ?

  • I have a pioneer 50 inch plasma   I purchased new from the company back in 2005.   I tried to hook up an Apple Tv to the pioneer receiver that came with the TV.   I can not get it to work.   The receiver has two HDMI  inputs in the back.

    I have a pioneer 50 inch plasma + I purchased new from the company back in 2005.   I tried to hook up an Apple Tv to the pioneer receiver that came with the TV.   I can not get it to work.
    The receiver has two HDMI  inputs in the back.  However they say they are not for PC's.  Furthermore they must be set up by going to the home menu.    I tried everything, but I can not get the receiver to talk to the Apple TV. I even tried a connector that uses an HDMI to the Apple TV that has the other side of the cable as 5 RCA cables.  I could not get the receiver to see the Apple TV.   I have a newer TV in the house, it has no problem talking with the Apple TV.  But this older system seems to be handicapped in its ability to talk with the newer Apple TV system.
    My Email is [email protected] 
    Do you have any suggestions
    Thanks
    Bob

    I could not access the Apple TV on the television.   If I put the Apple TV directly into by TV, I have an external sound system (entertainment system), therefore I worry that I would by pass the audio.
    Thanks for taking your time to attempt to help!   Any more suggestions would be greatly appreciated.
    Bob

  • HT1203 i have tried this 6+ times to "How to share music between different accounts on a single computer" on my wifes mac and can not get it to work!! On my PC no problem but on the MAC it will not work, follow the instructions to the T but no go????

    i have tried this 6+ times to "How to share music between different accounts on a single computer" on my wifes mac and can not get it to work!! On my PC no problem but on the MAC it will not work, follow the instructions to the T but no go????

    It is almost as if the program does not exist on my computer. If I search for it, the only thing that comes up is the installer. I cannot find it anywhere despite the fact I have installed it numerous times, uninstalled it and conducted a fresh install, and the Adobe website checks says that it is installed.

  • Can't get Flash to work in my IE 9

    I Can't get Flash to work in my IE 9. I have gone through the other fixes from this site, but still can't get it to work.  Any suggestions?

    Have you tried the suggestions outlined in these two faqs?  If so, was the shockwave component found and enabled?
    Enabling Flash Player in Internet Explorer  
    ActiveX Filtering in Internet Explorer
    Thanks,
    Chris

  • I just bought the BDP-S1500 yesterday and can not get it to work via wireless

    I just bought the BDP-S1500 yesterday and can not get it to work via wireless????

    Hi BigDaddy317,
    Please the link below for further assistance in connecting your wireless device to the internet.
    https://us.en.kb.sony.com/app/answers/detail/a_id/33377/p/47329,47564,95482/c/65,66/kw/internet
    https://us.en.kb.sony.com/app/answers/detail/a_id/35983/p/47329%2C47564%2C95482/c/65%2C66/kw/internet
    Please let us know if you're getting the same result or the error messages that you see.
    Thanks,
    >Joffrey
    If my post answers your question, please mark it as "Accept as Solution"

  • My apple Id has been disabled. I have relogged on changed password and still can not get it to work on my Iphone

    My apple Id has been disabled. I have relogged on changed password and still can not get it to work on my Iphone

    Contact itunes support.  Click Contact Us at the bottom of this page.

  • HT4108 I have a hdmi connector and can not get a picture to come on my tv. Need help also bought the RCA cables and can not get it to work with my iPhone 4 g

    I have a hdmi dock connector and can not get  it to show on my tv. It's a iPhone 4g please help also have a RCA cable to and can not get it to work either

    With what apps?  Not all apps require video output.

  • Can not get message to work om iPad, Can not get message to work om iPad

    Can not get message to work on iPad

    Please be much more specific. What exactly happens when you try to send a message?

  • I can not get NETFLIX to work, does anyone have any suggestions.

    can not get NETFLIX to work, does anyone have any suggestions...
    I have downloaded and installed Silverlight..
    and uninstalled it and reinstalled it...
    I have called Microsoft and also called Netflix support..
    who advised me to call Microsoft.
    Microsoft advised to to call apple
    seriously?
    HELP!

    Have you tried a different web browser like Mozilla FireFox?
    Have you tried just restating your Mac?

  • I can not get reader to work on xp.

    I have installed the 9 on  Reader and can not get it to work. I installed Fixit to see and it does not work either. Is there a place on XP that needs to be checked or opened. This started after the the computer was attacked by virus and they got into the registry. Had this repaired and this is what makes me think  something is  not opened for readers to work. Any ideas out there.

    chuck59c wrote:
    I have installed the 9 on  Reader and can not get it to work. I installed Fixit to see and it does not work either. Is there a place on XP that needs to be checked or opened. This started after the the computer was attacked by virus and they got into the registry. Had this repaired and this is what makes me think  something is  not opened for readers to work. Any ideas out there.
    Sounds like your sytem didn't get repaired. I would take it back to the tech that worked on it.
    In the meantime, you haven't mentioned what happens when you try and get it to work so we have no syptoms to go on to help you. Plus, what is fixit?
    There is no place on XP that you need to do anything special to get Reader to work so again, sounds like your system is still hosed.

  • HT4528 just bought a ringtone app but can not get it to work

    just bought a ringtone app but can not get it to work, I can get to putting on my desktop but after that it wont tranfer to my "tones"
    Angela

    Contact the app developer for support.

  • The air port on my imac went off and i can not get it to work

    my air port on the imac weny off and i can not get it to work now

    Apple used to use airport name for everything.. is this the internal wireless card?? Or external airport router?
    If it is the internal wireless card, is it still listed in system profile.. and do a hardware test with your original CD.
    See http://support.apple.com/kb/ht1509
    The problems with Mavericks are very great.. if you upgrade installed anything can happen.. a common feature is the internal wireless card fails to work.
    Give details and we can figure it out.
    Here is discussion about the same thing as I think has happened to your imac in macbook.
    https://discussions.apple.com/thread/5219345?tstart=30

  • I dont know if anyone can help me but l can not get itunes to work on my computer

    i have uninstalled itunes and installed it again but l still can not get it to work on my computer . Can anyone help ?

    i have uninstalled itunes and installed it again but l still can not get it to work on my computer . Can anyone help ?

  • I can not get itunes to work on my Windows 7 32.

    Itunes was working fine until the update came into play for the 10.5 and I can not get itunes to work now. All I get is an error message saying it's not loaded correctly and error 7 and errror 5 =>> this is really getting hard to deal with cause I have deleted and added it back so many times I feel silly.. Please tell me someone out there can help me fix this problem...

    See the further information area of Troubleshooting issues with iTunes for Windows updates for download advice and direct links.
    tt2

Maybe you are looking for

  • Mapping 1D array of sensor data to a 3D graphical model

    does anyone have any ideas how to approach this matter in LabVIEW. I have a measurement that is an array of 1D values. I would like to display that 1D array of values as points of specific color on a 3D model of some sort. What is the best software t

  • Importing interlaced vs. progressive MTS for FCPX

    I've been doing to jewelry product video with my new Handycam HDR CX-160, and have run into a hurdle with FCPX. For some reason, FCPX won't allow me to import progressive scan MTS files from the camcorder. Why? FCPX has no trouble at all recognizing

  • Changing default image tracing settings...

    I am doing image tracing - and when placing it into a recorded action, it only does the default tracing settings.  Is there a way to adjust these?  I cannot seem to find it.  Thank you!

  • CRM 5.0 MSA - create new sBDOC

    Dear Gurus, we are working with CRM 5.0 MSA and we must create the new sBDOC custom. Can you, please, we indicate the documentation or example about new sBDOC? Thank you very much, Maddalena

  • Bill of Materials style query ( hierarchical query question)

    Hi, I'm having difficulty trying to SQL query for the following. *(1) Outline of proposed table design* SERVERS SERVER_ID SERVER_DESC etc. SERVER-MAJORCOMPONENTS SERVER_ID COMPONENT_ID SERVER-PARTS COMPONENTS_ID PARENT_COMPONENT_ID COMPONENT_DESC etc