Mapping 1D array of sensor data to a 3D graphical model

does anyone have any ideas how to approach this matter in LabVIEW.
I have a measurement that is an array of 1D values.
I would like to display that 1D array of values as points of specific color on a 3D model of some sort.
What is the best software to create the 3D model, what is the easiest way to map my values to the points on that model.
Thanks,
Maciej

You can use a wrl file with the 3D picture control. How you map your values is optional. I have used color coded sphere at the locations of interest.
Have fun,
Ben
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction

Similar Messages

Mapping sensor data to process flows

Hi,
I´ve implemented a sensor-action that uses a JMS-queue to report its data. I´ve specified a few sensors in the process I´m calling as well as all processes called by that first one.
This is ment to monitor the process workflow resulting in a graph that represents the flow of the different processes visited.
To get to the point: when that first process is called twice (or even more often) at a time I get a whole bunch of sensor data, but cannot distinquish their origin - either from the first flow or the second one. Since I´m using not only one process I cannot use the instance-id as a reference. I was thinking of passing sort of a generated id (timestamp) through all processes.
Any ideas or suggestions?
Thanks in advance,
Max

You can use a wrl file with the 3D picture control. How you map your values is optional. I have used color coded sphere at the locations of interest.
Have fun,
Ben
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction

Mapping of PLSQL table type Date to java

i am having problem in mapping plsql table type DATE in java,
able to execute procedures which return plsql table type NUMBER,VARCHAR.
i am using oracle 9 , jdk1.4, oci driver, windows 2000.
sample code:
registering:
st.registerIndexTableOutParameter(15,100,OracleTypes.DATE,1000);
st.registerIndexTableOutParameter(16,100,OracleTypes.DATE,1000);
st.execute();
getting out params in arrays:
java.sql.Date[] O_lSubFolder_CrOn=(java.sql.Date[])java.sql.Date[] st.getPlsqlIndexTable(15);
O_lSubFolder_MdOn=(java.sql.Date[])st.getPlsqlIndexTable(16);
error while executing the code:
java.sql.SQLException: Invalid PL/SQL Index Table element type
at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:180)
at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:222)
at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:285)
at oracle.jdbc.driver.OraclePreparedStatement.checkPlsqlIndexTableBindTypes(OraclePreparedSt
atement.java:2705)
at oracle.jdbc.driver.OracleCallableStatement.registerIndexTableOutParameter(OracleCallableS
tatement.java:834)
can anyone help me to solve this problem.

i am having problem in mapping plsql table type
DATE in java,
able to execute procedures which return plsql table
type NUMBER,VARCHAR.
i am using oracle 9 , jdk1.4, oci driver, windows
2000.
sample code:
registering:
st.registerIndexTableOutParameter(15,100,OracleTypes.D
TE,1000);
st.registerIndexTableOutParameter(16,100,OracleTypes.D
TE,1000);
st.execute();
getting out params in arrays:
java.sql.Date[]
O_lSubFolder_CrOn=(java.sql.Date[])java.sql.Date[]
st.getPlsqlIndexTable(15);
O_lSubFolder_MdOn=(java.sql.Date[])st.getPlsqlIndexTab
e(16);
can anyone help me to solve this problem.1. Write a wrapper procedure that converts the table of dates to either number or date and then re-convert the table back into date.
2. Since it's an out param you could create a temp table, insert the contents of the index by array into it and return a cursor.
3. Create a oracle type using CREATE TYPE and then use an array of the type.
David Rolfe
Orinda Software

Mapping webservice result to a Data Type

Hi,
I receive an array of String objects as a result of a webservice call. These String Objects are XML documents (but as String Object...). How can I take each element of the array and extract all tags values to be mapped to a pre-defined Data Type? Have I to implement a parser in an UDF? How can I do the same mapping for each array cell automatically?
Thanks!

Use a simple XSLT to extract the xml document from a particular string.
Suppose the response XML is like:
<OutputMessage>
<string></string>
</OutputMessage>
Your xslt would be something like:
<xsl:template match="/OutputMessage/string">
<xsl:value-of select="." disable-output-escaping="yes"/>
</xsl:template>
If you have more than 1 string, create a root tag and extract all of them inside that tag.
Regards,
Henrique.

Error in mapping generation when using a data rule

I hope someone can point me in the right direction on this one. I've searched all over but can't find a similar problem anywhere.
This is OWB Client 10.2.0.1.31 and repository 10.2.0.1.0 in a 10g SE database . I have a table on which I have defined a data rule, which is deployed in the database along with its corresponding error table. The rule I have used is the built-in IS_DATE and it is applied to a VARCHAR2 field that will store a date in a specific format. I have defined the table as an operator in a mapping, and set the IS_DATE data rule action to MOVE TO ERROR. When I try to deploy the mapping I get the follwoing errors in the log:
Warning ORA-06550: line 244, column 4:
PL/SQL: ORA-00907: missing right parenthesis
Warning ORA-06550: line 221, column 3:
PL/SQL: SQL Statement ignored
Warning ORA-06550: line 3112, column 132:
PLS-00103: Encountered the symbol "DD" when expecting one of the following:
. ( ) , * @ % & | = - + < / > at in is mod remainder not
range rem => .. <an exponent (**)> <> or != or ~= >= <= <>
and or like LIKE2_ LIKE4_ LIKEC_ between || multiset member
SUBMULTISET_
The symbol "." was substituted for "DD" to continue.
When I look at the generated code, there are lines like this one:
not (wb_to_date("table"."column", Month dd, RRRR, Mon dd, RRRR, MM-DD-RRRR, MM/DD/RRRR, YYYY-MM-DD, YYYY/MM/DD) is not null
Why is OWB not putting single quotes around the data formats from the built-in data rule? Is there something fundamental I'm missing in my warehouse model?

Hi
This is bug 5195315, which looks to be fixed in a 10.2 patch. If you can pick up the latest 10.2 patch there is like 3 years of fixes worth picking up.
Cheers
David

Disk Utility - Partition map needs repair because a data partition needs loader space.

I just finished setting up both my OSX and Windows installs from scratch after fitting an SSD, which in-turn was right before my logic board died and Apple replaced it, now it looks like I have some sort of hard drive issue brewing.
This was my plan for the SSD, and how it currently displays in Disk Utility although that wasn't the case earlier:
And in Terminal:
My intention was to have two boot partitions for each OS, 'Macintosh HD' and 'Win 7 Pro' and a third shared data partition 'Projects' on the SSD, which I made in Drive Genius after installing Boot Camp. I don't want Macintosh HD accessible from Windows because I'll be using Paragon HFS+ or MacDrive to give write access and don't want OSs stomping on other OSs turf, hence needing three partitions. Everything looked fine until I just checked Disk Management under windows and realised it couldn't see the Projects volume. Even though it's fine in OS X, it was just marked black/unallocated space.
So I booted back into OSX, all my files look fine so I ran Disk Utility and the Partition tab looked really odd - unfortunately I didn't get a screenshot. All volumes reported their size correctly but visually, Macintosh HD took up most of the drive. I could see 'Windows 7 Pro' under this, but the Partition Layout section had a scrollbar, which if I scrolled down showed 'Projects' squished into a tiny gap at the bottom. I ran a Verify, which reported no problems, and at some time since the Partition Layout has reverted to how it should look (as in the screenshot above), with 'Projects' book-ended by "Macintosh HD' and 'Windows 7 Pro'.
Now when I run a Verify on Macintosh HD or Projects volumes, it says there's no problem, but if I run one on the drive, I get this message:
Volume Macintosh HD on disk0s2 has 0 bytes of trailing loader space and it needs 134217728 bytes
Problems were found with the partition map which might prevent booting
Error: Partition map needs repair because a data partition needs loader space.
I've only managed to find one other mention of this error here, but the fix is not relevant to me because I don't have Sophos installed. I've tried Single User/Safe Mode but it just boots into normal mode, so I can't do a fsck -fy.
** /dev/rdisk0s2 (NO WRITE)
Can't open /dev/rdisk0s2: Permission denied
That value in bytes is exactly 128mb, so I suspect the problem lies with one of the invisible partitions that show up in iPartition and Disk Management under Windows, but not in Disk Utility. I have backups and I suspect the root of the problem is partitioning in iPartition after installing Boot Camp, but I've never had issues with this approach in the past so I'm wary of just giving up and reinstalling Windows again will be massive hassle because I no longer have a SuperDrive and last time it refused to install from USB.
Anyone have any idea what's going on? It seems like the sort of issue Disk Utility should just handle, at least in Recovery mode, but it's not playing ball. It also doesn't seem like a massive problem since my files all look fine and performance is OK, so I'm reluctant to do anything major.
I'll update with a shot of the drive in Disk Management from Windows in a few minutes, in case that sheds light on anything. Thanks!

Similar issue here. I manually partitioned my hard disk for triple boot (using Gparted on Linux), then everything was just fine until I ran bootcamp, to do something as simple as create a boot USB.
I get the same error as a result and have to work my way into booting, by resorting first to a Linux live USB, then restarting from the live USB, to finally reach my rEFInd boot manager, or whichever boot manager should be initialized at startup.
I suppose that the cause in my case is that some operation "scratched" the protective MBR. See this:
http://www.mactech.com/articles/mactech/Vol.23/23.03/APMtoGPT/index.html
I am hoping to fix it using an external Yosemite installation media: see this guide -
http://www.macworld.com/article/2367748/how-to-make-a-bootable-os-x-10-10-yosemi te-install-drive.html
And as a last resort to reinstall.
I'll admit I am negatively surprised. I need this computer for professional reasons, and for the sake of "preserving the integrity of OSX", measures defined by Apple instead tend to make partitions far easier to damage. And this problem seems to affect a number of users.
As for what I have to go through to fix it: a 5GB download, during which I have to register my credit card to the Apple Store. "Pay first, get your free software next."
IF Disk Utility can fix it, from the external media, then fair enough. The hassle is unpleasant but it files as "a choice".
Otherwise you can file it safely under software design calamity.

Event Handling in labview with arrays as event data

Hey folks,
I have a Labview Application which uses a dll to read Ethernet data. The setup is such that, when the dll has fresh data it sends out an event to the Labview Application so that the fresh data can be displayed.
However i have only managed to get this event based mechanism to send out a single structure at a time. Hence if there are 10 fresh data values, i need to send out 10 events (each event structure contains the parameter name, parameter value, unit and time stamp). It would be more efficient to send out an array of structures in a sigle shot.
I have tried this but Labview keeps crashing saying that an error was encountered and Labview needs to close along with an access violation message. I did a lot of online searching and found some LV code for event handling but not come accross any implementation which uses arrays as evend data. Is this supoorted? And if so is there any example vi that can be shared so that i get some knowledge about this.
Many Thanks in adavance,
Abel.

I also gave a try by using a variant as the event data type instead of the cluster which contains the array of floats. I converted the cluster into a variant and used that to create the user event reference. Followed the same logic while decoding the dats.
But still the crash.... Here is the windbg output...
ModLoad: 07580000 075b7000 C:\Program Files\National Instruments\LabVIEW 2012\resource\lvalarms.dll
ModLoad: 0ca90000 0cb72000 C:\Program Files\National Instruments\LabVIEW 2012\resource\mesa.dll
ModLoad: 0c7f0000 0c7f9000 C:\Program Files\National Instruments\LabVIEW 2012\resource\lvuste.dll
ModLoad: 35000000 3509b000 C:\Program Files\National Instruments\Shared\TDMS\tdms.dll
ModLoad: 0c860000 0c87c000 D:\SapphireViewer\dll\SapphireClientDll.dll
ModLoad: 0e240000 0e2c7000 C:\WINDOWS\WinSxS\x86_Microsoft.VC80.CRT_1fc8b3b9a1e18e3b_8.0.50727.6195_x-ww_44262b86\MSVCP80.dll
ModLoad: 0e2d0000 0e36b000 C:\WINDOWS\WinSxS\x86_Microsoft.VC80.CRT_1fc8b3b9a1e18e3b_8.0.50727.6195_x-ww_44262b86\MSVCR80.dll
(1cb0.1a34): Access violation - code c0000005 (first chance)
First chance exceptions are reported before any exception handling.
This exception may be expected and handled.
eax=0e47f8b4 ebx=051f0040 ecx=051f0040 edx=061e5764 esi=22820840 edi=07b10040
eip=03c2050c esp=0e47f5cc ebp=0e47f810 iopl=0 nv up ei pl nz na po nc
cs=001b ss=0023 ds=0023 es=0023 fs=003b gs=0000 efl=00010202
*** ERROR: Symbol file could not be found. Defaulted to export symbols for C:\Program Files\National Instruments\LabVIEW 2012\resource\tdcore_12_0.dll -
tdcore_12_0!LvVariant:etContents+0xac:
03c2050c 837e3100 cmp dword ptr [esi+31h],0 ds:0023:22820871=????????
I cannot really tell whats going on. Looking for some pointers.
Regards,
Abel.

Problem in mapping from import manager to Data manager

hi friend's....I got a problem while mapping the data from import manager to Data manager .The problem is the data in import manager (i.e source hierarchy) will map to single filed in data manager ( i.e target hierarchy)..
Help me it will be great full to me
Regards
Yugandhar

Hi Ana,
If you have a hierarchy in this format:
N1            N2                 N3
A              A1                 A11
A              A2                 A21
A              A3                 A31
B              B1                 B11
Then u have to follow these steps for import.
1. Select source file and destination hierarchy table at top of import manager.
2. Go to Partitions tab (Second tab) Just above the tabs, if u click on the plus sign against your source file, you will see N1, N2 and N3. Cick on N1 and in partition tab, add N2 to right side by double clicking on N2.
3. Now add N3 to right side by double clicking on it.
4. Go to field mapping (Third tab). There you will see a field N1(Partition). Map this field to yourhierarchy field on destination side.
5. In value mapping (Below the field mapping), Expand your source hierarchy. Select all (ctrl + A). Click on "Add" button. Select "Add Branch as child" option.
6. Go to Matching tab (Fourth tab). only one field will be there. take ity on the right side. and select the import action as "Create".
7. Go to last tab. Click on import button.
Your hierarchy has been imported. You can check it in data manager (in hierarchy mode).
Hope this solves your problem.
Regards,
Dheeraj.

How to map an array to fixed fields using Biztalk mapper

I need to remap an array of objects like this:
<Root>
<ListOfObjs>
<Obj>
<Attr1>0000</Attr1>
<Attr2>Hello!</Attr2>
</Obj>
<Obj>
<Attr1>1111</Attr1>
<Attr2>Hello1!</Attr2>
</Obj>
</ListOfObjs>
</Root>
in an output like this:
<Root>
<Obj1_Attr1>0000</Obj1_Attr1>
<Obj1_Attr2>Hello!</Obj1_Attr2>
<Obj2_Attr1>1111</Obj2_Attr1>
<Obj2_Attr2>Hello1!</Obj2_Attr2>
</Root>
So in my XSD schema I have something like this:
Schema Input
<xs:element name="Root">
<xs:complexType>
<xs:sequence>
<xs:element name="ListOfObjs">
<xs:complexType>
<xs:sequence>
<xs:element name="Obj">
<xs:complexType>
<xs:sequence>
<xs:element name="Attr1">
<xs:simpleType>
<xs:restriction base="xs:string">
<xs:minLength value="1"/>
<xs:maxLength value="50"/>
</xs:restriction>
</xs:simpleType>
</xs:element>
<xs:element name="Attr2">
<xs:simpleType>
<xs:restriction base="xs:string">
<xs:minLength value="1"/>
<xs:maxLength value="50"/>
</xs:restriction>
</xs:simpleType>
</xs:element>
</xs:sequence>
</xs:complexType>
</xs:element>
</xs:sequence>
</xs:complexType>
</xs:element>
Schema output
<xs:element name="Root">
<xs:complexType>
<xs:sequence>
<xs:element name="Obj1_Attr1">
<xs:simpleType>
<xs:restriction base="xs:string">
<xs:minLength value="1"/>
<xs:maxLength value="50"/>
</xs:restriction>
</xs:simpleType>
</xs:element>
<xs:element name="Obj1_Attr2">
<xs:simpleType>
<xs:restriction base="xs:string">
<xs:minLength value="1"/>
<xs:maxLength value="50"/>
</xs:restriction>
</xs:simpleType>
</xs:element>
<xs:element name="Obj2_Attr1">
<xs:simpleType>
<xs:restriction base="xs:string">
<xs:minLength value="1"/>
<xs:maxLength value="50"/>
</xs:restriction>
</xs:simpleType>
</xs:element>
<xs:element name="Obj2_Attr2">
<xs:simpleType>
<xs:restriction base="xs:string">
<xs:minLength value="1"/>
<xs:maxLength value="50"/>
</xs:restriction>
</xs:simpleType>
</xs:element>
</xs:sequence>
</xs:complexType>
</xs:element>
In addiction I have to evaluate every single value because when I found some conditions (like if value=0000 output should be NULL).
What would be the best way to do it? I'm thinking to develop a custom functoid but I'm not sure it would be the best way, probably it could be done even using XSLT inline transforms, can you point me in the best direction?
Thank you

Hi,
You cannot directly map an array output to any single field in BizTalk mapper.
Couple of options :
1) create
the Xslt or inline C# code
Refer:
http://seroter.wordpress.com/2008/10/07/splitting-delimited-values-in-biztalk-maps/
2) Shankycheil has
provided a solution to similar requirement in the below link, u can also refer that.
https://social.msdn.microsoft.com/Forums/en-US/55ec472d-4f34-4057-b1c6-0e50740f0f6e/how-to-itterate-string-array-values-in-biztalk-mapper?forum=biztalkgeneral
Rachit
Thank you, I already seen both posts, but I'm not sure they are what I need or I can't understand well how to use them.
Speaking about the first solution, as I told before, in the example I should have an array already formed and delimited by a char (something like "obj1attr1-obj1attr2-ob2attr1-obj2attr2". In this situation probably this example could be a good
point to start from, but how to transform my complex input object in a similar formatted string?
About the second I don't understand well what is the working solution that they have adopted. Is the 4 steps solution suggested by Shankycheil? If yes, how can I loop between all array elements and extract all their values?

Mapping Java Arrays

I was given an object model generated by an apache product, Axis. The generated java files use the Java Array in the following fashion:
Class Zoo {
private ArrayOfAnimals animals;
// â¦ public get/set methods cut
Class ArrayOfAnimals {
private Animal animals[];
// â¦ public get/set methods cut
Class Animal {
private String name;
// â¦ public get/set methods cut
I was tasked with mapping the one-to-many relationship between zoo and an array of animals using the Animal array. I canât find a mapping in TopLink to do this type of association. I am NOT allowed to modify the generated source code. I may be able to extend the generated classes, and perhaps provide a different superclass.
I am allowed to create the relational model for these domain classes. Can anyone help with this type of mapping?
Thanks

TopLink does not directly support arrays as the mapping type for a collection, only collection types that support the Collection and Map interfaces.
In general it seems odd to use an array instead of a Java collection which would be much more efficient (in terms of adding and removing) and much more functional. I would definitely suggest changing the generated code, or the way the code is generated if at all possible.
The easiest way to map the array in TopLink would be the use get/set methods for the 1-m mapping on the Zoo class that converted the array to/from a Collection.
i.e. something like,
public List getAnimalsList() {
return new Arrays.asList(animals.animals);
public void setAnimalsList(List list) {
animals.animals = (Animal[]) list.toArray();
In general TopLink uses its ContainerPolicy class to handle collections. It may also be possible (but advanced) to write a custom container policy for your 1-m mapping that handles arrays.

Populating a javascript array with datatable data

I want to populate a javascript array with datatable data.
How do I do this?
I want the javascript array to be populated as the datatable is displayed.
Doing this way doesn't work.
<h:dataTable value="#{pmManager.profiles}" var="pmProfile" binding="#{pmManagerUiBean.uiTable}" ">
<script>
allProfilenames[index]='#{pmProfile.profileName}';
          alert("index ="+index);
          alert("...1"+allProfilenames[0]);
          alert("...2"+allProfileRes[0]);
          index++;
</script>
<h:dataTable>

In Javascript do something like this:
document.getElementById('form1:dec_param');
where form1:dec_param is the id of the component on the page source (html)

How to build a array with collected data

Hi,
I have collected data from serial port with VISA. Now I want to build a array with 100 date points. Should I connect VISA Read with Build Array directly? How to do it?
PS: All of them are in a While Structure.
Thank you!

An inefficient way to create the array is to use the build array and a shift register as shown below. It's more effecient in terms of memory management to create the array and then use the replace array subset as shown in the other image. Of course, if you don't need the array inside the loop, just wire the value out of the while loop and on the exit tunnel, right click and select 'Enable Indexing'.
Message Edited by Dennis Knutson on 07-03-2007 10:25 PM
Message Edited by Dennis Knutson on 07-03-2007 10:26 PM
Attachments:
Crude Build Array.PNG ‏4 KB
Better Build Array.PNG ‏6 KB

I2C interface (Sensor Data Acquisition) LabVIEW

Hi all!
Hope you are doing great!
Well I have a question which is more about asking all you for an idea!
The Situation:
I have a circuit board which has an On-Off Valve, Digital pressure sensors (manufacturer AMD) and Humidity/Temperature Sensors (make- IST Hygrosens). On the board all the sensors communicate as I2C slave devices and all the data from the sensors is read into an I2C --> USB adapter chip which further connects to the PC via normal USB cable.
Additional to this board, There is a Relay circuit with a simple 1-pole relay which controls an on-off valve on the above Circuit board. This valve is controlled totally separate via a coaxial cable from the relay directly to the Valve. But the relay board has a I2C interface and it also acts as a slave device. The relay board has the same I2C --> USB adapter chip.
Both the Relay board and Sensor board connect via USB to the PC which I suppose is the Master device.
The software code written for this arrangement and Sensor data acquisition is too old and there are a lot of problems coming. I have almost given up troubleshooting..
I now want to translate this automation system onto LabVIEW. I searched the NI website where there is a DAC card called - USB8451 which supports I2C interface... I am a beginner in LabVIEW and cant really make sense out of how should I go about implementing this system on LabVIEW..
If you guys can please help me out to atleast start (like what all hardware I would need etc..), to have a clear picture, it would be great help!!
Looking forward to your inputs and Thank you so much in advance!
Cheers!
Pramit

NI provides a LabVIEW API for the USB8451. If you use the USB8451, you would use the provided API to write a program that controls the USB8451 and you would do all of the I2C communication in your program. This would mean using functions / SubVI's to connect to the USB8451 and then perform I2C operations through it.
If you use USB already on your device, then you would probably use NI-VISA as the driver and have to get / write your own API to talk to the specific device. The manufacturer may have a LabVIEW (or other) API available for talking to the device that you could get. If not, then you would have to understand the details of how to communicate with the device and then write an API using NI-VISA serial functions. This would mean making NI-VISA be the assigned driver for the device and then using VISA Serial functions / SubVI's to send the messages and receive the responses.

I want to build an array using the data that I get through the serial port

I am reading data through the serial port, but I want to buffer these data. I have seen a function, but i think that i can use this if I am reading data from I/O intrument, so I don´t how can I fill an array, with the data that I am reading!!!
Thank you!!!

I'll hazard a guess that you are reading data with VISA as a string. Then you want to convert that (probably with Scan From String) into a number. Then, you want to collect those numbers into an array.
We don't really have enough information to tell you the best way to do this. Here are some ideas.
If you are reading all the numbers from the instrument at once (e.g., a waveform from a scope), you might consider using "Spreadsheet string to array". Most scopes return the data as ASCII with commas between the values, so you'd wire a "," to the "delimiter" input of the "Spreadsheet string to array" function.
If, however, the instrument is returning a single point at a time, there are more questions. Do you want to do this continuously, or do you want t
o collect only a certain number of data points, and then process them as a block?
If the latter, then you'd just acquire each data point, convert it to a number, and then use output indexing on the for loop to create your array.
If the former, then you may want to store the data in a queue, and read it from the queue elsewhere in your program.
If you let us know what you want to do, we can probably provide more precise help.
Brian

SD- conditions to be mapped to COPA value field data in BI

Hi Experts,
I have a req where in I have to map condition level Sales order data to some COPA value fields. Currently for one Sale order item there are multiple conditions that means multiple line items. But when I try to find the COPA value field for the same same (Sales order, Sales order item ) key I get only one line item.
This has to be done for BI integration, but needs to be done at the source system level.
So my questions are,
1) How can we get the condition level data from COPA? Is it possible to fetch the data at that granularity?
2) Is it possible to integrate SD & COPA data on condition level i.e. at Sales order, sales order item & condition level.

Hi,
In KEA0, Data structure tab click on pencil button (change view).
Then click on -> change
Now you will be able to select new value fields
Rememeber, after changing click on save, activate and then back button. system will ask for regeneration, click ok.
Regards
Raghu

Mapping 1D array of sensor data to a 3D graphical model

Similar Messages

Maybe you are looking for